Nonlinear dynamic response of eccentrically stiffened FGM plate using Reddy’s TSDT in thermal environment

The nonlinear dynamics of an eccentrically stiffened functionally graded material (ES-FGM) plates resting on the elastic Pasternak foundations subjected to mechanical and thermal loads is considered in this article. The plates are reinforced by outside stiffeners with temperature-dependent material properties in two cases: uniform temperature rise and through the thickness temperature gradient. Both stiffeners and plate are deformed under temperature. Using Reddy’s third-order shear deformation plate theory, stress function, Galerkin and fourth-order Runge–Kutta methods, the effects of material and geometrical properties, temperature-dependent material properties, elastic foundations, and stiffeners on the nonlinear dynamic response of the ES-FGM plate in thermal environments are studied and discussed. Some obtained results are validated by comparing with those in the literature.     

Nonlinear thermal stability of eccentrically stiffened FGM double curved shallow shells

This article presents analytical solutions for the nonlinear static and dynamic stability of imperfect eccentrically stiffened functionally graded material (FGM) higher order shear deformable double curved shallow shell on elastic foundations in thermal environments. It is assumed that the shell’s properties depend on temperature and change according to the power functions of the shell thickness. The shell is reinforced by the eccentrically longitudinal and transversal stiffeners made of full metal. Equilibrium, motion, and compatibility equations are derived using Reddy’s higher order shear deformation shell theory and taking into account the effects of initial geometric imperfection and the thermal stress in both the shells and stiffeners. The Galerkin method is applied to determine load–deflection and deflection–time curves. For the dynamical response, motion equations are numerically solved using Runge–Kutta method. The nonlinear dynamic critical buckling loads are found according to the criterion suggested by Budiansky–Roth. The influences of inhomogeneous parameters, dimensional parameters, stiffeners, elastic foundations, initial imperfection, and temperature increment on the nonlinear static and dynamic stability of thick FGM double curved shallow shells are discussed in detail. Results for various problems are included to verify the accuracy and e?ciency of the approach.     

Thermal buckling analysis of functionally graded sandwich plates

Thermal buckling of functionally graded sandwich plates are presented in this article. Two common types of FGM sandwich plates, namely, homogeneous face layers with FGM core and FGM face layers with homogeneous core are considered. Material properties and thermal expansion coe?cient of FGM layers are assumed to vary continuously through-the-thickness according to a simple power-law distribution in terms of the volume fractions of the constituents. Equilibrium and stability equations of FGM sandwich plate with simply supported boundary conditions are derived using the higher-order shear deformation plate theory. The influence of the plate aspect ratio, the relative thickness, the gradient index, and the thermal loading conditions on the critical buckling temperature of FGM sandwich plates are investigated. The thermal loads are assumed to be uniform, linear, and nonlinear distribution through-the-thickness. A new simple solution for thermal buckling of FGM sandwich plates under nonlinear temperature rise is presented.     

Thermal Buckling of Functionally Graded Plates Resting On Elastic Foundations Using the Trigonometric Theory

In this article, thermal buckling analysis of functionally graded material (FGM) plates resting on two-parameter Pasternak's foundations is investigated. Equilibrium and stability equations of FGM plates are derived based on the trigonometric shear deformation plate theory and includes the plate foundation interaction and thermal effects. The material properties vary according to a power law form through the thickness coordinate. The governing equations are solved analytically for a plate with simply supported boundary conditions and subjected to uniform temperature rise and gradient through the thickness. Resulting equations are employed to obtain the closed-form solution for the critical buckling load for each loading case. The influences of the plate aspect ratio, side-to-thickness ratio, gradient index, and elastic foundation stiffnesses on the buckling temperature difference are discussed.     

