Study of dynamic mechanical properties of poly(vinyl chloride)–ethylene vinyl acetate copolymer and poly(vinyl chloride)–chlorinated ethylene vinyl acetate copolymer mixtures

The compatibility of the mixtures poly(vinyl chloride)—ethylene vinyl acetate copolymer and poly(vinyl chloride)—chlorinated ethylene vinyl acetate copolymer was studied by the method of dynamic mechanical testing. The character of G′ and G″ was confronted with the Takayanagi model. In all cases a limited compatibility of the components was observed.     

Improvement of compression set property of ethylene vinyl acetate copolymer/ethylene‐1‐butene copolymer/organoclay nanocomposite foams

To chemically bond polymer and organoclay, low molecular weight trimethoxysilyl‐modified polybutadiene (Silane) was used in this study. When Silane was added, ethylene‐vinyl acetate copolymer (EVA)/ethylene‐1‐butene copolymer (EtBC)/methyl tallow bis‐2‐hydroxyethyl quaternary ammonium‐modified montmorillonite (OH‐MMT)/Silane foams with and without maleic anhydride grafted EtBC (EtBC‐g‐MAH) display lower compression set than EVA/EtBC foams. According to the compression set result, OH‐MMT is more effective in improvement of compression set than dimethyl dihydrogenated tallow quaternary ammonium‐modified montmorillonite (DM‐MMT) because in addition of OH groups in the organoclay surface, the OH groups of the alkylammonium ion existed in interlayer of OH‐MMT may react with silanol group of Silane. The possible chemical reactions between Silanol groups of Silane and the hydroxyl groups of OH‐MMT and DM‐MMT were proved by ATR‐FTIR experiments. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.     

Structural investigations of poly(ethylene terephthalate)‐graft‐polystyrene copolymer films

Structural investigations of poly(ethylene terephthalate)‐graft‐polystyrene (PET‐g‐PS) films prepared by radiation‐induced grafting of styrene onto commercial poly(ethylene terephthalate) (PET) films were carried out by FTIR, X‐ray diffraction (XRD), and differential scanning calorimetry (DSC). The variation in the degree of crystallinity and the thermal characteristics of PET films was correlated with the amount of polystyrene grafted therein (i.e., the degree of grafting). The heat of melting was found to be a function of PET crystalline fraction in the grafted films. The grafting is found to take place by incorporation of amorphous polystyrene grafts in the entire noncrystalline (amorphous) region of the PET films and at the surface of the crystallites. This results in a decrease in the degree of crystallinity with the increase in the degree of grafting, attributed to the dilution of PET crystalline structure with the amorphous polystyrene, without almost any disruption in the inherent crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1949–1955, 2002; DOI 10.1002/app.10515     

Impact toughening of polypropylene by ethylene vinyl acetate copolymer

In this article we studied the potential of ethylene vinyl acetate copolymer (EVA) as an impact modifier for isotactic polypropylene (PP). PP/EVA blend in the range 0–40 wt % EVA content is studied by using three grades of EVA containing 9, 12, and 19 wt % VA. Izod impact strength measurements were made at temperatures ranging from liquid nitrogen temperature to 60°C to explore the impact-toughening effect as a function of blending ratio both at low and above ambient temperatures. The results are compared with various reported blends of PP with other elastomers. Morphological studies through scanning electron microscopy on etched impact-fractured surfaces are carried out and a correlation of morphology and impact properties at various blending ratios is presented. Finally, a mathematical analysis of the data is performed in terms of second-degree polynomial to express impact strength as a simultaneous function of two variables, and an equation is proposed that shows the best fit with the experimental data. Relevant contour diagrams, based on the proposed equation, for optimization of properties are also presented.     

