Dual layer SiC coating on matrix graphite sphere prepared by pack cementation and fluidized‐bed chemical vapor deposition

A dual layer silicon carbide (SiC) coating including inner porous SiC (p‐SiC) layer and outer dense SiC (d‐SiC) layer was fabricated on the matrix graphite (MG) spheres of high‐temperature gas‐cooled reactor fuel elements by pack cementation and fluidized‐bed chemical vapor deposition process to improve the oxidation‐resistant property. Microstructure of the coating demonstrates different density and structure of the two SiC layers with no obvious boundaries between them. Weight gain curves of oxidation tests at 1773 K for 200 hours show that the coating could effectively protected the MG sphere by isolating the air infiltration with p‐SiC layer as the main functional layer and d‐SiC layer as the transition layer to improve the bond strength. Due to the transition function of p‐SiC layer, the coated spheres could understand more than 50 times thermal shocking tests from 1773 K to room temperature with no stress cracking.     

A gradient composite coating to protect SiC-coated C/C composites against oxidation at mid and high temperature for long-life service

To improve the oxidation resistance of carbon/carbon (C/C) composites at mid and high temperature, a gradient composite coating was designed and prepared on SiC-coated C/C composites by in situ formed-SiO₂ densifying the porous SiC-ZrSi₂ pre-coating. SiO₂ gradient distribution was conducive to inhibiting the cracking of the coating. A dual-layer structure with the outer dense layer and the inner microporous layer was formed in the coating during densifying. The dense layer had excellent oxygen diffusion resistance and the microporous layer alleviated CTE mismatch between SiC inner coating and dense layer. Moreover, ZrSiO₄ particles inhibited crack propagation and stabilized SiO₂ glass. Therefore, the coating can protect the C/C composites from oxidation at 1473 K, 1573 K and 1773 K for 810 h, 815 h and 901 h, respectively. The coated samples underwent 30 thermal cycles between room temperature and 1773 K without mass loss, exhibiting good thermal shock resistance.     

Research on microstructure and oxidation resistant property of ZrSi2-SiC/SiC coating on HTR graphite spheres

ZrSi₂-SiC/SiC coating was prepared on the surface of high temperature gas-cooled reactor (HTR) matrix graphite spheres by two-step pack cementation and sintering process. The microstructure, oxidation resistance and thermal shock resistance properties of the as-prepared coatings with different original powder mixtures were investigated. Results show that dense microstructure of the ZrSi₂-SiC/SiC coating and continuous ZrSiO₄-SiO₂-ZrO₂ glass phase generated during the oxidation process were the key factors for the outstanding thermal properties. When the mole ratio of Zr:Si:C reaches 1:7:3 in the second pack cementation powders, the coated graphite spheres have optimum oxidation resistant ability. The weight gain is only 0.6 wt% after 15 times thermal shock tests and 0.12 wt% after isothermal oxidation test at 1500 °C for 20 h in air. The oxidation resistant mechanism of the coating was also discussed. The dense inner SiC layer and the outer glass layer generated during the oxidation process could protect the ZrSi₂-SiC/SiC coating from further oxidation.     

Improved antioxidative and mechanical properties of SiC coated C/C composites via a SiO2-SiC reticulated layer

To improve the oxidation resistances of SiC coated C/C composites by a pack cementation (PC) method at high temperature and alleviate the siliconization erosion of molten silicon on C/C substrate during the preparation of SiC coating, a SiO₂-SiC reticulated layer with SiC nanowires was pre-prepared on C/C composites through combined slurry painting and thermal treatment before the fabrication of SiC coating. The presence of porous SiO₂-SiC layer with SiC nanowires was beneficial to fabricate a compact and homogeneous SiC coating resulting from synergistic effect of further reaction between SiO₂ and pack powders and the reinforcement of SiC nanowires. Therefore, the results of thermal shock and isothermal oxidation tests showed that the mass loss of modified SiC coating was only 0.02 % after suffering 50-time thermal cycles between room temperature and 1773 K and decreased from 5.95 % to 1.08 % after static oxidation for 49.5 h in air at 1773 K. Moreover, due to the blocking effect of SiO₂-SiC reticulated layer on siliconization erosion during PC, the flexural strength of SiC coated C/C composites with SiO₂-SiC reticulated layer increased by 64.8 % compared with the untreated specimen.     

