Crystallization kinetics and enhanced Bi NIR luminescence of transparent silicate glass‐ceramics containing Sr2YbF7 nanocrystals

Bismuth‐doped glasses and crystals have been widely investigated due to their intriguing potential applications in superbroadband fiber amplifier and lasers in new NIR spectral range. However, few reports have been devoted so far to bismuth‐doped transparent glass‐ceramics. Here, this work reports on bismuth‐doped silicate glasses and glass‐ceramics, which were prepared by melt‐quenching and consequent annealing processes, respectively. On the basis of the analyses on crystallization kinetics, nucleation and growth rate of crystalline phase can be modulated and Sr₂YbF₇ nanophase can, therefore, be precipitated uniformly inside the glass matrix in a controlled way to maintain proper transparence especially in optical telecommunication windows. Once the nanophase comes into being, enhanced bismuth NIR luminescence can be observed by more than 40 times upon excitation of 470 nm. Similar enhancement can appear upon different excitation schemes and the mechanism is discussed accordingly. Such Bi doped transparent glass‐ceramics with improved luminescence efficiency might find application in fiber lasers for future optical fiber communication.     

Predictable tendency of Bi NIR emission in Bi‐doped magnesium aluminosilicate laser glasses

Because of superbroad luminescence in the range of near infrared (NIR), Bi‐doped glasses and fibers have received more attentions recently for the applications in super broadband optical fiber amplifiers or new wavelength lasers. As the luminescence comes from the transitions between naked 6p orbitals of bismuth, it is very susceptible to slight changes of local field around Bi. Therefore, it is always very challenging to predict NIR emission of bismuth in advance. Here, we found bismuth NIR emission shows predictable tendency in ternary glass system of MgO–Al₂O₃–SiO₂. The emission peak shifts red along the content of magnesium upon the excitation of 484 nm, which follows a single exponential growth equation. In the meantime, the full width at half maximum (FWHM) is broadened while the lifetime keeps decreasing. Glass structure analysis on basis of FTIR, ²⁷Al NMR, ²⁹Si NMR spectra reveals that these changes correlate to integrity of glass network, the increased disorder of local field around bismuth and the enhanced interaction between bismuth and host, which are perhaps due to the linear increase of nonbridging oxygen, and the enhanced Si–O asymmetric stretching vibrations along with magnesium, respectively. Electron probe microanalysis shows good homogeneity of Si, Al, Mg, Bi, and O distribution within the samples, and yoyo experiments of heating and cooling between 30°C and 300°C reveal the good resistance of such doped glasses to thermal degradation. This makes the glasses promising in applications of fiber devices even under extreme condition such as at higher temperature. The finding in this work should be helpful for the design of Bi‐doped laser glasses in future.     

The origin of the heterogeneous distribution of bismuth in aluminosilicate laser glasses

As one kind of novel and burgeoning laser materials, bismuth‐doped silicate glasses have aroused increasing attention for the super broadband near‐infrared (NIR) emission. However, the large optical scattering loss, resulting from optical heterogeneity in glass color and refractive index, limits their further applications in telecommunication system. Thus, it is urgent to uncover the essence of heterogeneity in Bi‐doped silicate glasses and subsequently improve glass optical performance. It will give us some hint to homogenize the glass component and Bi active centers so as to boost the development of Bi‐based glass materials. Here, taking 1 typical Bi‐doped calcium aluminosilicate glass as an example, we revealed the origin of the optical heterogeneities in glass color and refractive index through the NIR emission spectra, electron probe microanalyzer (EPMA) of elements and X‐ray photoelectron spectroscopy (XPS) of Bi 4f_5/2, Bi 4f_7/2, and Al 2p. The inhomogeneous distribution of Bi and aluminum components is responsible for the heterogeneity in this glass system. In addition, we found that tetrahedral coordinated aluminum favors the existence of Bi NIR centers, consequently resulting in enhanced Bi NIR emissions. Furthermore, based on our results and the role of Al³⁺ in glass network, we demonstrate the homogenizing of glass component by finely tuning glass composition. This work will enrich the understanding of Bi‐doped laser glass and provide a guideline for the design of component‐derived Bi‐doped silicate glasses and fibers with efficient NIR emission and high optical quality.     

