Extraction Equilibria of 4-Hydroxypyridine using Di (2-ethylhexyl) Phosphoric Acid

Extractions of 4-Hydroxpyridine (4HP) from aqueous solutions using Di(2-ethylhexyl)phosphoric acid (D2EHPA) as extractant in 1-octanol and kerosene were studied. The factors that affected the distribution coefficient (D), such as equilibrium pH, the concentration of D2EHPA, and the type of diluents were discussed. The interaction mechanism between 4HP and D2EHPA was validated by infrared spectroscopic analysis. D increased with the increase of the concentration of D2EHPA and peak values appeared at equilibrium pH = 3.6–5.0. D in the polar diluent (1-octanol) was much higher than those in the non-polar diluent (kerosene). The extraction reaction was found to be a proton-transfer process and D2EHPA mainly reacted through its –OH with –N– of 4HP. The apparent reactive extraction equilibrium constants K ₁₁ and K ₁₂ were obtained by fitting the experimental data of extraction equilibrium. By comparing calculated D values from the proposed model with the experimental ones, the accuracy of the proposed model was examined.     

Synergistic Extraction of Trivalent Actinides by Mixtures of 1-Phenyl-3-methyl-4-benzoyl-pyrazolone-5 and Neutral Oxo Donors

Abstract

The synergistic extraction of trivalent actinides Am, Cm, Bk, and Cf with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 (HPMBP) and TBP or TOPO has been investigated in xylene at 30°C. With HPMBP alone, all four trivalent actinides form M(PMBP)₃· HPMBP-type self-adducts. Bk(III) shows an abnormally high extraction with HPMBP alone. With TBP or TOPO(S) as neutral donor, except in the Bk/HPMBP/TBP system where Bk(PMBP)₃· HPMBP·TBP was extracted, all metal ions were extracted as M(PMBP)₃·S and M(PMBP)₃·(S)₂ into the organic phase. The equilibrium constants (β₁, β₂, and K ₂ for the organic phase synergistic reactions have been calculated. The β₁, β₂ values for Bk(III)/HPMBP/TOPO system are much lower as compared to the corresponding values for other trivalent actinides. The reasons for this extraordinary behavior of Bk(III) have been discussed. The extraction behavior of the M(III)/HPMBP/S and the M(III)/HTTA/S systems has also been compared.     

Synergistic Solvent Extraction of Lanthanides(III) with Mixtures of 4-benzoyl-3-methyl-1-phenylpyrazol-5-one and Some Novel Carbamoyl- and Phosphorylmethoxymethylphosphine Oxides

The solvent extraction of La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y from weak acidic hydrochloric acid solutions into an organic phase containing 4-benzoyl-3-methyl-1-phenylpyrazol-5-one (HP) and neutral tridentate organophosphorus ligands R₂P(O)CH₂OCH₂C(O)NBu₂ R = Bu (I), R = Ph (II) and R₂P(O)CH₂OCH₂P(O)R¹₂ R = R¹ = Bu (III); R = Bu, R¹ = Ph (IV); R = R¹ = Ph(V) has been studied. A considerable synergistic effect was observed in the presence of HP in the organic phase containing tetraoctyldiglycolamide (TODGA) and neutral organophosphorus ligands I - V. A successive replacement of C(O)NAlk₂ groups in the diglycolamide extractant molecule by P(O)Ph₂ groups leads to an increase in the extraction efficiency of Ln(III) ions when toluene was used as diluent. Phosphoryl-containing podand I possess a higher extraction efficiency towards Ln(III) ions than TODGA. The extraction equilibrium was investigated and the equilibrium constants were calculated. It was found that the lanthanide(III) ions are extracted as LnLP₃ and LnL₂P₃ complexes with mixtures of HP and I in toluene from weak acidic solutions.     

Solvent extraction of Eu3+ with 4-oxaheptanediamide into ionic liquid system

ABSTRACT

Liquid–liquid extraction of Eu³⁺ from aqueous solution with 4-oxaheptanediamides (OHAs) as extractant into room temperature ionic liquids (RTILs) of 1-alkyl-3-methylimidazolium hexafluorophosphate (C_nmim⁺PF₆^–, n = 4, 6 and 8) was investigated. The strong affinity of OHAs to Eu³⁺ was observed in the present C_nmim⁺PF₆^– system. The extraction was assumed to proceed by cation-exchange mechanism and formed a 4:1 complex of the OHA extractants and Eu³⁺ in C₄mim⁺PF₆^– system. The preferable composition of extracted species was presumed to be Eu(OHA)₄(H₂O)₄(PF₆)₃ by ESI-MS.     

