首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 874 毫秒
1.
This paper proposes an adaptive sliding mode super-twisting differentiator which allows the gains to adapt based on the ‘quality’ of the sliding motion. A Lyapunov based analysis for the adaptive super-twisting scheme is presented to demonstrate its properties. As an example, the adaptive differentiator proposed in this paper has been used as part of a nonlinear FDI scheme for an Oscillatory Failure Case (OFC) in an actuator. The FDI scheme requires an estimate of the rod speed which is provided by the adaptive super-twisting differentiator. Due to the conditions in which the actuator operates, normally the differentiator gains are initialised at low values to ensure good rod speed estimation in fault free conditions. However for large amplitude/frequency OFCs, the gains must adapt in order to maintain sliding and provide a good estimation. Simulations on a high fidelity nonlinear aircraft benchmark model have been carried out for both liquid and solid OFCs.  相似文献   

2.
A novel super-twisting adaptive sliding mode control law is proposed for the control of an electropneumatic actuator. The key-point of the paper is to consider that the bounds of uncertainties and perturbations are not known. Then, the proposed control approach consists in using dynamically adapted control gains that ensure the establishment, in a finite time, of a real second order sliding mode. The important feature of the adaptation algorithm is in non-overestimating the values of the control gains. A formal proof of the finite time convergence of the closed-loop system is derived using the Lyapunov function technique. The efficiency of the controller is evaluated on an experimental set-up.  相似文献   

3.
ABSTRACT

This paper presents an adaptive gain algorithm for second-order sliding-mode control (2-SMC), specifically a super-twisting (STW)-like controller, with uniform finite/fixed convergence time, that is robust to perturbations with unknown bounds. It is shown that a second-order sliding mode is established as exact finite-time convergence to the origin if the adaptive gain does not have the ability to get reduced and converge to a small vicinity of the origin if the adaptation algorithm does not overestimate the control gain. The estimate of fixed convergence time of the studied adaptive STW-like controller is derived based on the Lyapunov analysis. The efficacy of the proposed adaptive algorithm is illustrated in a tutorial example, where the adaptive STW-like controller with uniform finite/fixed convergence time is compared to the adaptive STW controller with non-uniform finite convergence time.  相似文献   

4.
This paper presents a new discrete-time super-twisting sliding mode observer with variable gains for sensorless nonsinusoidal vector control of permanent magnet synchronous motors. This observer is adopted to estimate the back electromotive forces (back-EMF) that are required for the rotor speed estimation and for the nonsinusoidal vector control. In addition, their gains are time-varying to minimize the chattering. So, they are adjusted based on internal states of the super-twisting algorithm. The stability analysis is investigated from the Lyapunov theory for discrete-time systems. Finally, simulation and experimental results are presented to demonstrate the good performance and the effectiveness of the proposed observer.  相似文献   

5.
针对传统的滑模观测器在实现故障估计时带来的抖振问题,设计基于super-twisting算法的二阶滑模观测器以稳定地估计出故障。针对以往利用几何或齐次性方法证明super-twisting算法稳定性过程繁琐的缺点,采用Lyapunov函数来证明稳定性。给出的故障估计结果克服了传统的滑模观测器在估计故障时带来的时延或引进新参数等缺点。最后,将所提出的方法应用于某型飞控系统,结果表明了所提出方法的有效性。  相似文献   

6.
ABSTRACT

A new approach to the solution of what is termed causal output tracking problem for linear time-invariant systems in the presence of both matched and unmatched unmodelled disturbances is presented. The proposed solution is addressed through the design of a dynamic steady state estimator based on the desired system structure and an observer, considering the reference as the system output. The unmatched disturbance is estimated and used in the steady state estimator to achieve invariance, while the matched disturbance robustness is provided via sliding mode control using the super-twisting algorithm. A useful application of the presented techniques is output tracking for non-minimum phase systems; thus, the performed simulation results confirm the effectiveness of the proposed control scheme for this kind of systems.  相似文献   

7.
This paper develops an adaptive super-twisting global nonlinear sliding mode control technique for n-link rigid robotic manipulators. A novel control law is designed to guarantee elimination of the reaching phase and existence of the sliding mode around the surface right from the initial time. Furthermore, the adaptive tuning law eliminates requirement of the knowledge about the upper bounds of external disturbances. By using the proposed method, a robust controller is designed so that the tracking error of rigid manipulator is convergent to the global nonlinear sliding surface in a finite time, and strong robustness with respect to large uncertainties and disturbances is guaranteed. Illustrative simulations on a two-link elbow robot manipulator and a three degree of freedom rigid manipulator are presented to show the robustness and effectiveness of the suggested design compared to other method. Moreover, a simulation as well as experimental study of a rotary inverted pendulum system demonstrates the applicability of the proposed method.  相似文献   

