Synthesis of diiron sulfur clusters containing thiolato-1,8-naphthalene imide ligand

Three diiron sulfur clusters containing thiolato-1,8-naphthalene imide ligand, [Cp*Fe(μ-4,5-S₂-ⁿBu-NMI)(μ-CO)FeCp*] (3a), [Cp′Fe(μ-4,5-S₂-ⁿBu-NMI)(μ-CO)FeCp′] (3b), [CpFe(ⁿBu-NMI-S)]₂ (4) (3a: Cp* = η⁵-C₅Me₅; 3b: Cp′ = η⁵-C₅HMe₄; 4: Cp = η⁵-C₅H₅; ⁿBu-NMI = N-butyl-1,8-naphthalene imide) were synthesized via the reaction of N-butyl-4,5-disulfide-1,8-naphthalene imide and [Cp2Fe(μ-CO)CO]₂ (Cp2 = Cp*, Cp′, Cp). A partially desulfurated product [CpFe(ⁿBu-NMI-S)]₂ was determined in the reaction of [CpFe(μ-CO)CO]₂ with ⁿBu-NMI 4,5-dithiolate. The new complexes were structurally characterized by X-ray analysis.     

Alkoxo- and carboxylato-bridged hexanuclear copper(II) complex: Synthesis,structure and magnetic properties

Reaction of copper(II) nitrate trihydrate with N,N-dimethylethanolamine (dmea) and pivalic acid in methanol led to the hexanuclear copper(II) complex Cu₆(η¹:μ₂-C₄H₁₀NO)₄(η¹:η¹:μ₂-C₅H₉O₂)₄(η¹:μ₁-C₅H₉O₂)₂(μ₃-OH)₂ (1). The crystal structure of 1 indicates that hexametallic centers are bridged by the μ₃-alkoxo, dmea oxygens, and the μ₂-dicarboxylato oxygen atoms of pivalate ions. Furthermore, in the asymmetric unit, three types of copper ions have been found labeled as Cu₁, Cu₂ and Cu₃. The Cu₂ takes a distorted octahedral shape, whereas Cu₁ and Cu₃ adopt square pyramidal geometries. The complex 1 shows strong antiferromagnetic interactions through the oxo groups within the dimeric units (J = − 82.6 to − 25.8 cm^− 1) and weak antiferromagnetic couplings between the dimers (J = − 10.9 and 0.8 cm^− 1).     

Ethylene polymerization using an asymmetric dinuclear titanocene catalyst carrying a novel 3-oxa-pentamethylene bridge

The asymmetric 3-oxa-pentamethylene bridged dinuclear titanocenium complex (CpTiCl₂)₂ (η⁵-C₉H₆(CH₂CH₂ OCH₂CH₂)-η⁵-C₅H₃ CH₃) (1) has been prepared, characterized by ¹H NMR spectroscopy and elemental analysis, and after activation with MAO tested as a homogenous catalyst for the polymerization of ethylene. The results show that the catalytic activity of 1 as well as the molecular weight of the produced polyethylene are higher than those using the alkylidene bridged asymmetric dinuclear metallocenes (CpTiCl₂)₂ (η⁵-C₉H₆(CH₂) _n-η⁵-C₅H₄), n = 3 (4), 4 (5). The molecular weight distribution of polyethylene produced with 1/MAO reaches 11.00 and the HT-GPC curve shows a bimodal distribution. The melting point of the polyethylene obtained by 1/MAO is higher than 135 °C and the ¹³C NMR spectrum of PE shows only one strong signal at 30 ppm for the methylene units indicating a highly linear and crystalline polymer.     

