Functionalization of amphiphilic coil-rod-coil triblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine) with florescence moiety and C60

We recently achieved quantitative synthesis of an amphiphilic coil-rod-coil triblock copolymer, poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate)-b-poly(2-vinylpyridine), by coupling in situ living diblock copolymer poly(2-vinylpyridine)-b-poly(n-hexyl isocyanate) (P2VP-b-PHIC) using malonyl chloride in the presence of pyridine. This led to the introduction of an active methylene group that is a site for further functionalization in the rod block. The Michael addition reaction of the triblock copolymer with 7-(4-trifluoromethyl) coumarin acrylamide led to copolymer bearing a fluorescent pendent in the rod block. The fluorescent labeled copolymers were isolated in ∼94% yields. Similarly C₆₀ pendent was introduced to the rod block by the Bingel reaction. The yields of C₆₀ functionalized copolymers were ∼54%. The precursor and functionalized amphiphilic coil-rod-coil copolymer show diverse morphologies, such as micelles and vesicles by simply changing the solvent. For the C₆₀ functionalized block copolymer, structural constraints in micelles and vesicles prevented C₆₀ pendents to aggregate.     

Transition behavior and ionic conductivity of lithium perchlorate-doped polystyrene-b-poly(2-vinylpyridine)

We report the transition behavior and the ionic conductivity of ion-doped amorphous block copolymer, based on two compositionally different polystyrene-block-poly(2-vinylpyridine) copolymers (PS-b-P2VPs) that can self-assemble into nanostructures, where P2VP block is ionophilic to lithium perchlorate (LiClO₄). The transition temperatures of LiClO₄-doped PS-b-P2VP, like the order-to-disorder transition (T_ODT), were measured by small-angle X-ray scattering (SAXS) and depolarized light scattering (DPLS). The selective ionic coordination to the nitrogen units of P2VP block leads to the increase of the repulsive interactions between two block components from weak- to strong-segregation regime with increasing amount of LiClO₄, which results subsequently in the increased T_ODT. However, for a compositionally asymmetric PS-b-P2VP under lamellar morphology, the ionic conductivity by the addition of LiClO₄ was remarkably increased at higher temperatures, representing that the effective ionic coordination at the greater volume fraction of P2VP block component improves the ionic conductivity as the temperature approaches to a rubbery phase.     

Anionic Ring-Opening Polymerization (ROP) of a Phosphorus-Bridged [1]Ferrocenophane Initiated by Living Polystyrene and Polyisoprene: Synthesis of Novel Organic–Poly(ferrocenylphosphine) Block Copolymers

The novel block copolymers, polystyrene-b-poly(ferrocenylphosphine) and polyisoprene-b-poly(ferrocenylphosphine), were synthesized by anionic polymerization, utilizing the living organic anions to initiate the ring-opening polymerization of a phosphorus-bridged [1]ferrocenophane. The resulting block copolymers possess narrow polydispersities and have potentially coordinating phosphorus sites in the polymer backbone. These materials are of interest as precursors to metallized self-assembled nanoscale architectures.     

The effect of polystyrene-block-poly(4-vinylpyridine) prepared by a RAFT method in the dispersion polymerization of MMA

The dispersion polymerization of methyl methacrylate (MMA) has been carried out using polystyrene-block-poly(4-vinylpyridine) copolymer [P(S-b-4VP)], which was prepared by a reversible addition-fragmentation chain transfer (RAFT) method, as a steric stabilizer in an alcohol media. The stable polymer particles were obtained when the block copolymer concentrations increased from 1 to 10 wt% relative to the monomer and the average particle sizes decreased from 5.3 to 3.4 μm with the increasing concentration of the block copolymer. In particular, the incorporation of 2 wt% polystyrene-block-poly(4-vinylpyridine) produced 4.3 μm of monodisperse PMMA particles with 2.14% of C_v. Thus, the P(S-b-4VP) block copolymer prepared by the RAFT method is working not only as a steric stabilizer, but also in providing monodisperse micron-sized PMMA particles.     

Fabrication of fibril like aggregates by self-assembly of block copolymer mixtures via interpolymer hydrogen bonding

This paper describes the formation of fibril like aggregates from the self-assembly of block copolymer mixture (polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) and polystyrene-b-poly(acrylic acid) (PS-b-PAA)) via interpolymer hydrogen bonding in nonselective solvent. The hydrogen bonding between P4VP and PAA in chloroform leads to the formation of complex. When all the pyridine units in P4VP were all hydrogen bonded to acrylic acid in PAA, the formed complex is insoluble, resulting in the formation of spherical micellar aggregates and nanorods. However, two kinds of supramolecules with insoluble or soluble complex are formed in the solution when PS-b-P4VP and PS-b-PAA are mixed with equal mole ratio. The fibril like aggregates can be formed from the self-assembly of supramolecule with soluble complex during spin-coating process. The effects of evaporation rate of solvent and solution concentrations on the formation of fibril like aggregates were investigated. The results prove that the kinetic factors play an important role in the formation of the fibril like aggregates.     

