A toolkit for epithermal neutron beam characterisation in BNCT

Methods for dosimetry of epithermal neutron beams used in boron neutron capture therapy (BNCT) have been developed and utilised within the Finnish BNCT project as well as within a European project for a code of practise for the dosimetry of BNCT. One outcome has been a travelling toolkit for BNCT dosimetry. It consists of activation detectors and ionisation chambers. The free-beam neutron spectrum is measured with a set of activation foils of different isotopes irradiated both in a Cd-capsule and without it. Neutron flux (thermal and epithermal) distribution in phantoms is measured using activation of Mn and Au foils, and Cu wire. Ionisation chamber (IC) measurements are performed both in-free-beam and in-phantom for determination of the neutron and gamma dose components. This toolkit has also been used at other BNCT facilities in Europe, the USA, Argentina and Japan.     

Characterisation of an accelerator-based neutron source for BNCT versus beam energy

Neutron capture in ¹⁰B produces energetic alpha particles that have a high linear energy transfer in tissue. This results in higher cell killing and a higher relative biological effectiveness compared to photons. Using suitably designed boron compounds which preferentially localize in cancerous cells instead of healthy tissues, boron neutron capture therapy (BNCT) has the potential of providing a higher tumor cure rate within minimal toxicity to normal tissues. This clinical approach requires a thermal neutron source, generally a nuclear reactor, with a fluence rate sufficient to deliver tumorcidal doses within a reasonable treatment time (minutes). Thermal neutrons do not penetrate deeply in tissue, therefore BNCT is limited to lesions which are either superficial or otherwise accessible. In this work, we investigate the feasibility of an accelerator-based thermal neutron source for the BNCT of skin melanomas. The source was designed via MCNP Monte Carlo simulations of the thermalization of a fast neutron beam, generated by 7 MeV deuterons impinging on a thick target of beryllium. The neutron field was characterized at several deuteron energies (3.0–6.5 MeV) in an experimental structure installed at the Van De Graaff accelerator of the Laboratori Nazionali di Legnaro, in Italy. Thermal and epithermal neutron fluences were measured with activation techniques and fast neutron spectra were determined with superheated drop detectors (SDD). These neutron spectrometry and dosimetry studies indicated that the fast neutron dose is unacceptably high in the current design. Modifications to the current design to overcome this problem are presented.     

Production of epithermal neutron beams for BNCT

The use of boron neutron capture therapy (BNCT) for the treatment of deep-seated tumors requires neutron beams of suitable energy and intensity. Simulations indicate the optimal energy to reside in the epithermal region, in particular between 1 and 10 keV. Therapeutic neutron beams with high spectral purity in this energy range could be produced with accelerator-based neutron sources through a suitable neutron-producing reaction. Herein, we report on different solutions that have been investigated as possible sources of epithermal neutron beams for BNCT. The potential use of such sources for a hospital-based therapeutic facility is discussed.     

Spectrum shaping of accelerator-based neutron beams for BNCT

We describe Monte Carlo simulations of three facilities for the production of epithermal neutrons for Boron Neutron Capture Therapy (BNCT) and examine general aspects and problems of designing the spectrum-shaping assemblies to be used with these neutron sources. The first facility is based on an accelerator-driven low-power subcritical reactor, operating as a neutron amplifier. The other two facilities have no amplifier and rely entirely on their primary sources, a D-T fusion reaction device and a conventional 2.5 MeV proton accelerator with a Li target, respectively.     

BNCT neutron beam characterization using a resonance absorption filter method

The use of a resonance filter technique based on either a BF₃ or a miniature lithium–glass scintillator is described. The principles affecting the choice of suitable resonance absorber materials are discussed, and some preliminary results are shown.     