Tunable luminescence from bismuth‐doped phosphate laser glass by engineering photonic glass structure

Because of ultra‐broadband near‐infrared (NIR) emission bismuth‐activated glasses and fibers offer a new promising platform for novel photonic devices such as new type of optical amplifiers and broadly tunable fiber lasers. Yet, challenge remains to manipulate the NIR emission behavior of bismuth (Bi) in photonic glasses for efficient Bismuth‐doped fiber and fiber lasers. Here, by engineering phosphorus and aluminum's topology, broadly tunable NIR emission has been realized in Bismuth‐doped phosphate laser glass. Structural and optical analyses on ²⁷Al magic‐angle spinning nuclear magnetic resonance (MAS NMR), ³¹P MAS NMR, fourier transform infrared (FTIR) and static emission spectra suggest that polymerization of glass network can be improved by proper addition of aluminum into the system, which can be evidenced by partial conversion of Q² to Q³ species of phosphorus and the shift of P–O–P asymmetric stretching vibration toward lower frequency, and this turns out beneficial to Bi NIR emission. Embedding aluminum tetrahedra into phosphorus glass network can reduce the local crystal field around bismuth and therefore lead to the blueshift of Bi emission. This work presents new insights into the luminescent behavior of Bi ions in phosphate glass and it helps the design and fabrication of Bismuth‐doped glasses and fibers in future.     

Quantitative prediction of the structure and luminescence properties of Nd3+ doped borate laser glasses

Although great advance has been made in glass science, predicting luminescence properties of laser glass poses a significant challenge for scientists due to the complex relationship between the composition, structure, and properties of the rare earth ions doped laser glasses. The development of high-performance laser glass usually relies on intuition and trial-and-error. Recently, with the proposal of the materials genome engineering, the “glass genome” has also attracted much attention. Here, the structure of the Nd³⁺ doped B₂O₃-Li₂O laser glasses was analyzed using Fourier transform infrared spectra and nuclear magnetic resonance, revealing that the glass contains similar glass-forming ion-centered coordination polyhedron structure groups to the neighbor congruent glassy compounds. The structure and properties of glass largely depend on the neighbor congruent glassy compounds. Therefore, the structure and luminescence properties of Nd³⁺ doped B₂O₃-Li₂O and B₂O₃-MgO-Li₂O laser glasses can be quantitatively predicted via the neighbor congruent glassy compounds. The predictive values are in good agreement with the experimental data, which indicates that our approach is an effective way to predict the structure and luminescence properties of Nd³⁺ doped borate laser glasses.     

Effect of BaF2 Content on Luminescence of Rare‐Earth Ions in Borate and Germanate Glasses

Rare‐earth‐doped oxyfluoride germanate and borate glasses were synthesized and next studied using spectroscopic methods. Influence of fluoride modifier on luminescence properties of rare earths in different glass hosts was examined. The excitation and emission spectra of Pr³⁺ and Er³⁺ ions in the studied glasses were registered. The emission spectra of Pr³⁺ ions in germanate and borate glasses are quite different and depend strongly on the glass host. In samples doped with Er³⁺ ions emission bands located around 1530 nm corresponding to the main ⁴I_13/2→⁴I_15/2 laser transition were registered, independently of the glass host. Quite long‐lived near‐infrared luminescence of Er³⁺ ions was observed for germanate glasses with low BaF₂ content, while in borate glass systems influence of barium fluoride on luminescence lifetimes is not so evident. The Judd–Ofelt calculations were used in order to determine quantum efficiencies of excited states of rare‐earth ions in germanate and borate glasses.     

