Adsorption of heavy‐metal ions on poly(ethylene imine)‐immobilized poly(methyl methacrylate) microspheres

Poly(methyl methacrylate) (PMMA) microspheres carrying poly(ethylene imine) (PEI) were prepared for the removal of heavy‐metal ions (copper, cadmium, and lead) from aqueous solutions with different amounts of these ions (50–600 mg/L) and different pH values (3.0–7.0). Ester groups in the PMMA structures were converted to imine groups in a reaction with PEI as a metal‐chelating ligand in the presence of NaH. The adsorption of heavy‐metal ions on the unmodified PMMA microspheres was very low [3.6 μmol/g for Cu(II), 4.6 μmol/g for Cd(II), and 4.2 μmol/g for Pb(II)]. PEI immobilization significantly increased the heavy‐metal adsorption [0.224 mmol/g for Cu(II), 0.276 mmol/g for Cd(II), and 0.126 mmol/g for Pb(II)]. The affinity order of adsorption (in moles) was Cd(II) > Cu(II) > Pb(II). The adsorption of heavy‐metal ions increased with increasing pH and reached a plateau value around pH 5.5. Their adsorption behavior was approximately described with the Langmuir equation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 197–205, 2001     

Polyelectrolyte‐assisted removal of metal ions with ultrafiltration

The water‐soluble polymers poly(styrene sulfonic acid‐co‐maleic acid) and poly(acrylic acid‐co‐maleic acid) were investigated with respect to their metal‐ion‐binding ability with ultrafiltration. The studied metal ions included Ag(I), Cu(II), Ni(II), Co(II), Ca(II), Mg(II), Pb(II), Cd(II), Zn(II), Al(III), and Cr(III) ions. The retention properties of the polyelectrolytes for the metal ions depended strongly on the ligand type. As for the carboxylate ligands, with increasing concentration and pH, the metal‐binding affinity increased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1091–1099, 2005     

Poly(sodium 4-styrenesulfonate)–metal ion interactions

The metal ion-binding properties of poly(sodium 4-styrenesulfonate) in conjunction with membrane filtration were investigated for Cu(II), Cd(II), Co(II), Cr(III), Hg(II), Ni(II), Pb(II), Zn(II), and Fe(II). Different experiments were carried out at different pH's, metal ion concentrations, polymer concentrations, and molecular weight fractions. Only Fe(II) and Cr(III) were retained at pH 1, which allows a selective separation of these metals from all the other metal ions. At pH 3 the retention ability of this polymer increased for all the metal ions. On the other hand, the metal ion-retention properties are dependent on the polymer/metal ratio. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 219–225, 1998     

Poly(2-acrylamido glycolic acid): A water-soluble polymer with ability to interact with metal ions in homogenous phase

A water-soluble polymer, poly(2-acrylamido glycolic acid) was obtained by radical polymerization and characterized by FT-IR, ¹H NMR, and ¹³C NMR spectroscopy. The metal ion retention properties were investigated through the liquid-phase polymer based retention (LPR) technique at different pHs and filtration factor Z. The affinity of the ligand groups for the metal ions depends strongly on the pH. At lower pH, the retention is lower than 50%, which increased as the pH increased. At pH 5, the polymer showed a high affinity and selectivity for Pb(II), and at pH 7 the P(AGA) formed stable complexes with Cu(II), Co(II), Ni(II), Cd(II), and Pb(II). Of the three potential ligand groups, amide, hydroxyl, and carboxylate groups, the carboxylate groups form the more stable complexes with the metal ions.     

Water‐soluble copolymers of 1‐vinyl‐2‐pyrrolidone and acrylamide derivatives: synthesis,characterization, and metal binding capability studied by liquid‐phase polymer‐based retention technique

Radical copolymerizations of 1‐vinyl‐2‐pyrrolidone with acrylamide and N,N′‐dimethylacrylamide at different feed ratios were investigated. The copolymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR spectroscopy. The copolymer composition was determined from the ¹H NMR spectra and found to be statistical. The metal complexation of poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone) and poly(N,N′‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) for the metal ions Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Fe(III), and Cr(III) were investigated in an aqueous phase. The liquid‐phase polymer‐based retention method is based on the retention of inorganic ions by soluble polymers in a membrane filtration cell and subsequent separation of low‐molecular compounds from the polymer complex formed. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. Poly(N,N‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) showed a higher affinity for the metal ions than poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone). According to the interaction pattern obtained, Cr(III) and Cu(II) formed the most stable complexes at pH 7. Pb(II) and Zn(II) were not retained. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 741–750, 1999     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Selective retention properties to silver(I) and mercury(II) ions of poly(4‐vinylpyridine) methyl iodide studied by the liquid‐phase polymer‐based retention technique