An accelerator-based neutron microbeam system for studies of radiation effects

A novel neutron microbeam is being developed at the Radiological Research Accelerator Facility (RARAF) of Columbia University. The RARAF microbeam facility has been used for studies of radiation bystander effects in mammalian cells for many years. Now a prototype neutron microbeam is being developed that can be used for bystander effect studies. The neutron microbeam design here is based on the existing charged particle microbeam technology at the RARAF. The principle of the neutron microbeam is to use the proton beam with a micrometre-sized diameter impinging on a very thin lithium fluoride target system. From the kinematics of the ?Li(p,n)?Be reaction near the threshold of 1.881 MeV, the neutron beam is confined within a narrow, forward solid angle. Calculations show that the neutron spot using a target with a 17-μm thick gold backing foil will be <20 μm in diameter for cells attached to a 3.8-μm thick propylene-bottomed cell dish in contact with the target backing. The neutron flux will roughly be 2000 per second based on the current beam setup at the RARAF singleton accelerator. The dose rate will be about 200 mGy min?1. The principle of this neutron microbeam system has been preliminarily tested at the RARAF using a collimated proton beam. The imaging of the neutron beam was performed using novel fluorescent nuclear track detector technology based on Mg-doped luminescent aluminum oxide single crystals and confocal laser scanning fluorescent microscopy.     

Monte Carlo modelling of a voxel head phantom for in vivo measurement of bone-seeker nuclides

Whole-body counters (WBCs) are used for the assessment of the internal contamination of actinides in the human body. WBCs require adequate calibration procedures that rely on the use of suitable calibration phantoms. A previous study carried out at the ENEA-Radiation Protection Institute was aimed at designing a head calibration phantom in which a heterogeneous distribution of 241Am point sources could satisfactorily approximate an assumed homogeneous contamination throughout the head bones. Suitable correction factors for the WBC detection efficiencies were evaluated with Monte Carlo. The present paper summarises the main aspects and implications of an advanced modelling technique based on a VOXEL approach. The methodology could be extended to other bone-seeker radionuclides.     

Development and application of anthropomorphic voxel phantom of the head for in vivo measurement

The in vivo measurement of the activity deposited in the skeleton is a very useful source of information on human internal contaminations with transuranic elements, e.g. americium 241, especially for long time periods after intake. Measurements are performed on the skull or the larger joints such as the knee or elbow. The paper deals with the construction of an anthropomorphic numerical phantom based on CT scans, its potential for calibration and the estimation of the uncertainties of the detection system. The density of bones, activity distribution and position of the detectors were changed in individual simulations in order to estimate their effects on the result of the measurement. The results from simulations with the numerical phantom were compared with the results of physical phantoms.     

医院中子照射器I型堆超热中子束流孔道的优化设计

采用蒙特卡罗程序(Monte Carlo neutron and photo transport code,MCNP)对医院中子照射器Ⅰ型堆(IHNI-1)超热中子束流孔道的慢化层、反射层进行了优化设计。首先对FLUENTAL、Al等材料组成的6种慢化体方案进行了分析比较,给出了孔道出口处超热中子通量密度较大的两种设计方案;基于此两种慢化体设计方案,在保持束流孔道外框尺寸不变情况下,对慢化体周围的反射层进行了分析比较,给出了反射层的推荐方案;基于慢化体和反射层优化方案,最后给出了超热中子束流孔道出口处束流参数的空间分布。     

Microdosimetric evaluation of the neutron field for BNCT at Kyoto University reactor by using the PHITS code

In this study, microdosimetric energy distributions of secondary charged particles from the (10)B(n,α)(7)Li reaction in boron-neutron capture therapy (BNCT) field were calculated using the Particle and Heavy Ion Transport code System (PHITS). The PHITS simulation was performed to reproduce the geometrical set-up of an experiment that measured the microdosimetric energy distributions at the Kyoto University Reactor where two types of tissue-equivalent proportional counters were used, one with A-150 wall alone and another with a 50-ppm-boron-loaded A-150 wall. It was found that the PHITS code is a useful tool for the simulation of the energy deposited in tissue in BNCT based on the comparisons with experimental results.     