Synergistic extraction of rare earths(III) from chloride medium with mixtures of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate

The synergistic effect of 1‐phenyl‐3‐methyl‐4‐benzoyl‐pyrazalone‐5 (HPMBP, HA) and di‐(2‐ethylhexyl)‐2‐ethylhexylphosphonate (DEHEHP, B) in the extraction of rare earths (RE) from chloride solutions has been investigated. Under the experimental conditions used, there was no detectable extraction when DEHEHP was used as a single extractant while the amount of RE(III) extracted by HPMBP alone was also low. But mixtures of the two extractants at a certain ratio had very high extractability for all the RE(III). For example, the synergistic enhancement coefficient was calculated to be 9.35 for Y³⁺, and taking Yb³⁺ and Y³⁺ as examples, RE³⁺ is extracted as RE(OH)A₂.B. The stoichiometry, extraction constants and thermodynamic functions such as Gibbs free energy change ΔG (?17.06 kJ mol^?1), enthalpy change ΔH (?35.08 kJ mol^?1) and entropy change ΔS (?60.47 J K^?1 mol^?1) for Y³⁺ at 298 K were determined. The separation factors (SF) for adjacent pairs of rare earths were calculated. Studies show that the binary extraction system not only enhances the extraction efficiency of RE(III) but also improves the selectivity, especially between La(III) and the other rare earth elements. Copyright © 2006 Society of Chemical Industry     

Solvent extraction studies of Sm(III) from nitrate medium and separation factors of rare earth elements with mixtures of sec‐octylphenoxyacetic acid and 1,10‐phenthroline

BACKGROUND: Liquid–liquid extraction is widely used for the separation of rare earths, among which synergistic extraction has attracted more and more attention. Numerous types of synergistic extraction systems have been applied to rare earths with high extraction efficiency and selectivities. In the present study, mixtures of sec‐octylphenoxyacetic acid (CA12, H₂A₂) and 1,10‐phenanthroline (phen, B) have been used for the extraction of rare earths from nitrate medium. The stoichiometry of samarium(III) extraction has been studied using the methods of slope analysis and constant molar ratio. The possibility of using synergistic extraction effects to separate rare earths has also been studied. RESULTS: Mixtures of CA12 and phen display synergistic effects in the extraction of rare earth elements giving maximum enhancement coefficients of 5.5 (La); 13.7 (Nd); 15.9 (Sm); 24.5 (Tb); 45.4 (Yb) and 12.3 (Y). Samarium(III) is extracted as SmHA₄B₃ with mixtures of CA12 and phen instead of SmHA₄ when extracted with CA12 alone. The calculated logarithm of the equilibrium constant is 6.0 and the thermodynamic functions, ΔH, ΔG, and ΔS, have been calculated as 4.3 kJ mol^?1, ? 33.7 kJ mol^?1 and 129.7 J mol^?1 K^?1, respectively. CONCLUSION: Mixtures of CA12 and phen exhibit synergistic effects on rare earth elements. Graphical and numerical methods have been successfully used to determine their stoichiometries. The different synergistic effects may provide the possibility of separating yttrium from heavy lanthanoids at an appropriate ratio of CA12 and phen. Copyright © 2010 Society of Chemical Industry     

Synthesis,extraction, and anti‐bacterial studies of some new bis‐1,2,4‐triazole derivatives part I

A series of new bis triazole Schiff base derivatives (4) were prepared in good yields by treatment of 4‐amino‐3,5‐diphenyl‐4H‐1,2,4‐triazole (3) with bisaldehydes (1). Schiff bases (4) were reduced with NaBH₄ to afford the corresponding bisaminotriazoles (5). All the new compounds were characterized by IR, ¹H NMR and ¹³C NMR spectral data. Their overall extraction (log K_ex) constants for 1 : 1 (M : L) complexes and CHCl₃/H₂O systems were determined at 25 ± 0.1°C to investigate the relationship between structure and selectivity toward various metal cations. The extraction equilibrium constants were estimated using CHCl₃/H₂O membrane transfer with inductively coupled plasma‐atomic emission spectroscopy spectroscopy. The stability sequence of the triazole derivatives in CHCl₃ for the metal cations was exhibited a characteristic preference order of extractability to metal ions [Fe(III) > Cu(II) > Pb(II) > Co(II) > Ni(II) > Mn(II) > Zn(II) > Mg(II) > Ca(II)]. The compounds were tested for anti‐microbial activity applying agar diffusion technique for 11 bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,Crystal Structure,and Thermal Behavior of 3‐(4‐Aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF)

