Formation-decomposition equilibrium of the NpO<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack>·UO<Stack><Subscript>2</Subscript><Superscript>2+</Superscript></Stack> complex in chloride melts

The absorption spectra of the NpO ₂ ⁺ (5f ²) ion were examined in the region of the 3H ₅ ← ³ H ₄ magnetic dipole transition (1530–1760 nm) for series of melts with the UO ₂ ²⁺ concentration varied in the opposite directions: (1) NaCl-2CsCl eutectic melt with growing additions of the Cs₂UO₂Cl₄ complex salt and (2) Cs₂UO₂Cl₄ melt with growing additions of the NaCl-2CsCl mixture. Measurements of the integrated intensities of the bands belonging to the NpO ₂ ⁺ ·UO ₂ ²⁺ complex and unbound NpO ₂ ⁺ throughout the UO ₂ ²⁺ concentration range examined (up to 4.4 M in neat Cs₂UO₂Cl₄ melt) and processing of the data obtained in terms of the mass action law showed that the formation-decomposition reaction of the cation-cation complex can be described adequately only using the equation of reaction in the form NpO₂Cl ₄ ^3? + UO₂Cl ₄ ^2? ? {Cl₄ONpO?UO₂Cl₃}^4? = Cl^? (with the equilibrium constant of 1.3±0.1). Thus, the formation of the cationcation complex should be treated as replacement of chloride ion in the equatorial plane of uranyl(VI) by neptunyl(V), rather than as simple addition of UO ₂ ²⁺ to NpO ₂ ⁺ . The reverse reaction, decomposition of the cation-cation complex, consists essentially in replacement of neptunyl(V) by chloride ion.     

Stability of the LaCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> and LuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ions Studied by Mass Spectrometry

The enthalpy stability of the LaCl ₄ ^? and LuCl ₄ ^? ions is assessed using high-temperature mass spectrometry. The enthalpy of Cl^? detachment is determined to be Δ_rH⁰(298.15 K) = 332 ± 10 kJ/mol for LaCl ₄ ^? and 359 ± 10 kJ/mol for LuCl ₄ ^? .     

Estimating the effect of C<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and C<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> radicals and neutral clusters on the fullerene formation

The mass spectrum of the products of arc discharge in helium between graphite electrodes has been studied for various values of the gas flow rate. As the gas flow rate increases, the intensity of C₆₀^±, C₇₀^±, C₈₄^± and C₉₀^± fullerene peaks increases and that of the C₂⁻ and C₃⁺ cluster radicals decreases, but the total decay in radicals amounts to only 21% of the total growth of fullerenes. From this it follows that a contribution to the formation of fullerenes from the neutral clusters (which are taken into account for the first time) significantly exceeds the contribution due to small radical species.     

Effects of pH and concentration on ability of Cl<Superscript>−</Superscript> and NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack> to intercalate into a hydrotalcite-like compound during its synthesis

In this study, we confirmed that the characteristics of anion intercalation into the interlayer of a hydrotalcite-like compound (HT) during synthesis are similar to those of the anion-exchange reaction of HTs as well as the reconstruction reaction of HTs from Mg-Al oxide. We demonstrated that (i) Cl⁻, which has a higher charge density than NO₃⁻, more easily reacted with Mg and Al species to form HT structure, resulting in greater intercalation of Cl⁻ into the HT interlayer; and (ii) for HTs with lower Mg: Al molar ratios, OH⁻, which has a higher charge density than Cl⁻ and NO₃⁻, was more likely to interact with Mg and Al species to form HT structure, blocking the intercalation of Cl⁻ and NO₃⁻. Furthermore, we showed that high concentrations of Cl⁻ and NO₃⁻ in solution regulated their intercalation into the HT interlayer. The high activity of Cl⁻ and NO₃⁻ in solution would facilitate the anions’ reactions with Mg and Al species to form HTs, resulting in a high degree of anion intercalation into the interlayer of HTs.     

Characterization of <Superscript>4</Superscript>I<Subscript>9/2</Subscript> ↔ <Superscript>4</Superscript>F<Subscript>3/2</Subscript> optical transitions in trivalent Nd<Superscript>3+</Superscript> ions in GaLaS glass

The positions of Stark levels have been determined, using a step-by-step procedure, in the ⁴I_9/2 and ⁴F_3/2 manifolds of Nd³⁺ ions from absorption and photoluminescence measurements in the 12–293 K temperature range. This data has been used to calculate the emission cross-section for which the maximum value turns out to be ～2.3 × 10^?20 cm². The radiative recombination time, calculated using Judd–Ofelt analysis, of the ⁴F_3/2 manifold is in close vicinity to the experimentally determined times that were measured by the conventional decay of PL after interruption of excitation and by QFRS. Moreover, the peak time defined by QFRS is independent of temperature. Therefore, the dominant relaxation mechanism from the ⁴F_3/2 excited manifold of Nd³⁺ ions in GaLaS glass is believed to be by radiative emission.     