Effect of particle size on flame retardancy of Mg(OH)2‐filled ethylene vinyl acetate copolymer composites

Four kinds of magnesium hydroxide (Mg(OH)₂) with different particle sizes are chosen and mixed with ethylene vinyl acetate copolymer (EVA) to investigate the effect of particle size on the flame retardancy of composites, which is evaluated by limiting oxygen index (LOI) testing, horizontal fire testing, and cone calorimeter. When Mg(OH)₂ filling level changes from 35 to 70 wt %, the composites filled with nano‐Mg(OH)₂ do not always possess the best flame retardancy, and among the composites filled with micro‐Mg(OH)₂, the composites filled with 800 mesh Mg(OH)₂ show the best flame retardancy; however, the composites filled with 1250 mesh presents the worst one. So the effect of particle size on the flame retardancy of micro‐Mg(OH)₂‐filled EVA is not linear as expected. All the differences are thought to result from both particle size effect and distributive dispersion level of Mg(OH)₂. To prepare the composites with better mechanical properties and flame retardancy, authors suggested that Mg(OH)₂ of smaller size should be chosen as flame retardant, and good dispersion of Mg(OH)₂ particles also should be assured. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4461–4469, 2006     

Morphological control of porous ethylene‐vinyl acetate copolymer membrane obtained from a co‐continuous ethylene‐vinyl acetate copolymer/poly(ϵ‐caprolactone) blend

Ethylene‐vinyl acetate copolymer (EVA)/poly(?‐caprolactone) (PCL) blend (50/50 w/w) with co‐continuous morphology was prepared via melt mixing for fabricating microporous EVA membrane materials through selective solvent extraction. Shear flow and quiescent annealing techniques were employed to control co‐continuous phase size in the EVA/PCL blend, and the time‐ and temperature‐dependent relations of phase size were then evaluated theoretically. Using these techniques, microporous EVA membrane materials with various pore sizes ranging from 2 µm to more than 200 µm were obtained. In contrast to the porous EVA membrane prepared by the traditional way of solvent casting/particulate leaching, the as‐obtained microporous membrane shows a higher level of interconnectivity and much narrower pore size distribution with uniform pore structure. © 2013 Society of Chemical Industry     

Methacrylate‐based nanoparticles produced by microemulsion polymerization

Nanoparticles of methacrylate comonomers were obtained by microemulsion polymerization by using cetyltrimethylammonium bromide as the stabilizer. Stable and bluish transparent latexes were produced from these polymerizations in which potassium persulphate was used as the initiator. The viscosity average molecular weights were in between 6 × 10⁵ and 1.25 × 10⁶. The average diameters of the latex particles were in the range of 20–40 nm, which was obtained by scanning tunneling microscopy. The average particle diameter increased both with an increase in the relative amount of the comonomers and their type. The glass transition temperatures of these polymers obtained by DSC were in the range of 30–103°C, and decreased with the increase in the comonomer ratio. The comonomer ratios in the final copolymers were obtained from ¹H‐NMR spectra, which were smaller than those ratios used in the original recipes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 569–575, 2000     

Poly(ethylene oxide)‐block‐polystyrene copolymers obtained by radical polymerization involving chain‐transfer processes

Poly(ethylene oxide)‐block‐polystyrene (PEO–PSt) block copolymers were prepared by radical polymerization of styrene in the presence of iodoacetate—terminated PEO (PEO‐I) as a macromolecular chain‐transfer agent. PEO‐I was synthesized by successively converting the OH end‐group of α‐methoxy ω‐hydroxy PEO to chloroacetate and then to the iodoacetate. The chain‐transfer constant of PEO‐I was estimated from the rate of consumption of the transfer agent versus the rate of consumption of the monomer (C_{tr, PEO‐I} = 0.23). Due to the involvement of degenerative transfer, styrene polymerization in the presence of PEO‐I displayed some of the characteristics of a controlled/‘living’ process, namely an increase in the molecular weight and decrease of polydispersity with monomer conversion. However, because of the slow consumption of PEO‐I due to its low chain‐transfer constant, this process was not a fully controlled one, as indicated by the polydispersity being higher than in a controlled polymerization process (1.65 versus < 1.5). The formation of PEO–PSt block copolymers was confirmed by the use of size‐exclusion chromatography and ¹H NMR spectroscopy. Copyright © 2004 Society of Chemical Industry     

Preparation of narrowly distributed nanoparticles of poly(n‐butyl methacrylate‐co‐vinyl pyrrolidone) through microemulsion polymerization