A ZrB2–SiC/SiC oxidation protective dual-layer coating for carbon/carbon composites

In order to improve the oxidation resistance of C/C composites, a ZrB₂–SiC/SiC oxidation protective dual-layer coating was prepared by a pack cementation combined with the slurry paste method. The phase and microstructure of the coating were characterised by X-ray diffraction, scanning electron microscope and energy-dispersive spectrometer analyses. The anti-oxidation and thermal shock resistance of the coating were also investigated. It was found that the ZrB₂–SiC/SiC coating could effectively improve the oxidation resistance of the C/C composites. The weight loss of the coated samples was only 1.8% after oxidation at 1773?K for 18?h in air. The coating endured 20 thermal shock cycles between 1773?K and room temperature with only 4.6% weight loss.     

Oxidation resistance of SiC nanowires reinforced SiC coating prepared by a CVD process on SiC‐coated C/C composites

Oxidation protective SiC nanowires‐reinforced SiC (SiCNWs‐SiC) coating was prepared on pack cementation (PC) SiC‐coated carbon/carbon (C/C) composites by a simple chemical vapor deposition (CVD) process. This double‐layer SiCNWs‐SiC/PC SiC‐coating system on C/C composites not only has the advantages of SiC buffer layer but also has the toughening effects of SiCNWs. The microstructure and phase composition of the nanowires and the coatings were examined by SEM, TEM, and XRD. The single‐crystalline β‐SiC nanowires with twins and stacking faults were deposited uniformly and oriented randomly with diameter of 50‐200 nm and length ranging from several to tens micrometers. The dense SiCNWs‐SiC coating with some closed pores was obtained by SiC nanocrystals stacked tightly with each other on the surface of SiCNWs. After introducing SiCNWs in the coating system, the oxidation resistance is effectively improved. The oxidation test results showed that the weight loss of the SiCNWs‐SiC/PC SiC‐coated samples was 4.91% and 1.61% after oxidation at 1073 K for 8 hours and at 1473 K for 276 hours, respectively. No matter oxidation at which temperature, the SiCNWs‐SiC/PC SiC‐coating system has better anti‐oxidation property than the single‐layer PC SiC coating or the double‐layer CVD SiC/PC SiC coating without SiCNWs.     

Self‐Generating High‐Temperature Oxidation‐Resistant Glass‐Ceramic Coatings for C–C Composites Using UHTCs

Carbon–carbon (C–C) composites are ideal for use as aerospace vehicle structural materials; however, they lack high‐temperature oxidation resistance requiring environmental barrier coatings for application. Ultra high‐temperature ceramics (UHTCs) form oxides that inhibit oxygen diffusion at high temperature are candidate thermal protection system materials at temperatures >1600°C. Oxidation protection for C–C composites can be achieved by duplicating the self‐generating oxide chemistry of bulk UHTCs formed by a “composite effect” upon oxidation of ZrB₂–SiC composite fillers. Dynamic Nonequilibrium Thermogravimetric Analysis (DNE‐TGA) is used to evaluate oxidation in situ mass changes, isothermally at 1600°C. Pure SiC‐based fillers are ineffective at protecting C–C from oxidation, whereas ZrB₂–SiC filled C–C composites retain up to 90% initial mass. B₂O₃ in SiO₂ scale reduces initial viscosity of self‐generating coating, allowing oxide layer to spread across C–C surface, forming a protective oxide layer. Formation of a ZrO₂–SiO₂ glass‐ceramic coating on C–C composite is believed to be responsible for enhanced oxidation protection. The glass‐ceramic coating compares to bulk monolithic ZrB₂–SiC ceramic oxide scale formed during DNE‐TGA where a comparable glass‐ceramic chemistry and surface layer forms, limiting oxygen diffusion.     