Semi-rigid N-para-ferrocenyl(benzoyl)amino-acid esters for biomaterials: synthesis and characterization of Fc-C6H4CONHCH(R)CO2Me where Fc = (η5-C5H5)Fe(η5-C5H4) and R=H,CH3,CH2CH(CH3)2,CH2C6H5 and the X-ray crystal structures of Fc-C6H4CO2Me and the l-alanine derivative Fc-C6H4CONHCH(CH3)CO2Me

A series of N-para-(ferrocenyl)benzoyl amino-acid esters, para-Fc(C₆H₄)CONHCH(R)CO₂CH₃ {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄); R = H, CH₃, CH₂CH(CH₃)₂, CH₂C₆H₅}, 3–6 have been prepared by coupling para-(ferrocenyl)benzoic acid to the amino-acid esters (gly, l-Ala, l-Leu, l-Phe) using the standard 1,3-dicyclohexylcarbodiimide (DCC), 1-hydroxybenzotriazole (HOBt) protocol. The compounds were fully characterized by a range of spectroscopic techniques including FAB-MS. The X-ray crystal structures of the parent para-(ferrocenyl)benzoyl methyl ester, Fc-C₆H₄CO₂Me, 1 and a chiral derivative N-{para-(ferrocenyl)benzoyl}-l-alanine methyl ester, Fc-C₆H₄CONHCH(CH₃)CO₂Me, 4 have been determined.     

Reactivity of cyrhetrenylphosphines: Synthesis and characterization of oxides,boranes and selenides

Reaction of cyrhetrenylphosphines, of general formula (η⁵-C₅H₄PR₂)Re(CO)₂L (R = Ph, L = CO (1); R = Cy; L = CO (2); R = Ph, L = PMe₃ (3) and R = Ph, L = P(OMe)₃ (4)), with H₂O₂, BH₃·THF or selenium gives the respective cyrhetrenylphosphine oxides, boranes and selenides. These species were characterized by standard spectroscopic techniques (FT-IR, ¹H and ³¹PNMR). Based on the ³¹P⁷⁷Se coupling constant (¹J_P-Se) of the phosphine-selenides, we established the following order of basicity of the parent cyrhetrenylphosphine 2 > 3 > 4 > 1. We also confirmed the opposite electronic effects of the cyrhetrenyl and ferrocenyl groups attached to a –PR₂ unit. Finally, phosphine selenides 2c and 4c were structurally characterized by X-ray diffraction.     

Structural differences of half-sandwich complexes of scandium and yttrium containing bulky substituents

Scandium and yttrium half-sandwich chloride complexes (η⁵-C₅Me₄R)ScCl₂(THF)₂ R = CH₂Ph (3) or SiMe₂CH₂CH₂Ph (5) and (η⁵-C₅Me₄R)YCl₂(THF)₂ R = CH₂Ph (4) or SiMe₂CH₂CH₂Ph (6) were prepared by metathetic reactions of the corresponding substituted lithium or potassium cyclopentadienides with scandium or yttrium trichloride. A mutual comparison of the determined solid state structures of 4 and 5 revealed the tetranuclear character in the case of scandium complex containing C₅Me₄SiMe₂CH₂CH₂Ph ligand, while a formation of the trinuclear ate-complex 4 incorporating lithium was observed for the combination of yttrium and the benzyl substituted tetramethyl cyclopentadienyl. Moreover, the steric effect of addition of another differently substituted cyclopentadienyl ring into the molecule was evaluated.     

Reactions of benzophenone imine complex [Tp(NH═CPh2)(PPh3)Ru–Cl] with alkyne and dimerization of terminal alkynes in the presence of Et3N