Thermal buckling and postbuckling behavior of functionally graded carbon-nanotube-reinforced composite plates resting on elastic foundations with tangential-edge restraints

This article presents an analytical approach to investigate the buckling and postbuckling behavior of functionally graded nanocomposite plates reinforced by single-walled carbon nanotubes, resting on elastic foundations and subjected to thermal load due to uniform temperature rise or linear temperature change across the plate thickness. The material properties of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) are assumed to be temperature independent, graded in the thickness direction, and estimated by extended rule of mixture through a micromechanical model. Formulations are based on classical plate theory taking von Kármán nonlinearity, initial geometrical imperfection, Pasternak-type foundation interaction, and tangential-edge constraints into consideration. Approximate solutions of deflection and stress functions are assumed to satisfy simply supported boundary conditions, and the Galerkin method is applied to obtain closed-form expressions of buckling temperatures and temperature-deflection relations. The influences of carbon-nanotube volume fraction and distribution pattern, aspect ratios, stiffness of foundations, degree of tangential-edge constraints, and imperfection on the thermal buckling and postbuckling behavior of FG-CNTRC plates are analyzed and discussed.     

Nonlinear thermal dynamic response of shear deformable FGM plates on elastic foundations

This paper investigates the nonlinear dynamic response of thick functionally graded materials (FGM) plates using the third-order shear deformation plate theory and stress function. The FGM plate is assumed to rest on elastic foundations and subjected to thermal and damping loads. Numerical results for dynamic response of the FGM plate are obtained by Runge–Kutta method. The results show the influences of geometrical parameters, the material properties, the elastic foundations, and thermal loads on the nonlinear dynamic response of FGM plates.     

Exact Solution for Thermal Buckling of Functionally Graded Plates Resting on Elastic Foundations with Various Boundary Conditions

In this article, we investigate the buckling analysis of plates that are made of functionally graded materials (FGMs) resting on two-parameter Pasternak's foundations under thermal loads. Three different thermal loads were considered, i.e., uniform temperature rise (UTR), linear and non-linear temperature distributions (LTD and NTD) through the thickness. The mechanical and thermal properties of functionally graded material (FGM) vary continuously along the plate thickness according to a simple power law distribution. Employing an analytical approach, the five coupled governing stability equations, which are derived based on first-order shear deformation plate theory, are converted into two uncoupled partial differential equations (PDEs). Considering the Levy-type solution, these two PDEs are reduced to two ordinary differential equations (ODEs) with variable coefficients. Then, the ODEs are solved using an exact analytical solution, which is called the power series Frobenius method. The appropriate convergence study and comparison with previously published related articles was employed to verify the accuracy of the proposed method. After such verifications, the effects of parameters such as the plate aspect ratio, side-to-thickness ratio, gradient index, and elastic foundation stiffnesses on the critical buckling temperature difference are illustrated and explained. The critical buckling temperatures of functionally graded rectangular plates with six various boundary conditions are reported for the first time and can serve as benchmark results for researchers to validate their numerical and analytical methods in the future.     

THERMAL BUCKLING OF FUNCTIONALLY GRADED PLATES BASED ON HIGHER ORDER THEORY

Equilibrium and stability equations of a rectangular plate made of functionally graded material (FGM) under thermal loads are derived, based on the higher order shear deformation plate theory. Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental partial differential equations is established. The derived equilibrium and stability equations for functionally graded plates (FGPs) are identical to the equations for laminated composite plates. A buckling analysis of a functionally graded plate under four types of thermal loads is carried out and results in closed-form solutions. The critical buckling temperature relations are reduced to the respective relations for functionally graded plates with a linear composition of constituent materials and homogeneous plates. The results are compared with the critical buckling temperatures obtained for functionally graded plates based on classical plate theory given in the literature. The study concludes that higher order shear deformation theory accurately predicts the behavior of functionally graded plates, whereas the classical plate theory overestimates buckling temperatures.     

