求方产品索引

(产品按拼音顺序排列)门了月了一了一了︸了7 77一11了一才一了一了一了︵了Q曰O乃凸︹OC八吕no只︺八匕︹洲O口OC nOO门O口凡︺门了︻了乃了,︻‘︵了门了月‘︻了OC尺︺n6n洲︹伪O曰Q曰88686纯碱醋配﹃h6一b tz门IRC︹O︹门已凸己D冬青油锻锌包装桶对氟苯胺对硝基甲苯多乙烯多胺甲苯甲醇甲醇钠绞股兰皂贰金属钻精蔡酒精旧3K雷蒙机月了︵了︵了78 8 QLJ OCE二苯甲醛二甲胺二硫化铝二氯甲烷S三,五二硝基苯甲酞氯三混甲酚三氯化磷三甲胺盐酸盐三磷酸腺昔二钠三氯乙烯三氯甲烷十二烷基酚十六醇石油甲苯鼠标垫材料顺醉四氢吠喃四乙…     

物料自我粉碎技术初探

对球磨机的研磨进行了研究，提出了物料自我粉碎，降低了研磨成本，提高了研磨效率，既保证了料浆质量又节约了电耗。     

整流机组节能技术改造总结

介绍了整流机组的技术改造内容。通过改造,提高了装备技术水平,简化了操作,提高了供电的平稳性和安全性;降低了电力损耗;节约了能源。     

用磷酸进行活性炭后处理的探讨

本文介绍了用磷酸代替盐酸进行活性炭酸洗的方法,该法避免了环境污染,简化了工艺过程,改善了劳动环境,降低了产品成本,提高了产品质量。     

焙烧炉燃烧系统油改天然气研究与应用

介绍了炭素焙烧炉燃烧系统由燃油改为天然气的过程,以及使用效果和效益分析,真正实现了清洁生产,达到了理想的节能效果,改善了工艺水平、降低了生产成本、提高了生产效率、净化了工作环境。     

焙烧炉燃烧系统油改天然气研究与应用

介绍了炭素焙烧炉燃烧系统由燃油改为天然气的过程以及使用效果和效益分析,通过改造真正实现了清洁生产,达到了节能效果,改善了工艺水平,降低了生产成本,提高了生产效率,净化了工作环境。     

汽车内饰转向护板注塑模设计

本文基于CAD/CAE技术对汽车内饰件转向护板注塑模具进行了设计。运用Pro/E软件对模具进行了三维设计,使用Moldflow对模具进行了CAE分析,优化了浇口位置,合理设计了排气槽,提高了设计效率,创新了塑料模具设计方式。根据产品结构,采用动模中心凸起布局,应用斜顶机构实现侧抽芯,简化了模具结构,提高了模具设计质量,降低了制造成本。     

升降搅拌减速机性能改进

改造设计了升降搅拌减速机，使润滑方式更加合理，增加了扭矩，提高了强度，减少了磨损，性能更加完善，减少了维修费用，延长了运转周期。     

国外某1000t/d项目风扫生料磨调试

本文介绍了风扫生料磨的调试经验,通过改造出磨风管,降低了磨机通风阻力,增加了磨内通风量,提高了磨机的烘干能力;通过改造中心圆尺寸,增加了填充率,提高了磨机的出力,从而提高了磨机的产量,顺利实现了达产目标。     

煤制甲醇加碱工艺的技术改进

阐述了一种煤制甲醇加碱工艺的技术改进,解决了国内现有工艺技术弊端,降低了设备投资,缩小了占地面积,减少了操作人员劳动强度,减轻了环境污染,并通过了三年多的生产运行验证。     

Preparation and surface-active properties of the sodium soaps,mono- and diethanolamides and diol and triol sulfates of cycloaliphatic C21 Di- and C22 Tricarboxylic acids

Cycloaliphatic C₂₁ di- and C₂₂ tricarboxylic acids were prepared by the Diels-Alder reaction of dehydrated castor oil (DCO) fatty acids (containing 48% conjugated and 42% nonconjugated dienes) with acrylic and fumaric acids, respectively. The reaction temperature, time, catalyst concentration, and mole ratio of reactants were varied to get maximum yields of the di- and tricarboxylic acids. The unreacted DCO fatty acids were removed from the products by partition between aqueous methanol and n-hexane. The products were converted to methyl esters and characterized as the substituted cyclohexene derivatives before and after dehydrogenation with Pd/C in xylene, hydrogenation with Pd/C in decalin and oxidation with periodate-permanganate reagent and by mass and proton nuclear magnetic resonance spectrometry. The acids were converted to sodium soaps, mono- and diethanolamides and the corresponding diol and triol sulfates, and the resulting products were evaluated for their surface-active properties. The sodium soaps showed better calcium tolerance and poorer foaming power than sodium oleate. The diethanolamides were inferior to lauroyl diethanolamide in wetting and emulsifying power. The monoethanolamides were better than the respective diethanolamides and lauroyl diethanolamide in wetting property. The diol and triol sulfates were poorer in wetting and emulsifying ability and better in calcium tolerance than sodium lauryl sulfate.     