New strategy to enhance the broadband near‐infrared emission of bismuth‐doped laser glasses

Bismuth‐doped glasses and fibers with broadband near‐infrared (NIR) emission have garnered much attention on account of their potential applications in new fiber lasers and broadband amplifiers. Yet the realization of high gain from Bi‐doped fibers and highly efficient NIR emission from Bi‐doped glasses are still a stubborn puzzle. The enhancement of Bi NIR emission is normally based on modifying the glass composition and topology, which will change the structure of the glass over a wide range and alter the thermal or mechanical properties of the glass simultaneously, making it more complicated for the designing and fabricating of Bi fibers with good performance. Here, we find that a trace addition of Si₃N₄ can efficiently enhance the Bi NIR emission without changing the glass structure significantly, right followed by spectral and structural analysis. ²⁷Al NMR measurement reveals that the short‐ to medium‐range order of this glass is unchanged. The EPMA measurement confirms the homogeneity of fabricated glass. The great enhancement and red‐shift under blue light excitation may originate from the conversion of Bi active centers to low valence. Our results indicate that the trace addition of nitride could be a facile and maneuverable way to control the valence of active ions in glasses, which may contribute to improving the performance of photonic glasses.     

Eu‐, Tb‐, and Dy‐Doped Oxyfluoride Silicate Glasses for LED Applications

Luminescence glass is a potential candidate for the light‐emitting diodes (LEDs) applications. Here, we study the structural and optical properties of the Eu‐, Tb‐, and Dy‐doped oxyfluoride silicate glasses for LEDs by means of X‐ray diffraction, photoluminescence spectra, Commission Internationale de L'Eclairage (CIE) chromaticity coordinates, and correlated color temperatures (CCTs). The results show that the white light emission can be achieved in Eu/Tb/Dy codoped oxyfluoride silicate glasses under excitation by near‐ultraviolet light due to the simultaneous generation of blue, green, yellow, and red‐light wavelengths from Tb, Dy, and Eu ions. The optical performances can be tuned by varying the glass composition and excitation wavelength. Furthermore, we observed a remarkable emission spectral change for the Tb³⁺ single‐doped oxyfluoride silicate glasses. The ⁵D₃ emission of Tb³⁺ can be suppressed by introducing B₂O₃ into the glass. The conversion of Eu³⁺ to Eu²⁺ takes place in Eu single‐doped oxyfluoride aluminosilicate glasses. The creation of CaF₂ crystals enhances the conversion efficiency. In addition, energy transfers from Dy³⁺ to Tb³⁺ and Tb³⁺ to Eu³⁺ ions occurred in Eu/Tb/Dy codoped glasses, which can be confirmed by analyzing fluorescence spectra and energy level diagrams.     

Photoluminescence of Ag Nanoparticles and Tm3+ Ions in the Bismuth Germanate Glasses for the Blue Light‐Excited W‐LED

Materials containing rare‐earth ions and Ag nanoparticles (NPs) have been widely applied due to prior demonstration of increase in their luminescence properties. Here, Tm³⁺ ions‐doped bismuth germanate glasses were synthesized by a chemical reduction method based on the conventional melting‐quenching technique. The Ag NPs were facilely precipitated in the glass matrix by the chemical reduction method during the annealing process. TEM image shows that the Ag NPs are closely dispersed in the glass matrix. The luminescence properties and energy‐transfer mechanism were systematically investigated by means of absorption, emission, and excitation spectra. Significant enhancements of Tm³⁺ ions emission and a broad emission band centered at 568 nm caused by Ag NPs are observed upon 474‐nm excitation. Our research may illustrate the interactions between Tm³⁺ ions and Ag NPs and provide a simplified way to synthesize the high‐efficiency luminescent materials for the blue light‐excited W‐LEDs.     