Synthesis, characterization, and bulk crosslinking of polybutadiene-block-poly(2-vinyl pyridine)-block-poly(tert-butyl methacrylate) block terpolymers

We report on the synthesis and characterization of triblock terpolymers, polybutadiene-block-poly(2-vinyl pyridine)-block-poly(tert-butyl methacrylate) (PB-b-P2VP-b-PtBMA; BVT), via sequential living anionic polymerization in THF at low temperatures using sec-butyl lithium as initiator. In this work, 18 different BVT terpolymers were produced with volume fractions Φ_B : Φ_V : Φ_T in the range of 1 : 0.4…1.2 : 0.2…4.6. All polymers exhibit a very narrow molecular weight distribution (PDI < 1.1). They were characterized in terms of bulk morphology using small-angle X-ray scattering and transmission electron microscopy, unveiling mostly lamellar patterns or hexagonally arranged cylindrical structures. Some polymers displayed a partial gyroid structure coexisting with lamellar parts or cylinders with a non-continuous shell around the PB core and could serve as an interesting template for the facile generation of multi-compartmental self-assembled structures. In one case the middle block, P2VP, is forming a helix around the PB core. Crosslinking of the polybutadiene compartment of the bulk morphologies with an UV-photoinitiator was performed, followed by sonication-assisted dissolution of the aggregates to elucidate further use of the terpolymers for the generation of soft polymeric nanoparticles with controlled functionality. In that way, core-crosslinked cylindrical micelles could be generated and characterized.     

Temperature-dependent interaction parameters of poly(methyl methacrylate)/poly(2-vinyl pyridine) and poly(methyl methacrylate)/poly(4-vinyl pyridine) pairs

Temperature-dependent interaction parameters (α) of poly(methyl methacrylate)/poly(2-vinyl pyridine) (PMMA/P2VP) pair and PMMA/poly(4-vinyl pyridine) (PMMA/P4VP) pair were obtained from the SAXS profiles at various temperatures, and curve fitting to the random phase approximation theory. For this purpose, symmetric P2VP-block-PMMA and P4VP-block-PMMA copolymers were synthesized anionically. The molecular weights of both block copolymers were controlled to exhibit the disordered state over the entire experimental temperatures. We found that the value of α for PMMA/P4VP was larger than PMMA/P2VP, similar to polystyrene (PS)/poly(vinyl pyridine) pairs. However, the difference between in α between PMMA/P2VP and PMMA/P4VP was much smaller than that between PS/P2VP and PS/P4VP. This might be attributed to the hydrophilic PMMA block compared with hydrophobic PS block. Finally, the order-to-disorder transition temperature for symmetric P2VP-block-PMMA copolymers was determined by small angle X-ray scattering and birefringence methods.     

Living Anionic Ring-Opening Polymerization of Unsymmetrically Substituted Silicon-Bridged [1]Ferrocenophanes; A Route to Organometallic Block Copolymers with Amorphous Poly(ferrocenylsilane) Blocks

Living anionic ring-opening polymerization methodology for silicon-bridged [1]ferrocenophanes has been extended to unsymmetrically substituted monomers. This permits access to well-defined amorphous poly(ferrocene) homopolymers and organometallic block copolymers, such as polystyrene-b-poly(ferrocenylmethylphenylsilane), with an amorphous poly(ferrocenylsilane) block. This allows phase separation to occur at lower temperatures, which should facilitate applications in which organometallic nanodomains are desirable.     

Study of the time evolution of the surface morphology of thin asymmetric diblock copolymer films under solvent vapor

The time development of the surface morphology of asymmetric polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) thin films ‘annealing’ in methanol vapor, a selective solvent for minority P4VP block, was investigated by atomic force microscopy(AFM). For PS-b-P4VP with cylindrical structure in bulk, as annealing time progressed, the surface morphology underwent structural transitions from featureless topography to hybrid morphology of cylindrical and spherical pits, to cylinders, to nanoscale depressions, back to cylinders again. The different film thickness made the number of the transitions observed, at any given annealing time, different. The thicker the film is the more transitions at a given annealing time can be observed. If the film was not thick enough, depressions appeared. For PS-b-P4VP with spherical structure in bulk, it displayed nanoscale depressions with the annealing time increasing. A possible mechanism of the transition of morphologies during solvent annealing was proposed.     

