Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Synthesis of water‐insoluble functional copolymers containing amide,amine, and carboxylic acid groups and their metal‐ion‐uptake properties

The crosslinked poly[N‐(3‐dimethylamino)propylmethacrylamide] [P(NDAPA)] and poly[N‐(3‐dimethylamino)propylmethacrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] were synthesized by radical polymerization. The resins were completely insoluble in water. The metal‐ion‐uptake properties were studied by a batch equilibrium procedure for the following metal ions: silver(I), copper(II), cadmium(II), zinc(II), lead(II), mercury(II), chromium(III), and aluminum(III). The P(NDAPA‐co‐AA) resin showed a lower metal‐ion affinity than P(NDAPA), except for Hg(II), which was retained at 71% at pH 2. At pH 5, the resin showed a higher affinity for Pb(II) (80%) and Cu(II) (60%), but its affinity was very low for Zn(II) and Cr(III). The polymer ligand–metal‐ion equilibrium was achieved during the first 20 min. By changing the pH, we found it possible to remove between 60 and 70% of Cd(II) and Zn(II) ions with (1M, 4M) HClO₄ and (1M, 4M) HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5232–5239, 2006     

Metal ion retention properties of water‐insoluble polymers containing carboxylic acid groups

Crosslinked poly(acrylic acid), PAA, and poly(2‐acrylamidoglycolic acid), PAAG, were synthesized by radical polymerization. Both resins contain carboxylic acid groups. PAA at basic pH exists basically as an acrylate anion and PAAG shows three atoms or groups, carboxylic acid, hydroxyl, and amide groups, that can act as ion exchanger or chelating groups. Both resins are studied as adsorbents to trace metal ions from saline aqueous solutions and natural sea water and their properties by Batch equilibrium procedure are compared. The metal ions studied under competitive and noncompetitive conditions were Cu(II), Pb(II), Cd(II), and Ni(II). The effects of pH, time of contact, amount of resin, temperature, and salinity were studied. Resin PAA shows a high affinity (>80%) for Cu(II) and Cd(II) and resin PAAG shows also a high affinity for Ni(II), Pb(II), and Cd(II). By treatment of the metal ion‐loaded resin with 4M HNO₃ it is possible to recover completely the Cu(II) ions from resin PAA and Ni(II) and Pb(II) from resin PAAG. The metal ion retention properties were studied with natural sea water. For those natural sea waters containing Cu(II) and Cd(II), the resins showed a high affinity for Cd(II) ions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 697–705, 2006     

Resins containing amino and carboxylic acid groups. Synthesis,characterization, and metal ion retention properties

The crosslinked poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide], P(MAPDSA), and poly[3‐(methacryloylamino)propyl]dimethyl(3‐sulfopropyl)ammonium hydroxide‐co‐acrylic acid], P(MAPDSA‐co‐AA), were synthesized by radical polymerization. The resins were completely insoluble in water. Due to the lower metal ion retention of P(MAPDSA), the metal ions investigated under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) ions by batch and column equilibrium procedures were carried out only for P(MAPDA‐co‐AA), particularly for Hg(II). The resin–Hg(II) ion equilibrium was achieved before 15 min. The resin showed a maximum retention capacity value for Hg(II) at pH 2 of 1.89 meq/g. The resin showed a high selectivity to Hg(II) ions. The recovery of the resin was investigated at 25°C with different concentrations of HNO₃ and HClO₄. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 525–530, 2005     

Water‐insoluble polymers containing amine,sulfonic acid,and carboxylic acid groups: Synthesis,characterization, and metal‐ion‐retention properties

Crosslinked poly(acryloylmorpholine) and its copolymers poly(acryloyl morpholine‐co‐acrylic acid) and poly(acryloylmorpholine‐co‐2‐acrylamide‐2‐methyl‐1‐propane sulfonic acid) were synthesized by radical polymerization. The resins were completely insoluble in water and were characterized with Fourier transform infrared spectroscopy and thermal analysis. The metal ions Ag(I), Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), Al(III), and Cr(III) were investigated under competitive and noncompetitive conditions by a batch equilibrium procedure. The resin‐metal‐ion equilibrium was achieved before 5 min. The recovery of the resin was investigated at 20°C with different concentrations of HNO₃ and HClO₄. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3266–3274, 2006     