8.
ABSTRACT

This paper proposed a new adaptive integral sliding mode FTC scheme to deal with the actuator faults and failure. The scheme combines integral sliding mode control, control allocation scheme and adaptive strategy. The unknown actuator faults are handled by adaptive modulation gain of nonlinear ISMC law. To cope with complete failure, control allocation scheme is integrated with the baseline controller to provide tolerance. The proposed strategy relies on the estimate of actuator effectiveness. Therefore, an adaptive sliding mode observer based fault reconstruction scheme is proposed in this paper. The proposed scheme is implemented on dissimilar redundant actuation system driven by hydraulic and electro-hydraulic actuators. In nominal and faulty conditions, both actuators are contributing to achieving the desired control surface deflection. However, when the actuator failure occurs, the control signals are reallocated to the redundant actuator. The problem of dynamics mismatch is addressed using fractional order controller designed in an inner loop. The comparison with the existing literature is also conducted in the simulation to validate the dominant performance.  相似文献   

9.
In this paper, two adaptive iterative learning control schemes, proposed by A. Tayebi [2004, Automatica, 40(7), 1195–1203], are tested experimentally on a five-degrees-of-freedom (5-DOF) robot manipulator CATALYST5. The control strategy consists of using a classical PD feedback structure plus an additional iteratively updated term designed to cope with the unknown parameters and disturbances. The control implementation is very simple in the sense that the knowledge of the robot parameters is not needed, and the only requirement on the PD and learning gains is the positive definiteness condition. Furthermore, in contrast with classical ILC schemes where the number of iterative variables is generally equal to the number of control inputs, the adaptive control schemes tested in this paper involve just one or two iterative variables.  相似文献   

10.
ABSTRACT

Asymptotical sliding mode-model reference adaptive control design for a class of systems with parametric uncertainty, unknown nonlinear perturbation and external disturbance, and with known input and state delays is proposed. To overcome the difficulty to directly predict the plant state under uncertainties, a control design is based on a developed decomposition procedure, where a ‘generalised error’ in conjunction with auxiliary linear dynamic blocks with adjustable gains is introduced and the sliding variable is formed on the basis of this error. The effect of such a decomposition is to pull the input delay out of first step of the design procedure. As a result, similarly to the classical Smith predictor, the adaptive control architecture based only on the lumped-delays, i.e. without conventional in such cases difficult-implemented distributed-delay blocks. Two new adaptive control schemes are proposed. A linearisation-based control design is constructed for feedback control of an urban traffic region model with uncertain dynamics. Simulation results demonstrate the effectiveness of the developed adaptive control method.  相似文献   

11.
永磁同步电机无位置传感器控制技术通常使用滑模观测器观测反电动势,进而获取转子位置和速度信息.为提升滑模观测器的性能,本文设计了一种改进型自适应超螺旋滑模观测器.首先,文章在超螺旋滑模观测器结构中增加观测误差的线性项,以提高观测器的动态性能.接着,为解决观测器增益在不同速域下参数不匹配的问题,本文提出一种观测器参数自适应调整策略,提升了观测器参数鲁棒性.在此基础上,采用同步参考系滤波器滤除输出信号的高次谐波,进一步提高观测精度.最后,仿真结果表明,与传统方法相比,本文提出的方法观测性能更好,鲁棒性更强.  相似文献   

12.
张谦  李东 《控制与决策》2019,34(7):1385-1393
针对表贴式永磁同步电机无位置传感器矢量控制系统, 提出一种具有电机参数在线辨识的基于Super-twisting algorithm的自适应二阶滑模观测器.在两相静止坐标系下,将模型参考自适应方法与基于Super-twisting algorithm的二阶滑模方法相结合,实现反电动势的准确估计.采用李亚普诺夫理论证明观测器的稳定性,并由李亚普诺夫稳定性方程推导定子电阻和转子转速的自适应律.在同步旋转坐标系下,采用二阶滑模观测器估计永磁磁链,并将其输入位置跟踪观测器估计转子位置.该算法充分抑制了滑模抖振,同时避免了低通滤波和相位补偿环节的使用,转子位置检测不受定子电阻和永磁磁链变化的影响,具有较强的鲁棒性.仿真结果验证了所提出算法的有效性.  相似文献   

13.
This paper studies the speed tracking control of networked control systems (NCSs) with external disturbance and false data injection (FDI) attacks. First, the system model with external disturbances and FDI attacks is built. Then, an extended observer based on discrete time sliding function and neural network (NN) is proposed to observe the extended states and suppress the effect of external disturbance and FDI attacks. Furthermore, a novel hybrid discrete-time sliding mode control (HDSMC) strategy combining discrete time sliding mode control with super-twisting control is designed to perform closed-loop control of the system, in which the exponential term and nonlinear term are constructed to restrain the jitters. The convergence and reachability of the sliding motion are proofed. Finally, the validity and feasibility of the proposed methods are proved by simulations and experiments.  相似文献   