The energetic material 3‐(4‐aminofurazan‐3‐yl)‐4‐(4‐nitrofurazan‐3‐yl)furazan (ANTF) with low melting‐point was synthesized by means of an improved oxidation reaction from 3,4‐bis(4′‐aminofurazano‐3′‐yl)furazan. The structure of ANTF was confirmed by ¹³C NMR spectroscopy, mass spectrometry, and the crystal structure was determined by X‐ray diffraction. ANTF crystallized in monoclinic system P2₁/c, with a crystal density of 1.785 g cm⁻³ and crystal parameters a=6.6226(9) Å, b=26.294(2) Å, c=6.5394(8) Å, β=119.545(17)°, V=0.9907(2) nm³, Z=4, μ=0.157 mm⁻¹, F(000)=536. The thermal stability and non‐isothermal kinetics of ANTF were studied by differential scanning calorimetry (DSC) with heating rates of 2.5, 5, 10, and 20 K min⁻¹. The apparent activation energy (E_a) of ANTF calculated by Kissinger's equation and Ozawa's equation were 115.9 kJ mol⁻¹ and 112.6 kJ mol⁻¹, respectively, with the pre‐exponential factor lnA=21.7 s⁻¹. ANTF is a potential candidate for the melt‐cast explosive with good thermal stability and detonation performance.     

THE EXTRACTION OF NEPTUNIUM(V) BY METHYLTRIOCTYLAMMONIUM CHLORIDE AND 1-PHENYL-3-METHYL-4-BENZOYL-5-PYRAZOLONE

The synergistic effect of methyltrioctylammonium chloride (QCI) on the extraction of Np(V) by 1-phenyl-3-methyl-4-benzoyl-pyrazolone(HP) in benzene is studied over the pH range 2-6. This system extracts Np(V) better than any previously reported. The interaction of the extractants and monomer-dimer equilibria affect the distribution behavior of Np(V) in a complicated manner. Analysis of the results suggests that NpO₂ ⁺ (M⁺) is extracted as mixed dimers, (QMP₂QCl)_o and (QMP₂QP)_o.     

Synergistic Effects in the Extraction of Uranium(VI) by Di-4-octylphenyl Phosphoric Acid

Abstract

The extraction of uranium(VI) from sulfuric acid solutions by di-4-octylphenyl phosphoric acid (DOPPA) is enhanced by the addition of neutral organophosphorus compounds due to synergistic action. The effect of tri-n-butyl phosphate (TBP), dibutylbutyl phosphonate (DBBP), and tri-n-octyl phosphine oxide (TOPO) was studied. The synergistic effect increased in this order. In the case of TBP and DBBP the extraction coefficient for U(VI) decreased with increasing concentration of synergistic agent after reaching a maximum. With TOPO, on the other hand, there was an increase even after this limit. This was because of the extraction of uranium by TOPO itself. The effect of uranium loading in the organic phase on the synergistic behavior was studied and the results were compared with those obtained with di-2-ethylhexyl phosphoric acid (DEHPA) in the presence of the same synergistic agents. The results with these two extractants indicate that with TOPO the synergism is mainly due to the formation of substitution products of the type UO₂A₂B₂ and with TBP addition products of the type UO₂(HA₂)₂B.     

Studies on the solvent extraction of rare earths from nitrate media with a combination of di‐(2‐ethylhexyl)phosphoric acid and sec‐octylphenoxyacetic acid