The retention of various metal ions by water‐soluble poly(4‐vinylpyridine) methyl iodide in conjunction with ultrafiltration membrane was investigated. The method is based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molecular weight species from the polymer metal ion complex formed. It is shown that the polychelatogen can bind silver(I) and mercury(II) ions in aqueous solution at pH 1. At higher pH, the water‐soluble polymer can be applied to the separation and preconcentration of silver metal ions. Therefore, this polychelatogen is highly selective to Hg(II) at pH 1 with respect to metal ions such as Cd(II) and Zn(II). © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2578–2582, 2001     

Poly(N,N′-dimethylacrylamide-co-acrylic acid): Synthesis,characterization, and application for the removal and separation of inorganic ions in aqueous solution

The synthesis of poly (N,N′-dimethylacrylamide-co-acrylic acd) under different feed molar ratios was carried out by radical polymerization. Both homopolymers were also synthesized to compare the metal ion binding abilities. All polymers were water-soluble and were characterized by FTIR, ¹H-NMR, ¹³C-NMR, and TGA. The metal complexing properties for the metals Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Hg(II), Cr(III), and Fe(III) in the aqueous phase were investigated using the liquid-phase polymer-based retention (LPR) method. The metal ion interactions with the hydrophilic polymer were determined as a function of pH and the filtration factor. According to the interaction pattern obtained, the metal ions form the most stable complexes with the copolymer poly(N,N′-dimethylacrylamide-co-acrylic acid) within the pH range 5–7. Hg(II) was not retained at all the pH ranges investigated. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 93–100, 1998     

Synthesis and properties of hydrophilic polymers,part 11: Synthesis,biodegradability, and metal complexation of copolymers of ethylenediaminetetraacetic acid dianhydride and lactose

The synthesis and characterization of poly(ethylenediaminetetraacetic acid‐co‐lactose) of high molar mass (132 kg mol^?1) is described. The polycondensate with pendant carboxylic groups was shown to be hydrolytically and microbiologically degradable by using conventional microbiological methods. The metal complexing properties of the polyester were studied for Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Sr(II), Cd(II), Pb(II), and Al(III) ions in aqueous solution using the liquid‐phase polymer‐based retention (LPR) method. In addition, the complexing capacity of the Cu(II)‐saturated copolymer was determined by TGA to be 182 mg g^?1 polymer. According to the retention profiles determined as a function of filtration factor by using LPR in conjunction with inductively coupled plasma spectrometry, Cr(III) and Fe(III) showed a strong interaction with this polymer under these conditions, indicated by retention values of 100% at pH 5. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2932–2939, 2007     

Novel water‐soluble acryloylmorpholine copolymers: Synthesis,characterization, and metal ion binding properties

Poly(4‐acryloylmorpholine), poly(4‐acryloylmorpholine‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid), and poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) were synthesized by radical polymerization. The water‐soluble polymers obtained, containing tertiary amino, amide, and sulfonic acid groups, were investigated, in view of their metal binding properties, as polychelatogens by using the liquid‐phase polymer‐based retention technique, under different experimental conditions. The metal ions investigated were Ag(I), Cu(II), Co(II), Ni(II), Cd(II), Pb(II), Zn(II), Cr(III), and Al(III). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 180–185, 2006     

Branched poly(ethylene imine) support for resins with retention properties for heavy metal ions

A crosslinked poly(ethylene imine), using epichlorohydrin as crosslinker, was prepared and subsequently modified in order to obtain the corresponding N-methylated, N-carboxymethylated and N-phosphonomethylated derivatives. The sorption characteristics of these functionalized resins were studied by a batch equilibration technique, for uptake of Cu(II), Fe(II), Fe(III) and uranyl ions from aqueous solution. Resins with tertiary amine or ammonium groups show negligible sorption for Fe(II), Fe(III) and Cu(II) at pH 1, in contrast with high sorption for U(VI), which is readily eluted with sodium carbonate.     

