Study on the outcome of a cetane improver on the emission characteristics of a diesel engine

ABSTRACT

Dimethyl carbonate (DMC), a cetane improver, is used as a fuel additive to investigate the exhaust emission in diesel engine. Neem oil biodiesel (B100), neem oil biodiesel + dimethyl carbonate (B100+DMC) and diesel were used as test fuels. DMC is added 0.5% by volume to biodiesel. This research work was executed in a four-stroke, single-cylinder diesel engine. Owing to the percentage of DMC in biodiesel, carbon monoxide (CO) and hydrocarbon (HC) emissions were dropped corresponding to diesel. A considerable amount of nitrogen oxide (NO_x) is decreased when diesel is used, and by the addition of B100+DMC, NO_x were slightly reduced compared to B100.     

Effect of exhaust gas recirculation on a nanoparticle-doped biodiesel- and diesel-blends-fuelled diesel engine

ABSTRACT

This work investigates the effect of adding Cerium oxide nanoparticles at different proportions (30, 60 and 90?ppm) to Calophyllum inophyllum methyl ester and diesel blends (20% CI methyl ester and 80% diesel) in a four-stroke single-cylinder diesel engine. Addition of nanoparticles is a strategy to reduce emission and to improve the performance of the biodiesel. Modified fuels are introduced into the engine by admitting exhaust gas recirculation (EGR) at a rate of 10% and 20% so as to reduce nitrogen oxide (NO_X) emissions from biodiesel and diesel blends. Results revealed a significant reduction in emissions (CO, NO_X, HC and Smoke) at a 10% EGR rate. However, brake thermal efficiency is reduced with an increase in brake-specific fuel consumption at higher EGR rates. Hence, it is observed that 10% EGR rate is an effective method to control the emission of biodiesel and diesel blends without compromising much on engine efficiency.     

Experimental analysis of the effects of cerium oxide nanoparticles on a single-cylinder diesel engine using biofuel blended with diesel as fuel

Energy demand is the hot topic of all developing and developed countries. Energy demand has been increasing day by day at a high rate. So, it is necessary to find an alternative solution that is eco-friendly. Biodiesel can be the alternative solution for this problem. The main purpose of this paper is to test the engine performance and emission parameters of a diesel engine using pure cinnamon oil blended with diesel and using cerium oxide as a catalyst. The parameters measured are brake power, brake thermal efficiency, specific fuel conception, CO₂, CO, NO_x and HC.     

Evaluation of performance and emission behaviour of DI diesel engine powered by biofuel

In this experiment, the performance, emission, and combustion characteristics of a diesel engine were tested using bio-fuel (Anise oil) at different loads. The main focus of this study was to compare the existing biodiesel blends with the proposed mixture (anise?+?cerium oxide) of biodiesel blends in terms of engine parameters, cost, efficiency, and pollution control. The blends used in this experiment are B10 (Biodiesel-10%), B20 (Biodiesel-20%), and B30 (Biodiesel-30%). The emission and performance parameters considered for the test are SFC (specific fuel consumption), CO (carbon monoxide), NO_X (nitrogen oxide), and HC (hydrocarbon). These parameters were tested for different load conditions such as 0%, 25%, 50%, 75%, and 100%. From the results, it shows that SFC is lower for B20 blend compared to that of pure diesel fuel, while B10, B30, B40, and B50 blends have slightly higher values. From the experiment, it is found that emissions of the HC and NO_x were reduced and CO emission is slightly higher than the pure diesel.     

