Copolymerization of styrene with N‐phenyl maleimide in the presence of montmorillonite

The copolymerization of styrene with N‐phenyl maleimide in the presence of organomodified montmorillonite or Na⁺ montmorillonite was investigated. The conversion of the monomer was determined dilatometrically or gravimetrically. The copolymerization rate was accelerated and the polymerization activation energy in bulk and solution copolymerization decreased in the presence of montmorillonite. The tendency of alter‐copolymerization was enhanced for bulk and solution polymerization, but not affected for emulsion polymerization, by the addition of organomodified montmorillonite or Na⁺ montmorillonite. X‐ray diffraction studies showed that the methods of emulsion and bulk intercalative polymerization were more appropriate techniques for preparing nanocomposites with good dispersibility of clay. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1932–1937, 2005     

A Comparative Study of Polystyrene/Layered Silicate Nanocomposites,Synthesized by Emulsion and Bulk Polymerization Methods

Polystyrene/clay (PS/clay) nanocomposites were synthesized by insitu emulsion and bulk polymerization methods. Sodium montmorillonite (Na-MMT) and two organically modified clays (Cloisite 30B and Cloisite 15A) were employed. The effect of clay swelling method and sonication on the d-spacing of silicate layers was also investigated. The surface morphology of pure PS and PS/clay nanocomposites were comparatively investigated using scanning electron microscopy (SEM). Thermogravimetric analysis (TGA) of PS and PS/clay nanocomposites revealed the improved thermal stability of PS/clay nanocomposites compared to pure PS. Results of optical transparency tests showed the better transparency of nanocomposite films compared to the pure PS film.     

Preparation of polystyrene/montmorillonite nanocomposites in supercritical carbon dioxide

The preparation of polystyrene (PS)/montmorillonite (MMT) composites in supercritical carbon dioxide (SC? CO₂) was studied. Lipophilic organically modified MMT can be produced through an ion‐exchange reaction between native hydrophilic MMT and an intercalating agent (alkyl ammonium). PS/clay composites were prepared by free‐radical precipitation polymerization of styrene containing dispersed clay. X‐ray diffraction and transmission electron microscopy indicated that intercalation of MMT was achieved. PS/clay composites have a higher thermal decomposition temperature and lower glass‐transition temperature than pure PS. The IR spectrum analysis showed that the solvent of SC? CO₂ did not change the structures of the PS molecules, but there were some chemical interactions between the PS and the clay in the composites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 22–28, 2005     

Preparation of exfoliated high‐impact polystyrene/MMT nanocomposites via in situ polymerization under controlling viscosity of the reaction medium

Exfoliated high‐impact polystyrene (HIPS)/montmorillonite (MMT) nanocomposites were prepared via in situ polymerization of styrene in the presence of polybutadiene, using an intercalated cationic radical initiator‐MMT hybrid (organoclay). In the solution polymerization in toluene, the silicate layers of the clay were well exfoliated, due to the low extra‐gallery viscosity that can facilitate the diffusion of styrene monomers into the clay layers during the polymerization. The exfoliated HIPS/MMT nanocomposites were also successfully prepared by controlling the viscosity of the reaction medium with prolong swelling of the organoclay in styrene, prior to bulk polymerization. The HIPS/MMT nanocomposites, obtained from bulk polymerization, exhibited a significant improvement in thermal stability, compared to those obtained from solution polymerization as well as the pure polymer counterparts. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers     

Synthesis and characterization of poly(glycidyl methacrylate)/Na‐montmorillonite nanocomposites

Poly(glycidyl methacrylate)/Na–montmorillonite nanocomposites were synthesized by free‐radical polymerization of glycidyl methacrylate containing dispersed montmorillonite. By changing the concentration of glycidyl methacrylate several polymer–clay nanocomposites were prepared and the resulting nanocomposites were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The results indicated that the properties of the composite were significantly improved. The thermogravimetric analysis results revealed that the degradation temperatures of nanocomposites were higher than that of pure polymer and the thermal degradation rates decreased. Examination of these materials by scanning electron microscopy showed that the clay layers are dispersed homogenously in the polymer matrix and the formation of intercalation nanostructure. Furthermore, adsorptive, moisture regain, and water uptake properties of nanocomposites were also investigated. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1532–1538, 2004     

