Cobalt Nanoparticle Arrays made by Templated Solid‐State Dewetting

Self‐assembled cobalt particle arrays are formed by annealing, which cause agglomeration (dewetting) of thin Co films on oxidized silicon substrates that are topographically prepatterned with an array of 200‐nm‐period pits. The Co nanoparticle size and uniformity are related to the initial film thickness, annealing temperature, and template geometry. One particle per 200‐nm‐period pit is formed from a 15‐nm film annealed at 850 °C; on a smooth substrate, the same annealing process forms particles with an average interparticle distance of 200 nm. Laser annealing enables templated dewetting of 5‐nm‐thick films to give one particle per pit. Although the as‐deposited films exhibit a mixture of hexagonal close‐packed and face‐centered cubic (fcc) phases, the ordered cobalt particles are predominantly twinned fcc crystals with weak magnetic anisotropy. Templated dewetting is shown to provide a method for forming arrays of nanoparticles with well‐controlled sizes and positions.     

Self‐Assembly of CoPt Magnetic Nanoparticle Arrays and its Underlying Forces

Nanoparticles covered with surfactants are often used to study particle motion patterns and self‐assembly processes in solutions. Surfactants have influence on the interparticle interactions and therefore on the particle motion tracks and final patterns. In this study, CoPt nanoparticles are synthesized in aqueous solution without any surfactant. In situ transmission electron microscopy observation is performed to monitor the self‐assemble process. Two types of magnetic nanoparticle superlattice arrays are formed: hexagonal equal distance superlattice arrays when particle size is 3 nm, and tight unequal distance superlattice arrays when particle size is 4.5 nm. It is interesting to observe that two small arrays merge into a large one through rotational and translational movements. A Monte Carlo simulation is carried out which successfully restores the whole process. It is identified that the underlying forces are van der Waals and magnetic dipolar interactions. The latter is responsible for orientation of each particle during the whole process. This investigation leads to a better understanding of the formation mechanism of magnetic nanoparticle superlattice arrays.     

Tuning the Intensity of Metal‐Enhanced Fluorescence by Engineering Silver Nanoparticle Arrays

It is demonstrated that silver nanoparticle (SNP) arrays fabricated by combining nanoimprint lithography and electrochemical deposition methods can be used as substrates for metal‐enhanced fluorescence, which is widely used in optics, sensitive detection, and bioimaging. The method presented here is simple and efficient at controlling the nanoparticle density and interparticle distance within one array. Furthermore, it is found that the fluorescence intensity can be tuned by engineering the feature size of the SNP arrays. This is due to the different coupling efficiency between the emission of the fluorophores and surface plasmon resonance band of the metallic nanostructures.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.     

AuCu Alloy Nanoparticle Embedded Cu Submicrocone Arrays for Selective Conversion of CO2 to Ethanol

The CO₂ reduction reaction (CO₂RR) driven by renewable electricity represents a promising strategy toward alleviating the energy shortage and environmental crisis facing humankind. Cu species, as one type of versatile electrocatalyst for the CO₂RR, attract tremendous research interest. However, for C₂ products, ethanol formation is commonly less favored over Cu electrocatalysts. Herein, AuCu alloy nanoparticle embedded Cu submicrocone arrays (AuCu/Cu‐SCA) are constructed as an active, selective, and robust electrocatalyst for the CO₂RR. Enhanced selectivity for EtOH is gained, whose Faradaic efficiency (FE) reaches 29 ± 4%, while ethylene formation is relatively inhibited (16 ± 4%) in KHCO₃ aqueous solution. The ratio between partial current densities of EtOH and C₂H₄ (j_EtOH/j_C2H4) can be tuned in the range from 0.15 ± 0.27 to 1.81 ± 0.55 by varying the Au content of the electrocatalysts. The combined experimental and theoretical calculation results identify the importance of Au in modifying binding energies of key intermediates, such as CH₂CHO*, CH₃CHO*, and CH₃CH₂O*, which consequently modify the activity and selectivity (j_EtOH/j_C2H4) for the CO₂RR. Moreover, AuCu/Cu‐SCA also shows high durability with both the current density and FE_EtOH being largely maintained for 24 h electrocatalysis.     