Preparation and adsorption properties of the chelating resins containing carboxylic,sulfonic, and imidazole groups

The crosslinked poly(1‐vinylimidazole‐co‐acrylic acid), P(VIm‐co‐AA), and poly(1‐vinylimidazole‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) P(VIm‐co‐APSA) were synthesized by radical polymerization and tested as adsorbents under competitive and noncompetitive conditions for Cu(II), Cd(II), Hg(II), Zn(II), Pb(II), and Cr(III) by batch equilibrium procedure. The resin–metal ion equilibrium was achieved before 1 h. The resin P(VIm‐co‐AA) showed a maximum retention capacity (MRC) value for Pb(II) at pH 3 and Hg(II) at pH 1 of 1.1 and 1.2 mEq/g, respectively, and the resin P(VIm‐co‐AA) showed at pH 3 the following MRC values: Hg(II) (1.5 mEq/g), Cd(II) (1.9 mEq/g), Zn(II) (2.7 mEq/g), and Cr(III) (2.8 mEq/g). The recovery of the resin was investigated at 25°C with 1 M and 4 M HNO₃ and 1 M and 4 M HClO₄. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2852–2856, 2003     

Polyelectrolyte‐assisted removal of metal ions with ultrafiltration

The water‐soluble polymers poly(styrene sulfonic acid‐co‐maleic acid) and poly(acrylic acid‐co‐maleic acid) were investigated with respect to their metal‐ion‐binding ability with ultrafiltration. The studied metal ions included Ag(I), Cu(II), Ni(II), Co(II), Ca(II), Mg(II), Pb(II), Cd(II), Zn(II), Al(III), and Cr(III) ions. The retention properties of the polyelectrolytes for the metal ions depended strongly on the ligand type. As for the carboxylate ligands, with increasing concentration and pH, the metal‐binding affinity increased. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1091–1099, 2005     

Multilayer composite surfaces prepared by an electrostatic self‐assembly technique with quaternary ammonium salt and poly(acrylic acid) on poly(acrylonitrile‐co‐acrylic acid) membranes

An electrostatic self‐assembly technique was applied to prepare ion complex polymer layers on polyacrylonitrile with acrylic acid segments {poly(acrylonitrile‐co‐acrylic acid) [P(AN‐co‐AA)]}. For the ionic complex layers, quaternary ammonium salts, such as cetyl trimethyl ammonium chloride (CTAC) and tetramethyl ammonium chloride (TMAC), were used as cationic species, and also, poly(acrylic acid) (PAA) was used as an anionic species. These cationic and anionic species were self‐assembled alternately on the surface of the P(AN‐co‐AA) membrane. Fourier transform infrared spectroscopy, AFM, and water contact angle measurements of the membrane surface were used to confirm the formation of the multilayer composites on the P(AN‐co‐AA). The permeabilities of water and macromolecules of different molecular weights were evaluated by a membrane filtration technique. The values of permeability strongly depended on the formation layer by layer of these ion composites on the base P(AN‐co‐AA). Through the measurement of the values of the contact angle of water, it was clear that surface nature of the base membrane treated by CTAC or TMAC and PAA dramatically changed. We concluded that such an electrostatic self‐assembly technique is useful for the preparation of multicomposite layers to modify the surface of base P(AN‐co‐AA) membranes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

High‐retention properties for Hg(II) ions of a resin containing ammonium and pyridine groups

The metal‐ion uptake behavior of the chelating resin poly([(3‐(methacryloylamino)propyl] trimethyl ammonium chloride‐co‐4‐vinyl pyridine) has been investigated. The resin is obtained by radical copolymerization in a yield of 99.6%. The hydrophilic resin shows a high retention capacity and selectivity toward Hg(II) ions in the presence of Cu(II), Pb(II), Cd(II), Zn(II), and Cr(III) ions. A retention of Hg(II) higher than 99% is observed after 5 min. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2595–2599, 2002     

Thermal properties of poly(maleic anhydride‐alt‐acrylic acid) in the presence of certain metal chlorides

