Direct synthesis of poly(D,L‐lactic acid) by melt polycondensation and its application in drug delivery

Starting from D,L ‐acid and SnCl₂ as catalyst, poly(D,L ‐lactic acid) (PDLLA) was directly synthesized by melt polycondensation. Under the appropriate conditions such as 0.5 wt % SnCl₂, 170–180°C, 70 Pa, and 10 h, the viscosity‐average molecular weight (M_η) of PDLLA was 4100 Da. PDLLA produced by the most practical method was used as the drug‐delivery material for erythromycin and ciprofloxacin. The optimal conditions for the preparation of erythromycin–poly(D,L ‐lactic acid)–microsphere (ERY–PDLLA–MS) for lung targeting was investigated, and further confirmed by good reappearance tests. DSC and SEM demonstrated that ERY–PDLLA–MS had good spherical shape. The release in vitro of ERY–PDLLA–MS was effective and the half‐time (T_1/2) was 51.0 h. After 175 h, the accumulated release percentage was 80.0%. The test in vivo showed that ERY–PDLLA–MS was more easily distributed in rabbit lung tissue. When PDLLA was applied in an antibacterial ciprofloxacin drug‐delivery microsphere (CIP–PDLLA–MS), CIP–PDLLA–MS was also characterized with DSC and SEM, and the release T_1/2 in vitro was 24.9 h. After 53.2 h, the accumulated release percentage reached 84.0%, which indicated that CIP–PDLLA–MS was advantageous to long‐term release. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2143–2150, 2004     

Synthesis of poly(D,L‐lactic acid) modified by cholic acid via direct melt copolycondensation and its characterization

From D,L ‐lactic acid and the natural functional molecule cholic acid (CA), the biodegradable material poly(D,L ‐lactide–cholate) was synthesized via direct copolycondensation. For the CA/lactic acid (LA) molar feed ratio of 1/64, the optimal synthesis conditions were as follows: a prepolymerization time of 8 h, 0.3 wt % SnO catalyst, and melt copolycondensation for 8 h at 160°C, which gave a novel star‐shaped poly(D,L ‐lactic acid) (PDLLA) modified by CA with the maximum weight‐average molecular weight of 5600 Da at a yield of 51.9%. The copolymer poly(D,L ‐lactide–cholate) at different molar feed ratios was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, thermogravimetry, and X‐ray diffraction. Decreasing the molar feed ratio of CA/LA from 1/15 to 1/128 reduced the average number of CA units embedded in the copolymer from 4 to 1. With 1/15 CA/LA, the copolymer was not a star‐shaped polymer, and its weight‐average molecular weight was the biggest (weight‐average molecular weight = 12,700 Da, weight‐average molecular weight/number‐average molecular weight = 1.68). With 1/32 CA/LA, the copolymer with two CA units was not a star‐shaped polymer either. With 1/64, 1/100, and 1/128 CA/LA, the copolymer mainly had one CA unit core embedded as a normal star‐shaped PDLLA with four arms, and certain crystallinity could be detected. The novel direct copolycondensation method was simple and practical for the synthesis of the asymmetrical star‐shaped PDLLA material, and it was advantageous for this PDLLA material embedded in the special bioactive molecule CA to be applied in the field of drug delivery and tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of the biomaterial poly(lactic acid‐co‐Nε‐carbobenzoyloxy‐L‐lysine) via direct melt copolymerization

With D,L ‐lactic acid and N^ϵ‐carbobenzoyloxy‐L ‐lysine [Lys(Z)] as the starting monomer material and tin dichloride as the catalyst, the drug carrier material poly(lactic acid‐co‐N^ϵ‐carbobenzoyloxy‐L ‐lysine) was synthesized via direct melt polycondensation. The copolymer was systematically characterized with intrinsic viscosity testing, Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and X‐ray diffraction. The influences of different feed molar ratios were examined. With increasing molar feed content of Lys(Z), the intrinsic viscosity, weight‐average molecular weight, and polydispersity index (weight‐average molecular weight/number‐average molecular weight) gradually decreased. Because of the introduction of Lys(Z) with a big aromatic ring into the copolymer, the glass‐transition temperature gradually increased with increasing feed charge of Lys(Z), and all of the copolymers were amorphous. The copolymers, with weight‐average molecular weights from 10,500 to 6900 Da, were obtained and could reach the molecular weight level of poly(lactic acid) modified by Lys(Z) via the ring‐opening polymerization of the cyclic intermediates, such as lactide and morpholine‐2,5‐dione. However, a few terminal carboxyl groups might have been deprotected during the polymerization reaction under high temperatures. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and structure control of l‐lactic acid–glycolic acid copolymer by homo‐copolymerization

