Preparation and characterization of polystyrene–clay nanocomposites by free‐radical polymerization

The polymerizable cationic surfactant, vinylbenzyldimethylethanolammouium chloride (VBDEAC), was synthesized to functionalize montmorillonite (MMT) clay and used to prepare exfoliated polystyrene–clay nanocomposites. The organophilic MMT was prepared by Na⁺ exchanged montmorillonite and ammonium cations of the VBDEAC in an aqueous medium. Polystyrene–clay nanocomposites were prepared by free‐radical polymerization of the styrene containing intercalated organophilic MMT. Dispersion of the intercalated montmorillonite in the polystyrene matrix determined by X‐ray diffraction reveals that the basal spacing is higher than 17.6 nm. These nanocomposites were characterized by differential scanning calorimetry (DSC), transmission electron micrograph (TEM), thermal gravimetric analysis (TGA), and mechanical properties. The exfoliated nanocomposites have higher thermal stability and better mechanical properties than the pure polystyrene. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1370–1377, 2002     

Use of acrylic based surfmers for the preparation of exfoliated polystyrene–clay nanocomposites

Two polymerizable cationic surfactants, (11-acryloyloxyundecyl)dimethyl(2-hydroxyethyl)ammonium bromide (hydroxyethyl surfmer) and (11-acryloyloxyundecyl)dimethylethylammonium bromide (ethyl surfmer), were used for the modification of montmorillonite (MMT) clay. The modification of MMT dispersions was carried out by ion exchange of the sodium ions in Na⁺-MMT by surfactants in aqueous media. Modified MMT clays were then dispersed in styrene and subsequently polymerized in bulk by a free-radical polymerization reaction to yield polystyrene–clay nanocomposites. An exfoliated structure was obtained using the ethyl surfmer-modified clay, whereas a mixed exfoliated/intercalated structure was obtained using the hydroxyethyl surfmer-modified clay. Nanocomposite structures were confirmed by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The nanocomposites exhibited enhanced thermal stability and an increase in glass transition temperature, relative to neat polystyrene. The nanocomposites also exhibited enhanced mechanical properties, which were dependent on the clay loading. Intercalated polystyrene–clay nanocomposites were obtained using the non-polymerizable surfactant-modified clay (cetyltrimethylammonium bromide). Nanocomposites made from mixtures of surfmer-modified and CTAB-modified clays were also prepared, showing intermediate properties. However, when the nanocomposites were prepared in solution only intercalated morphologies were obtained. This was attributed to the competition between the solvent molecules and monomer in penetrating into clay galleries. These nanocomposites also exhibited enhanced thermal stability relative to the virgin polystyrene prepared by the same method. Similar temperatures of degradation (at 50% decomposition) were found for these nanocomposites relative to those prepared by bulk polymerization.     

Preparation of polystyrene/montmorillonite nanocomposites in supercritical carbon dioxide

The preparation of polystyrene (PS)/montmorillonite (MMT) composites in supercritical carbon dioxide (SC? CO₂) was studied. Lipophilic organically modified MMT can be produced through an ion‐exchange reaction between native hydrophilic MMT and an intercalating agent (alkyl ammonium). PS/clay composites were prepared by free‐radical precipitation polymerization of styrene containing dispersed clay. X‐ray diffraction and transmission electron microscopy indicated that intercalation of MMT was achieved. PS/clay composites have a higher thermal decomposition temperature and lower glass‐transition temperature than pure PS. The IR spectrum analysis showed that the solvent of SC? CO₂ did not change the structures of the PS molecules, but there were some chemical interactions between the PS and the clay in the composites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 22–28, 2005     

Polystyrene nanocomposite materials by in situ polymerization into montmorillonite–vinyl monomer interlayers