Stability of actinide(III,IV) and lanthanide(III,IV) complexes with P<Subscript>2</Subscript>W<Subscript>17</Subscript>O<Stack><Subscript>61</Subscript><Superscript>10−</Superscript></Stack> heteropolyanions

The total stability constants of Th⁴⁺, U⁴⁺, Np⁴⁺, Pu⁴⁺, Am⁴⁺, Cm⁴⁺, Ce⁴⁺, Tb⁴⁺, Pr⁴⁺, Tb³⁺, and Pr³⁺ complexes with P₂W₁₇O ₆₁ ^10? heteropolyanion in 1 M sodium salt solutions at pH ≥ 5.5 (i.e., when the anion is not protonated; so-called “absolute” constants), were determined experimentally or calculated from published data. Plots of constants vs. ionic radius of the f element were considered for solutions with ionic strength 1 (1 M acid or sodium salt solutions at pH ≥ 5.5). The correlations found confirm that the interaction of counterions in the complex is predominantly electrostatic. At the same time, different contributions of the covalent interaction for actinides and lanthanides were suggested.     

Effect of salts on oxidation of Np(VI) with Fe(CN)<Stack><Subscript>6</Subscript><Superscript>3−</Superscript></Stack> Ions in 0.1–1 M alkali solutions

The potential of the Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ couple in solutions containing 0.5–1 M alkali and high concentrations of Li, Na, and K salts was estimated potentiometrically. The reactions of Fe(CN)₆³⁻ with Np(VI) in such media were studied by spectrophotometry. In 0.5–1 M KOH + 7 M KF or 0.5–1 M KOH + 8 solutions, Np(VI) is oxidized to the heptavalent state with a small excess of Fe(CN)₆³⁻. In the presence of lithium or sodium salts, a larger excess of the oxidant is required for complete oxidation of Np(VI). Carbonate ions in concentrations exceeding 2 M prevent the Np(VI) oxidation.     

The reaction Pu(VI) + Fe(CN)<Stack><Subscript>6</Subscript><Superscript>3−</Superscript></Stack> ⇄ Pu(VII) + Fe(CN)<Stack><Subscript>6</Subscript><Superscript>4−</Superscript></Stack> in NaOH solutions

A spectrophotometric study showed that, in 5 M NaOH, Pu(VII) prepared by ozonation of Pu(VI) is reduced with excess K₄Fe(CN)₆. The Pu(VII) content can be estimated from the amount of the Fe(CN)₆³⁻ formed. In NaOH solutions of concentration exceeding 8 M, the Fe(CN)₆³⁻ ion oxidizes Pu(VI). In 10.3 M NaOH, the tenfold excess of K₃Fe(CN)₆ fully converts 1 mM Pu(VI) to the heptavalent state within 4 min (rate constant 1.3 l mol⁻¹ s⁻¹ at 20°C). With an increase in the NaOH concentration, the oxidation rate increases, and smaller excess of K₃Fe(CN)₆ is required. This oxidant is consumed not only for Pu(VI) oxidation but also in reactions with H₂O and OH⁻ ions. Pu(VII) is unstable and is slowly reduced with water and with products of decomposition of iron complexes.     

Role of Mg<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, and F<Superscript>–</Superscript> ions in octacalcium phosphate crystallization

We have synthesized octacalcium phosphate (OCP) in the presence of inorganic additives (magnesium, strontium, and fluoride ions) and studied the composition, morphology, thermal stability, and dynamic dissolution of the samples thus obtained. It has been shown that, in addition to OCP, magnesium and strontium ions favor the formation of brushite and hydroxyapatite (HA), whereas fluoride ions favor the formation of HA and fluorohydroxyapatite (FHA). We have proposed a process for the preparation of powder materials whose resorption kinetics in corrosive liquid media are corrected by adding dopants capable of activating the dissolution process.     