Influence of voxel size on specific absorbed fractions and S-values in a mouse voxel phantom

Photon and electron specific absorbed fractions (SAFs) and S-values have been evaluated using mouse voxel phantoms. In voxel phantoms, it is important to choose the voxel size carefully since it affects the accuracy of results. In this study, two mouse voxel phantoms were constructed, with cubic voxels, one with 0.1-mm sides and the other with 0.4-mm sides. The sources were considered to be distributed uniformly in the main organs and the radiation transport was simulated using the Monte Carlo code EGS4. It was found that the effect of voxel size on SAFs for self-irradiation was not high (<10 %) for electrons and photons. However, it was appreciable for cross-irradiation especially for electrons. The effect of voxel size was investigated on S-values for some beta emitters such as (131)I, (153)Sm, (188)Re and (90)Y.     

Dosimetric measurements with a brain equivalent plastic walled ionization chamber in an epithermal neutron beam

The tissue substitute A-181 plastic, which has an elemental composition matching both the constituent hydrogen and nitrogen of brain tissue, was assessed for dosimetry in boron neutron capture therapy (BNCT). The sensitivity of an A-181 walled ionization chamber relative to photons for all neutrons in a clinical epithermal beam was calculated to vary between 0.79 +/- 0.04 in-air and 0.95 +/- 0.01 at depths of 4 cm and greater in-phantom. Differences in the total neutron doses measured with A-150 and A-181 plastic-walled chambers were attributed, within experimental error, to the dose produced by thermal neutron capture reactions from the different concentrations of nitrogen in the two tissue substitutes. The response of the A-181 chamber was converted to total neutron dose with an uncertainty increasing with depth in-phantom from 13 to 23% the magnitude of which is determined by the subtraction of a relatively large photon dose. The use of A-181 in place of A-150 plastic will no longer require partitioning the measured neutron dose by energy and should simplify dose reporting in BNCT.     

Polarization of a neutron beam using a superconductor

Based on the London theory of superconductivity and using the quasistatic approximation, we have calculated the interaction energy between a superconducting plane and a dipole which is moving toward or away from the plane. Using the decoupling approximation, we have investigated the displacement and the angle flipping of a neutron, when the neutron moves toward or away from the superconducting plane. The theoretical model can, in principle, be applied to construct an apparatus to polarize the beam from a thermal neutron reactor.     

Preliminary design of a Gd-NCT neutron beam based on compact D-T neutron source

Gadolinium has been recently proposed, as neutron capture agent in NCT (Neutron Capture Therapy), due to both the nuclide high neutron capture cross section, and the remarkable selective uptake inside tumour tissue that Gd-loaded compounds, can provide. When a neutron external source is supplied, different Gd nuclear reactions, and the generated Auger electrons in particular, cause a high local energy deposition, which results in a tumour cell inactivation. Preliminary micro- as well as macrodosimetric Monte Carlo computational investigations show that the tumour-to-healthy tissue biological damage ratio is in close relation to the neutron beam energy spectrum. The results points out that the optimum neutron spectrum, to be used for Gd-NCT, seems to lie in the 1 to 10 keV energy range. In order to 'tailor' such spectra, an original, accelerator-driven, neutron source and spectrum shaping assembly for hospital-based Gd-NCT are presented and preliminary results are reported.     

GEANT4 used for neutron beam design of a neutron imaging facility at TRIGA reactor in Morocco

