基于支持向量机的优化子采样曲面表示研究

讨论了基于点云数据的曲面表示问题．采用ε-支持向量回归机和v-支持向量回归机实现点云数据的两次预处理．使用贪婪算法求解几何优化问题,从而得到点云数据的一个曲面表示．实验结果表明,所提方法具有建模光顺性好、处理速度快等优点．     

大规模孔洞点云的快速重建算法研究 *

针对实际中经常存在的含有孔洞的点云数据 ,在原多层重建算法的基础上提出了一种可以进行点云补洞的快速曲面重建算法。首先对散乱点云数据进行空间自适应八叉剖分 ,然后对点云数据进行由粗到精的多层插值 ,建立隐式曲面方程 ,最后提出了两种加快重建的方法。加速算法可以减少重建时间 ,非常有利于处理大规模点云。实验结果证明 ,本算法对点云孔洞修补效果良好 ,重建速度快 ,效率高。     

基于VTK的三维点云曲面重建研究

针对三维点云数据重建效率低、不能实时交互等问题,利用鲁棒性强的Power Crust算法和三维可视化类库Visualization Toolkit (VTK)的良好并行机制与强大的图像处理能力,实现了三维点云数据曲面快速重建.该算法使用Power Crust对三维点云进行曲面重建,接着对得到的网格进行线性调整、简化和平滑,最后引入VTK进行渲染、绘制、显示,并实时交互.实验结果表明,该算法可以加快散乱点云数据的重建速度,较好地保持了点云数据的拓扑结构,提高了曲面重建的精确性和鲁棒性,且交互性强,适合实时处理.     

点云数据集的隐式曲面重构研究进展

点云数据的曲面重建就是对扫描设备获得的物体散乱数据点重建三维物体表面,它被广泛应用于计算机动画、目标识别、数据可视化以及地理信息系统。点云的隐式曲面重建由于能够去除点云噪声,修补孔洞和裂缝,不需要拼接和平滑等后续处理,成为点云数据集曲面重构的重要方法。文中综述了目前一些主要的隐式曲面重构方法,就隐式模型以及相应的曲面重构算法的优缺点进行了分析比较,并对隐式曲面重构存在的问题和未来发展方向作了相应的分析和讨论。     

人体局部曲面建模与自由变形方法

人体曲面建模与自由变形方法是实现人体数字化的关键技术。给出了提取平面点云数据的方法及平面点云排序算法，介绍了基于平面数据的B样条曲面重构算法，重点叙述了用FFD（Free Form Deformation）技术实现曲面变形的算法及自由变形方法的特点，最后给出了人体胸部曲面建模与自由变形的实例，实例表明使用FFD进行曲面变形的效果比较自然。     

类螺旋特征测点数据的闭曲面建模方法研究

复杂曲面及海量点云测量数据的曲面建模已成为通用CAD/CAM软件的重要功能;然而,对于复杂的闭曲面建模方法,仍然存在许多技术上的难题,至今尚未能很好的解决,比如,基于海量的测量数据,如何进行闭曲面特征点识别,如何进行区域分割与处理,这一切都使得闭曲面建模过程中很难采用已经成熟的自由曲面建模技术和方法.通过研究异步仿形测量原理以及测量数据类型,针对鞋楦测量形成的空间螺旋线数据特征,提出一种闭曲面建模方法.该方法包括如下步骤:首先对测量点数据处理;并以特征螺旋线数据为基础对曲面进行三角分割;最后,以三角Bezier曲面为基础进行曲面构造,并将各曲面进行拼接、裁剪,形成完整的曲面.采用该方法对鞋楦测量数据的建模实例说明,能够有效地对具有空间螺旋线数据特征的闭曲面进行数据处理、曲面重构,提高了产品建模效率.     

针对密集点云的快速曲面重建算法

为了能够快速地从高密度散乱点云生成三角形网格曲面,提出一种针对散乱点云的曲面重建算法.首先通过逐层外扩建立原始点云的近似网格曲面,然后对近似网格曲面进行二次剖分生成最终的精确曲面;为了能够处理噪声点云,在剖分过程中所有网格曲面顶点都通过层次B样条进行了优化.相比于其他曲面重建方法,该算法剖分速度快,且能够保证点云到所生成的三角网格曲面的距离小于预先设定容限.实验结果表明,文中算法能够有效地实现高密度散乱点云的三角剖分,且其剖分速度较已有算法有大幅提高.     

基于八叉树模型的三维点云数据预处理研究

三维点云数据密度大,包含有大量的冗余数据,并不适合直接用于后续曲面重构。文中重点计论了基于八叉树模型的点云数据预处理的方法。实例表明,该方法对点云数据处理的灵活性和适应性都较好,能够满足曲线和曲面重构的要求。     

基于全景照片复原的点云重建算法研究

针对数字孪生点云数据不适合直接浏览,并且难以直接用于三维网格模型重建的问题,提出了一种将场景稠密点云转换到多组全景照片和全景深度图,并合并到现有三维重建流程的方法.算法可以将现有激光扫描设备输出的点云数据采样和处理为连续的RGB颜色和深度图像数据,并与照片的重建流程、及连续深度图的重建流程相结合.经过实测表明,方法对重...     

逆向工程中的三维光学检测点云采样技术研究

针对大型复杂曲面产品三维光学检测技术在逆向工程中存在获取点云数据密度大、冗余点繁多、处理任务繁重等问题, 对光学检测获得的海量点云预处理技术和工作流程进行了研究, 提出了点云采样时的最终判据Δ(S, S′)。该判据在满足高精度、快速度、适简度的原则下以达到给定的最大允许误差或者指定点的数目为目标, 适用于重建几何精度要求较高的场合。以某大型水轮机叶片为例进行了采样和逆向建模精度分析, 证明了三维光学检测点云采样技术的正确性和可行性。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.