Ultra‐High‐Temperature Ceramic HfB2‐SiC Coating for Oxidation Protection of SiC‐Coated Carbon/Carbon Composites

To protect the carbon/carbon (C/C) composites from oxidation, an outer ultra‐high‐temperature ceramics (UHTCs) HfB₂‐SiC coating was prepared on SiC‐coated C/C composites by in situ reaction method. The outer HfB₂‐SiC coating consists of HfB₂ and SiC, which are synchronously obtained. During the heat treatment process, the formed fluid silicon melt is responsible for the preparation of the outer HfB₂‐SiC coating. The HfB₂‐SiC/SiC coating could protect the C/C from oxidation for 265 h with only 0.41 × 10^?2 g/cm² weight loss at 1773 K in air. During the oxidation process, SiO₂ glass and HfO₂ are generated. SiO₂ glass has a self‐sealing ability, which can cover the defects in the coating, thus blocking the penetration of oxygen and providing an effective protection for the C/C substrate. In addition, SiO₂ glass can react with the formed HfO₂, thus forming the HfSiO₄ phase. Owing to the “pinning effect” of HfSiO₄ phase, crack deflecting and crack termination are occurred, which will prevent the spread of cracks and effectively improve the oxidation resistance of the coating.     

Microstructure and anti-oxidation properties of multi-composition ceramic coatings for carbon/carbon composites

To protect carbon/carbon (C/C) composites from oxidation at elevated temperature, an effective WSi₂-CrSi₂-Si ceramic coating was deposited on the surface of SiC coated C/C composites by a simple and low-cost slurry method. The microstructures of the double-layer coatings were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analyses. The coating exhibited excellent oxidation resistance and thermal shock resistance. It could protect C/C composites from oxidation in air at 1773 K for 300 h with only 0.1 wt.% mass gain and endure the thermal shock for 30 cycles between 1773 K and room temperature. The excellent anti-oxidation ability of the double-layer WSi₂-CrSi₂-Si/SiC coating is mainly attributed to the dense structure of the coating and the formation of stable vitreous composition including SiO₂ and Cr₂O₃ produced during oxidation.     

The improvement in oxidation resistance of carbon by a graded SiC/SiO2 coating

A dense functionally gradient SiC/SiO₂ coating has been developed to improve the oxidation resistance of carbon at elevated temperatures. SiC was coated on the surface of a graphite substrate by a reaction between thermally evaporated silicon and carbon at 1400 °C. The SiO₂ layer was deposited by exposing the SiC coated specimens next to a bed of Si powder in a flowing H₂–H₂O gas (P_H2O=2.6×10⁻² atm) at 1400 °C. The formed SiC/SiO₂ layers were dense and had gradient compositions with good adhesion to the carbon substrate. However, as the coating thickness increased, the coating layer became cracked and delaminated from the substrate due to thermal stress. The specimens with the continuous SiC/SiO₂ layer showed a remarkably improved oxidation resistance up to 1200 °C.     

HfC nanowires to improve the toughness and oxidation resistance of Si-Mo-Cr/SiC coating for C/C composites

To improve the oxidation resistance of carbon/carbon (C/C) composites, a dense HfC nanowire-toughened Si-Mo-Cr/SiC multilayer coating was prepared by chemical vapor deposition (CVD) and pack cementation. The microstructure, thermal shock and isothermal oxidation resistance of the coating were investigated. HfC nanowires could improve the toughness of the coating and suppress the coating cracking. After incorporating HfC nanowires in the coating, both of the thermal shock and isothermal oxidation resistance of the coating were obviously improved. The multilayer coating with HfC nanowires could effectively protect C/C composites at 1773 K for 270 h, whose weight loss is only 0.19%. The good oxidation resistance is mainly attributed to the formation of a compound glass layer containing SiO₂ and Cr₂O₃.     

In-situ synthesis of SiC nanofibers for improving the oxidation resistance of graphite

In order to improve the oxidation resistance of graphite, a SiC/ZrO₂-SiC nanofibers multiphase coating was developed on a graphite substrate using the pack cementation and slurry painting techniques. The microstructure of the coating was characterized by X-ray diffraction and scanning electron microscopy. The HSC chemistry software package was used for the thermodynamic calculations. The isothermal oxidation test of the coated samples was performed at 1773 K in air. A 500 µm thick gradient C–SiC transition layer was formed at the graphite-coating interface SiC nanofibers with the diameter in the range of 32–88 nm were observed on the coating whose growth was ascribed to the gas phase reaction of SiO with CO. The oxidation test results revealed that the SiC nanofibers and thermally stable phase ZrSiO₄ were the mainly effective tools protecting graphite from oxidation.     