Near white light emission of Ce3+‐, Ho3+‐, and Sm3+‐doped oxyfluoride silicate glasses

The Ce³⁺‐, Ho³⁺‐, and Sm³⁺‐ single and co‐doped oxyfluoride silicate glasses for light emitting diodes are studied. These glasses were prepared by melt quenching method and their optical and structural properties were investigated by absorption spectra, photoluminescence spectra, Commission International de I'Eclairage chromaticity coordinates, X‐ray diffraction, and Fourier transform infrared spectra. It is found that the introduction of Al₂O₃ in glass composition can improve the emissions of Ho³⁺ and Sm³⁺. While the presence of B₂O₃ has the adverse effect and can suppress the emissions of Ho³⁺ and Sm³⁺. With substituting Na₂O for CaO in the glass compositions, CaF₂ crystals can be formed during the melt quenching process. We find the formation of CaF₂ crystals can change the emission behavior of Ho³⁺ and Sm³⁺ ions. White light emissions can be achieved in the glasses and the luminescence colors can be tuned by varying the concentrations of the doped rare‐earth ions and the composition of glass matrix. The Ce³⁺‐, Ho³⁺‐, and Sm³⁺‐doped oxyfluoride silicate glasses presented here demonstrate promising applications in the fields of light emitting diodes.     

Mechanism for broadening and enhancing Nd3+ emission in zinc aluminophosphate laser glass by addition of Bi2O3

Nd³⁺-doped phosphate laser glasses have been attracting much attention and widespread investigation due to their high solubility of rare earth (RE) ions, excellent spectroscopic properties, and large damage threshold. However, the narrow NIR emission bandwidth (less than 30 nm) of these Nd³⁺-doped phosphate glasses limits their further application toward ultrahigh power field and efficient fiber laser in new region. Here, we demonstrate the broadening and enhancing of Nd³⁺ NIR emission in laser glass of zinc aluminophosphate through tuning the glass structure and covalency of Nd-O bond without limiting the radiative properties of Nd³⁺. The maximum bandwidth of 1.05 μm emission is broadened to 50 nm, which is comparable to that of Nd³⁺-doped aluminate laser glasses. Simultaneously, the lifetime of ⁴F_3/2 level is elongated nearly by two times. Structural and optical properties of prepared glasses were discussed systematically to reveal the mechanism. Detailed analysis on optical spectra and glass structure indicates that the bandwidth is affected by not only the covalency of Nd-O but also the compactness of glass structure. Our results could enrich our understanding about the relationship between local glass structure and luminescence behaviors of active centers, and may be helpful in designing new RE-doped laser glass systems.     

Improving luminescence behavior and glass stability of tellurium-doped germanate glasses by modifying network topology

Broadband near-infrared (NIR) luminescent materials are of great interest for their potential application in optical communication, remote sensing, imaging, and homeland security. Tellurium (Te) doped glasses were recently recognized as such a promising candidate due to their broadband NIR emission (700–1700 nm). However, the achievement of Te-doped glasses with high luminescence efficiency and glass stability (GS) remains a daunting challenge. Here, the luminescence behavior and GS of Te-doped germanate glasses are manipulated by tailoring the glass network topology. Te NIR luminescence is enhanced by tailoring topological cages in germanate glass network structure through varying glass network modifiers. Meanwhile, the GS of potassium germanate glass is significantly enhanced due to increased network connectivity caused by the co-introduction of alkaline earth oxides. Finally, NIR luminescence intensity of the glass was further enhanced by optimizing the doping concentration of TeO₂. The findings here could contribute to designing Te-activated glasses with improved performance for application in optical amplifiers and tunable fiber lasers.     

Optical Property of Dy3+‐and Ce3+‐Doped Si–B–Na–Sr Glasses

Novel Dy³⁺ and Ce³⁺ doped Si–B–Na–Sr (SBNS) glasses were synthesized by melt‐quenching technique. Excited by 327 nm, the 0.5Dy³⁺‐and 0.5Ce³⁺‐doped SBNS exhibits white emission with Commission Internationale de L'Eclairage coordinates of (0.308, 0.280). Basic optical characterizations have been performed by measuring the absorption and emission spectra and calculating Judd–Ofelt intensity parameters, radiative probability, luminescence branching ratio, cross sections, and effective bandwidth. The Judd–Ofelt parameters Ω₂, Ω₄, and Ω₆ indicate a high asymmetrical environment and covalent environment in the optical glass. The emission color of Ce³⁺ and Dy³⁺ codoped transparent glass can be tuned from blue to white through energy transfer from Ce³⁺ to Dy³⁺ ions. The resulting glass may have potential application in white‐light‐emitting source.     

