Synthesis,characterization, and properties for Hg2+ of new chelating resin containing sulfoxide and 3‐aminopyridine

A new chelating resin (PVESO‐AP) containing sulfoxide and 3‐aminopyridine (AP) was synthesized by using chloromethylated polystyrene‐co‐divinylbenzene (PS‐Cl) as material. Its structure was characterized by infrared spectra and elemental analysis. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Ni²⁺ were determined at pH 2 and 5. In addition, the adsorption selective coefficients for Hg²⁺ in several binary mixture systems were investigated by batch experiment method. The results showed that this resin had high adsorption selectivity for Hg²⁺. The adsorption kinetics and isothermal of PVESO‐AP for Hg²⁺ at different temperatures were also investigated. The adsorption kinetics showed that the apparent activation energy E_a was 13.71 kJ/mol. The results also showed that the Langmuir model was better than the Frundlich model to describe the isothermal process of PVESO‐AP resin for Hg²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and adsorption properties of macroporous cross‐linked polystyrene that contains an immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole with tetraethylene glycol spacers

A novel chelating resin macroporous cross‐linked polystyrene immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole via a hydrophilic tetraethylene glycol spacer (PS‐TEG‐BMT) is synthesized and the structure is characterized by means of Fourier transform infrared spectroscopy (FTIR), energy dispersive X‐ray microanalysis (EDX), and elementary analysis. Its adsorption capacity for several metal ions such as Hg²⁺, Ag⁺, Ni²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Bi³⁺, Zn²⁺, and Cu²⁺ are investigated. The initial experimental result shows that this resin has higher adsorption selectivity for Hg²⁺ and Ni²⁺ than for the other metal ions and the introduction of hydrophilic TEG spacer is beneficial to increase adsorption capacities. The result also shows that the Langmuir model is better than the Freundlich model to describe the isothermal process of PS‐TEG‐BME resin for Hg²⁺. Five adsorption‐desorption cycles demonstrate that this resin are suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 45:1515–1521, 2005. © 2005 Society of Plastics Engineers     

Preparation of crosslinked poly(styrene–g–N-carboxyalkylated ethylenimine) as chelating resin

Carboxymethyl and ethyl groups were introduced into crosslinked poly(styrene–g–ethylenimine) (PSt–g–EI), consisting of a crosslinked polystyrene backbone with linear polyethylenimine branches, by the reaction of PSt–g–EI with monochloroacetic acid and β-chloropropionic acid. Carboxyethylation was also performed by reaction of the PSt–g–EI with acrylic acid. The extent of the reaction was determined by the change in the nitrogen content of the resin. The adsorption of metal ions such as Cu²⁺, Cd²⁺, Hg²⁺, Ni²⁺, and Ca²⁺ by carboxyalkylated PSt–g–EI was examined. With the introduction of carboxyalkyl groups, the adsorption capacity for metal ions (per gram of resin) decreased, whereas the affinity of the resin for these ions increased.     

Preparation of a New Polystyrene Supported-Ethylenediaminediacetic Acid Resin and its Sorption Behavior toward Divalent Metal Ions

A new polystyrene-supported ethylenediaminediacetic acid resin has been synthesized through a reaction between the amination of the commercially available 4-chloromethyl polystyrene polymer with ethylenediamine and the subsequent carboxymethylation with monobromoacetic acid, using ethylenediamine as spacer. The chelation behavior of this resin toward the divalent metal ions Cu²⁺, Ni²⁺, Zn²⁺, and Pb²⁺ in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, and polymer mass. The amount of metal-ion uptake of the polymer was determined by using atomic absorption spectrometry (AAS). Results of the investigation revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu²⁺ and that the metal-ion uptake follows the order: Cu²⁺ > Zn²⁺ > Ni²⁺ > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Preparation and adsorption selectivity for Hg(II) and Ag(I) of chelating resin immobilizing benzothiazolyl group on crosslinked polystyrene via hydrophilic sulfur‐containing PEG spacer

A new chelating resin incorporating 2‐mercaptobenzothiazole (MBZ) into macroporous chloromethylated polystyrene via hydrophilic spacer of polyethylene glycol containing sulfur was synthesized. The resin was characterized by elementary analysis and infrared spectra. The adsorption capacity of the resin for Ag⁺, Hg²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ as a function of pH was determined. The effects of interference ions, such as Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺, on percent recovery were also investigated. The results showed that the resin could effectively remove Hg²⁺ and Ag⁺ from solutions containing a large excess of Na⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. In column operation, it was observed that Hg²⁺ and Ag⁺ in trace quantities were effectively removed from binary metal ions. The percent recovery of the resin for Hg²⁺ and Ag⁺ was >98.6% and >97.5%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5034–5038, 2006     