Synthesis and characteristics of polystyrene–clay nanocomposites via in situ intercalative polymerization in a direct current electric field

Polystyrene (PS)/montmorillonite nanocomposites were prepared by the free‐radical polymerization of styrene‐containing dispersed clay in a direct current electric field. The intercalation spacing in the nanocomposites, the dispersion, and the orientation of these composites were investigated. The nanocomposites had higher T_g and better thermal stability when compared with the virgin PS. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of nanoclay‐dispersed polystyrene nanofibers via atom transfer radical polymerization and electrospinning

In this study, clay‐dispersed polystyrene (PS) nanocomposites were prepared with the in situ atom transfer radical polymerization method and were subsequently electrospun to form nanofibers 450–650 nm in diameter. The polymer chains extracted from the clay‐dispersed nanofibers exhibited a narrow range of molecular weight distribution. Thermogravimetric analysis (TGA) confirmed a higher thermal stability of the resulting nanocomposites compared to PS. The effect of the weight ratio of montmorillonite on the thermal properties of the nanocomposites was also studied by TGA. Differential scanning calorimetry revealed that the addition of the nanoclay increased the glass‐transition temperature. Moreover, degradation of the bromide chain‐end functionality took place at low temperatures. Scanning electron microscopy showed that the average diameter of the fibers was around 500 nm. The dispersion of clay layers was also evaluated by Al atoms in the PS matrix with the energy‐dispersive X‐ray detection technique. Transmission electron microscopy confirmed the exfoliation of the nanoclay within the matrix. However, the clay layers were oriented along the nanofiber axis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effective enhancement of anticorrosive properties of polystyrene by polystyrene–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of polystyrene (PS) and layered montmorillonite (MMT) clay was prepared by effectively dispersing the inorganic nanolayers of MMT clay in the organic PS matrix via in situ thermal polymerization. Organic styrene monomers were first intercalated into the interlayer regions of organophilic clay hosts, followed by a typical free radical polymerization with BPO as the initiator. The as‐synthesized PCN materials were characterized by infrared spectroscopy (IR), wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in anticorrosion to those of bulk PS, based on a series of electrochemical measurements of corrosion potential, polarization resistance and corrosion current in a 5 wt % aqueous NaCl electrolyte. The molecular weights of PS extracted from PCN materials and bulk PS were determined by gel permeation chromatography (GPC) with tetrahydrofuran (THF) as the eluent. The effects of material composition on molecular barrier and thermal stability of PS and PCN materials, in the form of both free‐standing films and fine powders, were also studied by molecular permeability analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1970–1976, 2004     

Polystyrene–organoclay nanocomposites prepared by melt intercalation,in situ,and masterbatch methods

In this study, polystyrene (PS)/montmorillonite nanocomposites were prepared by melt intercalation, in situ polymerization, and masterbatch methods. In the masterbatch method, as the first step, a high clay content composite of PS–organoclay (masterbatch) was prepared by in situ polymerization, and then the prepared masterbatch was diluted to desired compositions with commercial PS in a twin‐screw extruder. The structure and mechanical properties of the nanocomposites were examined. X‐ray diffraction (XRD) analysis showed that the d‐spacing of the in situ formed nanocomposites increased from 32.9 Å for the organoclay powder to 36.3 and 36.8 Å respectively in nanocomposites containing 0.73 and 1.6 wt% organoclay, indicating intercalation. However, the d‐spacing of the other prepared materials remained nearly unchanged when compared with pure organoclay powder. Thus, at these low clay contents, in situ formed nanocomposites showed the best improvement in mechanical properties including tensile, impact strength, and Young's modulus. In situ polymerization method did not prove to be efficient at high clay loadings in terms of intercalation and mechanical properties. At high clay loadings, the effects of the three methods in promoting mechanical properties were not significantly different from each other. POLYM. COMPOS., 27:249–255, 2006. © 2006 Society of Plastics Engineers     