A two‐step direct melt copolymerization process of l ‐lactic acid (L ‐LA)/glycolic acid (GA) was developed: poly(l ‐lactic acid) (PLLA) and poly(glycolic acid) (PGA) with different molecular weight was first synthesized respectively by binary catalyst (tin chloride/p‐toluenesulfonic or tin chloride); and then poly(l ‐lactic‐co‐glycolic acid) (b‐PLGA) was produced by melt polymerization of the as‐prepared PLLA and PGA, wherein the composition and chain structure of b‐PLGA copolymers could be controlled by the molecular weight of PLLA. The chain structure and thermal properties of copolymers were studied by Wide‐angle X‐ray diffraction, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. In comparison with the random PLGA (r‐PLGA) synthesized by one‐step direct melt polymerization, the average l ‐lactic blocks length (L_LA) in b‐PLGA was longer while the average glycolic blocks length (L_GA) in b‐PLGA was shorter which further resulted in the improved crystallinity and thermostability. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41566.     

Ternary polymer blends based on poly(lactic acid): Effect of stereo‐regularity and molecular weight

The effects of stereo‐regularity and molecular weight of poly(lactic acid) (PLA) on ternary polymer blends was analyzed using optical clarity as the primary screening method. This enabled the ready identification of phase boundaries of optically clear and apparently miscible regions. Solvent‐mediated blends of amorphous poly(dl ‐lactide) (PDLLA) and semi‐crystalline poly(l ‐lactide) (PLLA) with various molecular weights from high to low, along with polycaprolactone (PCL) and cellulose acetate butyrate (CAB) were used in this study. The nature and extent of crystallinity of the blends was examined by X‐ray diffraction, which, in conjunction with differential scanning calorimetry, scanning electron microscopy, and Fourier transform infrared spectroscopy, provided information about the competition between polymer crystallization (self‐aggregating behavior) and intermixing of the macromolecules. Thus, allowing the primary physical cause of transparency loss to be identified. The results of the ternary blends optical clarity showed the position of the phase boundaries in PLLA/PCL/CAB and PDLLA/PCL/CAB blends are significantly affected by the stereo‐regularity and molecular weight of PLA. The PDLLA (amorphous) blend shows comparable regions of phase separation with high molecular weight and semi‐crystalline PLLA blends even though the molecular weight is much lower. The blends of the shorter chain PLLA1 tend to show more crystalline regions. The optical transparency, miscibility, and crystallinity of the blends are not only affected by the stereo‐regularity and molecular weight of PLA but also the crystallizable PCL, especially at high loading. These findings give useful information to the film‐packaging sector where good optical clarity is a critical performance requirement. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41780.     

Thermal properties and miscibility of semi‐crystalline and amorphous PLA blends

The focus of this research is the study of the microstructures and miscibility at the interface between semi‐crystalline and amorphous PLAs [poly (l ‐lactic acid)(PLLA) with poly (l ,d ‐lactic acid)(PDLLA), respectively]. The blends are prepared through thermal processing (extrusion and hot‐pressing). To increase the area of interface between PDLLA and PLLA, the fibers from PLLA and PDLLA are used. Thermal and microstructures of the blends were studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM), dynamic thermogravimetric analysis(DMA), small‐angle X‐ray diffraction(SAXS) and wide‐angle X‐ray diffraction (WAXD). The two PLAs are miscible in molten state. However, phase separation is detected after various thermal treatments, with PDLLA being excluded from the regions of interlamellar PLLA regions when PDLLA content is low, as determined from X‐ray diffraction studies. The compatibility between the two PLAs is not perfect in the molten state, since enthalpies of the various blends at T_g are lower than any pure PLA material. The semi‐crystalline PLLA fiber can recrystallize alone in the molten amorphous PDLLA, and a higher nuclei density is observed at the interface. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41205.     