Part 8. Preparation,characterization and metal complexing of poly[(2‐hydroxyethyl)‐DL‐aspartamide] in aqueous solution

Poly[(2‐hydroxyethyl)‐DL ‐aspartamide] was synthesized by polyreaction of aspartic acid and subsequent polymer‐analogous functionalization with ethanolamine. The water‐soluble polymer was characterized by FTIR, NMR, TGA and light‐scattering measurements. The metal complexing properties of the polymer were studied for Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Sr(II), Cd(II) and Pb(II) ions in aqueous solution using the liquid‐phase polymer‐based retention (LPR) method. According to the retention profiles of LPR, Cr(III), Fe(III), Cu(II) and Pb(II) showed a strong interaction with this polymer under these conditions, indicated by retention values of about 100 %. In contrast, Co(II), Ni(II), Zn(II), Sr(II) and Cd(II) exhibited retention values of only 50–60 % in dilute solution at pH 5. © 2000 Society of Chemical Industry     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Metal ion interaction of water‐soluble copolymers containing carboxylic acid groups in aqueous phase by membrane filtration technique

This article reports the synthesis of poly(N‐maleoylglycine‐co‐itaconic acid) by radical copolymerization under different feed mole ratios and its properties to remove various metal ions, such as Cu(II), Cr(III), Co(II), Zn(II), Ni(II), Pb(II), Cd(II), and Fe(III), in aqueous phase with the liquid‐phase polymer‐based retention(LPR) technique. The interactions of inorganic ions with the hydrophilic water‐soluble polymer were determined as a function of pH and filtration factor. Metal ion retention was found to strongly depend on the pH. Metal ion retention increased as pH and MG content units in the macromolecular backbone increased. The copolymers were characterized by elemental analysis, FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. Additionally, intrinsic viscosity, molecular weight, and polydispersity have been determined for the copolymers. Copolymer and polymer–metal complex thermal behavior was studied using differential scanning calorimetry (DSC) and thermogravimetry (TG) techniques under nitrogen atmosphere. The thermal decomposition temperatures (TDT) were influenced by the copolymer composition. The copolymers present lower TDT than the polymer–metal complex with the same copolymer composition. All copolymers present a single T_g, indicating the formation of random copolymers. A slight deviation of the T_g for the copolymers and its complexes can be observed. The copolymer T_g is higher than the T_g value for the polymer–metal complexes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Separation of metal ions by water‐insoluble polymers containing sulfonic/sulfonate groups

A water‐insoluble polymer, poly(sodium 4‐styrene sulfonate), was synthesized by radical polymerization at different amounts (2, 4, 6, and 8 mol %) of crosslinking reagent (CR). At the lowest CR level (2 mol %), only a water‐soluble polymer is obtained, and consequently it could not be studied as resin. The polymerization yield ranged from 82.6 to 91.6%. The resin is characterized by FTIR spectroscopy, thermal analysis, and scanning electron microscopy. The metal ion affinity is studied for the cations: Hg(II), Cd(II), Zn(II), Pb(II), Cr(III), and Al(III) with a batch equilibrium procedure under different experimental conditions. The metal ion affinity increased as the pH increased. At pH 5, the resin showed an affinity greater than 97% for all metal ions. Hg(II) showed the highest retention value at pH 2. The maximum retention capacity is determined at optimum pH for Hg(II), Cd(II), Pb(II), and Zn(II). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4328–4333, 2006     

Synthesis of functionalized phenolformaldehyde polymer resins by the reaction of 2,4‐dihydroxyacetophenone formaldehyde resin with various amines and their metal ion uptake properties

A series of functionalized phenolformaldehyde polymer resins have been synthesized by the reaction of 2,4‐dihydroxyacetophenone‐formaldehyde resin with the amines, such as ethanolamine, aminophenol, ethylenediamine, and propylenediamine in dichloromethane. The Schiffbase polymers were characterized by IR and ¹H‐NMR spectroscopic techniques. Thermal stabilities of the polymers were determined by TG and DTA studies. Heavy and toxic metal ions viz., Pb(II), Hg(II), Cd(II), and Cr(VI) have been removed using these polymer resins. Metal uptake efficiency, reusability, effect of pH, effect of time, and effect of initial concentration on the metal uptake were also studied. Amount of metal removed by the resin was determined using atomic absorption spectrophotometry. The retention properties were also tested under competitive conditions and were found to be depend strongly on the pH. Elution of metal ions were investigated in acid media. The uptake behaviour of the resins was approximately described by Freundlich's equation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1501–1509, 2004     

Synthesis and properties of hydrophilic polymers. IX. Synthesis,biodegradability, and metal complexation of copolymers of ethylenediaminetetraacetic acid dianhydride and lactose