A different series of new polystyrene–clay nanocomposites have been prepared by grafting polymerization of styrene with vinyl‐montmorillonite (MMT) clay. The synthesis was achieved through two steps. The first step is the modification of clay with the vinyl monomers, such as N,N‐dimethyl‐n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, n‐octadecyl‐4‐vinylbenzyl‐ammonium chloride, triphenyl‐4‐vinylbenzyl‐phosphonium chloride, and tri‐n‐butyl‐4‐vinylbenzyl‐phosphonium chloride. The second step is the polymerization of styrene with different ratios of vinyl‐MMT clay. The materials produced were characterized by different physical and chemical methods: (1) IR spectra, confirming the intercalation of the vinyl‐cation within the clay interlayers; (2) thermogravimetric analysis (TGA), showing higher thermal stability for PS–nanocomposites than polystyrene (PS) and higher thermal stability of nanocomposites with of phosphonium moieties than nanocomposites with ammonium moieties; (3) swelling measurements in different organic solvents, showing that the swelling degree in hydrophobic solvents increases as the clay ratio decreases; (4) X‐ray diffraction (XRD), illustrating that the nanocomposites were exfoliated at up to a 25 wt % of organoclay content; and (5) scanning electron microscopy (SEM), showing a complete dispersion of PS into clay galleries. Also, transmission electron microscopy (TEM) showed nanosize spherical particles of ～ 150–400 nm appearing in the images. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3739–3750, 2007     

Preparation of exfoliated high‐impact polystyrene/MMT nanocomposites via in situ polymerization under controlling viscosity of the reaction medium

Exfoliated high‐impact polystyrene (HIPS)/montmorillonite (MMT) nanocomposites were prepared via in situ polymerization of styrene in the presence of polybutadiene, using an intercalated cationic radical initiator‐MMT hybrid (organoclay). In the solution polymerization in toluene, the silicate layers of the clay were well exfoliated, due to the low extra‐gallery viscosity that can facilitate the diffusion of styrene monomers into the clay layers during the polymerization. The exfoliated HIPS/MMT nanocomposites were also successfully prepared by controlling the viscosity of the reaction medium with prolong swelling of the organoclay in styrene, prior to bulk polymerization. The HIPS/MMT nanocomposites, obtained from bulk polymerization, exhibited a significant improvement in thermal stability, compared to those obtained from solution polymerization as well as the pure polymer counterparts. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers     

Preparation and properties of polyethylene–clay nanocomposites by an in situ graft method

The polyethylene–clay nanocomposites were prepared by the in situ graft copolymerization of styrene containing twin‐benzyldimethyldioctadecylammonium bromine modified montmorillonite (TBDO‐MMT) in polyethylene with dicumyl peroxide (DCP) as an initiator in molten state. XRD and TEM analysis indicated that intercalated polyethylene/MMT nanocomposites are obtained. The mechanics performance, crystal behavior, thermal properties, and the effect of MMT contents on PE/MMT nanocomposite were also studied. As comparison, polyethylene/montmorillonite composites prepared by a simply melt compounding without styrene were studied as well. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4921–4927, 2006     

Preparation of polystyrene–clay nanocomposites via dispersion polymerization using oligomeric styrene‐montmorillonite as stabilizer

This study describes the preparation of polystyrene–clay nanocomposite (PS‐nanocomposite) colloidal particles via free‐radical polymerization in dispersion. Montmorillonite clay (MMT) was pre‐modified using different concentrations of cationic styrene oligomeric (‘PS‐cationic’), and the subsequent modified PS‐MMT was used as stabilizer in the dispersion polymerization of styrene. The main objective of this study was to use the clay platelets as fillers to improve the thermal and mechanical properties of the final PS‐nanocomposites and as steric stabilizers in dispersion polymerization after modification with PS‐cationic. The correlation between the degree of clay modification and the morphology of the colloidal PS particles was investigated. The clay platelets were found to be encapsulated inside PS latex only when the clay surface was rendered highly hydrophobic, and stable polymer latex was obtained. The morphology of PS‐nanocomposite material (after film formation) was found to range from partially exfoliated to intercalated structure depending on the percentage of PS‐MMT loading. The impact of the modified clay loading on the monomer conversion, the polymer molecular weight, the thermal stability and the thermomechanical properties of the final PS‐nanocomposites was determined. Copyright © 2012 Society of Chemical Industry     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004     

Synthesis of montmorillonite/polystyrene nanocomposites in supercritical carbon dioxide