Synthesis and properties of crystalline dicarboxylated poly(L‐lactic acid) prepolymers

Crystalline dicarboxylated poly(L ‐lactic acid)s (dcPLLAs) with number‐average molecular weights (M_n's) of 10³ to 10⁴ g/mol were synthesized via the melt polycondensation of L ‐lactic acid (LLA) in the presence of succinic anhydride (SAD), with tin(II) chloride and toluene‐4‐sulfonic acid as binary catalysts. They were characterized by end‐group titration, ¹H‐NMR, differential scanning calorimetry, and wide‐angle X‐ray diffraction. The terminal COOH percentage reached over 98%, and the molecular weight could be controlled by the molar ratio of LLA to SAD. The thermal behaviors depended on the molecular weight. The poly(L ‐lactic acid)s (PLLAs) crystallized slowly for M_n ≤ 2000 but quickly for M_n ≥ 4000. The crystallinity increased from 27 to 40% when M_n grew from 4000 to 10,000. With comparison to ordinary PLLA, the dcPLLA had the same crystallization structure but a slightly lower crystallizability. The glass‐transition temperature was clearly higher than that of amorphous dcPLLAs. With a controllable molecular weight, high COOH percentage, and crystallinity, the dcPLLA with M_n ≥ 4000 appeared to be a suitable prepolymer for the preparation of high‐molecular‐weight crystalline PLLA via chain extension. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of poly(D,L‐lactic acid) modified by triethanolamine by direct melt copolycondensation and its characterization

Using D ,L ‐lactic acid (LA) and multifunctional group compound triethanolamine (TEA) as starting materials, a novel biodegradable material poly(D ,L ‐lactic acid‐triethanolamine) [P(LA‐TEA)] was directly synthesized by simpler and practical melt polycondensation. The appropriate synthetic condition was discussed in detail. When the molar feed ratio LA/TEA was 30/1, the optimal synthesis conditions were as follows: a prepolymerization time of 12 h; 0.5 weight percent (wt %) SnO catalyst; and melt copolycondensation for 8 h at 160°C, which gave a novel star‐shaped poly(D,L ‐lactic acid) (PDLLA) modified by TEA with the maximum intrinsic viscosity [η] 0.93 dL g⁻¹. The copolymer P(LA‐TEA) as a different molar feed ratio was characterized by [η], Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). Increasing the molar feed ratio of LA/TEA, T_g and M_w increased. However, all copolymers were amorphous, and their T_g (12.2°C–32.5°C) were lower than that of homopolymer PDLLA. The biggest M_w was 9400 Da, which made the biodegradable polymer be potentially used as drug delivery carrier, tissue engineering material, and green finishing agent in textile industry. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Syntheses of poly(lactic acid‐co‐glycolic acid) serial biodegradable polymer materials via direct melt polycondensation and their characterization