The synthesis and characterization of poly(ethylenediaminetetraacetic acid‐co‐lactose) with pendant carboxylic groups of high molar mass (132 kg mol^?1) is described. The polycondensate was hydrolytically and microbiologically degradable with conventional microbiological methods. The metal‐complexing properties of the polyester were studied for Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Sr(II), Cd(II), Pb(II), and Al(III) ions in aqueous solution with the liquid‐phase polymer‐based retention (LPR) method. In addition, the complexing capacity of the Cu(II)‐saturated copolymer was determined by thermogravimetric analysis to be 182 mg g^?1 of polymer. According to the retention profiles determined as a function of the filtration factor with LPR in conjunction with inductively coupled plasma spectrometry, Cr(III) and Fe(III) showed a strong interaction with this polymer under these conditions, as indicated by retention values of about 100% at pH 5. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 650–657, 2003     

Metal ion retention properties of water‐insoluble polymers containing carboxylic acid groups

Crosslinked poly(acrylic acid), PAA, and poly(2‐acrylamidoglycolic acid), PAAG, were synthesized by radical polymerization. Both resins contain carboxylic acid groups. PAA at basic pH exists basically as an acrylate anion and PAAG shows three atoms or groups, carboxylic acid, hydroxyl, and amide groups, that can act as ion exchanger or chelating groups. Both resins are studied as adsorbents to trace metal ions from saline aqueous solutions and natural sea water and their properties by Batch equilibrium procedure are compared. The metal ions studied under competitive and noncompetitive conditions were Cu(II), Pb(II), Cd(II), and Ni(II). The effects of pH, time of contact, amount of resin, temperature, and salinity were studied. Resin PAA shows a high affinity (>80%) for Cu(II) and Cd(II) and resin PAAG shows also a high affinity for Ni(II), Pb(II), and Cd(II). By treatment of the metal ion‐loaded resin with 4M HNO₃ it is possible to recover completely the Cu(II) ions from resin PAA and Ni(II) and Pb(II) from resin PAAG. The metal ion retention properties were studied with natural sea water. For those natural sea waters containing Cu(II) and Cd(II), the resins showed a high affinity for Cd(II) ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 697–705, 2006     

Application of a synthetic water-soluble poly(N-maleyl glycine-co-acrylamide) as polychelatogen for inorganic ions in aqueous solutions

Summary The water-soluble poly(N-maleyl glycine-co-acrylamide) (P(MG-co-Am)) reagent with strong complexing properties for the inorganic ions Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), Pb(II), Hg(II), As(V), and Se(IV) was investigated in aqueous phase in conjunction with membrane filtration using the Liquid-phase Polymer-based Retention (LPR) technique. The P(MG-co-Am) was shown to be useful for retention of different inorganic ions and their separation from elements not bound to the polymeric reagent. The inorganic ion interaction with the hydrophilic polymer was determined as a function of pH and filtration factor. At higher pH, the copolymer can be applied to the separation and preconcentration of most of the inorganic ions. Viscosimetric measurements of the copolymers were performed in the presence of metal ions at different pH values. Received: 8 July 1998/Revised version: 23 October 1998/Accepted: 27 October 1998     

Metal ion retention properties of poly(acrylic acid) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid]

The crosslinked resins poly(acrylic acid) (PAA) and poly[N‐3‐(dimethylamino)propyl acrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] are obtained by radical polymerization and characterized by FTIR spectroscopy. PAA at basic pH exists basically as an acrylate anion that may contain end carboxylate groups or form bridges acting as mono‐ or bidentate ligands. P(NDAPA‐co‐AA) presents three potential ligand groups in its structure: carboxylic acid, amide, and amine. The trace metal ion retention properties of these two resins is compared by using the batch equilibrium procedure. The metal ions are contained in saline aqueous solutions and are found in natural seawater. The retention of Cu(II), Pb(II), Cd(II), and Ni(II) metal ions is studied under competitive and noncompetitive conditions. The effects on the pH, contact time, amount of adsorbent, temperature, and salinity are investigated. The PAA resin presents a high affinity (>80%) for Cu(II) and Cd(II) ions. The P(NDAPA‐co‐AA) resin shows a high affinity for Pb(II) and Cd(II) ions. With 4M HNO₃ it is possible to completely recover the PAA resin charged with Cu(II) ions and the P(NDAPA‐co‐AA) resin charged with Pb(II) ions. The two resins show a high affinity for Cd(II) ions from the seawater containing Cu(II) and Cd(II) ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1385–1394, 2005