Monomer styrene and initiator N,N′‐azobis(isobutyronitrile) were impregnated into montmorillonite (MMT) galleries using supercritical CO₂ at 35°C and 12.0 MPa, after thermal polymerization of monomer at 65°C, resulting in MMT/polystyrene nanocomposites. The morphology and structure of the products were characterized by FTIR, powder X‐ray diffraction, transmission electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. The results indicate that MMT is dispersed in the composite with intercalated and exfoliated structures, enhancing the thermal stability of nanocomposites. Changing the soaking time and the content of MMT in the supercritical solution during the impregnating process can control the exfoliated extent of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1194–1197, 2004     

Study on the dynamic self‐organization of montmorillonite in two phases

Polycarbonate (PC)/acrylonitrile–butadiene–styrene (ABS) polymer alloy/montmorillonite (MMT) and nylon 6 (PA6)/ABS polymer alloy/MMT nanocomposites were prepared using the direct melt intercalation technique. Their structures were characterized by XRD and TEM. The results of TEM show that the silicate layers dispersed differently in two phases. In the PC/ABS/MMT nanocomposite, the silicate layers were self‐organized in the ABS phase, whereas in the PA6/ABS/MMT nanocomposite, the silicate layers were dispersed in both phases but mainly in the PA6 phase. Furthermore, the PC/MMT nanocomposite was melt‐mixed with pure ABS, and the changed morphology of the hybrid with the change of melt‐mixing time was characterized by XRD and TEM, to study the dynamic self‐assembly of clay layers in two phases. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1457–1462, 2004     

A study of the effect of surfactants on the properties of polystyrene‐montmorillonite nanocomposites

Polystyrene‐Organo Montmorillonite (PS‐MMT) nanocomposites were prepared by suspension free radical polymerization of styrene in the dispersed organophilic montmorillonite. The results of X‐ray diffraction (XRD) and Transmission Electron Microscopy (TEM) indicated that exfoliated nanocomposites were achieved. The effect of organic modifiers (surfactants) on the properties of the synthesized nanocomposites was studied. It is found that polystyrene‐MMT nanocomposite with 5.0 wt% of organo‐MMT gave the greatest improvement in thermal stability, and polystyrene‐MMT nanocomposites with 7.5 wt% of organo‐MMT showed the greatest improvement in mechanical properties, compared with that of pure polystyrene (PS) in our experimental conditions. The alkyl chain length of surfactant used in fabricating organo‐MMT affects the synthesized PS nanocomposites: the longer the alkyl chain length that the surfactant possesses, the higher the glass transition temperature of the PS nanocomposite, However, the organoclay in the nanocomposites seems to play a dual role: (a) as nanofiller leading to the increase of storage modulus and (b) as plasticizer leading to the decrease of storage modulus. This results in a lower storage modulus of PS‐TMOMMT and PS‐TMTMMT nanocomposites than that of PS‐TMDMMT and PS‐TMCMMT nanocomposites. Further study is needed to confirm the above hypothesis.     

Preparation,structure, and properties of a novel rectorite/styrene–butadiene copolymer nanocomposite

Rectorite/styrene–butadiene copolymer (SBR) nanocomposite was prepared by cocoagulating SBR latex and rectorite/water suspension. Transmission electron microscopy showed that the layers of rectorite were well dispersed in the SBR matrix and the aspect ratio (width/thickness) of it was higher than that of montmorillonite (MMT). X‐ray diffraction indicated that the nanocomposite produced by this method was of neither intercalated type nor exfoliated type. The gas barrier properties and mechanical properties of the novel nanocomposites were excellent. The nanocomposites are expected to be candidates for tire tube or inner materials. Rectorite appears to be a promising filler for the nanocomposite. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 324–328, 2005     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003     

Formation of polymer nanocomposites with various organoclays

The role of the type of organic modifier used with montmorillonite (MMT) on the formation of polymer/clay nanocomposites in the melt compounding process was investigated. Various organoclays including primary [12‐aminolauric acid (12ALA)], secondary [dioctylamine (DOA)], tertiary [trioctylamine (TOA)], and two commercial quaternary (Cloisite 30B and 20A) MMTs were melt compounded with carefully selected polymers including polypropylene, polystyrene, styrene–acrylonitrile copolymer, poly(methyl methacrylate), poly(vinylidene fluoride), and acrylonitrile–butadiene copolymer (NBR). X‐ray diffraction and transmission electron microscopy characterizations confirmed that the two quaternary ammonium organoclay (Cloisite 30B and 20A) have superior compatibility compared to the primary (12ALA), secondary (DOA), and tertiary (TOA) ammonium organoclay. DOA and TOA can form polymer/clay nanocomposites only with the most polar polymer (NBR). Cloisite Na⁺ and 12ALA can not form nanocomposite with any polymers. The large organic surface area of the quaternary ammonium organoclay could be the reason of the best compatibility with polar polymers. It is estimated that long alkyl ammonium chains of organic modifier can spread over the clay surface more effectively than short alkyl chains. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1888–1896, 2005     