The optimal synthetic conditions of poly(lactic acid‐co‐glycolic acid) (PLGA) via melt copolycondensation directly from L ‐lactic acid (L ‐LA) and glycolic acid (GA) with a feed molar ratio of 50/50 are discussed; the important drug‐delivery carrier PLGA50/50 is used as a special example. With reaction conditions of 165°C and 70 Pa and with 0.5 wt % SnCl₂ as the catalyst, 10 h of polymerization gave the L ‐PLGA50/50 with the biggest intrinsic viscosity ([η]), 0.1993 dL/g. The optimal synthetic conditions were verified by the synthesis of D,L ‐PLGA50/50 with D,L ‐lactic acid (D,L ‐LA) instead of L ‐LA, but the biggest [η] was 0.2382 dL/g. Under the same synthetic conditions with L ‐LA and D,L ‐LA as starting materials, serial PLGA with different molar feed ratios, including 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100, were synthesized via simple and practical direct melt copolycondensation, and their solubilities were investigated. When the glycolic acid feed molar percentage was equal to or more than 70%, solubilities in tetrahydrofuran and CHCl₃ became worse, and some samples were even wholly insoluble. These biodegradable polymers were also systematically characterized with gel permeation chromatography, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and X‐ray diffraction. PLGA synthesized from L ‐LA and D,L ‐LA had many differences in weight‐average molecular weight (M_w), glass‐transition temperature, crystallinity, and composition. When the molar feed ratio of LA to GA was 50/50, both the [η] and M_w values of D,L ‐PLGA were higher than those of L ‐PLGA. With D,L ‐LA as the starting material, the structure of the PLGA copolymer was relatively simple, and its properties were apt to be controlled by its GA chain segment. When the feed molar percentage of the monomer (LA or GA) was more than or equal to 90%, the copolymer was apt to be crystalline, and the aptness was more obvious for the L ‐LA monomer. The composition percentage of GA in PLGA was not only higher than the feed molar percentage of GA, but also, the GA percentage in D,L ‐PLGA was higher than in L ‐PLGA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 244–252, 2006     

Synthesis and characterization of amphiphilic biodegradable poly(glutamic acid‐co‐lactic acid‐co‐glycolic acid) by direct polycondensation

Poly(glutamic acid‐co‐lactic acid‐co‐glycolic acid) (PGLG), an amphiphilic biodegradable copolymer, was synthesized by simply heating a mixture of L ‐glutamic acid (Glu), DL ‐lactic acid, and glycolic acid with the present of stannous chloride. The unique branched architecture comprising of glutarimide unit, polyester unit, and polyamide unit was confirmed by NMR spectrum. The PGLG was soluble in many organic solvents and aqueous solution of sodium hydroxide (pH ≥ 9.0). The thermal properties were evaluated using thermogravimetric analysis and differential scanning calorimetry. Molecular weights were determined by ¹H NMR end‐group analysis and GPC, respectively, and the results indicated that the higher Glu content resulted in a decrease of the molecular weight. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Methoxy poly(ethylene glycol)‐b‐poly(L‐lactic acid) copolymer nanoparticles as delivery vehicles for paclitaxel

Methoxy poly(ethylene glycol)‐b‐poly(L ‐lactic acid) (MPELLA) was prepared by the melt polycondensation of methoxy poly(ethylene glycol) and L ‐lactic acid. The structure and properties of MPELLA were characterized by IR, ¹H‐NMR, differential scanning calorimetry, and wide‐angle X‐ray diffraction. To estimate its feasibility as a vehicle for paclitaxel, MPELLA nanoparticles were prepared by a self‐emulsification/solvent evaporation method. The paclitaxel‐loaded nanoparticles (PMTs) showed a spherical morphology with an inner core and an outer shell. The size, size distribution, and loading capacity of PMTs were also measured. The release kinetics of paclitaxel from PMTs in vitro was studied. The results show that paclitaxel can be effectively incorporated into MPELLA nanoparticles, which provide a delivery system for paclitaxel and other hydrophobic or toxic compounds. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2116–2122, 2005     

Synthesis and chain extension of poly(L‐lactic acid‐co‐succinic acid‐co‐1,4‐butene diol)

L ‐Lactic acid (LA) was copolymerized with succinic acid (SA) and 1,4‐butenediol (1,4‐BED) in bulk state with titanium(IV) butoxide as a catalyst to produce poly(LA‐co‐SA‐co‐1,4‐BED) (PLASBED). Poly(L ‐lactic acid) (PLLA) homopolymer obtained from a direct condensation polymerization of LA had weight average molecular weight (M_w) less than 4.1 × 10⁴ and was too brittle to prepare specimens for the tensile test. Addition of SA and 1,4‐BED to LA produced PLASB with M_w as high as 1.4 × 10⁵ and exhibited tensile properties comparable to a commercially available high‐molecular‐weight PLLA. Chain extension by intermolecular linking reaction through the unsaturated 1,4‐BED units in PLASBED with benzoyl peroxide further increased the molecular weight and made PLASBED more ductile and flexible to show elongation at break as high as 450%. Biodegradability of PLASBED measured by the modified Sturm test was nearly independent of the 1,4‐BED content. Gel formation during the chain extension did not exert any significant influence on the biodegradability either. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1116–1121, 2005     