Enhanced thermal properties of PS nanocomposites formed from inorganic POSS-treated montmorillonite

We have prepared polystyrene/clay nanocomposites using an emulsion polymerization technique. The nanocomposites were exfoliated at up to a 3 wt% content of pristine clay relative to the amount of polystyrene (PS). We used two different surfactants for the montmorillonite: the aminopropylisobutyl polyhedral oligomeric silsesquioxane (POSS) and the ammonium salt of cetylpyridinium chloride (CPC). Both surfactants can intercalate into the layers of the pristine clay dispersed in water prior to polymerization. Although the d spacing of the POSS-intercalated clay is relatively smaller than that of the CPC-intercalated clay, PS more easily intercalates and exfoliates the POSS-treated clay than the CPC-treated clay. IR spectroscopic analysis further confirms the intercalation of POSS within the clay layers. We used X-ray diffraction (XRD) and transmission electron microscopy (TEM) to characterize the structures of the nanocomposites. The nanocomposite prepared from the clay treated with the POSS containing surfactant is exfoliated, while an intercalated clay was obtained from the CPC-treated surfactant. The molecular weights of polystyrene (PS) obtained from the nanocomposite is slightly lower than the virgin PS formed under similar polymerization conditions. The value of T_g of the PS component in the nanocomposite is 8 °C higher than the virgin PS and its thermal decomposition temperature (21 °C) is also higher significantly. The presence of the POSS unit in the MMT enhances the thermal stability of the polystyrene.     

Synthesis and properties of polystyrene–clay nanocomposites via in situ intercalative polymerization

Organophilic montmorillonite (MMT) was prepared by ion exchange between Na⁺ ions in the clay and twin benzyldimethyloctadecylammonium bromine cations in an aqueous medium. The organophilic MMT particles were easily dispersed and swollen in styrene monomer. Polystyrene–MMT nanocomposites were prepared by the free‐radical polymerization of styrene containing dispersed clay. The intercalation spacing in the nanocomposites and the degree of dispersion of these composites were investigated with X‐ray diffraction and transmission electron microscopy, respectively. The nanocomposites had higher weight‐average molecular weights, lower glass‐transition temperatures, and better thermal stability (the decomposition temperature was improved by ca. 70°C) than the virgin polystyrene. The rheological behavior of the polystyrene–MMT nanocomposites was also studied. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 201–207, 2005     

Polystyrene nanocomposite materials by in situ polymerization into montmorillonite–vinyl monomer interlayers

A different series of new polystyrene–clay nanocomposites have been prepared by grafting polymerization of styrene with vinyl‐montmorillonite (MMT) clay. The synthesis was achieved through two steps. The first step is the modification of clay with the vinyl monomers, such as N,N‐dimethyl‐n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, triphenyl‐4‐vinylbenzyl‐phosphonium chloride, and tri‐n‐butyl‐4‐vinylbenzyl‐phosphonium chloride. The second step is the polymerization of styrene with different ratios of vinyl‐MMT clay. The materials produced were characterized by different physical and chemical methods: (1) IR spectra, confirming the intercalation of the vinyl‐cation within the clay interlayers; (2) thermogravimetric analysis (TGA), showing higher thermal stability for PS–nanocomposites than polystyrene (PS) and higher thermal stability of nanocomposites with of phosphonium moieties than nanocomposites with ammonium moieties; (3) swelling measurements in different organic solvents, showing that the swelling degree in hydrophobic solvents increases as the clay ratio decreases; (4) X‐ray diffraction (XRD), illustrating that the nanocomposites were exfoliated at up to a 25 wt % of organoclay content; and (5) scanning electron microscopy (SEM), showing a complete dispersion of PS into clay galleries. Also, transmission electron microscopy (TEM) showed nanosize spherical particles of ～ 150–400 nm appearing in the images. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3739–3750, 2007     

Tentative study on kinetics of bulk polymerization of methyl methacrylate in presence of montmorillonite