Narrowly distributed nanoparticles of poly (n‐butyl methacrylate‐co‐vinyl pyrrolidone) were prepared through microemulsion polymerization with a nonionic surfactant of Tween‐80 as emulsifier (6 wt % of the latex) and n‐butanol as coemulsifier. The polymerizations were initiated with benzoylperoxide (BPO), potassium persulfate (KPS), KPS/ferric sulfate (FeSO₄), and BPO/FeSO₄, respectively, where the initiation in the case of BPO/FeSO₄ took place mainly at the interphase between the oil phase and the reaction media. Namely, this interfacial‐initiated microemulsion polymerization resulted in larger particles with relatively narrower particle size distribution as well as higher limiting monomer conversion but lower polymerization rate compared with the polymerization initiated with KPS/FeSO₄. In this article, the influences of initiation method, monomer ratio, and addition of water‐soluble components on microemulsion polymerization and latex particle size were studied to discuss the mechanism of interfacial‐initiated microemulsion polymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2334–2340, 2004     

Crystallization behavior of PEO in blends of poly(ethylene oxide)/poly(2‐vinyl pyridine)‐b‐(ethylene oxide) block copolymer

The crystallization behavior of two molecular weight poly(ethylene oxide)s (PEO) and their blends with the block copolymer poly(2‐vinyl pyridine)‐b‐poly(ethylene oxide) (P2VP‐b‐PEO) was investigated by polarized optical microscopy, thermogravimetric analysis, differential scanning calorimetry, and atomic force microscopy (AFM). A sharp decreasing of the spherulite growth rate was observed with the increasing of the copolymer content in the blend. The addition of P2VP‐b‐PEO to PEO increases the degradation temperature becoming the thermal stability of the blend very similar to that of the block copolymer P2VP‐b‐PEO. Glass transition temperatures, T_g, for PEO/P2VP‐b‐PEO blends were intermediate between those of the pure components and the value increased as the content of PEO homopolymer decreased in the blend. AFM images showed spherulites with lamellar crystal morphology for the homopolymer PEO. Lamellar crystal morphology with sheaf‐like lamellar arrangement was observed for 80 wt% PEO(200M) and a lamellar crystal morphology with grain aggregation was observed for 50 and 20 wt% blends. The isothermal crystallization kinetics of PEO was progressively retarded as the copolymer content in the blend increased, since the copolymer hinders the molecular mobility in the miscible amorphous phase. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Miscibility and adhesive properties of ethylene vinyl acetate copolymer (EVA)‐based hot‐melt adhesives. I. Adhesive tensile strength

A series of ethylene vinyl acetate copolymers (EVA) were blended with some tackifier resins that are made from wood extracts, and possible relations between their miscibility and properties as hot‐melt adhesives (HMA) were investigated. From our previous report on miscibility of various EVA‐based HMAs, we chose some blends that represent some of typical miscibility types and measured their adhesive tensile strengths. When the blends were miscible at testing temperatures, the temperature at which the maximum value of adhesive tensile strength was recorded tended to move toward higher temperature as tackifier content of blends increased. This result corresponds to the glass transition temperature (T_g) of the blends that became higher as tackifier content of blends increased when blend components were miscible. In terms of HMA performances, we suggest that factors other than miscibility affect absolute values of adhesive tensile strength more directly than miscibility; this idea has to be investigated further in a future study. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 719–725, 2002     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene and application to preparation of porous membranes

Poly(vinyl acetate)–TEMPO (PVAc–TEMPO) macroinitiators were synthesized by bulk polymerization of vinyl acetate in the presence of benzoyl peroxide (BPO) followed by termination with 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO). Radicals were mainly transferred to the acetoxy methyl groups in PVAc during the polymerization. The PVAc–TEMPO macroinitiators had several TEMPO‐dormant sites and styrene bulk polymerization with the macroinitiators produced poly(vinyl acetate)‐graft‐polystyrene (PVAc‐g‐PS). All the TEMPO‐dormant sites of PVAc–TEMPO macroinitiators participated in the styrene polymerization with almost equal reactivity. Methanolysis of PVAc‐g‐PS broke the PS branches apart from the PVAc backbone chains. Hydrophobic or hydrophilic porous membranes with controlled pore size could be prepared by removing the PVAc domains or the PS domains from the graft copolymer. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1658–1667, 2001     