Optimization of the reaction conditions and characterization of L‐lactic acid direct polycondensation products catalyzed by a non‐metal‐based compound

In this article, we deal with the investigation into a poly(lactic acid) (PLA) preparation process catalyzed by a non‐metal‐based compound. Low‐molecular‐weight PLA was synthesized by the direct melt polycondensation of L ‐lactic acid catalyzed by methanesulfonic acid (MSA). This study was focused on the investigation into optimal MSA concentration determination and into the temperature (130, 145, 160, 175, and 190°C) and time (6, 12, 18, and 24 h) influence on the structure (Fourier transform infrared spectroscopy), molecular weight (viscometric measurements and gel permeation chromatography), and thermal properties (differential scanning calorimetry) of the samples. The results show an optimal MSA content of 0.5 wt %. The highest molecular weight of PLA prepared by this method was reached after 18 h of reaction at 175°C (weight‐average molar mass = 17.2 × 10³ g/mol). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal hydrolysis of poly(l‐lactic acid) films and cytotoxicity of water‐soluble degradation products

In this study, the thermal hydrolysis of the poly(l ‐lactic acid) (PLLA) films was investigated for its potential use as a food‐packaging ecomaterial. The surface morphology, mass loss, molecular weight, thermal properties, and medium pH were routinely investigated; meanwhile, in particular, the composition and cytotoxicity of the water‐soluble degradation products were studied. The changes in the mass loss and molecular weight revealed a random chain‐scission mechanism. Differential scanning calorimetry analysis implied that the hydrolysis preferentially took place in the amorphous region. The medium pH decreased with time because of the accumulation of acid water‐soluble products in the medium. Liquid chromatography/mass spectrometry analysis proved that these products were composed of 1–13 lactic acid units, in which the content of l ‐lactic acid increased with time and reached 9.71 mmol/L after hydrolysis for 84 days. The in vitro cell culture indicated that the water‐soluble degradation products from the PLLA films had no cytotoxicity to human umbilical vein endothelial cells. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42064.     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Glass transition and mechanical properties of PLLA and PDLLA‐PGA copolymer blends

The change of the glass transition temperatures (T_g) in the blend of poly(L ‐lactic acid) (PLLA) and the copolymers of poly(D,L ‐lactic acid) and poly(glycolic acid) (PDLLA‐PGA) with different D,L ‐lactic acid and glycolic acid composition ratio (50 : 50, 65 : 35, and 75 : 25) was studied by DSC. Dynamic mechanical measurement and tensile testing were performed at various temperatures around T_g of the blend. In the blend of PLLA and PDLLA‐PGA50 (composition ratio of PDLLA and PGA 50 : 50), T_g decreased from that of PLLA (about 58°C) to that of PDLLA‐PGA50 (about 30°C). A single step decrease was observed in the DSC curve around T_g between the weight fraction of PLLA (W(PLLA)) 1.0 and 0.7 (about 52°C) but two‐step changes in the curve are observed between W(PLLA) = 0.6 and 0.3. The T_g change between that of PLLA and that of PDLLA‐PGA and the appearance of two T_gs suggest the existence of PLLA rich amorphous region and PDLLA‐PGA copolymer rich amorphous region in the blend. A single step decrease of E′ occurs at around T_g of the pure PLLA but the two‐step decrease was observed at W(PLLA) = 0.6 and 0.4, supporting the existence of the PLLA rich region and PDLLA‐PGA rich region. Tensile testing for various blends at elevated temperature showed that the extension without yielding occurred above T_g of the blend. Partial miscibility is suggested for PLLA and PDLLA‐PGA copolymer blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2164–2173, 2004     

Poly(DL-lactide)/poly(ethylene glycol) copolymer particles. I. Preparation and characterization