The kinetics of the bulk polymerization of methyl methacrylate (MMA) in the presence of montmorillonite (MMT) were studied. The effect of MMT on the radical polymerization of MMA was researched by determining the polymerization rate dilatometrically. It was assumed that there were both bimolecular and monomolecular termination processes involved in the termination of the radicals in the polymerization. It was found that a lower benzoyl peroxide (BPO) concentration promotes a higher fraction of monomolecular mode in chain termination. The results show that there is an optimal ratio of MMT to initiator that increases the bulk polymerization rate of MMA. The X‐ray results show that the layer structure of the formed PMMA–MMT composites was also affected by the BPO concentration. With lower initiator concentration, less pronounced layer structure will be observed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3690–3695, 2003     

Preparation of polystyrene–clay nanocomposites via dispersion polymerization using oligomeric styrene‐montmorillonite as stabilizer

This study describes the preparation of polystyrene–clay nanocomposite (PS‐nanocomposite) colloidal particles via free‐radical polymerization in dispersion. Montmorillonite clay (MMT) was pre‐modified using different concentrations of cationic styrene oligomeric (‘PS‐cationic’), and the subsequent modified PS‐MMT was used as stabilizer in the dispersion polymerization of styrene. The main objective of this study was to use the clay platelets as fillers to improve the thermal and mechanical properties of the final PS‐nanocomposites and as steric stabilizers in dispersion polymerization after modification with PS‐cationic. The correlation between the degree of clay modification and the morphology of the colloidal PS particles was investigated. The clay platelets were found to be encapsulated inside PS latex only when the clay surface was rendered highly hydrophobic, and stable polymer latex was obtained. The morphology of PS‐nanocomposite material (after film formation) was found to range from partially exfoliated to intercalated structure depending on the percentage of PS‐MMT loading. The impact of the modified clay loading on the monomer conversion, the polymer molecular weight, the thermal stability and the thermomechanical properties of the final PS‐nanocomposites was determined. Copyright © 2012 Society of Chemical Industry     

Preparation of syndiotactic polystyrene/montmorillonite nanocomposites via in situ intercalative polymerization of styrene with monotitanocene catalyst

Syndiotactic polystyrene (sPS)/montmorillonite nanocomposites were prepared via in situ intercalative coordination polymerization using mono‐(η⁵‐pentamethylcyclopenta‐ dienyl) tribenzyloxy titanium [Cp*Ti(OBz)₃] complex activated by methylaluminoxanes (MAO) and triisobutylaluminum (TIBA). The influences of polymerization conditions, such as the weight ratio of montmorillonite and styrene, temperature, and monomer concentration, on the preparation of sPS/montmorillonite nanocomposites was investigated. The intercalation spacing in the nanocomposites, as well as the exfoliation of the montmorillonite interlayers, was characterized with wide angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM). The dispersibility of the nanoscale elements depended on the polymerization conditions and the surfactant treatment. The crystallizability and thermal properties of these nanocomposites were determined by differential scanning calorimetry (DSC) analysis and thermogravimetric analysis (TGA). Experimental results indicated that the degree of crystallinity of the sPS nanocomposite increased with increasing montmorillonite content and with higher T_g and thermal decomposition temperature than pure sPS. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1412–1417, 2005     

Preparation and rheological characterization of intercalated polystyrene/organophilic montmorillonite nanocomposite

Polystyrene (PS)/organophilic montmorillonite (OMMT) clay nanocomposites were prepared by a solvent casting method using chloroform as a cosolvent. Intercalation of the OMMT in the PS matrix was achieved as revealed by X‐ray diffraction. The IR spectra of the products indicated that the OMMT is homogeneously dispersed in the PS matrix. A thermogravimetric analysis (TGA) showed that the onset temperature increases linearly with the clay content. The glass‐transition temperature of the PS, examined using differential scanning calorimetry, had a trend similar to that from the TGA. The rheological properties of the PS/OMMT nanocomposites were also investigated via a rotational rheometer with a parallel plate geometry, and they exhibited sharper shear thinning and increased storage and loss modulus with clay content. Furthermore, the shear viscosity obtained from the steady shear experiment was well correlated with the complex viscosity obtained from the oscillatory experiment via the Cox and Merz relation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2106–2112, 2003     