Oxidation behaviour of SiC ceramic coating for C/C composites prepared by pressure-less reactive sintering in wet oxygen: Experiment and first-principle simulation

SiC ceramic coating, for prevention of C/C composites against oxidation, was prepared by pressure-less reactive sintering to investigate the oxidation behaviour in an oxidising environment containing water vapour at 1773 K. The experimental results demonstrated that the oxidation behaviour of porous SiC ceramics could be divided into two stages, following the parabolic model, which was attributed to the variation in the contact area involved in the oxidation reactions. During the entire oxidation process, water vapour could accelerate the oxidation of the SiC ceramics, according to the weight change. By first-principle calculations, the accelerated oxidation rate of the SiC ceramics was attributed to weakened Si–O and Al–O bonds in the formed glassy scale, which were caused by hydroxide radicals from the water. Atomic thermal motions at high temperature could lead to the breakage of the network structure, promoting the diffusion and solution of oxidising gases. When the as-prepared SiC ceramics were applied as anti-oxidative coatings for the C/C composites, the SiC ceramic coating and C/C matrix could be sealed and protected faster per unit time, because water vapour was beneficial to the formation of a glassy layer. The weight loss of the C/C matrix could be attributed to unsealed microcracks inside the SiC coating in the initial stage.     

SiC nanowire-toughened MoSi2-WSi2-SiC-Si multiphase coating for improved oxidation resistance of C/C composites

To improve the oxidation resistance of carbon/carbon (C/C) composites at high temperature, a SiC nanowire-toughened MoSi₂-WSi₂-SiC-Si multiphase coating was prepared by chemical vapor deposition (CVD) and pack cementation. The microstructure, mechanical properties and oxidation resistance of the coating were investigated. After the introduction of SiC nanowires, the elastic modulus, hardness, and fracture toughness of the MoSi₂-WSi₂-SiC-Si coating were increased by 25.48%, 4.09% and 45.03%, respectively. The weight loss of the coated sample with SiC nanowires was deceased from 4.83–2.08% after thermal shock between 1773 K and room temperature for 30 cycles and the weight loss is only 3.24% after isothermal oxidation at 1773 K in air for 82 h. The good oxidation resistance of the coating is mainly attributed to that SiC nanowires can effectively inhibit the propagation of cracks in the coating by the toughening mechanisms including bridging and pull-out.     

High temperature anti‐oxidation behavior of in situ and ex situ nanostructured C/SiC/ZrB2‐SiC gradient coatings: Thermodynamical evolution,microstructural characterization,and residual stress analysis

Nanostructured C/SiC/ZrB₂–SiC oxidation protective gradient coating was prepared by a two‐step reactive melt infiltration method. In order to reduce production cost, ZrB₂ phase was synthesized by the in situ reactive that included low‐cost ZrO₂ and B₂O₃ powders as raw materials. High‐temperature oxidation behavior of coatings was evaluated by isothermal oxidation test at 1773 K in air for 10 hours. Thermodynamical behavior of the coatings at various temperatures during oxidation test and coating process was predicted by HSC Chemistry 6.0 software. Compressive residual stresses of 36.9 MPa and 41 MPa were calculated for in situ and ex situ coatings by Williamson‐Hall method. After 10 hours of isothermal oxidation at 1773K, in situ and ex situ coatings showed 12.84% and 15.69% of weight losses with oxidation rates of 1.87 × 10^?2 g cm^?3 h^?1 and 0.91 × 10^?2 g cm^?3 h^?1, respectively. These results indicated that the oxidation protection ability of the coating produced by the in situ method was very close to ex situ coating.     

A SiC–Si–ZrB2 multiphase oxidation protective ceramic coating for SiC-coated carbon/carbon composites

In order to improve the oxidation protective ability of SiC-coated carbon/carbon (C/C) composites, a SiC–Si–ZrB₂ multiphase ceramic coating was prepared on the surface of SiC-coated C/C composite by the process of pack cementation. The microstructures of the coating were characterized using X-ray diffraction and scanning electron microscopy. The coating was found to be composed of SiC, Si and ZrB₂. The oxidation resistance of the coated specimens was investigated at 1773 K. The results show that the SiC–Si–ZrB₂ can protect C/C against oxidation at 1773 K for more than 386 h. The excellent oxidation protective performance is attributed to the integrity and stability of SiO₂ glass improved by the formation of ZrSiO₄ phase during oxidation. The coated specimens were given thermal shocks between 1773 K and room temperature for 20 times. After thermal shocks, the residual flexural strength of the coated C/C composites was decreased by 16.3%.     