Nanostructured polystyrene-block-poly(4-vinyl pyridine)(pentadecylphenol) thin films as templates for polypyrrole synthesis

Polypyrrole has been chemically synthesized on thin film nanostructures obtained from comb-shaped supramolecules of polystyrene-block-poly(4-vinyl pyridine) (PS-b-P4VP) hydrogen bonded with pentadecylphenol (PDP). PDP was washed from thin films of cylindrical and lamellar self-assembled comb-copolymer systems, which resulted in removal of the upper layers of microdomains, leaving single cylindrical and lamellar layers covering a substrate, with P4VP segregated at the bottom as well as at the free air interface. This P4VP was complexed with Cu²⁺ ions, after which chemical oxidation polymerization of pyrrole resulted in a thin polypyrrole layer covering the nanostructured block copolymer. The use of a catalytic amount of bipyrrole greatly improved the quality of the obtained product. The conductivity was measured to be ∼0.7 S cm⁻¹.     

Ion-dipole interactions in the dispersion of organoclay nanocomposites based on polystyrene-block-poly(2-vinylpyridine) copolymer

The dispersion characteristics of organoclay nanocomposites based on polystyrene-block-poly(2-vinylpyridine) (S2VP diblock) copolymer were investigated using transmission electron microscopy (TEM), X-ray diffraction (XRD), and solid-state nuclear magnetic resonance (NMR) spectroscopy. For the investigation, S2VP diblock copolymers having three different compositions were synthesized via sequential anionic polymerization. Each S2VP diblock copolymer was used to prepare nanocomposites by solution blending with natural clay (montmorillonite, MMT) or commercial organoclays (Cloisite 30B, Cloisite 10A, Cloisite 15A, and Cloisite 25A from Southern Clay Products). All four organoclays employed were treated with a surfactant having quaternary ammonium salt with N⁺ ion. It was found, via TEM and XRD, that the nanocomposites with MMT show very poor dispersion characteristics regardless of block copolymer composition. However, the block copolymer composition was found to have a profound influence on the dispersion characteristics of the nanocomposites with an organoclay. Specifically, the nanocomposites based on S2VP-5 having 5 wt% poly(2-vinylpyridine) (P2VP) block gave rise to a very high degree of dispersion, irrespective of the chemical structure of the surfactant residing at the surface of the organoclay employed, whereas the dispersion characteristics of the nanocomposites became progressively poorer as the amount of P2VP block in an S2VP diblock copolymer increased from 5 to 25 wt% and to 56 wt%. The observed dispersion characteristics were explained by hypothesizing the presence of ion-dipole interactions between the positively charged N⁺ ions in the surfactant residing at the surface of the organoclay nanoparticles and the dipoles in the P2VP block of S2VP diblock copolymers. The validity of this hypothesis was confirmed using solid-state NMR spectroscopy, by determining the dependence of the composition of S2VP diblock copolymer on the extent of ion-dipole interactions and thus on the dispersion characteristics of the nanocomposites prepared.     

Organic/inorganic nanoobjects with controlled shapes from gelable triblock copolymers

A functional gelable triblock copolymer, poly(2-vinylpyridine)-block-poly(3-(triethoxysilyl)propyl methacrylate)-block-polystyrene (P2VP-b-PTEPM-b-PS), was prepared by the combination of reversible addition-fragmentation chain transfer (RAFT) mediated radical polymerization and copper catalyzed click chemistry. Bulk microphase separation of P2VP₃₁₀-b-PTEPM₅₈-b-PS₃₂₂ under different conditions was studied in order to prepare organic/inorganic nanoobjects by a procedure of crosslinking PTEPM phases and dispersing in a solvent. The conditions included using different annealing solvents and adding stearic acids to form supramolecular complexes with P2VP blocks respectively. Then the packed cylinders with P2VP cores and PTEPM shells dispersed in the PS matrix, lamella with alternating PS, PTEPM and P2VP layers, and the inverse cylindrical morphology with PS cores and PTEPM shells dispersed in the matrix of P2VP/stearic acid complex were obtained respectively just from the same triblock copolymer sample. After crosslinking PTEPM microdomains by sol-gel process and dispersing in solvents, a series of organic/inorganic polymeric nanoobjects, including two types of nanofibers with inverse internal structure and one novel kind of nanoplates, were produced. Further modification of the fibers with P2VP cores has been studied.     

