Suspension‐deposited carbon‐nanotube networks for flexible active‐matrix displays

Abstract— The unique properties of carbon nanotubes (CNTs) promise innovative solutions for a variety of display applications. The CNTs can be deposited from suspension. These simple and low‐cost techniques will replace time‐consuming and costly vacuum processes and can be applied to large‐area glass and flexible substrates. Single‐walled carbon nanotubes (SWNTs) have been used as conducting and transparent layers, replacing the brittle ITO, and as the semiconducting layer in thin‐film transistors (TFTs). There is no need for alignment because a CNT network is used instead of single CNTs. Both processes can be applied to glass and to flexible plastic substrates. The transparent and conductive nanotube layers can be produced with a sheet resistance of 400 Ω/□ at 80% transmittance. Such layers have been used to produce directly addressed liquid‐crystal displays and organic light‐emitting diodes (OLED). The CNT‐TFTs reach on/off ratios of more than 10⁵ and effective charge‐carrier mobilities of 1 cm²/V‐sec and above.     

基于边缘保留分解和改进稀疏表示的医学图像融合

针对多模态医学图像融合中容易产生伪影且存在细节缺失的问题,提出一种利用多尺度边缘保留分解和稀疏表示的二尺度多模态医学图像融合方法框架。首先利用边缘保留滤波器对源图像进行多尺度分解,得到源图像的平滑层和细节层。然后,将改进的稀疏表示算法用于融合平滑层,并在此基础上提出一种基于图像块筛选的策略来构建过完备字典的数据集,再利用字典学习算法训练出一种联合字典,同时引入一种多范数的活跃度度量方法选择稀疏系数;细节层的融合则采用自适应加权局部区域能量的融合规则。最后将融合后的平滑层和细节层进行多尺度重构得到融合图像。针对三类不同成像模态的医学图像进行对比实验,结果表明,该方法较其他多尺度变换和稀疏表示的方法能够保留更多显著的边缘特征,对比度也有明显提升,在视觉效果和客观评价上都具有一定优势。     

Development of a color‐tunable polychromatic organic‐light‐emitting‐diode device for roll‐to‐roll manufacturing

A flexible vertically stacked flexible polychromatic color‐tunable OLED has been developed by means of low resistive intermediate electrode technology. The polychromatic OLED has a capability to show 16 million colors with 105% National Television Committee Standard (NTSC) color reproduction. The device can produce arbitrary shape with arbitrary colors, suitable for artistic expressions, just as many as those used in information displays. Independently controlled red, green, and blue light‐emitting layers are stacked vertically. With conventional indium tin oxide technology, because of the temperature restriction, it was quite difficult to achieve low resistance on plastic substrate. The reported numbers were all more than 80 Ω/□. According to the surface mobility control using Fick's law analysis, low sheet resistance 7.34 Ω/□ on plastic film was developed. At first, flexible 7.17 cm² transparent OLED was fabricated for the performance confirmation of transparent electrode. And then polychromatic color‐tunable OLED with the same size were successfully fabricated on plastic. With optical length optimization for each color stack of polychromatic OLED, more than 100% color reproduction in National Television Committee Standard was achieved by stack design. The polychromatic device can be used for colored illumination, as well as for organic‐light‐emitting display pixels for three times emission than conventional pixel design. The device is fabricated on plastic substrate so that the polychromatic organic‐light‐emitting‐diode device is manufacturable with roll‐to‐roll production line.     

Separation of Transparent Layers using Focus

Consider situations where the depth at each point in the scene is multi-valued, due to the presence of a virtual image semi-reflected by a transparent surface. The semi-reflected image is linearly superimposed on the image of an object that is behind the transparent surface. A novel approach is proposed for the separation of the superimposed layers. Focusing on either of the layers yields initial separation, but crosstalk remains. The separation is enhanced by mutual blurring of the perturbing components in the images. However, this blurring requires the estimation of the defocus blur kernels. We thus propose a method for self calibration of the blur kernels, given the raw images. The kernels are sought to minimize the mutual information of the recovered layers. Autofocusing and depth estimation in the presence of semi-reflections are also considered. Experimental results are presented.     