Thermomechanical postbuckling behavior of CNT-reinforced composite sandwich plate models resting on elastic foundations with elastically restrained unloaded edges

Buckling and postbuckling behaviors of two models of sandwich plate reinforced by carbon nanotubes (CNTs) resting on elastic foundations and subjected to uniaxial compressive and thermomechanical loads are investigated in this paper. Material properties of all constituents are assumed to be temperature dependent and effective properties of CNT-reinforced composite layer are determined according to extended rule of mixture. Governing equations are established within the framework of first-order shear deformation theory taking into account von Kármán nonlinearity, initial geometrical imperfection, plate-foundation interaction and tangential elastic constraints of unloaded edges. Three types of loading are considered including uniaxial compression, preexisting thermal load combined with uniaxial compression and preexisting mechanical load combined with thermal load. Approximate analytical solutions are assumed to satisfy simply supported boundary conditions and the Galerkin method is used to derive nonlinear load-deflection relations from which buckling loads and postbuckling equilibrium paths are determined. The most important findings are that tangential constraints of unloaded edges significantly lowers buckling loads and postbuckling load capacity of sandwich plates and, in contrast, buckling loads and postbuckling strength are considerably enhanced as sandwich plate is constructed from CNT-reinforced composite core layer and homogeneous face sheets.     

Thermal Buckling of Functionally Graded Plates According to a Four-Variable Refined Plate Theory

In this article, a four-variable refined plate theory is presented for buckling analysis of functionally graded plates. The theory, which has strong similarity with classical plate theory in many aspects, accounts for a quadratic variation of the transverse shear strains across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. A power law distribution is used to describe the variation of volume fraction of material compositions. Equilibrium and stability equations are derived based on the present theory. The non-linear governing equations are solved for plates subjected to simply supported boundary conditions. The thermal loads are assumed to be uniform, linear and non-linear distribution through-the-thickness. The influences of many plate parameters on buckling temperature difference will be investigated. It is noticed that the present refined plate theory can predict accurately the critical temperatures of simply supported functionally graded plates.     

Thermal buckling and postbuckling analysis of piezoelectric FGM beams based on high-order shear deformation theory

This article deals with the thermal buckling and postbuckling of functionally graded material (FGM) beams with surface-bonded piezoelectric actuators based on physical neutral surface concept and high-order shear deformation theory including von Kármán strain–displacement relationships. The beams are exposed to a uniform temperature field and electric field, the material properties of FGM layers are temperature-dependent and vary in the thickness direction. The approximate solutions of piezoelectric FGM beams for thermal buckling and postbuckling are obtained by a two-step perturbation method, meanwhile, the analytical solutions of Timoshenko beam model and Euler beam model are also presented. The validity of the present work can be confirmed by comparisons with previous results. The effects of the applied actuator voltage, beam geometry as well as volume fraction index of FGM beam on the critical buckling temperature, and postbuckling load–deflection relationships are investigated.     

Thermal Post-Buckling of Functionally Graded Material Circular Plates Subjected to Transverse Point-Space Constraints

Axisymmetrical thermal post-buckling of functionally graded material (FGM) circular plates with immovably clamped boundary and a transversely central point-space constraint was studied. The material properties of the plate were assumed to vary as power law functions in the thickness direction and the temperature rise field to change only in the thickness direction. Based on von Karman's non-linear plate theory, governing equations in terms of the displacements of the middle plane were established. Temperature rise field was obtained by solving the one-dimensional heat conduction equation associated with specified boundary conditions at the top and bottom surface of the plate. By using the shooting method, thermal post-buckling deformation of the FGM circular plate was obtained before and after the plate contacting the point-space constraint. The changes in the characteristics of the deformation and the internal forces of FGM plates were discussed. The effects of gradients of material properties and non-uniform temperature rise parameters on the thermal post-buckling behaviors of FGM circular plates were also examined.     