民用工业中复合材料桁架的应用和发展

本文叙述了复合材料桁架的构造、分类和计算方法,突出了复合材料桁架的优越性能和在民用工业中的应用前景;在分析大量文献资料的基础上阐述复合材料桁架杆件的多种加工工艺,并比较不同截面形式对杆件性能的影响;探讨复合材料杆件的破坏机理和分析方法,介绍节点的类型和各自的特点,提出节点及连接部位存在的关键问题;根据国内外复合材料桁架的研究和应用现状,阐述了复合材料桁架的性能和不同的设计方法,总结归纳影响复合材料桁架性能的关键因素和设计中存在的一些问题,并提出改进杆件设计、节点设计和优化复合材料桁架的建议。     

熟料岩相试样制作方法及典型岩相特征的形成原因

熟料的岩相分析有助于熟料质量的判断及生产过程控制调整。根据多年实践经验,总结了手工和机械磨制岩相试样的方法及注意事项,并对几种熟料岩相特征(孔洞、游离氧化钙、A矿包裹B矿和f-Ca O、晶体尺寸不均和矿巢)进行了举例和形成原因分析。     

Enzymes-Assisted Extraction of Plants for Sustainable and Functional Applications

The scientific community and industrial companies have discovered significant enzyme applications to plant material. This rise imparts to changing consumers’ demands while searching for ‘clean label’ food products, boosting the immune system, uprising resistance to bacterial and fungal diseases, and climate change challenges. First, enzymes were used for enhancing production yield with mild and not hazardous applications. However, enzyme specificity, activity, plant origin and characteristics, ratio, and extraction conditions differ depending on the goal. As a result, researchers have gained interest in enzymes’ ability to cleave specific bonds of macroelements and release bioactive compounds by enhancing value and creating novel derivatives in plant extracts. The extract is enriched with reducing sugars, phenolic content, and peptides by disrupting lignocellulose and releasing compounds from the cell wall and cytosolic. Nonetheless, depolymerizing carbohydrates and using specific enzymes form and release various saccharides lengths. The latest studies show that oligosaccharides released and formed by enzymes have a high potential to be slowly digestible starches (SDS) and possibly be labeled as prebiotics. Additionally, they excel in new technological, organoleptic, and physicochemical properties. Released novel derivatives and phenolic compounds have a significant role in human and animal health and gut-microbiota interactions, affecting many metabolic pathways. The latest studies have contributed to enzyme-modified extracts and products used for functional, fermented products development and sustainable processes: in particular, nanocellulose, nanocrystals, nanoparticles green synthesis with drug delivery, wound healing, and antimicrobial properties. Even so, enzymes’ incorporation into processes has limitations and is regulated by national and international levels.     

Effects of Extraction Temperature and Preservation Method on Functionality of Soy Protein

The effects of extraction temperature and preservation method on the functional properties of soy protein isolate (SPI) were determined. Four extraction temperatures (25, 40, 60, and 80 °C) were used to produce SPI and yields of solids and protein contents were determined. Three preservation methods were also tested (spray-drying, freeze-drying, and freezing–thawing) and compared to fresh (undried) samples for each extraction temperature. No differences in yields of solids and protein were observed among SPIs extracted at 25, 40, and 60 °C; however, SPI extracted at 80 °C yielded significantly less solids and protein. Extraction temperature significantly affected SPI functionality. As extraction temperature increased, solubility and emulsification capacity decreased; surface hydrophobicities, emulsification activities and stabilities, and dynamic viscosities increased; and foaming properties improved. Preservation method also significantly affected SPI functionality. Drying method did not affect the denaturation enthalpies of SPIs, but spray-dried SPIs had higher solubilities, surface hydrophobicities, and emulsification stabilities, and lower viscosities, emulsification activities and rates of foaming than freeze-dried SPI exhibited. Emulsification and foaming capacities and foaming stabilities were similar for both methods of drying. There was significant interaction between extraction temperature and preservation method for all functional properties except emulsification capacity.     