Neutron imaging has a broad scope of applications and has played a pivotal role in visualizing and quantifying hydrogenous masses in metallic matrices. The field continues to expand into new applications with the installation of new neutron imaging facilities.In this scope, a neutron imaging facility for computed tomography and real-time neutron radiography is currently being developed around 2.0MW TRIGA MARK-II reactor at Maamora Nuclear Research Center in Morocco (Reuscher et al., 1990 [1]; de Menezes et al., 2003 [2]; Deinert et al., 2005 [3]).The neutron imaging facility consists of neutron collimator, real-time neutron imaging system and imaging process systems. In order to reduce the gamma-ray content in the neutron beam, the tangential channel was selected. For power of 250 kW, the corresponding thermal neutron flux measured at the inlet of the tangential channel is around 3×10¹¹ ncm²/s.This facility will be based on a conical neutron collimator with two circular diaphragms with diameters of 4 and 2 cm corresponding to L/D-ratio of 165 and 325, respectively. These diaphragms' sizes allow reaching a compromise between good flux and efficient L/D-ratio. Convergent-divergent collimator geometry has been adopted.The beam line consists of a gamma filter, fast neutrons filter, neutron moderator, neutron and gamma shutters, biological shielding around the collimator and several stages of neutron collimator. Monte Carlo calculations by a fully 3D numerical code GEANT4 were used to design the neutron beam line (http://www.info.cern.ch/asd/geant4/geant4.html[4]).To enhance the neutron thermal beam in terms of quality, several materials, mainly bismuth (Bi) and sapphire (Al₂O₃) were examined as gamma and neutron filters respectively. The GEANT4 simulations showed that the gamma and epithermal and fast neutron could be filtered using the bismuth (Bi) and sapphire (Al₂O₃) filters, respectively.To get a good cadmium ratio, GEANT 4 simulations were used to define the design of the moderator in the inlet of the radiation channel. A graphite block of 22 cm thickness seems to be the optimal neutron moderator.The results showed that the combination of 5 cm of bismuth with 5 cm of sapphire permits the filtration of gamma-rays, epithermal neutrons as well as fast neutrons in a considerable way without affecting the neutron thermal flux.     

Development of a tiny neutron probe with an optical fibre for BNCT

We have developed a tiny neutron probe detector as a monitor of a thermal neutron flux for boron neutron capture therapy. The detector consists of an optical fibre and a small neutron probe. We have used a film-like ZnS(Ag) scintillator and a 6LiF neutron converter for the neutron probe. In order to improve the gamma-neutron discrimination ability, vacuum evaporation of 6LiF onto the ZnS(Ag) film has been done. In order to improve the neutron detection efficiency, we made use of a wavelength-shifting fibre as the probe material. The characteristics of the above two types of fibre probe detector have been evaluated experimentally.     

Study of the neutron beam line shield design for JSNS

The JSNS, a spallation neutron source of J-PARC (JAERI-KEK Joint Project of the High Intensity Proton Accelerator) has 23 neutron beam lines. In the present study, a database was formulated for an optimum shielding design using the MCNP-X code. The calculations involved two steps. In the first step, the neutron distributions were created in the typical neutron beam line with a model that included the spallation neutron source target. The neutron currents evaluated flowed from the duct into the duct wall which was the boundary source for the bulk shield surrounding the beam line. In the second step, bulk-shield calculations were performed for the various shielding materials (iron, concrete, heavy concrete and so on) used and their composites up to thicknesses of 3 m. The results were compared with each other. Composite material shields of iron and such hydrogeneous materials as polyethylene or concrete were more effective. A typical design was prepared for a beam line within 25 m distance from a moderator, as a sample.     

Use of the CT images for BNCT calculation: development of BNCT treatment planning system and its applications to dose calculation for voxel phantoms

A BNCT (Boron Neutron Capture Therapy) treatment planning system (BTPS) was developed for BNCT study and treatment planning. Three kinds of CT images, VHP, PINNACLE and DICOM images, were employed to make voxel phantoms for BNCT patient treatment using the BTPS. The thermal neutron, fast neutron, gamma and boron doses are calculated and background, tissue, and tumour doses for idealised standard reactor neutron field (ISRNF) neutron beam were calculated by using BTPS and MCNP code. It was noted that the total computing times needed for BNCT analysis could be greatly reduced since the BTPS system provides a dose analysis tool and a lengthy MCNP input in a short time. It is, thus, expected that the BTPS can significantly contribute the BNCT study for the treatment of patients.     