Polychelates were synthesized by the addition of aqueous solutions of copper(II), cadmium(II), and nickel(II) chlorides to aqueous solutions of poly(maleic anhydride‐alt‐acrylic acid) [poly(MA‐alt‐AA)] in different pH media. The thermal properties of poly(MA‐alt‐AA) and its metal complexes were investigated with thermogravimetry and differential scanning calorimetry (DSC) measurements. The polychelates showed higher thermal stability than poly(MA‐alt‐AA). The thermogravimetry of the polymer–metal complexes revealed variations of the thermal stability by complexation with metal ions. The relative thermal stabilities of the systems under investigation were as follows: poly(MA‐alt‐AA)–Cd(II) > poly(MA‐alt‐AA)–Cu(II) > poly(MA‐alt‐AA)–Ni(II) > poly(MA‐alt‐AA). The effects of pH on the complexation and gravimetric analysis of the polychelates were also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3926–3930, 2006     

Metal‐ion‐retention properties of the poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine) resin

The water‐insoluble resin poly(2‐acrylamido‐2‐methyl‐1‐propanosulfonic acid‐co‐4‐vinyl pyridine), through a radical polymerization solution, was synthesized with ammonium persulfate as an initiator and N,N‐methylene bisacrylamide as a crosslinking reagent. The metal‐ion‐retention properties were studied by batch and column equilibrium procedures for the following metal ions: Hg(II), Cu(II), Cd(II), Zn(II), Pb(II), and Cr(III). These properties were investigated under competitive and noncompetitive conditions. The effects of the pH, maximum retention capacity, and regeneration capacity were studied. The resin showed a high retention ability for Hg(II) ions at pH 2.0. The retention of Hg(II) ions from a mixture of ions was greater than 90%. The resin showed a high selectivity for Hg(II) with respect to other metal ions. The Hg(II)‐loaded resin was able to be recovered with 4M HClO₄. The retention capacity was kept after four cycles of adsorption and desorption. The retention properties for Hg(II) were very similar with the batch and column methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3556–3562, 2003     

Water‐soluble copolymers of 1‐vinyl‐2‐pyrrolidone and acrylamide derivatives: synthesis,characterization, and metal binding capability studied by liquid‐phase polymer‐based retention technique

Radical copolymerizations of 1‐vinyl‐2‐pyrrolidone with acrylamide and N,N′‐dimethylacrylamide at different feed ratios were investigated. The copolymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR spectroscopy. The copolymer composition was determined from the ¹H NMR spectra and found to be statistical. The metal complexation of poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone) and poly(N,N′‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) for the metal ions Cu(II), Co(II), Ni(II), Cd(II), Zn(II), Pb(II), Fe(III), and Cr(III) were investigated in an aqueous phase. The liquid‐phase polymer‐based retention method is based on the retention of inorganic ions by soluble polymers in a membrane filtration cell and subsequent separation of low‐molecular compounds from the polymer complex formed. The metal ion interaction with the hydrophilic polymers was determined as a function of the pH and the filtration factor. Poly(N,N‐dimethylacrylamide‐co‐1‐vinyl‐2‐pyrrolidone) showed a higher affinity for the metal ions than poly(acrylamide‐co‐1‐vinyl‐2‐pyrrolidone). According to the interaction pattern obtained, Cr(III) and Cu(II) formed the most stable complexes at pH 7. Pb(II) and Zn(II) were not retained. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 741–750, 1999     

Metal ion adsorption behavior of poly[3‐(dimethylamine)propyl acrylate] and poly[3‐(dimethylamine)propylacrylate‐co‐acrylic acid] resins

Two resins were synthesized by radical polymerization using N,N′‐methylene‐bis‐acrylamide and ammonium persulfate as the crosslinking reagent and initiator, respectively. The yields were 98%. The resins were characterized by FTIR and UV‐Vis spectroscopy. Sorption behavior of resins toward Hg(II), Cd(II), Zn(II), Pb(II), and Cr(III) ions was studied at different pHs depending on the metal ion. Both resins showed selective sorption to Hg(II) ions at pH 2 from a mixture of all ions.The elution of Hg(II) bound to the resins was also investigated using perchloric acid at different concentrations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1251–1256, 2002; DOI 10.1002/app.10455     