Properties of chlorinated polyethylene rubber/ethylene vinyl acetate copolymer blend‐based foam

A series of chlorinated polyethylene rubber (CM)/ethylene vinyl acetate (EVA) blends were prepared at different blending ratio. The blends were foamed by compression molding and azodicarbonamide (AZDC) was used as chemical blowing agent. Cure characteristics were researched first, and then the morphology and physical properties were investigated. It was found that neat CM foams presented a series of problems such as low hardness and high shrinkage ratio. To solve the above problems, some EVA was added into CM matrix. And the results indicated that these aforementioned defects were improved after the addition of EVA component. Tensile strength increased first and then fell, and morphology properties of CM/EVA blends were also investigated. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Preparation of high molecular weight poly(vinyl alcohol) with high yield by emulsion polymerization of vinyl acetate using 2,2′‐azobis(2‐amidinopropane) dihydrochloride

To prepare high molecular weight (HMW) poly(vinyl acetate) (PVAc) with high yield and high linearity as a precursor of HMW poly(vinyl alcohol) (PVA), vinyl acetate (VAc) was emulsion polymerized using, azo initiator, 2,2′‐azobis(2‐amidinopropane) dihydrochloride (AAPH). This was compared with the polymerization using potassium peroxodisulfate (KPS) as an initiator at various polymerization conditions. PVA, having a maximum number average degree of polymerization (P_n) of 3500 was obtained by the saponification of PVAc with P_n of 13,000–14,000, degree of branching (DB) for the acetyl group of about 3.4–3.5, and a maximum conversion of VAc into PVAc of 95%, which was polymerized by AAPH. These numerical values were superior compared with 14,500–15,000 of P_n of PVAc, obtained by KPS, and 3100 of maximum P_n of resulting PVA, DB of about 3.7–3.8, and maximum conversion of 90%. From the foregoing experimental results, we found that AAPH was a more efficient initiator than KPS in increasing both conversion of PVAc and molecular weight of PVA. In addition, PVAc microspheres, obtained by these emulsion polymerizations, can be converted to PVA / PVAc shell / core microspheres through a series of surface‐saponifications, maintaining their spherical morphology. Various surface morphologies, such as flat or wrinkled and swellable or nonswellable ones formed by the various molecular parameters and saponification conditions, were examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2356–2362, 2004     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Methoxy poly(ethylene glycol)‐b‐poly(L‐lactic acid) copolymer nanoparticles as delivery vehicles for paclitaxel

Methoxy poly(ethylene glycol)‐b‐poly(L ‐lactic acid) (MPELLA) was prepared by the melt polycondensation of methoxy poly(ethylene glycol) and L ‐lactic acid. The structure and properties of MPELLA were characterized by IR, ¹H‐NMR, differential scanning calorimetry, and wide‐angle X‐ray diffraction. To estimate its feasibility as a vehicle for paclitaxel, MPELLA nanoparticles were prepared by a self‐emulsification/solvent evaporation method. The paclitaxel‐loaded nanoparticles (PMTs) showed a spherical morphology with an inner core and an outer shell. The size, size distribution, and loading capacity of PMTs were also measured. The release kinetics of paclitaxel from PMTs in vitro was studied. The results show that paclitaxel can be effectively incorporated into MPELLA nanoparticles, which provide a delivery system for paclitaxel and other hydrophobic or toxic compounds. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2116–2122, 2005     

Preparation of high‐molecular‐weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4′‐azobis(4‐cyanovaleric acid)