BACKGROUND: Di‐(2‐ethylhexyl)phosphoric acid (D2EHPA, H₂A₂) has been used extensively in hydrometallurgy for the extraction of rare earths, but it has some limitations. Synergistic extraction has attracted much attention because of its enhanced extractabilities and selectivities. In the present study, sec‐octylphenoxyacetic acid (CA12, H₂B₂) was added into D2EHPA systems for the extraction and separation of rare earths. The extraction mechanism of lanthanum with the mixtures and the separation of lanthanoids and yttrium were investigated. RESULTS: The synergistic enhancement coefficient for La³⁺ extracted with D2EHPA + CA12 was calculated as 3.63. La³⁺ was extracted as La(NO₃)₂H₂A₂B with the mixture. The logarithm of the equilibrium constant was determined as 0.80. The thermodynamic functions, ΔH, ΔG, and ΔS were calculated to be 4.03 kJ mol^?1, ? 1.96 kJ mol^?1, and 20.46 J mol^?1 K^?1, respectively. The mixtures have synergistic effects on Ce³⁺, Nd³⁺, and Y³⁺, with an especially strong synergistic effect on Y³⁺. Neither synergistic nor antagonistic effects on Dy³⁺ and weak antagonistic effects on Lu³⁺ were found. CONCLUSION: Mixtures of D2EHPA and CA12 exhibit evident synergistic effects when used to extract La³⁺ from nitric solution. The stoichiometries of the extracted complexes have been determined by graphical and numerical methods to be La(NO₃)₂H₂A₂B with the mixture. The extraction is an endothermic process. The mixture exhibits different extraction effects on rare earths, which provides possibilities for the separation of Y³⁺ from Ln³⁺ at a proper ratio of D2EHPA and CA12. Copyright © 2008 Society of Chemical Industry     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry     

Synergistic Solvent Extraction and Separation of Lanthanide(III) Ions with 4‐Benzoyl‐3‐Phenyl‐5‐Isoxazolone and the Quaternary Ammonium Salt

The solvent extraction of the lanthanide(III) ions (without Pm) with a 4‐benzoyl‐3‐phenyl‐5‐isoxazolone(HPBI) alone and in the presence of the quaternary ammonium salt Aliquat 336 in perchlorate form (QClO₄) in C₆H₆ was investigated by the slope analysis method. The composition of the extracted species was determined as Ln(PBI)₃ and Q[Ln(PBI)₄] (Q⁺ is the quaternary ammonium salt cation). The values of the equilibrium constant were calculated. Synergistic effects were found for all lanthanide metals when they were extracted with a binary mixture of HPBI and QClO₄. The influence of the synergistic agent on the extraction process has been discussed. The parameters of the extraction process were determined. The separation factors between adjacent metals were evaluated.     

Extraction of Uranium(VI) and Thorium(IV) from Nitric Acid Solution by N,N,N′,N′ – Tetraoctylglutaricamide

Synthesis and characterization of N,N,N′,N′-tetraoctylglutaricamide (TOGA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time, temperature, and types of diluents) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.0TOGA and Th(NO₃)₄·1.5TOGA. The apparent equilibrium constant of U(VI) and Th(IV) extraction determined are 3.35 ± 0.03 L³/mol³ and 1.87 ± 0.01 L⁵/mol⁵ at 298 ± 1 K. Thermodynamic parameters such as the free energy(ΔG), enthalpy(ΔH), and entropy(ΔS) changes associated with the extraction processes could be evaluated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Novel fluorescent porous hyperbranched aromatic polyamide containing 1,3,5‐triphenylbenzene moieties: Synthesis and characterization

In this thesis, two novel porous hyperbranched poly(1,3,5‐tris(4‐carboxyphenyl) benzene p ‐phenylenediamine) amides with different terminal functional groups are synthesized through an A₂ + B₃ approach using 1,3,5‐tri(4‐carboxyl phenyl) benzene (H₃BTB) and p ‐phenylenediamine as raw material, N ‐methyl‐pyrrolidone as solvent, triphenyl phosphite and pyridine as dehydrating agent, by means of regulating the mole ratio of the monomers. The chemical structures of the prepared hyperbranched polymers are characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR) analysis. These two polymers can be soluble in dimethyl sulfoxide (DMSO) and N ,N ‐dimethyl formamide (DMF). Their DMSO solutions exhibit strong blue fluorescence, especially for the amino terminated polymer HP‐NH₂. While in DMF solution, the two polymers emit strong green fluorescence. These two polymers are porous polymers with the Brunauer?Emmett?Teller surface areas of 4.53 and 24.52 m²/g for HP‐COOH and HP‐NH₂, respectively. They are potential useful in the areas of storage, separation, catalysis, and light emitting. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44505.     