Elastoplastic analysis of FGM plate with a central cutout of various shapes under thermomechanical loading

The present work aims to study the elastoplastic buckling, postbuckling, and failure behavior of perforated Ni/Al₂O₃ functionally graded material (FGM) plate with various shaped cutouts (i.e., circular, square, diamond, and elliptical) of various sizes under thermomechanical loading conditions using finite element method (FEM). The nonlinear FEM formulation is based on the first-order shear deformation theory and von Kármán’s nonlinear kinematics in which the material nonlinearity is incorporated. The nonlinear temperature-dependent thermoelastic material properties of FGM plate are varied in the thickness direction by controlling the volume fraction of the constituent materials (i.e., ceramic and metal) as per a power law, and Mori–Tanaka homogenization scheme is applied to evaluate the properties at a particular thickness coordinate of FGM. In accordance with the Tamura–Tomota–Ozawa model (TTO model), the ceramic phase of FGM is considered to be elastic, whereas the metal phase is assumed to be elastoplastic. Further, the elastoplastic analysis of FGM is assumed to follow J₂ plasticity with isotropic hardening. After validating the present formulation with the results available in the literature, various numerical studies are conducted to examine the effects of material inhomogeneity, thermal loading, cutout shape, and size on the elastoplastic buckling, postbuckling, and failure behavior of perforated FGM plate. It is observed that for smaller cutout sizes, the FGM plate with square shape cutout possesses maximum value of ultimate failure load; however, for larger cutout size, the FGM plate with diamond cutout depicts highest ultimate failure load. Furthermore, for all cutout shapes, the ultimate failure load of FGM plate decreases with an increase in cutout size. It is also revealed that irrespective of shape and size of cutout, the material plastic flow has considerable effect on postbuckling path of FGM plate, and under thermomechanical loading conditions, the FGM plate shows destabilizing response after the point of maximum postbuckling strength.     

Thermal Stability of FGM Sandwich Plates Under Various Through-the-Thickness Temperature Distributions

A thermal stability analysis of functionally graded material (FGM) isotropic and sandwich plates is carried out by virtue of a refined quasi-3D Equivalent Single Layer (ESL) and Zig-Zag (ZZ) plate models developed within the framework of the Carrera Unified Formulation (CUF) and implemented within the Hierarchical Trigonometric Ritz Formulation (HTRF). The Principle of Virtual Displacements (PVD) is used both to derive the thermal stability differential equations with natural boundary conditions and to develop the HTRF. Uniform, linear, and non-linear temperature rises through-the-thickness direction are taken into account. The non-linear temperature distribution is given in different forms: 1) functionally graded; 2) solution of the one-dimensional Fourier heat conduction equation; and 3) sinusoidal. Several FGM sandwich plate configurations are investigated. Parametric studies are carried out in order to evaluate the effects of significant parameters, such as volume fraction index, length-to-thickness ratio, boundary conditions, aspect ratio, sandwich plate type, and temperature distribution through-the-thickness direction, on the critical buckling temperatures.     

REFINED THEORY FOR THERMOELASTIC STABILITY OF FUNCTIONALLY GRADED CIRCULAR PLATES

Axisymmetric thermal and mechanical buckling of functionally graded circular plates is considered. Equilibrium and stability equations under thermal and mechanical loads are derived based on first-order shear deformation plate theory. Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental ordinary differential equations is established. Buckling analysis of a functionally graded plate under uniform temperature rise, linear and nonlinear gradient through the thickness, and uniform radial compression are considered, and the critical buckling loads are derived for clamped edge plates. The results are compared with the buckling loads obtained for a functionally graded plate based on the classical plate theory given in the literature.     

Thermal buckling and postbuckling responses of geometrically imperfect FG porous beams based on physical neutral plane

Abstract

Considering the third-order shear deformation and physical neutral plane theories, thermal postbuckling analysis for functionally graded (FG) porous beam are performed in this research. The cases of shear deformable functionally graded materials (FGM) beams with initial deflection and uniformly distributed porosity are considered. Geometrically imperfect FG porous beams with two different types of immovable boundary conditions as clamped–rolling and clamped–clamped are analyzed. Thermomechanical nonhomogeneous material properties of the FG porous beam are assumed to be temperature and position dependent. FG porous beams are subjected to different types of thermal loads as heat conduction and uniform temperature rise. Heat conduction equation is solved analytically using the polynomial series solution for the one-dimensional condition. The governing equilibrium equations are obtained by applying the virtual displacement principle. Assuming von Kármán type of geometrical nonlinearity, equilibrium equations are nonlinear and are solved using an analytical method. A two-step perturbation technique is used to obtain the thermal buckling and postbuckling responses of FG porous beams. The numerical results are compared with the case of perfect FGM Timoshenko beams without porosity distribution based on the midplane formulation. Parametric studies of the perfect/imperfect FG porous beams for two types of thermal loading and boundary conditions are provided.     