14.
This paper investigates the adaptive tracking control of second‐order nonlinear systems with nonlinearly parameterized uncertainties and disturbances, as well as multiplicative uncertainty in the control coefficient matrix. A novel adaptive function augmented sliding mode control approach is proposed such that the tracking error converges to a neighborhood of zero with the preassigned size within the preassigned settling time. In the proposed control scheme, the control gains increase as the adaptive estimate values increase only when necessary, that is, when the current control gains are not big enough to suppress the uncertainties or disturbances; as a result, the conservativeness of control design caused by unnecessary high control gains can be effectively reduced. Moreover, the chattering phenomenon well known in the sliding mode control is eliminated by using the saturation function to replace the signum function, and the possible persistent increasing problem of the adaptive estimate values due to measurement disturbances or noises on the feedback is also well addressed by introducing “dead‐zone” nonlinearities in the adaptive laws. In addition, an improved method to construct the desired error trajectory is proposed, and this method could avoid the large undershoot‐like or overshoot‐like phenomena, which the traditional one may result in. The obtained results are finally applied to the motion control of the underwater vehicle and the rendezvous control of spacecraft, and the simulation results illustrate the effectiveness and the advantages of the proposed control approach.  相似文献   

15.
李俊麟  王宏博  张伟  高升 《测控技术》2023,42(10):74-81
针对机械臂系统存在的系统参数摄动、非线性摩擦及外部干扰等不确定问题,提出一种自适应反演超螺旋全局终端滑模轨迹跟踪控制方法。该方法基于反演法、Lyapunov理论和全局快速终端滑模理论设计控制器,保证系统稳定性及全局收敛性,增强系统的鲁棒性。为解决系统集总扰动上界未知的问题,采用自适应技术设计切换控制律,抵消不确定性的影响,同时引入超螺旋算法抑制滑模控制固有的抖振现象。最后,通过理论分析和仿真算例验证了该控制器的有效性与可行性。  相似文献   

16.
针对基于传统PI控制的表贴式永磁同步电机(SPMSM)直接转矩控制系统抖振和相位延迟等问题,在转速环节设计新型趋近律,采用模糊自适应方法,实现趋近律参数的动态调节,并通过Lyapunov方法证明稳定性.利用super-twisting滑模策略生成参考电压矢量,完成混合滑模控制器的设计,建立基于反正切函数的滑模观测器,并对转子位置进行合理补偿.仿真实验表明,与PI控制、基于指数趋近律的滑模控制器相比,所设计的控制器在电机空载起动和外加干扰情况下均能有效提高系统响应,显著降低抖振,与其他模型参考自适应观测器相比,所设计观测器能有效减小相位延迟,转子位置辨识结果更准确.  相似文献   

17.
ABSTRACT

In this paper, a Lyapunov-based control concept is presented that combines variable structure and adaptive control. The considered system class consists of nonlinear single input systems which are affected by matched structured and unstructured uncertainties. Resorting to the certainty equivalence principle, the controller exploits advantages of both the sliding-mode and the adaptive control methodology. It is demonstrated that the gains of the discontinuous control action may be reduced remarkably when compared with pure sliding-mode-based approaches. The efficiency of the presented concept is demonstrated in detail, using results of numerical simulations.  相似文献   

18.
为了提高永磁同步直线电机的跟踪性能,增强系统的鲁棒性,本文提出了分数阶超螺旋滑模控制策略.首先,针对外部扰动以及系统的未知状态设计广义超螺旋观测器,其能够精确估计永磁同步直线电机的速度和外部扰动.其次,将分数阶理论和终端滑模控制理论相结合,提出有限时间收敛的分数阶超螺旋滑模控制器,以实现永磁同步直线电机的跟踪控制.最后,通过仿真对比验证所提方案的有效性.  相似文献   

19.
一类具有未知死区MIMO系统的自适应模糊控制   总被引:6,自引:0,他引:6  
张天平  裔扬 《自动化学报》2007,33(1):96-100
针对一类具有未知死区并具有下三角函数控制增益矩阵的不确定MIMO非线性系统, 根据滑模控制原理, 并利用Nussbaum函数的性质, 提出了一种自适应模糊控制器的设计方案. 该方案取消了函数控制增益符号已知和死区模型参数上界、下界已知的条件. 通过引入积分型李亚普诺夫函数及最优逼近误差与死区扰动上界的自适应补偿项,证明了闭环系统是稳定的,跟踪误差收敛到零. 仿真结果表明了该方法的有效性.  相似文献   

20.
In this paper, first-order and second-order sliding mode controllers for underactuated manipulators are proposed. Sliding mode control(SMC) is considered as an effective tool in different studies for control systems. However, the associated chattering phenomenon degrades the system performance. To overcome this phenomenon and track a desired trajectory, a twisting, a supertwisting and a modified super-twisting algorithms are presented respectively. The stability analysis is performed using a Lyapunov function for the proposed controllers. Further, the four different controllers are compared with each other. As an illustration, an example of an inverted pendulum is considered. Simulation results are given to demonstrate the effectiveness of the proposed approaches.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号