In this study, poly(DL -lactide)/poly(ethylene glycol) (PDLLA/PEG) copolymers were synthesized. First, PDLLA homopolymers with three different molecular weights (Mw_n: 7,300, 12,100 and 21,900) were synthesized by the ring opening polymerization of the dimer (i.e., DL-lactide) by using stannous chloride as catalyst. Average molecular weights of PDLLAs were determined by gel permeation chromatography (GPC). They were characterized by Fourier transform infrared and differential scanning calorimetry (DSC). These PDLLA homopolymers were then transesterified with PEG with a molecular weight range of 3,300–4,000. By changing the ratio of PEG to PDLLA, block copolymers with different chain structures were synthesized. DSC and GPC studies were performed to characterize these PDLLA/PEG copolymers. PDLLA and PDLLA/PEG particles in the size range of 2–10 μm were prepared by a modified solvent evaporation technique by using methylene chloride as solvent and methyl cellulose as emulsifier within the aqueous dispersion medium. Particle size was controlled by changing the solvent/polymer ratio, PDLLA molecular weight, and PEG content. Degradation of polymeric particles was investigated in a phosphate buffer at pH 7.4 and at 37°C. Particles prepared with low-molecular-weight PDLLAs degraded much faster. Introduction of PEG within the polymeric matrix caused a pronounced increase in the degradation rate. Bulk degradation was the dominant mechanism. © 1996 John Wiley & Sons, Inc.     

Preparation and evaluation of novel blend microspheres of poly(lactic‐co‐glycolic)acid and pluronic F68/127 for controlled release of repaglinide

The objective of the present work was to study the release behavior of plain and blend microspheres (MS) of PLGA and Pluronic F68/127. In this study, a novel blend MS of poly(D ,L ‐lactic‐co‐glycolic acid) (PLGA) and Pluronic F68/127 (PLF68/127) were prepared by the emulsion–solvent evaporation method. Repaglinide, an antidiabetic drug with a very short half‐life, was successfully encapsulated into the blend MS. Various formulations were prepared by varying the ratio of PLGA and PLF68/127. Drug encapsulation up to 91% was achieved as measured by UV spectroscopy. Scanning electron microscopy showed that MS have smooth surfaces even after incorporation of PLF68/127. Particle size, as measured by using laser light scattering technique, gave an average size ranging from 12 to 47 μm. Differential scanning calorimetry (DSC) was performed to understand the crystalline nature of the drug after encapsulation into MS. DSC revealed the crystalline dispersion in the polymer matrix. In vitro release experiments performed in simulated intestinal fluid, indicated the dependence of release rate on the amount of PLF68/127 present in the MS; slow release was extended up to 153 h. Release data have been fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism to be non‐Fickian type. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(dl‐Lactic Acid)‐Based Linear Polyurethanes Capable of Forming Physical Crosslinking via UPy Quadruple Hydrogen Bonding Assembly

Linear shape memory polyurethanes based on poly(dl ‐lactic acid) (PDLLA) macrodiol (PDLLA‐SMPUs) have various advantages such as good processability, biodegradability, shape memory effect, and biocompatibility, yet the insufficient mechanical properties prevent their effective applications in bone repair. 2‐Ureido‐4[1H]‐pyrimidone (UPy) can form strong quadruple hydrogen bonding. Here, a new linear PDLLA‐SMPU containing pendant UPy units (UPy‐p‐PDLLA‐SMPU) is designed and synthesized. The pendant UPy units may dimerize to form physical crosslinking among UPy‐p‐PDLLA‐SMPU chains. As a result, UPy‐p‐PDLLA‐SMPU demonstrates both good processability and significantly higher mechanical properties than the corresponding linear PDLLA‐SMPU without pendant UPys. In addition, UPy‐p‐PDLLA‐SMPU shows excellent shape memory effect near body temperature, with a shape fixity ratio of up to 98.6% and a recovery ratio of up to 92.9%. This work provides a new strategy to design SMPUs integrating the merits of linear and crosslinked polyurethanes, and the obtained UPy‐p‐PDLLA‐SMPU is a promising material for bone tissue repair in view of the mechanical, thermal, and shape memory properties.