Disproportionation of nonoxygenated U(V) bound in the complex with heteropoly anions P<Subscript>2</Subscript>W<Subscript>17</Subscript>O<Stack><Subscript>61</Subscript><Superscript>10−</Superscript></Stack>

The effect of experimental conditions on U^VL₂ (1–2 mM) disproportionation was studied spectrophotometrically through the U^IVL₂ accumulation (L = P₂W₁₇O ₆₁ ^10? ). In 1 M NaNO₃ solution containing 0.01 M HAc and 0.01 M NaAc, the rate of U^VL₂ disappearance is described by the equation V = k ₁[U^VL₂]. The k ₁ value is almost constant with pH decreasing from 4.5 to 1.7, but increases with increasing acetate concentration; the presence of 1 mM U^IVL₂, U(VI), or L does not affect k ₁. In the solutions of 0.1–1.0 M HClO₄ (ionic strength 1), the reaction rate is described by the equation V = 2k ₂[H⁺]^2.5[U^VL₂]². Probable disproportionation mechanism is discussed. The first stage is substitution of L by water molecules in the U^IVL₂ complex and appearance of the reactive U(V) complex with mixed coordination sphere.     

Behavior of plutonium in various oxidation states in aqueous solutions: I. Behavior of polymeric Pu(IV) and of Pu(VI) at 10<Superscript>−5</Superscript>–10<Superscript>−8</Superscript> M concentrations in solutions with pH ∼8

Pu(V) does not exist for a long time in solutions at pH ∼8 and concentrations of 10⁻⁵–10⁻⁸ M because of disproportionation to polymeric Pu(IV) and Pu(VI), which form a common polymeric structure that subsequently does not significantly change. Plutonium(III) at its concentrations from 10⁻⁵ to 10⁻⁸ M in solutions at pH ∼8 undergoes oxidation, transforming into polymeric Pu(IV). The data obtained can be useful for interpretation of the plutonium behavior under natural conditions.     

Synthesis,electronic state,and particle size stabilization of nanoparticulate [Co(OH)<Subscript>2</Subscript>(H<Subscript>3</Subscript>O)<Stack><Subscript>δ</Subscript><Superscript>+</Superscript></Stack>]<Superscript>δ+</Superscript>

We have synthesized nanoparticulate cobalt(II) hydroxide containing Co²⁺ in tetrahedral oxygen coordination (Co _Td ²⁺ ), atypical of such systems: nano- [Co(OH)₂(H₃O) _δ ⁺ ]^δ+. The (Co _Td ²⁺ ) coordination in the hydroxide is inferred from its electronic diffuse reflectance spectrum, which shows a multiplet of strong absorption bands at 14500, 15000, and 16000 cm^?1 (⁴ A ₂(F)-⁴ T ₁(P) transition). Nanoparticulate cobalt(II) hydroxide forms in a weakly acidic medium under essentially nonequilibrium conditions due to supersaturation (by three to four orders of magnitude) with the starting reagents (CoCl₂ and LiOH) at the instant of the formation of the poorly soluble phase Co(OH)₂. Presumably, colloidal particles of nanoparticulate cobalt(II) hydroxide in a weakly acidic aqueous medium have a positive surface charge, compensated by a counter-ion (Cl^?) layer: nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ · δCl^?. The XRD patterns of pastes (gels) containing this hydroxide show three broad-ened lines with d = 5.31 (2θ = 16.7°), 2.77 (2θ = 32.3°), and 2.32 Å (2θ = 38.8°). According to small-angle X-ray scattering data, nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ has a narrow particle size distribution (1.0–2.0 nm). Synthesis and storage conditions are identified which ensure stabilization of the electronic state and particle size of nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ for a long time.     

Effect of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> on the dynamics of Li<Superscript>+</Superscript> ions in Li<Subscript>2</Subscript>O·P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Lithium ion transport has been studied in bismuth lithium phosphate glasses in the frequency range 20 Hz–1 MHz and in the temperature range 423–573 K using impedance spectroscopy. The addition of Bi₂O₃ in Li₂O·P₂O₅ glass is related to the modification of the glass structure and facilitates the Li⁺ ions migration. The ac and dc conductivities, activation energy of the dc conductivity and relaxation frequency are extracted from the impedance spectra. Conductivity of the present glass system is found to be ionic in nature. The electrical response of the glasses has been studied using both conductivity and electric modulus formalisms. A single ‘master curve’ for normalized plots of all the modulus isotherms observed for a given composition indicates the temperature independence of the dynamic processes for ions in these glasses. Nearly identical values of activation energy for dc conduction and for conductivity relaxation time indicate that the ions overcome same energy barrier while conducting and relaxing.     