Experimental investigations on the influence of properties of Calophyllum inophyllum biodiesel on performance,combustion, and emission characteristics of a DI diesel engine

The current state of future energy and environmental crises has revitalised the need to find alternative sources of energy due to escalating oil prices and depleting oil reserves. To meet increasing energy requirements, there has been a growing interest in alternative fuels like biodiesel that can become a suitable diesel fuel substitute for compression ignition engine. Biodiesel offers a very promising alternative to diesel fuel, since they are renewable and have similar properties. Calophyllum inophyllum seed oil collected from different restaurants in the Nagapattinam region of South India was converted into methyl esters (biodiesel) by transesterification. Biodiesel produced from C. inophyllum oil was blended with diesel by different volume proportions (25%, 50%, and 75%). Biodiesel and its blends were tested on a direct injection (DI) diesel engine at a constant speed by varying loads from 0% to 100% in steps of 20% to analyse its performance, emission, and combustion characteristics. The results obtained were compared with that of diesel fuel. B25 (27.5%) showed better performance than diesel fuel (26.28%) at full load and B50 showed performances similar to diesel fuel. Smoke density of B25 was slightly (2.6%) higher than that of diesel at full load conditions. At full load, measured carbon monoxide emissions for B25 and B50 were 4% lower than that of diesel. Hydrocarbon emissions for B25 and B100 were 5.37% and 25.8% higher than that of diesel, respectively. Nitrogen oxides (NO_x) emission was lower for all biodiesel blends. NO_x emissions of B100 and B75 were lower than that of diesel by 22.16% and 13.29% at full load, respectively. Combustion profile was smoother, and no knocking problem was observed while operating with biodiesel blends. B75 produced peak cylinder pressure.     

Experimental analysis on a DI diesel engine with cerium-oxide-added Mahua methyl ester blends

An investigational research is carried out to found the performance and emission characteristics of a direct injection (DI) diesel engine with cerium oxide nanoparticles additives in diesel and biodiesel blends. Mahua methyl ester was produced by transesterification and blended with diesel. Cerium oxide nanoparticles of 50 and 100?ppm in proportion are subjected to high-speed mechanical agitation followed by ultra-sonication. The experimentations was conducted on a single cylinder DI diesel engine at a constant speed of 1500?rpm using different cerium-oxide (CeO₂)-blended biodiesel fuel (B20?+?50?ppm, B20?+?100?ppm, B50?+?50?ppm and B50?+?100?ppm) and the outcomes were compared with those of neat diesel and Mahua biodiesel blend (B20 and B50). The experimental results indicated that brake thermal efficiency of B20?+?100?ppm cerium oxide was increased by 1.8 with 1% betterment in specific fuel consumption. Emissions of hydrocarbon and carbon monoxide were reasonably lower than Diesel fuel.     

A comparative study of performance and combustion characteristics of a CI diesel engine fuelled with B20 biodiesel blends

This paper aims to study the diesel engine performance and combustion characteristics fuelled with Banalities aegyptiaca oil methyl ester, palm oil methyl ester, sesame methyl ester oil, rapeseed methyl ester oil, soybean oil methyl ester and diesel fuel. In this present work, only 20% of each biodiesel blends was tested in diesel engine; stated that the possible use of biodiesel of up to 20% in a diesel engine without modification in literature. A single-cylinder, auxiliary water-cooled and computer-based variable compression ratio diesel engine was used to evaluate their performance at constant speed and at measured load conditions. The performance and combustion tests are conducted using each of the above test fuels, at a constant speed of 5000?rpm. Thus, the varying physical and chemical properties of test fuels against pure diesel are optimised for better engine performance.

Abbreviations: BP: brake power; BSFC: brake-specific fuel consumption; BTE: brake thermal efficiency; CO: carbon monoxide; CP: cylinder pressure; DP: diesel pressure; EGT: exhaust gas temperature; HC: hydrocarbon; HRR: heat release rate; NO _x : nitric oxides; PM: particulate matter; TDC: top dead centre; VCR: variable compression ratio     

Effect of compression ratio on nano-particle doped fuel blends in unmodified research engine

ABSTRACT

Compression ratio is a significant factor among different parameters which governs the emissions and performance factors of the research engine. This work portrays the effect of compression ratio (CR) on cerium oxide nano-particle doped biodiesel and diesel blends. The doping is made at 30, 60 and 90?ppm. The modified fuels are introduced in different compression ratio of 16, 18 and 20. 1500?rpm research engine is made use in this study. Result revealed a significant reduction in emissions (CO, HC and Smoke) at CR?=?20. Further, Performance (BSFC, BTE) is improved for fuel blends at CR?=?20.     