Role of Douglas fir (Pseudotsuga menziesii) carbohydrates in resistance to budworm (Choristoneura occidentalis)

The current year's growth of Douglas fir contains galactose, unusual in that this carbohydrate makes up 78.7% of the total carbohydrate fraction. An agar diet study was undertaken to determine the effects of galactose, other carbohydrates, and terpenes on western spruce budworm larval mortality, growth rate, and adult biomas production. All concentrations of the carbohydrates and terpenes tested, as well as other mineral elements not tested, were typical of the current year's foliage of Douglas fir. In experiment I, the diet containing 5.61% total carbohydrate did not significantly affect larval mortality when compared to the control diet. However, diets containing 9.45% and 15% total carbohydrate concentrations significantly increased larval mortality 64% and 96.1%, respectively, when compared to the control. Also in experiment I, terpenes alone (78.9% morality) and terpenes in combination with 9.45% and 15% total carbohydrates significantly increased larval mortality (97.2% and 100%, respectively) when compared to mortality on the control diet (44%). To determine which carbohydrate was causing the adverse effect, 6% glucose, 6% fructose, and 6% galactose were placed individually and in combination with terpenes in diets in experiment II. The 6% galactose diet significantly increased larval mortality and reduced growth rate when compared to the control, glucose, and fructose diets. Glucose resulted in 16% less larval mortality, significantly enhanced female larval growth rate and pupal weight, but did not affect male larval growth rate and pupal weight, when compared to the control. Fructose resulted in a significant decrease in larval mortality and a general trend of enhanced female and male larval growth rate and pupal weight. Larval mortality on terpenes alone was not significantly different from the control, but terpenes with 6% galactose increased larval mortality and decreased female and male growth rate and pupal weight significantly when compared to glucose-terpene and fructose-terpene diets. No significant interactions were found between carbohydrates and terpenes in either experiment.     

COMBINED INNOVATIVE HEAT PUMP DRYING TECHNOLOGIES AND NEW COLD EXTRUSION TECHNIQUES FOR PRODUCTION OF INSTANT FOODS

There is an increased demand for convenient foods including ready-to-eat and instant products. These products are desired with minimum concentration of synthetic chemicals. This creates challenges for the food industry and dryers manufactures to develop new technologies to process difficult-sensitive materials and to supply final products with high quality and improved properties. Fruits and vegetables are mainly composed of water, carbohydrates, proteins and lipids. Due to modification of chemical and physical bonds the compounds the material becomes viscous and sticky during processing. Conventional dryers have limitations in handling such sensitive materials. Heat pump dryers have been applied in the production of a diversity of ready-to-eat foods and dried instant products for the last five years at SINTEF-NTNU. Besides being energetically efficient and environmentally friendly, the heat pump drying technology provides a wide range of drying conditions as required to produce powders with improved characteristics. This work describes the new technologies and processing line for the production of instant foods as well as the measurements on the properties and quality attributes for raw, intermediate and final instant products.     

Environment and colour: The technological interface

Technology and colour are viewed as interfaces between the environment, humans and human activity. Examples are provided of ways of facilitating and improving access to and use of colours by commercial users of colour coatings through improvements in the accuracy of measuring and displaying colour. By analogy, the task of providing effective interfaces within the coatings industry, between the coatings industry and the environment and between the coatings industry and the public and political domain are discussed. Examples of information shortfalls are cited to illustrate how distortions arise. Examples of more effective, integrated technological, organisational and political interfacing are culled from the author's experiences.     

毒死蜱、联苯菊酯在室内和室外土壤中的消解动态及土壤化学屏障研究

[目的]探讨毒死蜱和联苯菊酯在室内外土壤中的消解动态,并预测2种农药作为土壤化学屏障防治白蚁的有效期。[方法]采用气相色谱法测定不同时期土壤中毒死蜱和联苯菊酯的残留量并采用土壤穿透法测定2种农药在土壤中的生物活性。[结果]毒死蜱在室内和室外的半衰期分别为51.3、39.5 d,联苯菊酯在室内和室外的半衰期分别为31.3、44.5 d。毒死蜱和联苯菊酯抗白蚁穿透的最低有效质量分数分别为6.15、5.78 mg/kg,并结合消解动态方程预测出毒死蜱和联苯菊酯作为土壤化学屏障中有效成分的有效期在室内分别为195、29.1 d,在室外则分别为158.4、56.1 d。[结论]得到的白蚁防治有效期结果较好,为白蚁的化学防治提供理论依据。     

工业纯锆产品的性能和应用

1前言锆(Zirconium)的元素符号为Zr,位于元素周期表中第IV-B族元素,银白色金属。它具有熔点高、密度适中、良好的强度和塑性匹配,而且热中子吸收