Treatment of benzophenone imine complex [Tp(PPh₃)(NH═CPh₂)Ru–Cl] (1) {Tp═HB(pz)₃, pz = pyrazolyl} with 4-Ethynyltoluene in the presence of H₂O in distilled ethanol afforded the chelate alkenyl ketone complex [Tp(PPh₃)RuCCH₂(p-MeC₆H₄)═CHC(O)(p-MeC₆H₄)] (2). On the other hand, reaction of 1 with HC≡C(O)OR₁ in R₂OH produced the chelate vinyl ether complexes [Tp(PPh₃)Ru–C(OR₂)═CHC(O)OR₁] (3a, R₁ = Me, R₂ = Me; 3b, R₁ = Et, R₂ = Me; 3c, R₁ = Et, R₂ = Et; 3d, R₁ = Me, R₂ = Et), respectively. Preliminary results on the catalytic activity of 1 are also presented. Intriguingly, complex 1 is found to catalyze the dimerization of terminal alkynes HC≡CR (R = p-MeC₆H₄, C(O)OCH₃) in the presence of Et₃N to give eynes. The structures of 3c and 3d have been determined by X-ray diffraction analysis.     

Synthesis and crystal structure of the singly tucked-in derivative of bis(phenyltetramethylcyclopentadienyl)titanium

Thermolysis of [TiMe₂(η⁵-C₅Me₄Ph)₂] (4) at 145 °C for 5 h afforded the singly tucked-in paramagnetic titanocene [Ti(III)(η⁵-C₅Me₄Ph){η⁵:η¹-C₅Me₃Ph(CH₂)}] (9). In distinction to the singly tucked-in permethyltitanocene [Ti(III)(η⁵-C₅Me₅){η⁵:η¹-C₅Me₄(CH₂)}] (1) which was found crystallographically disordered [J.M. Fischer, W.E. Piers, V.G. Young, Jr., Organometallics 15 (1996) 2410] the single crystal X-ray diffraction analysis of 9 afforded molecular parameters with nearly by one order better precision as measured by esd-values.     

Activity of Mo(II) allylic complexes supported in MCM-41 as oxidation catalysts precursors

[Mo(η³-C₃H₅)X(CO)₂(NCCH₃)₂] (X = Br, 1a; X = Cl, 1b) complexes reacted with the bidentate ligand RNC(Ph)–C(Ph)NR, R = (CH₂)₂CH₃ (DAB, 2) affording [Mo(η³-C₃H₅)X(CO)₂(DAB)] (X = Br, 4a; X = Cl, 4b), which were characterized by elemental analysis, FTIR and ¹H and ¹³C NMR spectroscopy. The modified silylated ligand RNC(Ph)C(Ph)NR, R = (CH₂)₃Si(OCH₂CH₃)₃ (DAB–Si, 3), was used to immobilize the two complexes in MCM-41 (MCM) mesoporous silica. The new materials were characterized by powder X-ray diffraction, N₂ adsorption analysis, FTIR and ²⁹Si and ¹³C CPMAS solid state NMR spectroscopy. Both the materials and the complexes were tested in the oxidation of cyclooctene and styrene and behaved as active catalyst precursors for cyclooctene and styrene epoxidation with TBHP (t-butylhydroperoxide), leading selectively to epoxides with high conversions and TOFs. Although the homogeneous systems reach 100% conversion of cyclooctene and slightly less for styrene, the loss of catalytic activity in the heterogeneous systems is small, with a 98% conversion of styrene achieved by the chloride containing material.     

Organometallic boxes built from 5,10,15,20-tetra(4-pyridyl)porphyrin panels and hydroxyquinonato-bridged diruthenium clips

Self-assembly of 5,10,15,20-tetra(4-pyridyl)porphyrin (tpp-H₂) tetradentate panels with dinuclear arene ruthenium clips [Ru₂(η⁶-arene)₂(dhbq)Cl₂] (arene = C₆H₅Me, p-PrⁱC₆H₄Me, C₆Me₆; dhbq = 2,5-dihydroxy-1,4-benzoquinonato) affords the cationic organometallic boxes [Ru₈(η⁶-C₆H₅Me)₈(tpp-H₂)₂(dhbq)₄]⁸⁺ ([1]⁸⁺), [Ru₈(η⁶-p-PrⁱC₆H₄Me)₈(tpp-H₂)₂(dhbq)₄]⁸⁺ ([2]⁸⁺) and [Ru₈(η⁶-C₆Me₆)₈(tpp-H₂)₂(dhbq)₄]⁸⁺ ([3]⁸⁺). These octanuclear cations have been isolated as their triflate salts and characterised by mass spectrometry, NMR and IR spectroscopy. The molecular structure of these systems was deduced by one-dimensional and two-dimensional NMR experiments (ROESY, COSY, HSQC).     