Nonisothermal crystallization kinetics of PLA/nanosized YVO4 composites as a novel nucleating agent

The influence of nanosized YVO₄ particles as a novel and efficient nucleating agent on the nonisothermal crystallization behaviors of poly(lactic acid) (PLA) was studied. A modified Avrami model was utilized to describe the nonisothermal crystallization kinetics of pure PLA and PLA nanocomposites. The differential isoconversional Friedmann formula was employed to calculate the effective activation energies (E_X(t) ) of nonisothermal crystallization from the glass state. The results showed that modified Avrami methods describe the nonisothermal crystallization kinetics of pure PLA and PLA nanocomposites well. The crystallization rate of PLA/1 mass% YVO₄ was faster than that of pure PLA sample by factor 5 × 10³ at a heating rate of 1 K min⁻¹. While the values of Lauritzen–Hoffman parameters (K_g and U*) of the PLA/YVO₄ nanocomposites were lower than those of pure PLA, indicating the nucleation efficiency of nanosized YVO₄ particles for PLA. Scanning electron microscopy images reflect the uniform dispersion of 1 mass% YVO₄ in PLA matrix. Thermogravimetric analysis results revealed that the thermal degradation parameters are slightly lowered by 7 °C on increasing the mass percentage of YVO₄ in the PLA nanocomposites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48340.     

Nucleophilic Displacement Polymerlzation of N,N'-BIS(p-Chlorobenzylidine)-4, 4'-Diaminodiphenyl Ether with Sodium Sulfide

A novel poly(Schiff-base sulfide) polymer was synthesized by nucle-ophilic displacement polymerization of N,N'-bis(p-chlorobenzylidine)-4, 4'-diaminodiphenyl ether with sodium sulfide in anhydrous condition. The resulting polymer was soluble in some aprotic solvents having inherent viscosity of 0.18 dL/g in dimethylacetamide at 30°C. The monomer and the polymer were characterized by elemental analysis, infrared, and ¹H NMR (nuclear magnetic resonance) spectroscopy. The thermal characteristics of the polymer were also studied by thermo-gravimetric analysis and differential scanning calorimetry. The temperature of 10% weight loss, glass transition temperature (T _g). and crystalline melting point (T _m) of the polymer were found to be 420, 91.89, and 38575°C respectively.     

Synergistic Extraction of Trivalent Actinides by Mixtures of Thenoyltrifluoroacetone and Neutral Oxo Donors

Abstract

The synergistic extraction of trivalent actinides Am, Cm, Bk, and Cf has been studied by mixtures of HTTA and TOPO as well as DOSO in xylene at 30°C. HTTA-S (TOPO, DOSO) interaction corrections have been applied to calculate the “free” S concentrations in the organic phase. In the extraction of trivalent actinides, the third-power dependence on [HTTA]_org at a fixed [S]_org has been observed only after applying this correction. The synergistic species M(TTA)₃.S and M(TTA)₃.2S were found to be extracted into the organic phase whose stability constants (β₁, β₂, and K ₂) have been evaluated. Extraction by HTTA + S(S = TOPO, DOSO, TBP, TBTP) shows the order of extraction to be Tm > Cf > Bk > Eu > Pm > Am > Cm for the trivalent ions. The Am/Cm separation factor with the synergistic mixtures is ～3 whereas with HTTA alone it is ～6 when they are extracted from the chloroacetate buffer.     

Synergistic Solvent Extraction of Lanthanides (III) with Mixtures of Tetraphenylmethylenediphosphine Dioxide and Picrolonic Acid from HCl Solutions

The solvent extraction of lanthanides(III) from hydrochloric acid solutions into the organic phase containing neutral bidentate extractant tetraphenylmethylenediphosphine dioxide (L) and picrolonic acid (HP) has been studied. A considerable synergistic effect was observed in the presence of HP in the organic phase containing neutral bidentate organophosphorus ligand. The extraction equilibrium was investigated and the equilibrium constants were calculated. It was found that the lanthanide(III) ions are extracted from weak acidic solutions as LnP₃L and LnP₃L₂ complexes. The mixture L–HP offers higher extraction efficiency toward Ln(III) than mixtures of L with 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 or picric acid.     

High‐temperature piezoelectric properties of 0‐3 type CaBi4Ti4O15:x wt%BiFeO3 composites

The 0‐3 type CaBi₄Ti₄O₁₅:30 wt%BiFeO₃ composite shows much better high‐temperature piezoelectric properties than the single‐phase CaBi₄Ti₄O₁₅ or BiFeO₃ ceramics. The composite with 0‐3 type connectivity exhibits a high density of 7.01 g/cm³, a saturated polarization of 21.5 μC/cm² and an enhanced piezoelectric d₃₃ of 25 pC/N. After the poled composite was annealed at 600°C, its d₃₃ is 21 pC/N at room temperature. Resistance of the composite decreases slowly from 10⁹ ohm at 20°C to ~10⁵ ohm at 500°C. Furthermore, the poled composite shows strong radial and thickness dielectric resonances at 20°C‐500°C.