Preparation and characterization of graft copolymers of methyl methacrylate and poly(n-hexyl isocyanate) macromonomers

Living poly(n-hexyl isocyanate) (PHIC) was deactivated with methacryloyl chloride to produce methacryl-terminated poly(n-hexyl isocyanate) (PHIC-MA) rodlike macromonomers. Radical copolymerization of methyl methacrylate (MMA) with PHIC-MA was performed using 2,2′-azobis(isobutyronitrile) as an initiator in benzene at 60 °C to prepare poly(methyl methacrylate)-graft-poly(n-hexyl isocyanate) (PMMA-graft-PHIC) graft copolymers. The monomer reactivity ratios of MMA (M₁) and PHIC-MA (M₂) were evaluated as r₁=11.5 and r₂=∼0, exhibiting remarkably lower reactivity of PHIC-MA macromonomer than that of common macromonomers. The resultant graft copolymers were characterized using gel permeation chromatography equipped with low-angle laser light-scattering to determine the molecular weights, and equipped with a refractive index detector and an ultraviolet light detector to estimate a PHIC weight fraction of PMMA-graft-PHIC at the ith elution volume of the GPC chromatogram. There are 2-3 PHIC grafts per PMMA molecule, and the PHIC rodlike chains might be difficult to introduce into the PMMA main chains having higher molecular weights. A specific dimension of PMMA-graft-PHIC in solution was discussed in detail.     

Phase transformation and self-assembly behavior of supramolecular rod–comb block copolymers

We investigated the self-assembly behavior of a series of supramolecular rod–comb block copolymer complexes made by the hybridization of rod–coil diblock copolymers of poly (2,5-di(2-ethylhexyloxy)-1,4-phenylene vinylene)-b-poly(2-vinyl pyridine) (PPV-b-P2VP_f) with different volume fractions, f, of the P2VP coils and an anionic surfactant, dodecyl benzenesulfonic acid (DBSA), that selectively interacts with the P2VP to form the side-chain comb teeth. The resulting hybrids show hierarchically ordered structures at multiple length scales, forming so-called structure-in-structure morphology. Notably, for PPV-b-P2VP_0.56(DBSA)_x, the larger-scale structure changes from a lamellar phase, to a broken lamella, and eventually to a hexagonally packed strip phase with increasing DBSA molar ratio (x) to P2VP monomer unit. Furthermore, simultaneous SAXS and WAXS measurements showed that the order-disorder transition temperatures of larger-scale structures in the PPV-P2VP_0.56(DBSA) rod–comb systems were higher than those associated with the pristine PPV-P2VP_0.56 polymers. The large-scale structure of PPV-P2VP_0.56(DBSA) exists at temperatures around 210 °C even though the rod–rod interaction between PPV blocks disappear at ∼120 °C, signifying that the formation of the P2VP(DBSA) lamellar mesophase plays a critical role in forming the large-scale hexagonally packed strip structures.     

Miscibility with positive deviation in Tg-composition relationship in blends of poly(2-vinyl pyridine)-block-poly(ethylene oxide) and poly(p-vinyl phenol)

Phase behavior and miscibility with positive deviation from linear T_g-composition relationship in a copolymer/homopolymer blend system, poly(2-vinyl pyridine)-block-poly(ethylene oxide) (P2VP-b-PEO)/poly(p-vinyl phenol) (PVPh), were investigated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR) and solid-state ¹³C nuclear magnetic resonance (¹³C NMR), optical microscopy (OM), and scanning electron microscopy (SEM). Optical and electron microscopy results as well as NMR proton spin-lattice relaxation times in laboratory frame () all confirmed the miscibility as judged by the T_g criterion using DSC. In comparison to the literature result on a homopolymer/homopolymer blend of P2VP/PVPh, fitting with the Kwei equation on the T_g-composition relationship for the block-copolymer/homopolymer blend of P2VP-b-PEO/PVPh blend system yielded a smaller q value (q = 120) for P2VP-b-PEO/PVPh than that for P2VP/PVPh blend (q = 160). The FT-IR and ¹³C NMR results revealed hydrogen-bonding interactions between the pendant pyridine group of P2VP-b-PEO and phenol unit in PVPh, which is responsible for the noted positive deviation of the T_g-composition relationship. Comparison of the shifts of hydroxyl IR absorbance band, reflecting the average strength of H-bonding, indicates a decreasing order of P2VP/PVPh > P2VP-b-PEO/PVPh > PEO/PVPh blends. The PEO block in the copolymer segment tends to defray the interaction strength in the P2VP-b-PEO/PVPh blends because of relative weaker interaction between PEO and PVPh than that between P2VP and PVPh pairs. A comparative ternary (P2VP/PEO)/PVPh blend was also studied as the controlling experiments for comparison to the P2VP-b-PEO/PVPh blend. The thermal behavior and interaction strength in (P2VP/PEO)/PVPh ternary blends are discussed with those in the P2VP-b-PEO/PVPh copolymer/homopolymer blend.     