Thermoplastic elastomeric nanocomposites from poly[styrene–(ethylene‐co‐butylene)–styrene] triblock copolymer and clay: Preparation and characterization

Thermoplastic elastomer (TPE)–clay nanocomposites based on poly[styrene–(ethylene‐co‐butylene)–styrene] triblock copolymer (SEBS) were prepared. Natural sodium montmorillonite (MMT) clay was organically modified by octadecyl amine to produce an amine‐modified hydrophobic nanoclay (OC). Commercially available Cloisite 20A (CL20) and Cloisite 10A, tallow ammine modified nanoclays, were also used. The intergallery spacing of MMT increased on amine modification as suggested by the shifting of the X‐ray diffraction (XRD) peak from 7.6 to 4.5 and 3.8° in the cases of OC and CL20, respectively. The latter demonstrated no XRD peak when it was used at 2 and 4 parts phr in the SEBS system. Transmission electron microscopy studies showed the intercalation–exfoliation morphology in SEBS containing 4 parts of CL20₄–SEBS, agglomeration in SEBS having 4 parts of MMT, and mixed morphology in SEBS with 4 parts of OC systems. Locations of the clay particles were indicated by the atomic force micrographs. Mechanical and dynamic mechanical thermal analysis studies confirmed the best properties with the CL20₄–SEBS nanocomposites. Significant improvements in mechanical properties such as tensile strength, modulus, work to break, and elongation at break were achieved with the CL20₄–SEBS in polymer‐layered silicate nanocomposites. Dynamic mechanical studies further showed the affinity of the organoclays toward both segments of the TPE and a compatibilization effect with CL20 at a 4‐phr loading. Atomic force microscopy showed distinctly different morphologies in nanocomposites prepared through solution and melt processing. Comparisons of the mechanical, dynamic mechanical, and morphological properties of the nanocomposites prepared by melt and solution intercalation processes were done. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2040–2052, 2006     

Influence of clay content on the melting behavior and crystal structure of nonisothermal crystallized poly(L‐lactic acid)/nanocomposites

To study the effect of organophilic clay concentration on nonisothermal crystallization, poly(L ‐lactic acid) (PLLA)/montmorillonite (MMT) nanocomposites were prepared by mixing various amounts of commercial MMT (Cloisite^® 30B) and PLLA. The effect of MMT content on melting behavior and crystal structure of nonisothermal crystallized PLLA/MMT nanocomposites was investigated by differential scanning calorimetry (DSC), small‐angle X‐ray scattering, and wide‐angle X‐ray diffraction (XRD) analyses. The study was focused on the effect of the filler concentration on thermal and structural properties of the nonisothermally crystallized nanocomposite PLLA/MMT. The results obtained have shown that at filler loadings higher than 3 wt %, intercalation of the clay is observed. At lower clay concentrations (1–3 wt %), exfoliation predominates. DSC and XRD analysis data show that the crystallinity of PLLA/MMT composites increases drastically at high clay loadings (5–9 wt %). In these nanocomposites, PLLA crystallizes nonisothermally in an orthorhombic crystal structure, assigned to the α form of PLLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Role of the cation‐exchange capacity in the formation of polystyrene–clay nanocomposites by in situ intercalative polymerization

An effect of the cation‐exchange capacity (CEC) on the formation of polystyrene–clay nanocomposites is reported. Two types of 2:1 layered silicates with different CECs, Wyoming (97 mequiv/100 g of clay) and bentonite H (BNH; 131 mequiv/100 g of clay) were investigated. The organoclay was prepared through the mixing of purified clay and octadecyldimethylammonium chloride (ODA) in an aqueous solution. The packing of the intercalated ODA surfactant depended on the CEC and the degree of solvent extraction. Two possible phases of the interlayer packing, solidlike and liquidlike, were detected for the extracted BNH because of the charge heterogeneity of the clay. The liquidlike phase showed a good affinity toward the styrene monomer, which promoted the formation of exfoliated nanocomposites. On the other hand, the solidlike phase showed a restricted dispersion in the styrene monomer. The organoclay interlayer showed limited expansion by the styrene monomer. This led to the formation of intercalated nanocomposites. An increase in the organoclay loading hindered the formation of the exfoliated nanocomposites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 785–789, 2005     