A study of neutron radiation quality with a tissue-equivalent proportional counter for a low-energy accelerator-based in vivo neutron activation facility

The accelerator-based in vivo neutron activation facility at McMaster University has been used successfully for the measurement of several minor and trace elements in human hand bones due to their importance to health. Most of these in vivo measurements have been conducted at a proton beam energy (E(p)) of 2.00 MeV to optimise the activation of the selected element of interest with an effective dose of the same order as that received in chest X rays. However, measurement of other elements at the same facility requires beam energies other than 2.00 MeV. The range of energy of neutrons produced at these proton beam energies comes under the region where tissue-equivalent proportional counters (TEPCs) are known to experience difficulty in assessing the quality factor and dose equivalent. In this study, the response of TEPCs was investigated to determine the quality factor of neutron fields generated via the (7)Li(p, n)(7)Be reaction as a function of E(p) in the range 1.884-2.56 MeV at the position of hand irradiation in the facility. An interesting trend has been observed in the quality factor based on ICRP 60, Q(ICRP60), such that the maximum value was observed at E(p)=1.884 MeV (E(n)=33±16 keV) and then continued to decline with increasing E(p) until achieving a minimum value at E(p)=2.0 MeV despite a continuous increase in the mean neutron energy with E(p). This observation is contrary to what has been observed with direct fast neutrons where the quality factor was found to increase continuously with an increase in E(p) (i.e. increasing E(n)). The series of measurements conducted with thermal and fast neutron fields demonstrate that the (14)N(n, p)(14)C produced 580 keV protons in the detector play an important role in the response of the counter under 2.0 MeV proton energy (E(n) ≤ 250 keV). In contrast to the lower response of TEPCs to low-energy neutrons, the quality factor is overestimated in the range 1-2 depending on beam energy <2.0 MeV. This study provides an insight to understanding the response of TEPCs in low-energy neutron fields where the neutrons are moderated using a polyethylene moderator.     

Measurement of the neutron fields produced by a 62 MeV proton beam on a PMMA phantom using extended range Bonner sphere spectrometers

The experimental characterization of the neutron fields produced as parasitic effect in medical accelerators is assuming an increased importance for either the patient protection or the facility design aspects. Medical accelerators are diverse in terms of particle type (electrons or hadrons) and energy, but the radiation fields around them have in common (provided that a given threshold energy is reached) the presence of neutrons with energy span over several orders of magnitude. Due to the large variability of neutron energy, field or dosimetry measurements in these workplaces are very complex, and in general, cannot be performed with ready-to-use commercial instruments.In spite of its poor energy resolution, the Bonner Sphere Spectrometer (BSS) is the only instrument able to simultaneously determine all spectral components in such workplaces. The energy range of this instrument is limited to E<20 MeV if only polyethylene spheres are used, but can be extended to hundreds of MeV by including metal-loaded spheres (extended range BSS, indicated with ERBSS).With the aim of providing useful data to the scientific community involved in neutron measurements at hadron therapy facilities, an ERBSS experiment was carried out at the Centro di AdroTerapia e Applicazioni Nucleari Avanzate (CATANA) of INFN—LNS (Laboratori Nazionali del Sud), where a proton beam routinely used for ophthalmic cancer treatments is available. The 62 MeV beam was directed towards a PMMA phantom, simulating the patient, and two neutron measurement points were established at 0° and 90° with respect to the beam-line. Here the ERBSS of UAB (Universidad Autónoma de Barcelona—Grup de Física de les Radiacions) and INFN (Istituto Nazionale di Fisica Nucleare—Laboratori Nazionali di Frascati) were exposed to characterize the “forward” and “sideward” proton-induced neutron fields. The use of two ERBSS characterized by different set of spheres, central detectors, and independently established and calibrated, is important for guaranteeing the robustness of the measured spectra and estimating their overall uncertainties.