Two new luminescent Cd(II)/Zn(II) metal–organic frameworks for exceptionally selective detection of picric acid explosives

Two new coordination polymers, {[Cd(BIDPT)(oba)]·0.5H₂O}_n (1) and {[Zn(BIDPT)(4,4′-sdb)]·2.25H₂O}_n (2) (BIDPT = 4,4′-bis(imidazol-l-yl)diphenyl thioether, H₂oba = 4,4′-oxydibenzoic acid, 4,4′-H₂sdb = 4,4′-sulfonyldibenzoic acid), have been solvothermally synthesized and characterized. Both 1 and 2 show 2-fold interpenetrating 3D frameworks with {6⁵ ∙ 8} cds and {6⁶} dia topology, respectively. These two coordination polymers show strong luminescence and their luminescence could be quenched by a series of nitro explosives. Importantly, they exhibit very highly sensitive and selective detection of picric acid compared to other nitro explosives.     

First example of a near-IR photodetector based on neutral [M(R-dmet)2] bis(1,2-dithiolene) metal complexes

We report on the first example of a light signal photodetecting device based on the new class of neutral bis(1,2-dithiolene) complexes [M(R-dmet)₂], whose ligand is intermediate between those belonging to the classes dmit²⁻ and R,R′-timdt²⁻ (dmit²⁻ = 2-thioxo-1,3-dithiole-4,5-dithiolato; R,R′-timdt²⁻ = N,N′-disubstituted 2-thioxoimidazoline-4,5-dithiolato; R-dmet²⁻ = N-substituted 2-thioxothiazoline-4,5-dithiolato). The device, hosting the active material [Ni(Et-dmet)₂] (1) casted on a quartz substrate, acts as a photodetector responsive in a wide spectral range, reaching the appealing near-IR region, and features the highest efficiency values as compared to those based on the dithiolene complexes [Ni(Me,Non-timdt)₂] (2) and [Pt(Et,Pent-timdt)₂] (3).     

Three d10 coordination polymers based on rigid ligands with flexible functional groups: Syntheses,structures and luminescence

Three coordination polymers, namely, {[Zn(L)(BPY)]·DMF·H₂O}_n (1), {[Zn(L)(TPY)]·0.5H₂BDC·H₂O}_n (2), {[Cd(L)(H₂O)₂]·DMF}_n (3), have been synthesized based on a rigid linear carboxylate ligand (H₂L = 2′,5′-dimethoxy-[1,1′:4′,1″-terphenyl]-4,4″-dicarboxylic acid) and different lengths of pyridine ligands (TPY = 4,3′:5′,4″-terpyridine; BPY = 4,4′-bipyridine). These complexes have been characterized by single crystal X-ray diffraction, infrared spectroscopy, thermogravimetry, elemental analysis, and powder X-ray diffraction measurements. Complex 1 is a 6-connected 3-fold interpenetrating pcu net with point symbol {4¹² ∙ 6³}, 2 and 3 can be simplified as 4-connected sql nets with point symbol {4⁴ ∙ 6²}. In addition, their photoluminescent properties are also investigated in detail.     

Blue-green photoluminescent 5- and 10-connected metal 5-(4′-carboxy-phenyl)tetrazolate coordination polymers

Hydrothermal reaction of Zn/Cd salts, NaN₃ and 4-cyanobenzoic acid via in situ [2 + 3] cycloaddition generated two blue-green photoluminescent coordination polymers [Zn(cptta)(H₂O)] (1) and [Cd(cptta)(H₂O)] (2) (H₂cptta = 5-(4′-carboxy-phenyl)tetrazole). When only metal ions are considered as nodes, 1 shows rare 5-connected Shubnikov plane topological type and 2 has unprecedented 10-connected {3¹².4²⁴.5⁹} topological type.     

