High‐Speed Preparation of <111>‐ and <110>‐Oriented β‐SiC Films by Laser Chemical Vapor Deposition

Highly oriented <111> and <110> β‐SiC films were prepared on Si(100) single crystal substrates by laser chemical vapor deposition using a diode laser (wavelength = 808 nm) and HMDS (Si(CH₃)₃–Si(CH₃)₃) as a precursor. The effects of laser power (P_L), total pressure (P_tot), and deposition temperature (T_dep) on the orientation, microstructure, and deposition rate (R_dep) were investigated. The orientation of the β‐SiC films changed from <111> to random to <110> with increasing P_L and P_tot. The <111>‐, randomly, and <110>‐oriented β‐SiC films exhibited dense, cauliflower‐like, and cone‐like microstructures, respectively. Stacking faults were observed in the <111>‐ and <110>‐oriented films, and aligned parallel to the (111) plane in the <111>‐oriented film, whereas they were perpendicular to the (110) plane in the <110>‐oriented film. The highest R_dep of the <111>‐oriented β‐SiC film was 200 μm/h at P_tot = 200 Pa and T_dep = 1420 K, whereas that of the <110>‐oriented film was 3600 μm/h at P_tot = 600 Pa and T_dep = 1605 K.     

Effect of Pressure on Microstructure of <111>‐Oriented β‐SiC Films: Research via Electron Backscatter Diffraction

Scanning electron microscopy (SEM) and high‐resolution electron backscatter diffraction (EBSD) has been employed to study the microstructure development of <111 > ‐oriented β‐SiC films prepared by laser chemical vapor deposition (LCVD) with various total pressure (P_tot). The Surface morphology of films evolved from pyramids with sixfold symmetry to needlelike structure by increasing the P_tot. The EBSD results indicated that the higher P_tot (800 Pa) led to the lower neighbor‐pair misorientation and large in‐plane domains in β‐SiC films.     

Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing

Scaffolds of polycaprolactone (PCL) and PCL composites reinforced with β‐tricalcium phosphate (β‐TCP) were manufactured aiming potential tissue engineering applications. They were fabricated using a three‐dimensional (3D) mini‐screw extrusion printing, a novel additive manufacturing process, which consists in an extrusion head coupled to a 3D printer based on the Fab@Home equipment. Thermal properties were obtained by differential scanning calorimetry and thermogravimetric analyses. Scaffolds morphology were observed using scanning electron microscopy and computed microtomography; also, reinforcement presence was observed by X‐ray diffraction and the polymer chemical structure by Fourier transform infrared spectroscopy. Mechanical properties under compression were obtained by using a universal testing machine and hydrophilic properties were studied by measuring the contact angle of water drops. Finally, scaffolds with 55% of porosity and a pore size of 450 μm have shown promising mechanical properties; the β‐TCP reinforcement improved mechanical and hydrophilic behavior in comparison with PCL scaffolds. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43031.     

Fast preparation of (111)‐oriented β‐SiC films without carbon formation by laser chemical vapor deposition from hexamethyldisilane without H2

(111)‐oriented β‐SiC films were prepared by laser chemical vapor deposition using a diode laser (wavelength: 808 nm) from a single liquid precursor of hexamethyldisilane (Si(CH₃)₃–Si(CH₃)₃, HMDS) without H₂. The effects of laser power (P_L), total pressure (P_tot) and deposition temperature (T_dep) on the microstructure, carbon formation and deposition rate (R_dep) were investigated. β‐SiC films with carbon formation and graphite films were prepared at P_L ≥ 170 W and P_to ≥ 1000 Pa, respectively. Carbon formation strongly inhibited the film growth. β‐SiC films without carbon formation were obtained at P_tot = 400‐800 Pa and P_L = 130‐170 W. The maximum R_dep was about 50 μm·h^?1 at P_L = 170 W, P_tot = 600 Pa and T_dep = 1510 K. The investigation of growth mechanism shows that the photolytic of laser played an important role during the depositions.     

Near‐Net‐Shape Fabrication of Ti3SiC2‐based Ceramics by Three‐Dimensional Printing

This paper focuses on the preparation of near‐net‐shaped dense Ti₃SiC₂‐based materials via an indirect three‐dimensional printing (3D printing) and postreactive melt infiltration (RMI) processes. TiC preforms with bimodal pore size distribution were fabricated through 3D printing, followed by the infiltration of Si melt and Al–Si alloy (Al₄₀Si₆₀ and Al₇₀Si₃₀). Dense composites with density of ~4.1 g/cm³ were obtained after the infiltration. No volume shrinkage was obtained after the reactive infiltration with Al–Si alloy. The participation of Al during the infiltration process promoted the formation of Ti₃SiC₂. The as‐fabricated Ti₃SiC₂‐based materials showed enhanced mechanical and electromagnetic interference shielding properties.     