Vectorising Bitmaps into Semi‐Transparent Gradient Layers

We present an interactive approach for decompositing bitmap drawings and studio photographs into opaque and semi‐transparent vector layers. Semi‐transparent layers are especially challenging to extract, since they require the inversion of the non‐linear compositing equation. We make this problem tractable by exploiting the parametric nature of vector gradients, jointly separating and vectorising semi‐transparent regions. Specifically, we constrain the foreground colours to vary according to linear or radial parametric gradients, restricting the number of unknowns and allowing our system to efficiently solve for an editable semi‐transparent foreground. We propose a progressive workflow, where the user successively selects a semi‐transparent or opaque region in the bitmap, which our algorithm separates as a foreground vector gradient and a background bitmap layer. The user can choose to decompose the background further or vectorise it as an opaque layer. The resulting layered vector representation allows a variety of edits, such as modifying the shape of highlights, adding texture to an object or changing its diffuse colour.     

Color invariance

This paper presents the measurement of colored object reflectance, under different, general assumptions regarding the imaging conditions. We exploit the Gaussian scale-space paradigm for color images to define a framework for the robust measurement of object reflectance from color images. Object reflectance is derived from a physical reflectance model based on the Kubelka-Munk theory for colorant layers. Illumination and geometrical invariant properties are derived from the reflectance model. Invariance and discriminative power of the color invariants is experimentally investigated, showing the invariants to be successful in discounting shadow, illumination, highlights, and noise. Extensive experiments show the different invariants to be highly discriminative, while maintaining invariance properties. The presented framework for color measurement is well-founded in the physics of color as well as in measurement science. Hence, the proposed invariants are considered more adequate for the measurement of invariant color features than existing methods     

A low‐profile transmitarray antenna using square patch elements with cross dipole slots and vias

A low‐profile transmitarray antenna comprising only a single‐layer substrate and operating at X‐band is presented in this paper. The element consists of two identical metallic layers placed on the upper and lower surfaces of a single‐layer substrate and four vias connecting two metal layers through the substrate. The thickness of the element is 3 mm, corresponding to only 0.1 λ at the design frequency. Metallic layers contain square patches etched with cross dipole slots. By varying the side length of the square patch and adjusting the dimensions of cross dipole slots as well as the locations of the vias, a phase shift of 340° is achieved. A transmitarray using the novel elements is simulated, fabricated, and tested. The simulation and the measurement agree well and the gain at 10 GHz is 25.4 dBi, equivalent to an aperture efficiency of 49%. The low‐profile configuration and satisfactory behavior make this design an appealing candidate for space applications.     

Glass barrier ribs for a transparent AC plasma display

Abstract— Transparent glass barrier ribs are proposed for the development of a transparent plasma display. Glass barrier ribs were fabricated via a wet‐etching process with a 20% hydrofluoric acid. Two different etching methods for glass barrier ribs are investigated: a single‐sided etching method and a double‐sided etching method. Simulation and measurement results show that glass barrier ribs formed by the double‐sided etching method are more transparent compared to those formed by a single‐sided etching method. A fabricated transparent AC plasma display with glass barrier ribs showed good transparency and was operated by using a conventional driving scheme.     

Fragment‐Parallel Composite and Filter

We present a strategy for parallelizing the composite and filter operations suitable for an order‐independent rendering pipeline implemented on a modern graphics processor. Conventionally, this task is parallelized across pixels/subpixels, but serialized along individual depth layers. However, our technique extends the domain of parallelization to individual fragments (samples), avoiding a serial dependence on the number of depth layers, which can be a constraint for scenes with high depth complexity. As a result, our technique scales with the number of fragments and can sustain a consistent and predictable throughput in scenes with both low and high depth complexity, including those with a high variability of depth complexity within a single frame. We demonstrate composite/filter performance in excess of 50M fragments/sec for scenes with more than 1500 semi‐transparent layers.     

The separation of reflected and transparent layers from real-world image sequence

This paper presents an optimal method for the separation of reflected and transparent layers from real-world scene images. Whereas past research has been applied to indoor environments and static cameras, our technique can be used for outdoor scenes and motion cameras. The method is based on spatio-temporal analysis, especially using epipolar plane images (EPI). The edge and color information of EPI has been used to segment the areas on EPIs efficiently and separate the reflected and transparent layers. This method can be used for refining building textures by removing reflections from captured images for the purpose of city modeling.     