Influence of injection timing on cerium oxide nanoparticle doped in waste cooking palm oil bio-diesel and diesel blends fuelled in diesel engine

ABSTRACT

Injection timing (IT) is a vital factor among different injection parameters which governs the emissions and performance factors of the engine. This work portrays the effect of IT on cerium oxide nanoparticle doped Waste Cooking Palm Oil biodiesel and diesel blends. The doping is made at 30, 60 and 90?ppm. The modified fuels are introduced in reducing IT of 19°, 21° and 23°bTDC. 1500?rpm engine is made use in this study. Results revealed a significant reduction in emissions (CO, NO_X, HC and Smoke) at IT?=?23°bTDC. Furthermore, performance (BSFC, BTE) is improved for fuel blends at IT?=?23°bTDC.     

Experimental analysis of DI diesel engine using dual biofuel blended with diesel

ABSTRACT

In recent years, biodiesel has become more attractive as an alternative fuel for diesel engines because of its environmental benefits and the fact is that it is made from renewable resources. The role of biodiesel is not to replace petroleum diesel, biofuels help to improve the economical growth and positive impacts on the environment. The main purpose of this research is to reduce the emission such as carbon monoxide (CO), nitrogen oxides (NO_X), hydrocarbons (HC) and carbon dioxide (CO₂). And to increase the performance characteristics such as break thermal efficiency (BTE), specific fuel consumption (SFC) of diesel engines. Here we used dual biofuel (lemongrass oil plus mint oil) blended with diesel and cerium oxide is added as an additive and undergone the test of engine performance and emission parameters of diesel. The measuring parameters are BTHE, specific fuel conception, CO₂, CO, NO_x and HC.     

Experimental analysis of Deccan hemp oil as a new energy feedstock for compression ignition engine

This study investigates the biodiesel from Deccan hemp oil and its blends for the purpose of fuelling diesel engine. The performance and emission characteristics of Deccan hemp biodiesel are estimated and compared with diesel fuel. The experimental investigations are carried out with different blends of Deccan hemp biodiesel. Results show that brake thermal efficiency is improved significantly by 4.15% with 50 BDH when compared with diesel fuel. The Deccan hemp biodiesel reduces NO_x, HC and CO emission along with a marginal increase in CO₂ and smoke emissions with an increase in the biodiesel proportion in the diesel fuel. The improvement in heat release rates shows an increase in the combustion rate with different percentage blends of Deccan hemp biodiesel. From the engine test results, it has been established that 30–50 BDH of Deccan hemp biodiesel can be substituted for diesel.     

Investigation on the effect of thermal barrier coating at different dosing levels of cerium oxide nanoparticle fuel on diesel in a CI engine

ABSTRACT

In the recent times, the limitations on the exhaust emissions of the internal combustion engines are becoming increasingly rigorous due to environmental safety. Carbon monoxide, oxides of nitrogen, particulates and hydrocarbon are the prime noxious waste emitted by diesel engines. This experimental study involves the analysis of engine performance and emission characteristics of a single cylinder diesel engine with yttria- and ceria-stabilised zirconia coating on a cylinder liner and piston head. Varied dosing levels were added to diesel in both uncoated and coated engines. The experiment resulted in noticeable changes in the selected thermal barrier coating and dosing of cerium oxide additive nanoparticle in diesel. A surge of 2.1% in the brake thermal efficiency and downturn of 3% brake-specific fuel consumption when compared to standard diesel mode in the uncoated engine was discerned. Emission level of nitrogen oxide, carbon monoxide and hydrocarbon also underwent a considerable decline.     

