Reentrant phase transition of poly(N‐isopropylacrylamide) gels in polymer solutions: Thermodynamic analysis

The swelling behavior of poly(N‐isopropylacrylamide) (PNIPA) gels in polymer solutions, particularly in aqueous solutions of poly(ethylene glycol)s, was investigated using the theory of equilibrium swelling. The volume of the PNIPA gel and the partition parameter of the macromolecules between the gel and the solution phases were calculated for various extents of the energetic interactions between the components. The simulation results were compared with the experimental data reported in the literature. It was shown that the PNIPA gel has a tendency to a reentrant phase transition in an aqueous solution of low molecular weight linear polymers. In such a transition, the gel first collapses, then reswells, if the linear polymer concentration is continuously varied. The necessary condition for the reentrant behavior of PNIPA gels was predicted in terms of the interaction parameters among the PNIPA network, the linear polymer, and water. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 801– 813, 2002     

Swelling–shrinking hysteresis of poly(N‐isopropylacrylamide) gels in sodium dodecylbenzenesulfonate solutions

The swelling and shrinking behaviors of a series of poly(N‐isopropylacrylamide) (PNIPA) hydrogels are studied in aqueous solutions of sodium dodecylbenzenesulfonate (SDBS). Between 0 and 3 mol % 2‐acrylamido‐2‐methylpropanesulfonic acid sodium salt (AMPS) is used as an ionic comonomer in the hydrogel synthesis. It is shown that the collapsed PNIPA gels in water at 52°C start to swell above a critical SDBS concentration in the external solution. This critical concentration decreases as the ionic group content of PNIPA gel increases. A comparison of the swelling and shrinking experiments in SDBS solutions indicates strong hysteresis behavior of PNIPA gels. A more diluted solution is required to make a swollen gel start to reshrink than to cause gel swelling. The results show strong attractive forces between the isopropyl groups of the PNIPA network and the DB groups of SDBS molecules. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1228–1232, 2002     

Swelling–deswelling kinetics of poly(N‐isopropylacrylamide) hydrogels formed in PEG solutions

A series of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was prepared by free‐radical crosslinking copolymerization of N‐isopropylacrylamide (NIPA) and N,N′‐methylenebisacrylamide (BAAm) in aqueous solutions of poly(ethylene glycol) of molecular weight 300 g/mol (PEG). The amount of PEG in the polymerization solvent, the crosslinker (BAAm) content, and the gel preparation temperature (T_prep) were varied in the gelation experiments. The hydrogels were characterized by the equilibrium swelling and elasticity tests as well as by the measurements of the deswelling–reswelling kinetics of the hydrogels in response to a temperature change between 25 and 48°C. The rate of deswelling of the swollen gel increases while the rate of reswelling of the collapsed gel decreases as the amount of PEG in the polymerization solvent is increased or as the crosslinker content is decreased. The T_prep effect on the swelling kinetics of the hydrogels was only observed if the PEG content of the polymerization solvent is less than 20%, which is explained with the screening of H‐bonding interactions in concentrated PEG solution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 37–44, 2006     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Swelling behavior of thermoreversible poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels

Thermoresponsive hydrogels based on N‐isopropylacrylamide and N‐vinylimidazole were synthesized, and their swelling–deswelling behavior was studied as a function of the total monomer concentration. For copolymeric structures with better thermoresponsive properties with respect to poly(N‐isopropylacrylamide‐co‐N‐vinylimidazole) hydrogels, these hydrogels were protonated with HCl and HNO₃, and the copolymer behaviors were compared with those of the unprotonated hydrogels. The temperature was changed from 4 to 70°C at fixed pHs and total ionic strengths. The equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all the hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1619–1624, 2004     

Thermodynamic study of a pressure‐temperature phase diagram for poly(N‐isopropylacrylamide) gels

The volume change, ΔV_h,_, accompanying the hydrophobic hydration associated with the volume phase transition in Poly(N‐isopropylacrylamide) gels was measured by a simple method. The hydration accompanies a negative ΔV_h′?2.5 cm³/mol. The P‐T phase diagram, the coexistence curve, for the gels was determined from the swelling ratio‐pressure curves up to 350 MPa for various constant temperatures. The contour of the coexistence curve is shaped like an ellipsoid on the P‐T plain, which is a feature peculiar to the reversible pressure‐temperature denaturation of a protein. The thermodynamic analysis of the Clausius–Clapeyron relation for the measured ΔV_h elucidates that the obtained coexistence curve represents the phase boundary between thermodynamic different phases like the two phases, native and denatured, of a protein and gives the transition enthalpy, ΔH, 5.2kJ/mol by estimate, which well coincides with the transition heat measured by a calorimetric method. Considering the volume‐dependent free energy, Δv_mi · P, for the mixing free energy of the gel, we can fit the calculated curve to the measured swelling ratio‐pressure curve of PNIPA gels. The value of Δv_mi changes the sign from negative to positive above around 100MPa. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 405–412, 2005     