基于虚拟机监控技术的可信虚拟域

针对云计算中带内完整性度量方案存在的依赖操作系统安全机制、部署复杂和资源浪费等问题,提出了基于虚拟机监控技术的带外完整性度量方案,可用于为云计算基础设施即服务（IaaS）的租户提供可信的虚拟域。该方案包括域外监控方案和域内外协同监控方案两部分。前者可对开源Linux虚拟域实现完全透明的完整性度量,同时弥补了其他基于系统调用捕获的域外方案所存在的不足。后者将实时度量与预先度量方法、域内度量与域外度量方法、细粒度的注册表度量方法和基于系统调用的域间信息传输方法相结合,可对不完全开源的Windows虚拟域实现完整性度量。实验证明了方案的度量能力是完备的、性能影响是可接受的。     

Dye and polymer based light sensor for tag integration

In this work we present a light sensor for tag integration based on the principle of a dye sensitized solar cell, using a flexible substrate and a polymer electrolyte. These features make an integration of the light sensor into current smart label fabrication processes possible. A printable light sensor combined with novel conductive polymers could solve reliability issues resulting from bonding processes. The components of the light sensor were chosen in a way to enable screen print production. The dye Ruthenium 535-bis-TBA has been used as active dye and Iodolyte AN-50 by Solaronix and PEDOT/PSS by H.C. Starck have been used as liquid and polymer electrolyte respectively. In order to prepare the liquid electrolyte for tag integration it has been gelatinized by addition of silica gel. Depending on the amount of silica gel different stiffness levels have been achieved. The functional layers have been deposited first on glass substrate and then on KAPTON foil by Du Pont. The polymer has been used as flexible substrate. Special care has been taken regarding the preparation of the transparent electrode. The transparent conductive oxide (TCO) indium tin oxide (ITO), which has been used as transparent electrode, has to be cured at elevated temperatures on the polymer substrate. A complete process flow for an integrated light sensor is being described in this work.     

Deep Opacity Maps

We present a new method for rapidly computing shadows from semi‐transparent objects like hair. Our deep opacity maps method extends the concept of opacity shadow maps by using a depth map to obtain a per pixel distribution of opacity layers. This approach eliminates the layering artifacts of opacity shadow maps and requires far fewer layers to achieve high quality shadow computation. Furthermore, it is faster than the density clustering technique, and produces less noise with comparable shadow quality. We provide qualitative comparisons to these previous methods and give performance results. Our algorithm is easy to implement, faster, and more memory efficient, enabling us to generate high quality hair shadows in real‐time using graphics hardware on a standard PC.     

基于Linux环境的包过滤防火墙设计与实现

传统的包过滤防火墙工作在网络层和传输层,根据过滤规则判别的只有网络层和传输层的有限信息,各种安全要求不可能充分满足.本文以Linux为例,在对Linux内核网络接口分析的基础上,通过修改Linux的内核,实现了一个工作在数据链路层的透明包过滤防火墙.     

Characterization of a new system for space-resolved simultaneous in situ measurements of hydrocarbons and dissolved oxygen in microchannels

A space-resolved in situ measurement technique based on laser Raman spectroscopy with high detection sensitivity is described. This method allows the simultaneous detection of the concentrations of dissolved molecular oxygen and of hydrocarbons as well as oxidation products in organic liquids in a microchannel during reaction. It can be used as a new tool for detailed kinetic studies of liquid-phase reaction. Raman spectra are produced using an argon ion laser at 488 nm with a continuous optical power of 100 mW. This radiation is coupled into a microscope and a microchannel. The arising Raman stray light is detected with a spectrometer and a sensitive CCD camera. Special optics were used to collect as much light as possible on the CCD detector. This results in high signals and low noise levels. In order to demonstrate the usefulness of the system, cyclohexane oxidation by oxygen was investigated. In a feasibility study for the products of the cyclohexane oxidation, a limit of detection of 0.05 % m/m for cyclohexanol and 0.01 % m/m for cyclohexanone was achieved. Molecular oxygen dissolved in cyclohexane could be detected at the relevant concentration ranges for carrying out the oxidation of cyclohexane with a limit of detection of 0.01 % m/m. An optically transparent microchannel reactor was built, which can be used up to temperatures of 503 K and pressures of 8 MPa. With this reactor and the in situ measurement technique, space-resolved studies with a measuring volume of 5 μm × 5 μm × 38 μm can now be realized. The spectral selectivity and sensitivity of the measurement technique applied to cyclohexane oxidation, and the characteristics of the spatially resolved measurement technique are discussed.     