Effects of nonlinear hygrothermomechanical loading on bending of FGM rectangular plates resting on two-parameter elastic foundation using four-unknown plate theory

In the present study, a simple four-unknown exponential shear deformation theory is developed for the bending of functionally graded material (FGM) rectangular plates resting on two-parameter elastic foundation and subjected to nonlinear hygrothermomechanical loading. The elastic properties, coefficient of thermal expansion, and coefficient of moisture expansion of the plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of material constituents. Unlike first-order and other higher-order plate theories, the present theory has four independent unknowns. The in-plane displacement field of the present theory uses exponential functions in terms of thickness co-ordinate for calculating out-of-plane shearing strains. The transverse displacement includes bending and shear components. The principle of virtual displacement is employed to derive the governing equations and associated boundary conditions. A Navier solution technique is employed to obtained an analytical solutions. The elastic foundation is modelled as two-parameter Winkler–Pasternak foundation. The numerical results obtained are compared with previously published results wherever possible to prove the efficacy and accuracy of the present theory. The effects of stiffness and gradient index of the foundation on the hygrothermomechanical responses of the plates are discussed.     

Size dependent thermal buckling and postbuckling of functionally graded circular microplates based on modified couple stress theory

In this article, size-dependent thermal buckling and postbuckling behavior of a functionally graded circular microplate under uniform temperature rise field and clamped boundary conditions is investigated. Material properties are assumed to gradually vary through the thickness according to a simple power law. Equilibrium equations and associated boundary conditions are derived using variational method and based on modified couple stress theory, classical plate theory and von Kármán geometric nonlinearity. The differential quadrature method is used to discretize the governing equations. This technique is accompanied by an iterative method to determine the thermal postbuckling behavior of microplate. Finally, effects of length scale parameter, power law index and ratio of thickness to radius on the thermal buckling and postbuckling behavior of FG circular microplate are investigated.     

Research on shakedown analysis for functionally graded material plate under thermomechanical loading

Shakedown is an important problem in the design and analysis of functionally graded structures subjected to cyclic, thermal, and mechanical loadings. Subjected to constant mechanical load and cyclic temperature change, static shakedown of a functionally graded material plate and its homogenous counterpart were analyzed in this article with the approach proposed by the authors previously. The functionally graded material plate is composed of an elastoplastic matrix Al and elastic particles SiC, and the particle volume fraction varies through the thickness. The distributions of the effective mechanical and thermal properties of the composites through the thickness are described graded continuously with an exponential law. The results show that a proper and continuously graded distribution of material properties can efficiently improve the shakedown capability of the functionally graded material plate and also show the significance of shakedown analysis and application for functionally graded material plates.     

Thermal Buckling Response of Functionally Graded Plates with Clamped Boundary Conditions

In this research work, an exact analytical solution for thermal buckling analysis of functionally graded material (FGM) plates with clamped boundary condition subjected to uniform, linear, and non-linear temperature rises across the thickness direction is developed. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory accounts for parabolic distribution of the transverse shear strains, and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factor. The material properties of FGM plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of the volume fractions of the constituents. The governing equations are solved analytically for a plate with simply supported boundary conditions. Resulting equations are employed to obtain the closed-form solution for the thermal force resultant for each loading case. Numerical examples covering the effects of the plate aspect ratio, side-to-thickness ratio and gradient index on thermal force resultant are discussed.