Synthesis and adsorption properties,toward some heavy metal ions,of a new polystyrene‐based terpyridine polymer

A novel polymeric ligand having 2,2′:6′,2″‐terpyridine as pendant group was prepared through a Williamson type etherification approach for the reaction between 4′‐hydroxy‐2,2′: 6′,2″‐terpyridine and the commercially available 4‐chloromethyl polystyrene. The chelating properties of the new polymer toward the divalent metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Pb²⁺) in aqueous solutions was studied by a batch equilibration technique as a function of contact time, pH, mass of resin, and concentration of metal ions. The amount of metal‐ion uptake of the polymer was determined by using atomic absorption spectrometry. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Pb²⁺ and that the metal‐ion uptake follows the order: Pb²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Conversion of soybean oil into ion exchange resins: Removal of copper (II), nickel (II), and cobalt (II) ions from dilute aqueous solution using carboxylate‐containing resin

An ion‐exchange resin containing carboxylic acid groups was prepared by reaction of epoxidized soybean oil with triethylene tetramine, followed by hydrolysis of glycerides by using sodium hydroxide solution. The cation exchange capacity of the resins was determined to be 3.50 mequiv/g. The adsorption capacity for Cu²⁺, Ni²⁺, and Co²⁺ on the obtained resin at pH 5.0 was found to be 192, 96, and 78 mg/g, respectively. Effect of pH on the adsorption capacity for copper (II), nickel (II), and cobalt (II) ions were also studied. Cu²⁺, Ni²⁺, and Co²⁺ were adsorbed at a pH above 3. These metal ions adsorbed on the resin are easily eluted by using 1N HCl solution. The selectivity of the resin for Cu²⁺ from mixtures containing Cu²⁺/Co²⁺/Ni²⁺ ions in the presence of sodium chloride was also investigated © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2386–2396, 2002     

Binding of heavy metal ions by formaldehyde-polymerized peanut skins

Peanut skin, when treated with formaldehyde to polymerize tannins, is a highly efficient substrate for removal of many heavy metal ions from aqueous waste solutions. The ions Ag¹⁺, Cd²⁺, Cr⁶⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, as well as Ca²⁺ and Mg²⁺, were contacted with formaldehyde-treated peanut skin. Quantitative removal could be achieved with Ag¹⁺, Cd²⁺, Cu²⁺, Hg²⁺, Pb²⁺, and Zn²⁺. Capacity of the substrate for ions was promising for Pb²⁺ (2.1 meq/g substrate), Cu²⁺ (3.0 meq/g), and Cd²⁺ (1.3 meq/g). Sorption from a solution containing Cd²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, on a packed column of formaldehyde-treated peanut skin indicated that Hg²⁺, Pb²⁺, and Cu²⁺ were rapidly and completely bound to the packing, while Cd²⁺, Ni²⁺, and Zn²⁺ were poorly bound until the preferred ions had been removed from solution.     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Adsorption properties of novel chelating resins containing 2‐amino‐5‐methylthio‐1,3,4‐thiadizole and hydrophilic spacer arms for Hg2+ and Ag+

The adsorption properties, including the adsorption kinetics, adsorption isotherms, and adsorption selectivity, of newly formed chelating resins that contained a heterocyclic functional group and a hydrophilic spacer arm of poly(ethylene glycol) [polystyrene–diethylene glycol–2‐amino‐5‐methylthio‐1,3,4‐thiadizole (PS–DEG–AMTZ) and polystyrene–triethylene glycol–2‐amino‐5‐methylthio‐1,3,4‐thiadizole (PS–TEG–AMTZ)] were studied in detail. The results show that the adsorption kinetics of PS–DEG–AMTZ and PS–TEG–AMTZ for Hg²⁺ and Ag⁺ could be described by a pseudo‐second‐order rate equation. The introduction of a spacer arm between the polymeric matrix and functional group was beneficial for increasing the adsorption rates. The apparent activation energies of the resins for Hg²⁺ and Ag⁺ were within 20.89–32.32 kJ/mol. The Langmuir model could describe the isothermal process of Hg²⁺ and Ag⁺. The competitive adsorption of the resins for Hg²⁺ and Ag⁺ in binary mixture systems was also investigated. The results show that Hg²⁺ and Ag⁺ were adsorbed before the other metal ions, such as Cu²⁺, Zn²⁺, Fe³⁺, Cd²⁺, and Pb²⁺, under competitive conditions. Five adsorption–desorption cycles were conducted for the reuse of the resins. The results indicate that these two resins were suitable for reuse without considerable changes in the adsorption capacity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Carboxyethylated polyaminostyrene for selective copper removal