Electroactive characteristics of interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

An interpenetrating polymer network (IPN) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by the sequential IPN method. The equilibrium swelling ratio and bending behavior under electric fields of the IPN hydrogel were measured in an aqueous NaCl solution. The IPN exhibited a high equilibrium swelling ratio, in the range 280–380%. When the IPN in aqueous NaCl solution was subjected to an electric field, the IPN showed significant and quick bending toward the cathode. The IPN hydrogel also showed stepwise bending behavior, depending on the electric stimulus. In addition, the ionic conductivity of the IPN hydrogel was measured using dielectric analysis, and its conductive behavior followed the Arrhenius equation. The conductivity of the IPN hydrogel and the activation energy for the form of the IPN were 1.68 × 10^?5 S/cm at 36°C and 61.0 kJ/mol, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 890–894, 2003     

Synthesis,characterization, and swelling responses of poly(N‐isopropylacrylamide)‐ and hydroxypropyl cellulose‐based environmentally sensitive biphasic hydrogels

Thermosensitive networks based on hydroxypropyl cellulose and N‐isopropylacrylamide crosslinked with N,N‐methylene bisacrylamide were synthesized by a simultaneous gamma radiation technique. The network yield was optimized by the variation of reaction parameters such as the total radiation dose, concentration of crosslinker and monomer, and amount of water. The hydrogels had a biphasic structure and good mechanical strength, even in the fully swollen state, and could be synthesized in any shape and size. Volume transitions as a function of time and temperature were studied for these hydrogels in water, and the effects on swelling in different media such as 0.5N NaOH, 0.5N HCl, and 5% NaCl at the optimum time and temperature were also studied. The response of the hydrogels to these diverse changes in the swelling media was observed, and the volume transitions due to environmental changes in the hydrogels were not sharp and discontinuous as a maximum volume collapse occurred at a temperature higher than the reported lower critical solution temperature of 32.5°C for N‐isopropylacrylamide. These hydrogels were environmentally sensitive and responded to changes in their thermal and ionic environment and have potential applications in diverse fields such as drug delivery, enzyme technology, and environmental management. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 479–488, 2004     

Real‐time temperature and photon transmission measurements for monitoring phase separation during the formation of poly(N‐isopropylacrylamide) gels

Phase separation during the formation of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was investigated using real‐time photon transmission and temperature measurements. The hydrogels were prepared by free‐radical crosslinking polymerization of N‐isopropylacrylamide (NIPA) in the presence of N,N′‐methylenebisacrylamide (BAAm) as a crosslinker in an aqueous solution. The onset reaction temperature T₀ was varied between 20 and 28°C. Following an induction period, all the gelation experiments resulted in exothermic reaction profiles. A temperature increase of 6.5 ± 0.6°C was observed in the experiments. It was shown that the temperature increase during the formation and growth process of PNIPA gels is accompanied by a simultaneous decrease in the transmitted light intensities I_tr. The decrease in I_tr at temperatures below the lower critical solution temperature of PNIPA was explained by the concentration fluctuations due to the inhomogeneity in the gel network. At higher temperatures, it was shown that the gel system undergoes a phase transition via a spinodal decomposition process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3589–3595, 2002     

Temperature/pH‐sensitive comb‐type graft hydrogels composed of chitosan and poly(N‐isopropylacrylamide)