Study of emission characteristics of a diesel engine using cerium oxide nanoparticle blended pongamia methyl ester

In this work cerium oxide (CeO₂) nanoparticle was added to pongamia methyl ester (PME) to study its impact on emission characteristics in a diesel engine. It was found that CeO₂ nanoparticles act as an oxygen shelter owing to its high surface energy content due to its huge surface to volume ratio which expedites the process of combustion. Cerium oxide nanoparticles were mixed with neat PME at a different dose of 50?ppm and 100?ppm on a mass basis. CeO₂ nanoparticles are mixed to biodiesel by means of ultrasonicator and magnetic agitator to make sure homogenous. A diesel engine was used for the experimental analysis and fuelled with neat PME, diesel, PME dozed with CeO₂ nanoparticles at 50?ppm (PMEA50) and 100?ppm (PMEA100). Experimental results revealed that nanoparticle had an affirmative effect on emissions of PME as CeO₂ nanoparticles acted as a catalyst of oxidation. Amid the fuels containing CeO₂ nanoparticles, PMEA100 showed an improvement in various emissions as compared to conventional fuels. CeO₂ nanoparticles were to be the superior oxidising catalyst as it could effectively reduce CO and HC emissions. NO_x emission reduced appreciably owing to the catalytic activity of CeO₂ nanoparticles.     

Effect of nano-fuel additive on performance and emission characteristics of the diesel engine using biodiesel blends with diesel fuel

ABSTRACT

Biodiesel as an alternative source of petroleum fuel could reduce the dependence on petroleum products and control pollution problems. These biofuels are derived from various sources and if directly used in the engine it will not completely burn and will cause an increase in the emission level. In this experiment, 20% of rubber seed oil (B20) blended with pure diesel fuel along with aluminium oxide (Al₂O₃) was used in the proportions of 10?, 20 and 30?ppm. The obtained experimental results showed that the brake thermal efficiency was increased and the engine emission was reduced. And the brake-specific fuel consumption was reduced, but the NO_x level increased at the proportion level at 10?ppm of nano additives. This experiment has been carried out in a single cylinder water-cooled engine connected to an electrical dynamometer without engine modification and the injection pressure and timings were maintained at the standard level designed for the engine. The dynamic energy of aluminium oxide blend with the biodiesel improved the combustion characteristics in the engine, and caused a reduction in carbon deposits by 44.8% in the cylinder wall.     

Emission reduction potential of using gas-to-liquid and dimethyl ether fuels on a turbocharged diesel engine

A study of engine performance characteristics and both of regulated (CO, HC, NO_x, and smoke) and unregulated (ultrafine particle number, mass concentrations and size distribution) emissions for a turbocharged diesel engine fueled with conventional diesel, gas-to-liquid (GTL) and dimethyl ether (DME) fuels respectively at different engine loads and speeds have been carried out. The results indicated that fuel components significantly affected the engine performance and regulated/unregulated emissions. GTL exhibited almost the same power and torque output as diesel, while improved fuel economy. GTL significantly reduced regulated emissions with average reductions of 21.2% in CO, 15.7% in HC, 15.6% in NO_x and 22.1% in smoke in comparison to diesel, as well as average reductions in unregulated emissions of total ultrafine particle number (N_tot) and mass (M_tot) emissions by 85.3% and 43.9%. DME can significantly increase torque and power, compared with the original diesel engine, as well as significantly reduced regulated emissions of 40.1% in HC, 48.2% in NO_x and smoke free throughout all the engine conditions. However, N_tot for DME is close to that for diesel. The reason is that the accumulation mode particle number emissions for DME are very low due to the characteristics of oxygen content and no C-C bond, which promotes the processes of nucleation and condensation of the semi-volatile compounds in the exhaust gas, as a result, a lot of nucleation mode particles produce.     

Effect of the addition of 1-pentanol on engine performance and emission characteristics of diesel and biodiesel fuelled single cylinder diesel engine

ABSTRACT

Bioalcohols have recently become one of the promising alternate fuels. Lower alcohols exhibit some problems like phase separation, stability issues, storage problems, corrosion etc. Hence, the addition of higher alcohols is regarded least-problematic and the concept of using higher alcohols as fuel blends is relatively new. In this article, the effects of the addition of higher alcohol (1-pentanol) on engine performance and emission characteristics are discussed. Two reference fuels (diesel and biodiesel derived from waste cooking oil) and two test fuels (blends of 20% of 1-pentanol and 80% of either diesel or biodiesel) are tested in a single cylinder compression ignition diesel engine for six load conditions (0, 4, 8, 12, 16, and 20?kg) at a constant speed of 1200?rpm. The engine performance and emission characteristics are determined and discussed.     