Synthesis and characterization of nickel phosphonopropionate hybrid materials

Hydrothermal reaction of nickel acetate with 3-phosphonopropionic acid and 4,4′-bipyridine resulted in two novel phosphonate compounds Ni(HO₃PC₂H₄COO)(4,4′-bpy)(H₂O) · 0.5(4,4′-bpy) (bpy = bipyridine) (I) and Ni(O₃PC₂H₄COOH)(4,4′-bpy)(H₂O)₃ · H₂O (II). Single-crystal X-ray studies reveal that self-assemblies between the ligands and metal ion result in layer (I) and chain (II) structures. Magnetic measurement of I indicate there are ferromagnetic couplings between adjacent Ni²⁺ ions (C = 1.29 cm³ mol⁻¹ K and θ = 2.25 K).     

Copolymerization of N-propargylphosphonamidates. Helicity control of the copolymers by P-chirality

The copolymerization of diastereomeric pairs of N-propargylphosphonamidate monomers 1–3 ((1R,2S,5R)-HCCCH₂NHP(O)R-O-menthyl, 1: R = CH₃, 2: R = C₂H₅, 3: R = n-C₃H₇) carrying P- and C-chiral centers was carried out with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] as a catalyst in CHCl₃ for 24 h to afford the copolymers with number-average molecular weights ranging from 1400 to 12 000 in 65–85% yields. The cis contents of the copolymers were above 80%. The copolymers consisting of a pair of diastereomeric monomer units with a large diastereomeric excess showed a large specific rotation and an intense Cotton effect in CHCl₃, indicating that they take a helical conformation with predominantly one-handed screw sense. On the other hand, the copolymer with a small diastereomeric excess showed a small specific rotation and a CD signal. The copolymerization of P-(R)-1 (1a) with an achiral N-propargylphosphoramidate monomer, HCCCH₂NHP(O)(OPh)₂ (4) was also carried out with various feed ratios. Among the obtained copolymers with various compositions, poly(1a₉₅-co-4₅) showed the largest specific rotation and CD intensity in CHCl₃, and poly(1a₅₀-co-4₅₀) did so in THF. The copolymers decreased the CD intensity upon raising the temperature.     

Palladium-catalyzed formation of secondary and tertiary amines from aryl dihalides with air-stable ferrocenyl tri- and diphosphines: Synthesis and X-ray structure of efficient catalysts beyond [PdCl2(DPPF)]

Robust, air-stable tridentate and bidentate ferrocenylphosphines 1,2-bis(diphenylphosphino)-1′-(diisopropylphosphino)-4-tert-butylferrocene, L5, and 1,1′-bis(diisopropylphosphino)-3,3′-bis(tert-butyl)ferrocene, L9, combined with 1 mol% of [PdCl(η³-C₃H₅)]₂ led to two new catalytic systems which allow the coupling of aniline derivatives with mono- and dihaloarenes to form functionalized diarylamines and triarylamines. The excellent selectivity of the reactions avoids the deleterious dehalogenation of the substrates and products. The X-ray structure characterization of the related complex [PdCl₂(L9)] is reported in which ligand L9 in its meso form is significantly distorted.     