Experimental and theoretical studies on NIR luminescence of titanate-germanate glasses doped with Pr3+ and Tm3+ ions

Near-infrared (NIR) luminescence of Pr³⁺ and Tm³⁺ ions in titanate-germanate glasses has been studied for laser and fiber amplifier applications. The effect of the molar ratio GeO₂:TiO₂ (from 5:1 to 1:5) on spectroscopic properties of glass systems was studied by absorption, luminescence measurements, and theoretical calculations using the Judd–Ofelt theory. It was found that independent of the TiO₂ concentration, intense NIR emissions at 1.5 and 1.8 μm were observed for glasses doped with Pr³⁺ and Tm³⁺ ions, respectively. Moreover, several spectroscopic and NIR laser parameters for Pr³⁺ and Tm³⁺ ions, such as emission bandwidth, stimulated emission cross-section, quantum efficiency, gain bandwidth, and figure of merit, were determined. The results were discussed in detail and compared to the different laser glasses. Systematic investigations indicate that Pr³⁺-doped system with GeO₂:TiO₂ = 2:1 and Tm³⁺-doped glass with GeO₂:TiO₂ = 1:2 present profit laser parameters and could be successfully applied to NIR lasers and broadband optical amplifiers.     

Improving the NIR light‐harvesting of perovskite solar cell with upconversion fluorotellurite glass

Upconversion glasses are capable of converting the sub‐bandgap NIR light into photons of a particular wavelength which can be efficiently utilized by solar cells. Herein, the Yb³⁺/Er³⁺ co‐doped fluorotellurite upconversion glasses were prepared. The most intense upconversion luminescence (UCL) under 980‐nm LD excitation was obtained in the glass with Yb³⁺‐to‐Er³⁺ molar ratio of 10:1. The dependences of UCL on the pump power and temperature were investigated. The UCL can be mainly attributed to the two‐photon involved energy transfer processes and is very stable to the change in temperature even when heated up to 200°C. The subsequent implementation of the glass as upconverter for a MAPbI_3‐xCl_x‐based perovskite solar cell (PSC) resulted in an open circuit voltage of 0.83 V and a short circuit current density of 0.32 mA/cm². This application of upconversion glass for enhancing the NIR light harvesting offers a promising way to improve the photo‐electric conversion efficiencies of PSCs.     

The mutual influence between rare earth element doping and femtosecond laser-induced effects in Ga-As-Sb-S chalcogenide glass

Femtosecond laser-induced damage thresholds (LIDTs) of Ga_0.8As_29.2Sb₁₀S₆₀ glasses doped with gradient Tm³⁺ concentrations and the effects of laser-induced damage on the glass' luminescence properties were studied in this work. Tm³⁺ doping in the glass considerably decreased the LIDT, from 3394.8 to 1881.8 mJ/cm², when the Tm³⁺ concentration increased from 0 to 5000 ppmw. This was related to the absorption of Tm³⁺ around the femtosecond laser's wavelength and microstructural changes caused by the Tm³⁺ doping. On the other hand, the femtosecond laser changed the glass matrix's elemental distribution and microstructure. Although the laser damaged the glass, the luminescence properties were barely affected. Based on the changes, femtosecond laser damage mechanism of chalcogenide glass doped with rare earth element was firstly proposed.     