Determination of the competitive adsorption of heavy metal ions on poly(n‐vinyl‐2‐pyrrolidone/acrylic acid) hydrogels by differential pulse polarography

Poly(N‐vinyl‐2‐pyrrolidone) and poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) hydrogels were prepared by gamma irradiation for the removal of heavy metal ions (i.e., lead, copper, zinc, and cadmium) from aqueous solutions containing different amounts of these ions (2.5–10 mg/L) and at different pH values (1–13). The observed affinity order in adsorption of these metal ions on the hydrogels was Zn(II) > Pb(II) > Cu(II) > Cd(II) under competitive conditions. The optimal pH range for the heavy metal ions was from 7 to 9. The adsorption of the heavy metal ions decreased with increasing temperature in both water and synthetic seawater conditions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2013–2018, 2003     

Homogeneous complex solution formed through interactions of poly(acrylamide‐co‐acrylic acid)/poly(acrylamide‐co‐dimethyldiallylammonium chloride) complex with M n+ hydration metal ions in aqueous media

A homogeneous complex solution, formed through inter‐polyelectrolyte complexation of poly(acrylamide‐co‐acrylic acid) (P(AM‐AA)) with poly(acrylamide‐co‐dimethyldiallylammonium chloride) (P(AM‐DMDAAC)) and interaction of the P(AM‐AA)/P(AM‐DMDAAC) complex with M ⁿ⁺ hydrated metal ion, was prepared and the structure and properties of the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ homogeneous complex solution were studied by UV spectrometry, dynamic light scattering and viscometry. The experimental results show that the homogeneous complex solution can be obtained by controlling the composition of the P(AM‐AA)/P(AM‐DMDAAC) complex and the M ⁿ⁺ metal ion content. Compared to the constituents, ie the P(AM‐AA) solution, the P(AM‐DMDAAC) solution and the P(AM‐AA)/P(AM‐DMDAAC) complex solution, the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ complex solution has a new peak at 270 nm in its UV spectrum, a larger hydrodynamic radius, and hence a higher solution viscosity, all of which indicate that there exist specific interactions between polymers and M ⁿ⁺ metal ions. These interactions lead to the formation of a network structure and hence an obvious increase not only in solution viscosity but also in resistance of the polymer solution to simple salts, to temperature changes and to shearing. © 2001 Society of Chemical Industry     

Synthesis and properties of chitosan‐modified poly(acrylic acid)

Potassium persulfate (K₂S₂O₈) was used to initiate the polymerization of acrylic acid (AA) monomer in a chitosan (CS) solution. Both a poly(acrylic acid) (PAA) homopolymer and a CS‐co‐PAA copolymer were produced. When the amount of AA was increased from 5 to 40 g with 5 g of CS, the total monomer conversion was found to increase from 89 to 98% after 2 h of reaction at 70°C. In addition, the percentage of reacted AA monomer being converted to the CS‐co‐PAA copolymer (copolymerization efficiency) and the weight composition of the PAA portion in the copolymer (copolymer composition) both increased with the amount of AA added. The structures and properties of the synthesized CS‐modified PAA polymers were studied. In Fourier transform infrared spectra, the formation of a polyelectrolyte complex between CS chains and PAA chains could be observed. From the thermograms obtained via differential scanning calorimetry, we found that the presence of rigid CS chains increased the glass‐transition temperature of PAA. Thermogravimetric analysis revealed three stages of degradation of the synthesized CS‐modified PAA polymers. The swelling ratio of the CS‐modified PAA polymers depended on the pH value and had a maximum value in a buffer solution at pH 7. This was due to the changes in the morphological structure with the pH value. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and metal complexation of poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) as polychelatogens in aqueous solution