Thermal dehydration of Y(TFA)3(H2O)3: Synthesis and molecular structures of [Y(μ,η1:η1-TFA)3(THF)(H2O)]1∞ · THF and [Y4(μ3-OH)4(μ,η1:η1-TFA)6(η1-TFA)(η2-TFA)(THF)3(DMSO)(H2O)] · 6THF (TFA = trifluoroacetate)

In order to obtain a better anhydrous precursor for various applications in materials science and catalysis, thermal dehydration reactions of Y(TFA)₃(H₂O)₃ (TFA = trifluoroacetate) (A) were investigated. Thermal treatment of A at different temperatures under vacuum (5 × 10^?2 mm) for several hours failed to give totally anhydrous yttrium trifluoroacetate (as indicated by IR). Two different complexes, a partially dehydrated [Y(μ,η¹:η¹-TFA)₃(THF)(H₂O)]_1∞·THF (1) and a partially hydrolyzed [Y₄(μ₃-OH)₄(μ,η¹:η¹-TFA)₆(η¹-TFA)(η²-TFA)(THF)₃(DMSO)(H₂O)] · 6THF (2), were obtained with good and moderate yield, respectively, by crystallization of two different thermally treated batches of A from THF (or THF + DMSO) at room temperature. More efficient dehydration of A could be achieved at 200 °C in a furnace, the obtained anhydrous yttrium tris-trifluoroacetate giving Y(TFA)₃(THF)₂ (3) on crystallization from THF. All the products were characterized by elemental analyses, FT-IR and ¹H NMR spectroscopy as well as thermo-gravimetric analysis. In addition, single crystal X-ray structures are reported for 1 and 2, which show either a terminal (η¹ and η²) or bridging (μ,η¹:η¹) bonding behavior of the TFA ligand.     

Three novel bismuth-based coordination polymers: Synthesis,structure and luminescent properties

Three novel bismuth-based coordination polymers, [(CH₃)₂NH₂][Bi(pdc)(bdc)]·2DMF, [(CH₃)₂NH₂][Bi(tdc)₂]·1.5DMF and [Bi(bpdc)₂H₂O]·xGuest (compounds 1–3) (H₂pdc = 3,5-pyridinedicarboxylic acid, H₂bdc = 1,4-benzenedicarboxylic acid, H₂tdc = 2,5-thiophenedicarboxylic acid, H₂bpdc = 4,4′-biphenyldicarboxylic acid), have been successfully synthesized under solvothermal conditions and characterized by single crystal X-ray diffraction. Compounds 1 and 2, which are constructed by 9-coordinated or 8-coordinated Bi^3 +, feature three-dimensional structures with hms and dia topology, respectively. However, 5-coordinated Bi^3 + based compound 3 is a two-dimensional layered structure. Compound 1 can tune emissive performance by doping different lanthanide ions Tb^3 +, Eu^3 + and Dy^3 +. Furthermore, detection of nitro explosives is investigated. All of the compounds are characterized by elemental analysis, IR spectrum and thermogravimetric analysis.     

Ligand concentration and reaction time controlled successive substitution of chloro and η6-benzene of di-μ-chlorobis{η6-benzene)dichlororuthenium(II)} with selenated Schiff base: Formation of half sandwich Ru(II) complex highly active catalyst for oxidation of alcohols

Schiff base (L) synthesized by reacting 2-methylthiobenzeldehyde with 2-(phenylseleno)ethylamine on reaction with di-μ-chlorobis{η⁶-benzene)dichloro-ruthenium(II)}(a) forms two type of species: (i) [Ru(L)₂][PF₆]₂ (1) [L:a = 4:1 and reaction time ～8 h] and (ii) [Ru(η⁶-C₆H₆)(L)][PF₆]₂ (2) [L:a = 2:1 and reaction time ～1 h]. This is first example in which chloro as well benzene ring both are successively substituted by controlling metal:ligand ratio and duration of reaction. The geometry around Ru in complex 1 is distorted octahedral. The 2 has a pseudo-octahedral half sandwich “piano-stool” disposition of ligands around Ru. The Ru–Se distances are 2.4683(10)–2.5082(7) ?. The proton and carbon-13 NMR spectra of L and its both complexes 1 and 2 authenticate them. The 2 shows high catalytic activity for oxidation of primary and secondary alcohols both (TON upto 9.6 × 10⁴; TOF upto 4.80 × 10⁴ h^?1).