Comb‐type graft hydrogels, composed of chitosan and poly(N‐isopropylacrylamide) (PNIPAAm), were prepared to manifest rapid temperature and pH sensitivity. Instead of directly grafting the NIPAAm monomer onto the chitosan chain, semitelechelic PNIPAAm with carboxyl end group was synthesized by radical polymerization using 3‐mercaptopropionic acid as the chain‐transfer agent, and was grafted onto chitosan having amino groups. The comb‐type hydrogels were prepared with two different graft yields and grafting regions, such as surface‐ and bulk‐grafting, and then compared with a chitosan hydrogel. The synthesis of telechelic PNIPAAm and the formation of amide group were confirmed by using FTIR spectroscopy and gel permeation chromatography. Results from the water state and thermal stability revealed that the introduction of the PNIPAAm side chain disturbed the ordered arrangement of the chitosan molecule, resulting in an increase in the equilibrium water content. Comb‐type graft hydrogels showed rapid temperature and pH sensitivity because of the free‐ended PNIPAAm attached to the chitosan main chain and the chitosan amino group itself, respectively. In particular, the surface graft hydrogel maintained its dimension at low pH, although the chitosan main chain was not crosslinked, whereas chitosan and bulk graft hydrogel were dissolved as a result of the coating effect of pH‐independent PNIPAAm. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2612–2620, 2004     

Preparation and characterization of thermosensitive poly(N‐isopropylacrylamide)/poly(ethylene oxide) semi‐interpenetrating polymer networks

Temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels were successfully synthesized by using poly(ethylene oxide) as the interpenetrating agent. The newly prepared semi‐interpenetrating polymer network (semi‐IPN) hydrogels exhibited much better properties as temperature‐sensitive polymers than they did in the past. Characterizations of the IPN hydrogels were investigated using a swelling experiment, FTIR spectroscopy, and differential scanning calorimetry (DSC). Semi‐IPN hydrogels exhibited a relatively high temperature dependent swelling ratio in the range of 23–28 at room temperature. DSC was used for the determination of the lower critical solution temperature of the semi‐IPN hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3032–3036, 2003     

Effect of gelatin on the swelling behavior of organic hybrid gels based on N‐isopropylacrylamide and gelatin

Organic hybrid gels based on poly(N‐isopropylacrylamide) and a natural polymer, gelatin, were prepared through two‐step crosslinking with genipin or glutaraldehyde. The effects of the gelatin content on the swelling behaviors and physical properties of these hybrid gels were investigated. The results indicated that the swelling ratio decreased with an increase in the content of gelatin in these hybrid gels. The swelling ratio for the gel crosslinked by genipin was significantly smaller than that for the gel crosslinked by glutaraldehyde. The results also showed that the gel crosslinked with genipin had a higher crosslinking density and a higher gel strength. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1092–1099, 2005     

Thermal phase transition of poly(N‐propionylethyleneimine) hydrogel

This article presents the preparation of the hydrogel of poly(N‐propionylethyleneimine) and its interpenetrating polymer network (IPN) hydrogel containing polyacrylamide by means of γ‐ray radiation and a study of the phase transition temperature of these hydrogels. As a result, the hydrogel of the crosslinked poly(N‐propionylethyleneimine) exhibited swelling below and shrinking above the phase transition temperature (about 61°C), as well as the lower critical solution temperature (LCST) of the liner polymer–water system. The experiment also showed that the LCST of the IPN hydrogel could be adjusted by the incorporation of the second component polyacrylamide. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2457–2461, 1999     

Development and characterization of thermosensitive hydrogels based on poly(N‐isopropylacrylamide) and calcium alginate

This work refers to the synthesis and characterization of thermosensitive hydrogels based on interpenetrating polymer networks (IPNs) of poly(N‐isopropylacrylamide) (PNIPAAm) and calcium alginate in the form of films. The influence of the crosslinking degree of PNIPAAm and alginate content on thermal, swelling, mechanical, and morphological properties of hydrogels is investigated in detail. Characterization of pure PNIPAAm hydrogels and IPN hydrogels was performed by FTIR, DSC, DMA, and SEM. In addition, the studies of equilibrium swelling behavior as well as swelling, deswelling, and reswelling kinetics are performed. The results obtained imply the benefits of synthesizing IPNs based on PNIPAAm and calcium alginate over pure PNIPAAm hydrogels. The presence of calcium alginate contributes to the improvement of mechanical properties, the deswelling rate of hydrogels, and the network porosity, without altering the thermosensitivity of PNIPAAm significantly. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and swelling characterization of poly (n‐isopropylacrylamide)‐based porous hydrogels