We carried out the free‐radical copolymerization of N‐phenylmaleimide with acrylic acid and acrylamide with an equimolar feed monomer ratio. We carried out the synthesis of the copolymers in dioxane at 70°C with benzoyl peroxide as the initiator and a total monomer concentration of 2.5M. The copolymer compositions were obtained by elemental analysis and ¹H‐NMR spectroscopy. The hydrophilic polymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymers were performed. Hydrophilic poly(N‐phenylmaleimide‐co‐acrylic acid) and poly(N‐phenylmaleimide‐co‐acrylamide) were used for the separation of a series of metal ions in the aqueous phase with the liquid‐phase polymer‐based retention method in the heterogeneous phase. The method is based on the retention of inorganic ions by the polymer in conjunction with membrane filtration and subsequent separation of low‐molecular‐mass species from the formed polymer/metal‐ion complex. The polymer could bind several metal ions, such as Cr(III), Co (II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) inorganic ions, in aqueous solution at pH values of 3, 5, and 7. The interaction of the inorganic ions with the hydrophilic polymer was determined as a function of pH and a filtration factor. Hydrophilic polymeric reagents with strong metal‐complexing properties were synthesized and used to separate those complexed from noncomplexed ions in the heterogeneous phase. The polymers exhibited a high retention capability at pH values of 5 and 7. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Metal complexation studies of amylopectin‐graft‐poly[(N,N‐dimethylacrylamide)‐co‐(acrylic acid)]: a biodegradable synthetic graft copolymer

Synthesis of amylopectin‐graft‐poly[(N,N‐dimethylacrylamide)‐co‐(acrylic acid)] was carried out using solution polymerization technique with potassium persulfate as the initiator. The graft copolymer was characterized by measuring molecular weight using size exclusion chromatography, thermal analysis and Fourier transform infrared (FTIR) spectroscopy. The synthetic graft copolymer was used for the removal of some potentially toxic metal ions, Cu(II), Zn(II) and Ni(II), from their aqueous solutions. Various operating parameters like the amount of adsorbent, solution pH, contact time and temperature were studied. The adsorption data were well described by the pseudo‐second‐order and Langmuir isotherm models. Metal complexation studies were carried out experimentally using cyclic voltammetry and UV‐visible and FTIR spectroscopies. The metal complex structure was also studied theoretically using density functional theory with the Gaussian 09 program and the geometry of the complex structure was optimized. The metal complexation ability of the graft polymer was in the order Cu(II) > Ni(II) > Zn(II). Calculation of the various thermodynamic parameters was also done. The negative value of free energy change indicates the spontaneous nature of the adsorption. © 2015 Society of Chemical Industry     

Sorption properties of poly(styrene‐co‐divinylbenzene) amine functionalized weak resin

The poly(styrene‐co‐divinylbenzene) amine functionalized weak resin was studied as adsorbent of heavy metal ions from an aqueous solution by using the Batch equilibrium procedure. The resin adsorbed Hg(II) 56% (0.56 mEq/g) at pH 2, and 45% (1.13 mEq/g) of U(VI), 38% (0.36 mEq/g) of Pb(II) at pH 5 from an aqueous solution containing 1 g/L of each metal ion. It did not adsorb Cd(II), Zn(II). The equilibrium time was achieved during the first hour. The maximum load capacity for Hg(II) was 0.8 mEq/g (75 mg)/g dry resin. It is possible to recover around 60% of the resin after the treatment with 1–4 M HClO₄ and HNO₃ of the loaded Hg(II) resin. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2123–2127, 2001     

Interaction of poly(maleic anhydride‐alt‐acrylic acid) with transition metal cations,Ni2+, Cu2+, and Cd2+: A study by UV–Vis spectroscopy and viscosimetry

Interactions between poly(maleic anhydride‐alt‐acrylic acid), [poly(MA‐alt‐AA)] and Cu²⁺, Ni²⁺, and Cd²⁺ ions were studied by UV–vis spectroscopy and viscosimetry. Effects of nature and the concentrations of the metal ions on the complex formation were investigated and the formation constants of each complex were determined by the mole‐ratio method. UV–vis studies showed that the complex formation tendency increased in the followed order: Cd(II) < Ni(II) < Cu(II). This order was confirmed by the Irving–William series and the Pearson's classification. The influence of metal ions on the reduced viscosity of poly(MA‐alt‐AA) increased in the following order: Cu(II) < Ni(II) < Cd(II), and this result was explained by the concentration effect. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2698–2705, 2004