Kinetic Resolution of Aliphatic β‐Amino Acid Amides by β‐Aminopeptidases

Access to enantiopure β‐amino acids : β‐Aminopeptidases are hydrolases that possess the unique ability to cleave N‐terminal β‐amino acids from peptides and amides. Hydrolysis of racemic β‐amino acid amides catalyzed by these enzymes displays enantioselectivity with strong preference for substrates with the L ‐configuration, and gives access to various aliphatic β‐amino acids of high enantiopurity.

     

Asymmetric α‐Hydroxylation of β‐Indanone Esters and β‐Indanone Amides Catalyzed by C‐2′ Substituted Cinchona Alkaloid Derivatives

The highly catalytic asymmetric α‐hydroxylation of β‐indanone esters and β‐indanone amides using peroxide as the oxidant was realized with a new C‐2′ substituted Cinchona alkaloid derivatives. The two enantiomers of α‐hydroxy‐β‐indanone esters could be obtained by simply changing the oxidant. This protocol allows a convenient access to the corresponding α‐hydroxy‐β‐indanone esters and α‐hydroxy‐β‐indanone amides with up to 99% yield and 98% ee.

     

Fabrication and characterization of poly‐γ‐glutamic acid nanofiber

Poly‐γ‐glutamic acid (γ‐PGA) is a natural polymer that is widely recognized as a component in the viscous filaments of fermented soybean (natto). γ‐PGA is known for its superior biodegradability, biocompatibility and water retention characteristics. Crosslinked γ‐PGA is commonly used as a hydrogel, but it is not used in the fiber form because it is soluble in water. In this study, we demonstrate the use of γ‐PGA‐Na for production of water insoluble γ‐PGA nanofibers by electrospinning. This result was accomplished using an aqueous solvent containing 10 wt % of an oxazoline component polymer as the crosslinking agent and by heat treatment. The crosslinking reaction was evaluated by solid‐state NMR. The nanofiber webs showed a high level of moisture absorption capability while retaining their fibrous shape. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of γ‐Fluoro‐α, β‐unsaturated Carboxylic Esters from Saturated α‐Fluoro Aldehydes

γ‐Fluoro‐α, β‐unsaturated carboxylic esters 7a, 7b and 7d and 4‐fluoro‐4‐phenylbut‐3‐enoic ester ( 8 ) are obtained by two alternative pathways from 2‐fluoro aldehydes 5a—d , either by Horner—Wadsworth—Emmons reaction or by Wittig reaction. The aldehydes 5a—d are prepared by Swern oxidation of the corresponding fluorohydrins 4a—d . These are available from α‐olefins by bromofluorination, bromineby‐acetate replacement and subsequent hydrolysis.     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Efficient Synthesis of β,γ‐Alkynyl α‐Amino Acid Derivatives by Ag(I)‐Catalyzed Alkynylation of α‐Imino Esters

The first catalytic synthesis of β,γ‐alkynyl α‐amino acid derivatives was achieved by direct addition of terminal alkynes to α‐imino esters in the presence of an Ag(I) salt under mild reaction conditions.     

α‐ and β‐crystalline forms of isotactic polypropylene investigated by nanoindentation

Under special crystallization conditions from the melt, both α‐ and β‐forms of isotactic polypropylene were produced simultaneously. The α‐ and β‐spherulites of polypropylene were differentiated under optical microscope, allowing the nanoindentation of individual spherulites of each crystallographic form. Elastic modulus and hardness of β‐spherulites were found to be 10 and 15% respectively lower than in α‐spherulites. The higher stiffness of α may be related to the particular interlocked structure with cross‐hatched lamellae, and to a lower molecular mobility in the crystallites. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 195–200, 1999     

Fabrication of β‐tricalcium phosphate composite ceramic scaffolds based on spheres prepared by extrusion‐spheronization