Intercalated PS/Na+‐MMT Nanocomposites Prepared by Ultrasonically Initiated In Situ Emulsion Polymerization

Summary: A new technique, ultrasonically initiated in situ emulsion polymerization, was employed to prepare intercalated polystyrene/Na⁺‐MMT nanocomposites. FTIR, XRD, and TEM results confirm that the hydrophobic PS can easily intercalate into the galleries of hydrophilic montmorillonite via ultrasonically initiated in situ emulsion polymerization, taking advantages of the multi‐effects of ultrasonic irradiation, such as dispersion, pulverization, activation, and initiation. Properly reducing SDS concentration is beneficial to widen the d‐spacing between clay layers. However, the Na⁺‐MMT amount has little effect on the d‐spacing of nanocomposites. The glass transition temperature of nanocomposites increased as the percentage of clay increased, although the average molecular weight of PS decreased, and the decomposition temperature of the 1obtained nanocomposites moves to higher temperature.

TEM of PS/Na⁺‐MMT nanocomposite prepared by ultrasonically initiated in situ emulsion polymerization.     

Polymorphic behavior of nylon 6/saponite and nylon 6/montmorillonite nanocomposites

X‐ray diffraction methods and DSC thermal analysis have been used to investigate the structural change of nylon 6/clay nanocomposites. Nylon 6/clay has prepared by the intercalation of ε‐caprolactam and then exfoliaton of the layered saponite or montmorillonite by subsequent polymerization. Both X‐ray diffraction data and DSC results indicate the presence of polymorphism in nylon 6 and in nylon 6/clay nanocomposites. This polymorphic behavior is dependent on the cooling rate of nylon 6/clay nanocomposites from melt and the content of saponite or montmorillonite in nylon 6/clay nanocomposites. The quenching from the melt induces the crystallization into the γ crystalline form. The addition of clay increases the crystallization rate of the α crystalline form at lower saponite content and promotes the heterophase nucleation of γ crystalline form at higher saponite or montmorillonite content. The effect of thermal treatment on the crystalline structure of nylon 6/clay nanocomposites in the range between Tg and Tm is also discussed.     

Synthesis and thermal properties of polystyrene/montmorillonite nanocomposites by γ‐ray radiation polymerization

Polystyrene/montmorillonite nanocomposites were prepared by γ‐ray radiation polymerization. X‐ray diffraction and high‐resolution transmission electron microscopy confirmed that polystyrene (PS) could be easily inserted between the sheets of montmorillonite (MMT) to form intercalated nanocomposites. In these PS/MMT nanocomposites, the distance between the sheets of MMT was barely influenced by varying the content of the MMT. Thermal stabilities of the samples were studied by thermal gravimetric analysis and differential scanning calorimetry. The glass‐transition temperature of PS/MMT nanocomposites was obviously higher than that of the pure PS. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1692–1696, 2003     

Preparation of reactive mineral powders used for poly(sodium acrylate) composite superabsorbents

Reactive mineral powders were prepared with a vinyl monomer as an intercalating agent, which was grafted onto the surface of nanoclay layers, to offer crosslinking points between the nanoclay layers. According to IR characterization, the vinyl group of (3‐acrylamidopropyl)trimethylammonium chloride, grafted onto the clay, disappeared after polymerization was performed. This spectral evidence confirmed that the reaction occurred between the clay layers. Thermogravimetric curves showed that the weight percentage remaining at 750°C for the intercalated clay/sodium acrylate nanocomposites was about 5 wt % higher than that for organic poly(sodium acrylate). This indicated that the clay was not diminished in the polymerization, and this process produced intercalated mica with a quaternary ammonium content of approximately 38.8 mmol/100 g and intercalated montmorillonite with a quaternary ammonium content of approximately 45.36 mmol/100 g. We also investigated the effect of reactive clays on the crystalline morphology and water absorbency for these nanocomposite hydrogels. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 855–861, 2005