Emission and performance analysis of pentanol-diesel blends in unmodified diesel engine

ABSTRACT

In order to improve its performance and emission parameters, higher alcohols are mixed to neat diesel. Higher alcohol (Pentanol) has the capacity for oxygen enrichment during combustion process which put into the catalytic reaction and gets better the combustion process. Pentanol is blended with neat diesel at different measured volumes of 15%, 25% and 35%. Three blended fuels prepared by volume of 85% of diesel and 15% of pentanol (D85P15), 75% of diesel and 25% of Pentanol (D75P25) and 65% of diesel and 35% of Pentanol (D65P35) respectively. Effect of emission and performance parameters have been studied in an unmodified diesel engine propelled with pentanol-diesel blends at various proportions. Pentanol acts as a catalyst (oxidising) and it was helpful in reducing carbon monoxide and hydrocarbon emissions. It is found that a considerable reduction in NO_x emission and it also reduces fuel consumption which increases in brake thermal efficiency.     

Effects of hydrocarbon fuel extracted from waste transformer oil on a DI diesel engine

In this study, hydrocarbon fuel (HCF) was derived from waste transformer oil through a traditional base-catalysed trans-esterification process. The experimental investigations using its blends of 25%, 50%, 75%, 100% and diesel fuel were carried out separately. The HCF obtained from waste transformer oil is used in a direct injection (DI) diesel engine without any engine modification to evaluate its performance, emission and combustion characteristics. The results indicate that the engine operating on test fuel blends shows a marginal increase in brake thermal efficiency (BTE) with a significant reduction in smoke. Nitrous oxides (NO_x) emission was slightly higher for test fuel blends than for diesel. The results show that at maximum load conditions, 25% HCF reduces carbon monoxide, smoke and hydrocarbon emission by 50%, 31% and 10%, respectively, whereas 50% HCF shows a greater BTE than other blends and is 12% higher than that of the diesel fuel. The combustion characteristics of fuel blends closely followed those of standard diesel.     

Performance analysis of low heat rejection diesel engine,using Mahua oil bio fuel

In the present investigation, the effect of thermal barrier coated piston on the performance and emission characteristics of mahua-biodiesel-fuelled diesel engine was studied and compared with those of neat diesel fuel. The piston, cylinder walls and the valves of the engine were coated with 0.25?mm thickness of Al₂O₃ material without affecting the compression ratio of the engine. Experiments were conducted using diesel and biodiesel blend (B20) in the engine with and without coating. The results revealed that specific fuel consumption was decreased by 8.5% and the brake thermal efficiency was increased by 6.2% for biodiesel blend with coated engine compared with the base engine with neat diesel fuel. The exhaust emissions CO, NO_x and HC emissions were also decreased for biodiesel blend with coated engine compared with base engine.     

Effects of Nano additives on performance and emission characteristics of Mentha longifolia biodiesel

ABSTRACT

Sustainable development of natural resources in this technological world goes hand in hand with the issues like cleaner environment, plantation of oil providing trees, etc. The overall objective of the national mission is to increase the creation of national infrastructure for production of biodiesel through cultivation of Jatropha plant and processing of its oil. Therefore, the objective of this paper is to provide a clean economical solution to this problem. The use of biodiesel leads to reduction in NO_x, HC, CO₂ and CO, and increase in fuel consumption on diesel engine. The present diesel engine. The Nano particles were dispersed in the biodiesel. If the additives added in the biodiesel at appropriate proportion, it will helpful to increase the engine combustion and performance characteristics. Nano-additives reduce the fuel consumption and improve the thermal efficiency during combustion additives release the energy to the fuel. The current Investigation is to study the effect of Nano-fuel additives cerium oxide (CeO₂) the performance and emission characteristics of Mentha longifolia biodiesel in a single cylinder, four stroke.