Fabrication and characterization of Pb-free transparent dielectric layer for plasma display panel

Glasses within the Bi₂O₃–B₂O₃–BaO–ZnO system were examined as potential replacements for PbO-based glass frits with low firing temperatures. These frits are used in the transparent dielectric layer of plasma display panels (PDP). The glass transition temperature (T_g) of the prepared glasses varied between 450 and 460 °C. These glasses display dynamic dielectric properties, high transparency and thermal expansion as well as matching well with substrate glass. The thermal coefficient of expansion (TCE) was with the desired range of 81–86×10⁻⁷/K. Moreover, when the screen printed film was heat-treated at 570 °C for 30 min, optical transmittance (83%), root-mean square (rms) roughness (177.6 Å), dielectric constant (10.25) and withstand voltage (4.15 kV) satisfied the requirements necessary for transparent dielectric layers to be used in PDP applications.     

Dynamic parameters of electrically controlled light scattering in helix FLC cells

Abstract— The light‐scattering structures in monomeric FLCs have been considered and a mechanism for the scattering on transient domains in the helix layers has been proposed. An optical response with a bistable characteristic of light scattering and transmission was realized at a defined electrical pulse regime and boundary conditions in electro‐optical FLC cells. The total time of the scattering switching on and switching off is less than 400 μsec at ±36 V. They are quite fast, and FLC cells are quite transparent to be used in a stack of 30–100 light‐scattering shutters for a volumetric screen of a 3‐D display.     

Android平台下文件透明加密技术的研究与实现

目前,透明加密技术在Windows平台下已经得到了广泛的应用,但在移动平台下的应用还有待探索。针对目前日益突出的手机数据安全问题,在对比分析了钩子透明加密和驱动透明加密这两种主要透明加密技术的基础上,设计了一种基于Android平台的文件透明加密系统。为了与传统手机加密系统区别开来,系统的身份验证环节被转移到Android手机自带的屏幕解锁环节上,有效提高了加密效率和用户体验。文中描述了该系统的总体设计方案和各个模块的设计方法,并给出了内核模块所使用的一些关键技术和重要的实现方法。测试数据表明,该系统能有效对手机应用程序和文件进行透明加密,同时又有较好的加密效率和用户体验。     

Improving scale adaptation practices in information systems research: Development and validation of a cognitive validity assessment method

Scale adaptation, where authors alter the wording of an already published scale, is a deeply rooted social practice in IS research. This paper argues that the time is ripe to question this activity as well as the beliefs that have progressively formed around it. We identify and challenge five fallacious scale adaptation beliefs that hinder the development of more robust measure development norms. Contributing to this area of research, this paper offers a conceptual definition of the cognitive validity concept, defined as the extent to which a scale is free of problematic item characteristics (PICs) that bias the survey response process and subsequent empirical results. Building on this conceptualization effort, a new methodological process for assessing the cognitive validity of adapted IS measures is introduced. Through a series of three programmatic studies, we find converging evidence that the method can benefit the IS field by making the scale adaptation process more robust, transparent, and consistent. Along with the method, we introduce a new index that IS scholars can use to benchmark the cognitive quality of their scales against venerable IS measures. We discuss the implications of our work for IS research (including detailed implementation guidelines) and provide directions for future research on measurement in IS.     

Adaptive propagation matting based on transparency of image

Image matting is an essential technique in many image and video editing applications. Although many matting methods have been proposed, it is still a challenge for most to obtain satisfactory matting results in the transparent foreground region of an image. To solve this problem, this paper proposes a novel matting algorithm, i.e. adaptive transparency-based propagation matting (ATPM) algorithm. ATPM algorithm considers image matting from a new slant. We pay attention to the transparencies of the input images and creatively assign them into three categories (highly transparent, strongly transparent and little transparent) according to the transparencies of the foreground objects in the images. Our matting model can make relevant adjustment in terms of the transparency types of the input images. Moreover, many current matting methods do not perform well when the foreground and background regions have similar color distributions. Our method adds texture as an additional feature to effectively discriminate the foreground and background regions. Experimental results on the benchmark dataset show that our method gets high-quality matting results for images of three transparency types, especially provides more accurate results for highly transparent images comparing with the state-of-the-art methods.