Vinyl acetate (VAc) was solution‐polymerized at 40°C and 50°C using 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as an initiator and methanol as a solvent, and effects of polymerization temperature and initiator concentration were investigated in terms of conversion of VAc into poly (vinyl acetate) (PVAc), degree of branching (DB) for acetyl group of PVAc, and molecular weights of PVAc and resulting poly(vinyl alcohol) (PVA) obtained by saponifying with sodium hydroxide. Slower polymerization rate by adopting ACVA and lower viscosity by methanol proved to be efficient in obtaining linear high‐molecular‐weight (HMW) PVAc with high conversion and HMW PVA. PVA having maximum number–average degree of polymerization (P_n) of 4300 could be prepared by the saponification of PVAc having maximum P_n of 7900 polymerized using ACVA concentration of 2 × 10^?5 mol/mol of VAc at 40°C. Moreover, low DB of below 1 could be obtained in ACVA system, nevertheless of general polymerization temperatures of 40°C and 50°C. This suggests an easy way for producing HMW PVA with high yield by conventional solution polymerization without using special methods such as low‐temperature cooling or irradiation. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 4831–4834, 2006     

Influence of the molecular weight of ethylene vinyl acetate copolymers on the flow and mechanical properties of uncompatibilized polystyrene/ethylene–vinyl acetate copolymer blends

Rubber‐toughened polystyrene (PS) has been extensively studied and is a well‐established material. However, the use of thermoplastic elastomers to toughen PS is new and not well understood. In this study, three types of ethylene vinyl acetate (EVA) copolymers with the same vinyl acetate (VA) content (27.2–28.8 wt %) but with different melt flow indexes (MFI; g (10 min)⁻¹) of 365–440 (Elvax 210), 38.0–48.0 (Elvax 240) and 2.6–3.4 (Elvax 265) were used as impact modifiers for PS. The uncompatibilized blend systems at different compositions were prepared using a twin‐screw extruder and injection moulding to produce the required test pieces. The viscosity of the dispersed phase (EVA) has a significant effect on the mechanical properties of the blends. Rheological studies show that uncompatibilized PS/EVA265 blends exhibit some degree of compatibility when the amount of EVA265 added is below 30 wt %. These results indicate that EVA265 with the lowest melt flow index or highest molecular weight is the most effective impact modifier for PS. The mechanism for such behaviour is still unclear. © 2001 Society of Chemical Industry     

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) as a compatibilizer for cellulose acetate/poly(ε‐caprolactone) blends

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) (PVPVAc‐g‐PCL) was synthesized by radical copolymerization of N‐vinyl‐2‐pyrrolidone (VP)/vinyl acetate (VAc) comonomer and PCL macromonomer containing a reactive 2‐hydroxyethyl methacrylate terminal. The graft copolymer was designed in order to improve the interfacial adhesiveness of an immiscible blend system composed of cellulose acetate/poly(ε‐caprolactone) (CA/PCL). Adequate selections of preparation conditions led to successful acquisition of a series of graft copolymer samples with different values of molecular weight ( ), number of grafts (n), and segmental molecular weight of PVPVAc between adjacent grafts (M_n (between grafts)). Differential scanning calorimetry measurements gave a still immiscible indication for all of the ternary blends of CA/PCL/PVPVAc‐g‐PCL (72 : 18 : 10 in weight) that were prepared by using any of the copolymer samples as a compatibilizer. However, the incorporation enabled the CA/PCL (4 : 1) blend to be easily melt‐molded to give a visually homogeneous film sheet. This compatibilizing effect was found to be drastically enhanced when PVPVAc‐g‐PCLs of higher and M_n (between grafts) and lower n were employed. Scanning electron microscopy revealed that a uniform dispersion of the respective ingredients in the ternary blends was attainable with an assurance of the mixing scale of several hundreds of nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of ethylene vinyl acetate (EVA) copolymer nanotubes by wetting of anodic alumina oxide (AAO) method

Ethylene vinyl acetate (EVA) nanotube arrays were successfully prepared through wetting of anodic alumina oxide (AAO) template with polymer melt or solution, a simple physical technique. The results of scanning electron microscope (SEM) demonstrate that the wall thickness of nanotubes via solution wetting method varies from the concentrations of solutions. The EVA nanotubes, obtained from 5.0 to 7.0 wt% EVA solutions, are ca. 40 nm and ca. 60 nm, respectively. As for melt wetting method, the length of nanotubes depends on temperature and the flow properties of polymer melt. The mechanism of forming the nanotubes has been also discussed.