Molecular‐Like Ag Clusters and Eu3+ Co‐Sensitized Efficient Broadband Spectral Modification with Enhanced Yb3+ Emission

AgNO₃/EuF₃/YbF₃ tri‐doped oxyfluoride glass was prepared by a melt‐quenching method, in which a high‐efficient broadband spectral modification can be realized due to the simultaneous energy‐transfer processes of Eu³⁺→Yb³⁺, molecular‐like Ag (ML‐Ag) clusters→Yb³⁺, and ML‐Ag clusters→Eu³⁺→Yb³⁺. The spectral measurements indicated that besides the F‐center brought by the fluorides, the formation of the ML‐Ag clusters and the evolution of silver species within the glass matrix were also closely related to the introduction of Eu³⁺ and Yb³⁺ ions and which in return greatly affected the luminescence properties of these rare‐earth ions. As the UV‐visible irradiation in the wavelength region of 250–600 nm can be efficiently converted into near‐infrared emission around 1000 nm in the AgNO₃/EuF₃/YbF₃ tri‐doped glass, which thus has promising application in enhancing the photovoltaic conversion efficiency of the silicon solar cell.     

Highly efficient photostimulated luminescence of Pb2+ doped SrAl2O4:Eu2+, Dy3+ borate glass for long-term stable optical information storage

Despite the transformative role in society, information storage materials remain vulnerable to the corrosion by water, oxygen and heat, while topological engineering of glass provides an attractive solution to this tricky problem. Here, a considerable discovery is reported that the doping of Pb²⁺ ions could greatly affect the luminescence behavior of SrAl₂O₄:Eu²⁺, Dy³⁺ borate glass, resulting in a controllable property between long persistent luminescence and photostimulated luminescence. Specifically, high concentration Pb doped samples featuring the deeper continuously distributed trap levels with 0.97–1.47 eV performed highly efficient photostimulated luminescence. In other words, the ultraviolet-visible photons could be “written” in the deeper traps and then “read out” under the stimulation of a 980 nm near-infrared laser. From the combined structural and luminescence characterizations, it was speculated that the deeper trap originated from the increase of oxygen vacancies at defect levels. The practical anti-counterfeiting application was successfully realized based on this material with superior photostimulated luminescence phenomenon, which rendered the SrAl₂O₄:Eu²⁺, Dy³⁺ borate glass shine in a new field such as anti-counterfeiting, yet as a promising candidate for information storage application.     

稀土离子掺杂的多组分玻璃光纤

稀土离子掺杂的多组分玻璃光纤在宽带光纤放大器与上转换光纤激光器中具有重要的应用。本文介绍了稀土离子掺杂多组分玻璃光纤宽带光纤放大器与上转换光纤激光器的工作机理,综述了其最新相关研究进展,并对目前研究中需进一步解决的问题及未来的发展提出了建议与展望。从当前的研究现状来看,碲酸盐玻璃和铋基玻璃应是今后宽带玻璃光纤放大器光纤基质材料的研究重点。对上转换光纤激光器基质材料而言,如何获得更好的具有低声子能量和优良物化性能的玻璃基质,还需进一步探索。     

Tuning the Interfacial Reaction Between Bismuth‐Containing Sealing Glasses and Cr‐Containing Interconnect: Effect of ZnO

The interfacial reaction between sealing glasses and Cr‐containing interconnect presents a challenge for the development of solid oxide fuel cell (SOFC). In this work, we report that the interfacial reaction between bismuth‐containing sealing glasses and Cr‐containing interconnect can be tailored by ZnO dopant. The addition of ZnO contributes to a more open glass structure, resulting in the facilitated diffusion of ions in glass and thus the increase in the interfacial reaction. On the other hand, the further increase in ZnO content enhances the Bi³⁺→Bi⁵⁺ transition in glasses and reduces the redox interfacial reaction by consuming the oxygen available at the glass/metal interface. In addition, good joining can be observed at the sealing interface between ZnO‐containing glass‐ceramics and Crofer 22 APU, held in air at 700°C for 1400 h. Moreover, the glass‐ceramics show considerable electrical stability in oxidizing and reducing atmospheres. The reported results support the suitability of prepared glass‐ceramics as sealing materials for SOFC applications.