SiC coating toughened by SiC nanowires to protect C/C composites against oxidation

A dense SiC coating toughened by SiC nanowires was prepared on carbon/carbon (C/C) composites using a two-step technique of chemical vapor deposition (CVD) to protect them against oxidation. The morphologies and crystalline structures of the coatings were characterized by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. SiC nanowires played a role in decreasing the size of the cracks and improving the thermal shock resistance of the coating. The result of thermal shock between 1773 K and room temperature for 21 times indicates that, compared with the SiC coating without SiC nanowires, the average size of the cracks in the SiC coating toughened with SiC nanowires reduced from 5 ± 0.5 to 3 ± 0.5 μm. The weight loss of the SiC coated C/C composites decreased from 9.32 to 4.45% by the introduction of SiC nanowires.     

Oxidation and erosion resistance of multi-layer SiC nanowires reinforced SiC coating prepared by CVD on C/C composites in static and aerodynamic oxidation environments

A multi-layer SiC nanowires reinforced SiC (SiCnws-SiC) coating was prepared in-situ on carbon/carbon (C/C) composites by three chemical vapor deposition (CVD) processes. The microstructure and phase composition of the nanowires fabricated on the first-layer SiCnws-SiC coating and the coatings were examined by SEM, TEM, and XRD. The bamboo-like SiC nanowires with a 50?nm diameter and a length of several tens of micrometers are straight, randomly orientated and distributed like a net on the first-layer SiCnws-SiC coating. The growth direction is [111], and the growth mechanism is VS. The multi-layer SiCnws-SiC coating has three layers: the thickness of the first-layer is roughly 400?µm, and the outer two layers are about 200?µm. Each layer has a sandwich structure. The isothermal oxidation and erosion resistance of the multi-layer SiCnws-SiC coating were investigated in an electrical furnace and a high temperature wind tunnel. The results indicated that the weight loss of the multi-layer SiCnws-SiC coated C/C composites was only 1.8% after oxidation in static air at 1773?K for 361?h. Further, the coated sample failed due to fracture of the coating at the clamping position (i.e. 80?mm) after erosion at 1873?K for 130?h in the wind tunnel. The weight loss of the coated C/C composites occurred due to the formation of penetrating cracks in the coating during the oxidation thermal shock. The maximum bending moment and the larger clamping force caused the coating fracture and resulted in intense oxidation of the substrate and the failure of the specimen.     

Spark plasma sintering of oxides and carbide dispersed zirconia inert matrix fuels

Zirconia-based inert matrix fuels reinforced by ZrC were synthesized via spark plasma sintering (SPS). Composites with full density were obtained. In order to prevent the oxidation introduced by dispersed ZrC in the bulk composite, SiC and ZrB₂ were later added into the composite and their capability to improve oxidation resistance was examined. SiC was found to form an oxidation layer which could enhance the oxidation resistance. In addition, micro hardness was improved attributing to effective sintering facilitated by silica flow and distribution of ZrC. With an optimum sintering condition and the addition of SiC, thermal conductivity was improved at higher temperature with the help of unoxidized ZrC reinforcement in the bulk composite.     

A hot-pressing reaction technique for SiC coating of carbon/carbon composites

A hot-pressing reactive sintering (HPRS) technique was explored to prepare SiC coating for protecting carbon/carbon (C/C) composites against oxidation. The microstructures of the coatings were analyzed by X-ray diffraction and scanning electron microscopy. The results show that, SiC coating obtained by HPRS has a dense and crack-free structure, and the coated C/C lost mass by only 1.84 wt.% after thermal cycles between 1773 K and room temperature for 15 times. The flexural strength of the HPRS-SiC coated C/C is up to 140 MPa, higher than those of the bare C/C and the C/C with a SiC coating by pressure-less reactive sintering. The fracture mode of the C/C composites changes from a pseudo-plastic behavior to a brittle one after being coated with a HPRS-SiC coating.