Electrostatic self-assembly behaviour of exfoliated Sr<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>10</Subscript><Superscript>−</Superscript> nanosheets and cobalt porphyrins: exploration of non-noble electro-catalysts towards hydrazine hydrate oxidation

In our research, a convenient exfoliation/restacking route was used to fabricate a sandwich-structured nanocomposite of Sr₂Nb₃O₁₀/CoTMPyP [5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrinato cobalt] via electrostatic interaction between colloidal dispersion and cobalt porphyrin aqueous solution. The final self-assembled products were characterized by XRD, FTIR, UV–Vis, SEM, TEM, AFM, and ICP. During the exfoliation procedure, the well-dispersed Sr₂Nb₃O₁₀^? colloidal dispersion was obtained with the zeta potential value of ? 44.2 mV. Additionally, the existence of unilamellar Sr₂Nb₃O₁₀^? nanosheet was evidenced by AFM, and zeta potential values of the reassembly process with the addition of CoTMPyP aqueous solution into the colloidal dispersion were measured by a Zetasizer Nano apparatus. Above all, the final Sr₂Nb₃O₁₀/CoTMPyP hybrid film displayed excellent electro-catalytic activities towards hydrazine hydrate oxidation with peak potential at 0.158 V in pH 7.0 PBS indicated by CV measurements; moreover, a detection limit of 3.52 × 10^?5 M was obtained in the concentration range of 5 × 10^?5–9.9 × 10^?4 M at a signal-to-noise ratio of 3.0.     

Behavior of plutonium in various oxidation states in aqueous solutions: II. Behavior of Pu(V) and Pu(III) at concentrations of 10<Superscript>−5</Superscript>–10<Superscript>−8</Superscript> M in solutions at pH ∼8

Pu(V) does not exist for a long time in solutions at pH ～8 and concentrations of 10^?5–10^?8 M because of disproportionation to polymeric Pu(IV) and Pu(VI), which form a common polymeric structure that subsequently does not significantly change. Plutonium(III) at its concentrations from 10^?5 to 10^?8 M in solutions at pH ～8 undergoes oxidation, transforming into polymeric Pu(IV). The data obtained can be useful for interpretation of the plutonium behavior under natural conditions.     

Synthesis,characterization and temperature studies on the conductivity of AlCl<Superscript>−</Superscript><Subscript>4</Subscript> ion doped polypyrrole

Synthesis of free standing conducting polypyrrole film using room temperature melt as the electrolyte is reported. We also report variation in the contribution of ionic conductance with temperature of the polymer film by four probe method and electrochemical properties like diffusion coefficient and ionic mobility of AlCl⁻₄ doped polypyrrole film. An attempt has been made to arrive at the stability of charge carrier concentration over a temperature range of 295 to 350 K under vacuum. The film was characterized by optical techniques and scanning electron micrography.     

Photoluminescence of Eu<Superscript>3+</Superscript> ion in SnO<Subscript>2</Subscript> obtained by sol–gel

Photoluminescence data of Eu-doped SnO₂ xerogels are presented, yielding information on the symmetry of Eu³⁺ luminescent centers, which can be related to their location in the matrix: at lattice sites, substituting to Sn⁴⁺, or segregated at particles surface. Influence of doping concentration and/or particle size on the photoluminescence spectra obtained by energy transfer from the matrix to Eu³⁺ sites is investigated. Results show that a better efficiency in the energy transfer processes is obtained for high symmetry Eu³⁺ sites and low doping levels. Emission intensity from ⁵D₀→⁷F₁ transition increases as the temperature is raised from 10 to 240 K, under excitation at 266 nm laser line, because in this transition the multiphonon emission becomes significant only above 240 K. As an extension of this result, we predict high effectiveness for room temperature operation of Eu-based optical communication devices. X-ray diffraction data show that the impurity excess inhibits particle growth, which may influence the asymmetry ratio of luminescence spectra.     

Synthesis and study of uranyl phosphates (UO<Subscript>2</Subscript>)<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>·<Emphasis Type=Italic>n</Emphasis>H<Subscript>2</Subscript>O

Uranyl phosphate (UO₂)₃(PO₄)₂·8H₂O was synthezied. Its dehydration was studied by X-ray diffraction, IR spectroscopy, and thermal and chemical analysis. The dehydration products were isolated and characterized by X-ray diffraction and IR spectroscopy. Their structural features were determined.     

Lewis and Brønsted acids in super-acid catalyst SO<Subscript>4</Subscript><Superscript>2−</Superscript>/ZrO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>

Super-acid catalyst, SO₄ ^2?/ZrO₂–SiO₂, with high zirconium loading was synthesized and the nature of the surface acid was investigated by FT-IR of pyridine adsorption. With the increasing ZrO₂ content, the Lewis and Brønsted acid sites increased and reached the maximum when Zr/Si (molar ratio) = 1.3. The sample with Zr/Si = 1.3 showed the strongest IR adsorption band in the S=O stretching region (1,300–1,400 cm^?1). Pyrosulfate and monosulfate species existed on the surface of the catalysts and the acidic strength could be enhanced by induction effect of their S=O groups. And there were two kinds of Brønsted acid sites on the surface of the catalysts.