Bulk polymerization of styrene in the presence of organomodified montmorillonite

The effect of montmorillonite (Cloisite 6A) on the bulk polymerization of styrene initiated by benzoyl peroxide (BPO) was studied by the dilatometric determination of the polymerization rates. The bulk polymerization rates increased as the montmorillonite input quantity increased. The effect became greater when the BPO concentration decreased. Under the assumption that clay participated in the radical initiation reaction of the chains, the reaction orders for clay and BPO were determined to be approximately 1.0 and 0.5, respectively. X‐ray diffraction and thermogravimetric analysis studies showed that the structure and properties of the obtained polystyrene (PS)/montmorillonite nanocomposites were greatly affected by the BPO concentration. With lower BPO concentrations, a larger interlayer distance and a higher extent of delamination for the clay were observed in the obtained PS/montmorillonite nanocomposites. The nanocomposites prepared with lower BPO concentrations also showed higher heat‐decomposition‐resistance temperatures. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1146–1152, 2005     

Thermal and mechanical behavior of unsaturated polyester [derived from poly(ethylene terephthalate) waste] and montmorillonite‐filled nanocomposites synthesized by in situ polymerization

Postconsumer poly(ethylene terephthalate) waste bottles were glycolyzed as precursors of unsaturated polyester resin (UPR) and their montmorillonite (MMT)‐filled nanocomposites. The glycolysis product (hydroxyl‐terminated oligomers) was converted into UPR with various acid contents. These resins were miscible with styrene and could be cured with peroxide initiators to produce thermosetting unsaturated polyester (UP). Nanocomposites composed of UP matrix and organically modified clay were prepared by in situ polymerization. These were characterized for thermal and dynamic mechanical properties. Transmission electron microscopy was also used to study the morphology at different length scales and showed the nanocomposites to be compromised of a random dispersion of intercalated/exfoliated aggregates throughout the matrix. With an increase in unsaturated acid content (for a fixed content of clay), the value of storage modulus varied from 2737 to 4423 MPa. The glass‐transition temperatures of these nanocomposites ranged from 54 to 78°C, and the crosslink density varied from 3.70 × 10⁵ to 5.72 × 10⁵ mol/m³. The X‐ray diffraction (XRD) of modified MMT exhibited a peak that vanished completely in the polymer nanocomposites. Thus, the XRD results apparently indicated a distortion of the platy layers of nanofiller in the UP nanocomposites. The nanocomposites showed higher modulus values (2737–4423 MPa) compared to the pristine polymer (2693 MPa). From thermogravimetric analysis, all of the nanocomposites were stable up to 200°C and showed a two‐stage degradation. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesize and characterization of styrene‐N‐phenyl maleimide/montmorillonite nanocomposites prepared through emulsion polymerization

Composites of organomodified (OMMT) and pristine montmorillonite (MMT) intercalated by styrene‐N‐phenyl maleimide (PMI) copolymer were prepared by emulsion intercalative polymerization. X‐ray diffraction (XRD) and transmission electron microscopy results show that the dispersability of clay in the matrix was greatly improved by the incorporation of polar moiety PMI. The dispersability of OMMT in the matrix is better than MMT. XRD patterns of the extracted nanocomposites showed that d₀₀₁ of the clay are much larger than that of the original OMMT and MMT, which indicates that the interaction of copolymer with the clay layers was greatly improved by incorporation with polar monomer PMI. The thermal property of the composites was greatly improved by the intercalation with clay. The DSC results showed that the glass transition of the composites became inconspicuous, which indicated that the movement of the polymer segment was extremely confined by the clay layer. The consistency factor of the melts of the composites increased monotonically with a decreasing flow index showing stronger shear thinning property of the composites. The rheological activity energy of the composites decreased more than that of the pure copolymer. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1010–1015, 2005