In order to prepare copper selective chelating resin, β-alanine functionality was introduced into polystyrene matrix by the aza-Michael addition of poly(4-aminostyrene) to acrylic acid. The resin was characterized by elemental analysis and pH potentiometric titration in terms of the degree of carboxyethylation (DS = 1.3) and protonation constant of the amine group (log K _H = 7.48). The optimum pH for Cu²⁺ adsorption was found to be 7–8 (0.1 M ammonium acetate buffer) and the contact time required to achieve the equilibrium was about 1 h. The adsorption kinetics follows a pseudo-second order reaction rate, where the initial stage is governed by intraparticle diffusion. The adsorption isotherm data are in good agreement with the Langmuir model. The resin shows high adsorption capacity (1.26 mmol/g) and exhibits high selectivity toward Cu²⁺ ions with no affinity to Zn²⁺, Co²⁺, Cd²⁺ ions and only weak affinity to Ni²⁺ ions.     

Column studies on metal ion removal by dyed cellulosic materials

Cellulosic materials, namely bleached bamboo pulp, jute fibers, and sawdust dyed with a reactive dye of monochlorotriazine type were used in the column studies for removal of different metal ions. The use of an adsorption column makes the process continuous, so that it is economically viable on an industrial scale. After the adsorption of metal ions such as Cu²⁺, Pb²⁺, Hg²⁺, Fe²⁺, Fe³⁺, Zn²⁺ and Ni²⁺, the adsorbents were successfully regenerated by using dilute acids. These columns were then used repeatedly for adsorption either of the same salt for more than ten times or of different salts in succession. No loss in adsorption power was observed.     

Adsorption for metal ions of chitosan coated cotton fiber

A kind of adsorbent for metal ions, cotton fiber coated by high loading of chitosan (SCCH) was prepared. Its structure was characterized by elemental analysis, scanning electronic microscopy (SEM), Fourier transform infrared spectrum (FTIR), and wide‐angle X‐ray diffraction (WAXD). The adsorption properties of SCCH for Cu²⁺, Ni²⁺, Pb²⁺, Cd²⁺, such as saturated adsorption capacities, static kinetics, and isotherm were investigated. The adsorption for Ni²⁺, Pb²⁺, and Cd²⁺ was controlled by liquid film diffusion, but by particle diffusion for Cu²⁺. The adsorption process for Cu²⁺, Ni²⁺, Cd²⁺ could be described with Langmuir or Freundlich equation, but only with Freundlich equation for Pb²⁺. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and metal ions adsorption properties of chitosan–calixarenes (I)

Calixarene‐modified chitosans (CTS–CA‐I and CTS–CA‐II) were first synthesized by the reaction of chitosan (CTS‐NH₂) with 1,3‐bis‐chloroethoxyethoxy‐2,4‐dihydroxy‐p‐tert‐butylcalix[4]arene (CA‐I) or its benzoyl derivative (CA‐II). Their structures were characterized by infrared and X‐ray diffraction spectroscopy and scanning electron microscopy (SEM). The adsorption of Ni²⁺, Cd²⁺, Cu²⁺, Pd²⁺, Ag⁺, and Hg²⁺ by CTS–CA‐I and CTS–CA‐II was studied and the thermodynamic parameter of two calixarene‐modified chitosans toward Hg²⁺ was deduced. The adsorption properties of CTS–CA‐I and CTS–CA‐II were greatly varied compared with that CTS‐NH₂, especially with the adsorption capacity toward Ag⁺ and Hg²⁺, because of the presence of the calixarene moiety. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1139–1144, 2003     

Synthesis of azo‐functionalized ion‐imprinted polymeric resin for selective extraction of nickel(II) ions