Nine different poly(n‐isopropylacrylamide)‐based hydrogels, including nonionic, cationic, and anionic hydrogels, were synthesized in with and without the addition of pore‐forming agents. The synthesized hydrogels were characterized with dry gel density measurements, scanning electron microscopy observations, and the determination of the swelling ratio swelling kinetics. All the results showed that the cationic hydrogels had faster swelling kinetics than the anionic and nonionic hydrogels. The addition of pore‐forming agents (NaHCO₃ and carboxymethylcellulose) during the synthesis process led to porous hydrogels with lower dry densities, swelling ratios, and swelling kinetic parameter values. An empirical equation was developed to successfully correlate the swelling kinetic parameter with the hydrogel swelling ratio. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3651–3658, 2004     

Swelling behaviors of ionic poly(N,N‐dimethylacrylamide‐co‐acrylamide) hydrogels in various media

Polyelectrolyte hydrogels were synthesized from N,N‐dimethylacrylamide, acrylamide, and itaconic acid with ammonium persulfate as a free‐radical initiator in the presence of methylene(bis)acrylamide as a crosslinker. The swelling behavior of the ionic poly(N,N‐dimethylacrylamide‐co‐acrylamide) hydrogels was investigated in pure water, in KSCN solutions with pHs 4 and 9, and in water–acetone mixtures according to the itaconic acid content in the hydrogel. The pulsatile swelling behavior of these hydrogels was studied both in water–acetone and in pH 2–9 buffer solutions. Although the equilibrium swelling ratio of the hydrogels with low concentrations of itaconic acid was almost not affected by changes in the temperature, the equilibrium swelling ratio of the hydrogels with high concentrations of itaconic acid increased in the temperature range of 20–50°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2140–2145, 2007     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Semi‐interpenetrating networks based on poly(N‐isopropyl acrylamide) and poly(N‐vinylpyrrolidone)

Three series of novel semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropylacrylamide), PNIPA, and different amounts of the linear poly(N‐vinylpyrrolidone), PVP, were synthesized to improve the mechanical properties and thermal response of PNIPA gels. The effect of the incorporation of the linear PVP into the temperature responsive networks on the temperature‐induced transition, swelling/deswelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with varying molar ratios (25/1 to 100/1) of the monomer (N‐isopropylacrylamide) to the crosslinker (N,N′‐methylenebisacrylamide). The hydrogels were characterized by determination of the equilibrium degree of swelling, the dynamic shear modulus and the effective crosslinking density, as well as tensile strength and elongation at break. Furthermore, the deswelling kinetics of the hydrogels was studied by measuring their water retention capacity. The inclusion of the linear hydrophilic PVP in the PNIPA networks increased the equilibrium degree of swelling. The tensile strength of the semi‐interpenetrating networks (SIPNs) reinforced with linear PVP was higher than that of the PNIPA networks. The elongation at break of these SIPNs varied between 22% and 55%, which are 22 – 41% larger than those for pure PNIPA networks. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Phase separation of poly(N‐isopropylacrylamide) solutions and gels using a near infrared fiber laser

We used a tunable near infrared fiber laser in the wavelength range of 1533–1573 nm to induce photothermal phase changes in poly(N‐isopropylacrylamide) (PNIPAM) aqueous solutions and hydrogels. The laser induces the hydrophilic to hydrophobic transition of the polymer by heating the surrounding water. We report our observations of the phase changes based on using a novel fiber backreflectance method coupled with visual cloud point measurements. At 1533 nm the phase transition was induced at the end of a single mode optical fiber with 9 mW of power at an ambient temperature of 24°C. We found that the power required to reach the lower critical solution temperature was inversely proportional to the absorption spectrum of water. In addition, phase changes in both solutions and gels occurred very rapidly (<1 s) as the laser was turned on and off. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Temperature‐sensitive switch from composite poly(N‐isopropylacrylamide) sponge gels

Thermally sensitive polymers change their properties with a change in environmental temperature in a predictable and pronounced way. These changes can be expected in drug delivery systems, solute separation, enzyme immobilization, energy‐transducer processes, and photosensitive materials. We have demonstrated a thermal‐sensitive switch module, which is capable of converting thermal into mechanical energy. We employed this module in the control of liquid transfer. The thermally sensitive switch was prepared by crosslinking poly(N‐isopropylacrylamide) (PNIPAAm) gel inside the pores of a sponge to generate the composite PNIPAAm/sponge gel. This gel, contained in a polypropylene tube, was inserted into a thermoelectric module equipped with a fine temperature controller. As the water flux through the composite gel changes from 0 to 6.6 × 10² L m⁻² h, with a temperature change from 23 to 40°C, we can reversibly turn on and off the thermally sensitive switch. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75:1735–1739, 2000