Sensitivity Tuning through Additive Heterogeneous Plasmon Coupling between 3D Assembled Plasmonic Nanoparticle and Nanocup Arrays

Plasmonic substrates have fixed sensitivity once the geometry of the structure is defined. In order to improve the sensitivity, significant research effort has been focused on designing new plasmonic structures, which involves high fabrication costs; however, a method is reported for improving sensitivity not by redesigning the structure but by simply assembling plasmonic nanoparticles (NPs) near the evanescent field of the underlying 3D plasmonic nanostructure. Here, a nanoscale Lycurgus cup array (nanoLCA) is employed as a base colorimetric plasmonic substrate and an assembly template. Compared to the nanoLCA, the NP assembled nanoLCA (NP‐nanoLCA) exhibits much higher sensitivity for both bulk refractive index sensing and biotin–streptavidin binding detection. The limit of detection of the NP‐nanoLCA is at least ten times smaller when detecting biotin–streptavidin conjugation. The numerical calculations confirm the importance of the additive plasmon coupling between the NPs and the nanoLCA for a denser and stronger electric field in the same 3D volumetric space. Tunable sensitivity is accomplished by controlling the number of NPs in each nanocup, or the number density of the hot spots. This simple yet scalable and cost‐effective method of using additive heterogeneous plasmon coupling effects will benefit various chemical, medical, and environmental plasmon‐based sensors.     

Programmable Negative Differential Resistance Effects Based on Self‐Assembled Au@PPy Core–Shell Nanoparticle Arrays

The negative differential resistance (NDR) effect observed in conducting polymer/Au nanoparticle composite devices is not yet fully clarified due to the random and disordered incorporation of Au nanoparticles into conducting polymers. It remains a formidable challenge to achieve the sequential arrangement of various components in an optimal manner during the fabrication of Au nanoparticle/conducting polymer composite devices. Here, a novel strategy for fabricating Au nanoparticle/conducting polymer composite devices based on self‐assembled Au@PPy core–shell nanoparticle arrays is demonstrated. The interval between the two Au nanoparticles can be precisely programmed by modulating the thickness of the shell and the size of the core. Programmable NDR is achieved by regulating the spacer between two Au nanoparticles. In addition, the Au/conducting polymer composite device exhibits a reproducible memory effect with read–write–erase characteristics. The sequentially controllable assembly of Au@PPy core–shell nanoparticle arrays between two microelectrodes will simplify nanodevice fabrication and will provide a profound impact on the development of new approaches for Au/conducting polymer composite devices.     

Spherical Nanoparticle Arrays with Tunable Nanogaps and Their Hydrophobicity Enhanced Rapid SERS Detection by Localized Concentration of Droplet Evaporation

Periodic hexagonal spherical nanoparticle arrays are fabricated by a sacrificial colloidal monolayer template route by chemical deposition and further physical deposition. The regular network‐structured arrays are first templated by colloidal monolayers and then they are changed to novel periodic spherical nanoparticle arrays by further sputtering deposition due to multiple direction deposition and shadow effect between adjacent nanoparticles. The nanogaps between two adjacent spherical nanoparticles can be well tuned by controlling deposition time. Such periodic nanoparticle arrays with gold coatings demonstrate a very stable and high sensitive surface‐enhanced Raman scattering spectroscopy (SERS) performance. The periodic nanoparticle arrays with 10 nm gaps display much stronger SERS enhancement due to electromagnetic coupling. The chemically modified nanoparticle arrays show good hydrophobicity, which shorten process of detecting probe molecules using them as SERS‐active substrates by localized concentration of droplet evaporation and a low detection limit of 10⁻¹² m R6G can be achieved without solution wasting in a short time. The hydrophobic substrate offers a simple, convenient, and economical method to examine SERS performance by rapid concentration of solution on it and it is highly helpful to improve its practical applications in portable Raman detecting devices to detect organic molecules.