The work presented involved the fabrication and evaluation of an ion‐imprinted azo‐functionalized phenolic resin for selective extraction of Ni²⁺ ions from aqueous media. The azo‐containing ligand was first synthesized by coupling of a p‐aminophenol diazonium salt with resorcinol. The ligand was coordinated with Ni²⁺ ion template before condensation polymerization with formaldehyde and resorcinol was performed. The Ni²⁺ ions were extracted from the crosslinked resin matrix to finally afford the Ni²⁺ ion‐imprinted Ni‐PARF adsorbent. The synthetic steps were extensively investigated using elemental analysis and Fourier transform infrared, NMR and energy‐dispersive X‐ray spectroscopies. Also, the surface morphologies along with the surface areas of the adsorbent resin were evaluated using scanning electron microscopy and Brunauer–Emmett–Teller techniques, respectively. Batch experiments indicated that the pseudo‐second‐order kinetic equation provided the best fit with the experimentally obtained kinetic data and equilibrium was reached after 40 min. The isotherm studies were also in a good fit with the Langmuir model and the maximum adsorption capacities of Ni²⁺ ions with respect to both Ni‐PARF and control non‐imprinted C‐PARF adsorbents were around 260 and 100 mg g^?1, respectively. In the presence of Co²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ as competing coexisting ions, the relative selectivity coefficients of Ni‐PARF for Ni²⁺ were, respectively, 84.91, 44.97, 30.41 and 32.20. Regeneration experiments indicated that after eight adsorption/desorption cycles, the Ni‐PARF adsorbent still maintained around 97% of its initial efficiency. © 2018 Society of Chemical Industry     

Synthesis of a polyacrylamide chelating resin and applications in metal ion extractions

A series of differently crosslinked polyacrylamide chelating resins were prepared, using N,N′-methylene-bis-acrylamide as the crosslinking agent. The crosslinked resins were functionalized by the reaction with ethylene diamine to get amino group capacities varying from 4.2 to 1.1 mequiv/g. The maximum adsorption capacities of the lightly crosslinked resin for Fe³⁺, Fe²⁺, Ni²⁺, and Cu²⁺ are 3.62, 4.22, 1.48, and 1.67 mequiv/g, respectively. The adsorbed metal ions can be quantitatively desorbed. The adsorption rate and the influence of pH on the adsorption of metal ions were examined. The resins can be used for the separation between different metal ions as well as the ions in different valence states (e.g., Fe³⁺ and Fe²⁺). The resin is amenable for continuous process and can be regenerated several times.     

Characterization of Adsorptive Capacity and Investigation of Mechanism of Cu2+, Ni2+ and Zn2+ Adsorption on Mango Peel Waste from Constituted Metal Solution and Genuine Electroplating Effluent

Abstract

The present study reports the potential of mango peel waste (MPW) as an adsorbent material to remove Cu²⁺, Ni²⁺, and Zn²⁺ from constituted metal solutions and genuine electroplating industry wastewater. Heavy metal ions were noted to be efficiently removed from the constituted solution with the selectivity order of Cu²⁺ > Ni²⁺ > Zn²⁺. The adsorption process was pH-dependent, while the maximum adsorption was observed to occur at pH 5 to 6. Adsorption was fast as the equilibrium was established within 60 min. Maximum adsorption of the heavy metal ions at equilibrium was 46.09, 39.75, and 28.21 mg g for Cu²⁺, Ni²⁺, and Zn²⁺, respectively. Adsorption data of all the three metals fit well the Langmuir adsorption isotherm model with 0.99 regression coefficient. Release of alkali and alkaline earth metal cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and protons H⁺ from MPW, during the uptake of Cu²⁺, Ni²⁺, and Zn²⁺, and EDX analysis of MPW, before and after the metal sorption process, revealed that ion exchange was the main mechanism of sorption. FTIR analysis showed that carboxyl and hydroxyl functional groups were involved in the sorption of Cu²⁺, Ni²⁺, and Zn²⁺. MPW was also shown to be highly effective in removing metal ions from the genuine electroplating industry effluent samples as it removed all the three metal ions to the permissible levels of discharge legislated by environment protection agencies. This study indicates that MPW has the potential to effectively remove metal ions from industrial effluents.     

Adsorption of metal cations on wool carbonising waste. Part 1. Adsorption isotherms

The adsorption of various metal ions (Hg²⁺, Ag⁺, Ni²⁺, Cr³⁺, Al³⁺, Zn²⁺ and Pb²⁺) on wool carbonising waste has been investigated to assess its possible use as an adsorbent in water pollution control. Isotherms show that few metal ions (Hg²⁺, Ag⁺ and Ni²⁺) are adsorbed satisfactorily by this material. Moreover, the adsorption capacity of the plant material within the carbonising waste is higher than that of the keratin fraction. Equations fitting the experimental data can be used for the design of processing units.