In this study, β‐tricalcium phosphate/phosphate‐based glass (β‐TCP/PG) composite spheres were prepared by an extrusion‐spheronization method featuring high production and fine control of sphere size. Subsequently, fully interconnected β‐TCP composite ceramic sphere‐based (TCCS) scaffolds were fabricated by sintering the randomly packed β‐TCP/PG composite spheres. The results manifested that at least 20% microcrystalline cellulose (MCC) was required to obtain β‐TCP/PG composite spheres in good spherical shape. The prepared TCCS scaffolds showed hierarchical pore architecture, which consisted of interconnected macropores among the spheres, a hollow core in the sphere, plentiful medium‐sized pores in the sphere shell and micropores among the grains. The pore architecture and mechanical strength of the TCCS scaffolds could be tailored by adjusting the sintering temperature, sphere size, and amounts of PG and MCC in the β‐TCP/PG composite spheres. This work is believed to open up new paths for the design and fabrication of interconnected bioceramic scaffolds for application in bone regeneration.     

Synthesis of α‐Arylphosphonates using Copper‐Catalyzed α‐Arylation and Deacylative α‐Arylation of β‐Ketophosphonates

Efficient methods for the direct arylation and deacylative arylation of β‐ketophosphonates with iodoarenes in presence of a copper(I) or a copper(II) salt as the catalysts have been developed. The corresponding α‐arylphosphonates were obtained in high yields. A tentative mechanism for the deacylative arylation reaction was proposed on the basis of the experimental data.     

Highly Efficient Suzuki Coupling Reaction of α‐Chloroalkylidene‐β‐lactones and β‐Lactams with Organoboronic Acids

The activation of C Cl bond of (Z)‐α‐chloroalkylidene‐β‐lactones and (E)‐α‐chloroalkylidene‐β‐lactams via the Suzuki cross‐coupling reaction is reported in this paper. Alkyl, heteroaromatic, substituted phenyl‐ and alkenylboronic acids can be coupled with a wide variety of α‐chloroalkylidene‐β‐lactones and β‐lactams in excellent yields within a short period of time. The cross‐coupling reaction of optically active substrates leads to the optically active compounds without racemization of the corresponding chiral center.     

Iridium‐Catalyzed Enantioselective Hydrogenation of β,β‐Disubstituted Nitroalkenes

A highly efficient, iridium‐catalyzed, enantioselective hydrogenation of β,β‐disubstituted nitroalkenes has been developed. Using a complex consisting of iridium and (S,S)‐f‐spiroPhos as the catalyst, a variety of β,β‐disubstituted nitroalkenes were successfully hydrogenated to the corresponding chiral nitroalkanes with excellent enantioselectivities (up to 98% ee) and high turnover numbers (TON=1000).

     

Diastereoselective and Enantioselective Epoxidation of Acyclic β‐Trifluoromethyl‐β,β‐Disubstituted Enones by Hydrogen Peroxide with a Pentafluorinated Quinidine‐Derived Phase‐Transfer Catalyst

An efficient catalytic asymmetric epoxidation of β‐trifluoromethyl‐β,β‐disubstituted unsaturated ketones has been achieved by a pentafluorine‐substituted phase‐transfer catalyst with hydrogen peroxide (30%). Thus, the β‐trifluoromethyl‐α,β‐epoxy ketones with a quaternary carbon centre were obtained in excellent diastereoselectivities (up to 100:1 dr) and excellent enantioselectivities (up to 99.7% ee). Low catalyst loading, recycle of catalyst, environmentally benign oxidant and easy transformation of the epoxides into medicinally important trifluoromethylated intermediate make our protocol much more practical.     

Enantioselective Organocatalytic Rearrangement of α‐Acyloxy‐ β‐keto Sulfides to α‐Acyloxy Thioesters

The first highly enantioselective organocatalytic rearrangement of α‐acyloxy‐β‐keto sulfides to α‐acyloxy thioesters has been developed which provides a number of important synthetic building blocks in high yield and with excellent enantioselectivities (ee: up to 92%).     

Organocatalytic Highly Enantioselective Synthesis of β‐Formyl‐α‐hydroxyphosphonates

The cross‐aldol reaction between enolizable aldehydes and α‐ketophosphonates was achieved for the first time by using 9‐amino‐9‐deoxy‐epi‐quinine as the catalyst. β‐Formyl‐α‐hydroxyphosphonates were obtained in high to excellent enantioselectivities. The reaction works especially well with acetaldehyde, which is a tough substrate for organocatalyzed cross‐aldol reactions. The products were demonstrated to have anticancer activities.