Preparation of amphiphilic PS-b-PMAA diblock copolymer by means of atom transfer radical polymerization

Amphiphilic diblock copolymers of polystyrene-b-poly(methacrylic acid) were synthesized by means of atom transfer radical polymerization. First, the polystyrene with a bromine atom at the chain end (PS-Br) was prepared using styrene as the monomer, 1-bromoethyl benzene as the initiator, and CuCl/2,2′-bipyridyl (bpy) as the catalyst ([1-bromoethyl benzene]/[CuCl]/[bpy] = 1:1:3). The polymerization was well controlled. Second, the diblock copolymer of polystyrene-b-poly(tert-butyl methacrylate) was synthesized also by atom transfer radical polymerization using PS-Br as the macro-initiator, CuCl/bpy as the catalyst, and tert-butyl methacrylate (tBMA) as the monomer. Finally, the amphiphilic diblock copolymer, PS-b-PMAA, was obtained by hydrolysis of PS-b-PtBMA under the acid condition. The molecular weight and the structure of aforementioned copolymers were characterized with gel permeation chromatography, infrared, and nuclear magnetic resonance. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2381–2386, 2001     

Phase behavior of linear polystyrene-block-poly(2-vinylpyridine)-block-poly(tert-butyl methacrylate) triblock terpolymers

Using sequential living anionic polymerization we synthesized well-defined linear ABC triblock terpolymers from polystyrene (PS), poly(2-vinylpyridine) (P2VP), and poly(tert-butyl methacrylate) (PtBMA). The length of the PtBMA block was systematically increased at constant block length ratios of the PS and P2VP blocks. The microdomain structures were characterized by transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). With increasing PtBMA block size we observe a systematic change in the bulk structure of the block copolymers.     

Architecture of rod–brush block copolymers synthesized by a combination of coordination polymerization and atom transfer radical polymerization

A combination of coordination polymerization and atom transfer radical polymerization (ATRP) was applied to a novel synthesis of rod–brush block copolymers. The procedure included the following steps: (1) the monoesterification reaction of ethylene glycol with 2-bromoisobutyryl bromide (BIBB) yielded the bifunctional initiator monobromobutyryloxy ethylene glycol and (2) a trichlorocyclopentadienyl titanium (CpTiCl₃; bifunctional initiator) catalyst was prepared from a mixture of CpTiCl₃ and bifunctional initiator. The coordination polymerization of n-butyl isocyanate initiated by such a catalyst provided a well-defined macroinitiator, poly(n-butyl isocyanate)–bromine (PBIC–Br). (3) The ATRP method of 2-hydroxyethyl methacrylate initiated by PBIC–Br provided rod [poly(n-butyl isocyanate) (PBIC)]–coil [poly(2-hydroxyethyl methacrylate) (PHEMA)] block copolymers with a CuCl/CuCl₂/2,2′-bipyridyl catalyst. (4) The esterfication of PBIC-block-PHEMA with BIBB yielded a block-type macroinitiator, and (5) ATRP of methyl methacrylate with a block-type macroinitiator provided rod–brush block copolymers. We found from the solution properties that such rod–brush block copolymers formed nanostructured macromolecules in solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dynamic study of polystyrene-block-poly(4-vinylpyridine) copolymer in bulk and confined in cylindrical nanopores

AAO template is highly recommended to nanostructure polymers and to study polymer properties under confinement. The dynamic properties of polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) under confinement using broadband dielectric spectroscopy are investigated in this work and the results compared to those of the bulk. Anodized aluminum oxide (AAO) membranes, having pore diameters from tens to hundreds of nanometers in size, were used to confine PS-b-P4VP. Moreover, the influence of gold nanoparticles (AuNPs) in the copolymer matrix was also studied. The morphology and structure of the bulk copolymer and the copolymer confined in the AAO templates were characterized by transmission electron microscopy, scanning electron microscopy and Small Angle X-Ray Scattering. For PS-b-P4VP in bulk, dielectric relaxation techniques allowed studying selectively the P4VP segmental dynamics within the diblock. At high temperature this copolymer presents a dominant peak (MWS relaxation), most likely originated by the relatively high conductivity combined with the presence of interfaces emerging in the nanostructured samples. Moreover, a pronounced β-relaxation is observed for the copolymer compared with that of pure P4VP. This is likely due to a non-negligible contribution from the α-relaxation of the PS component. The γ-relaxation is markedly different in the copolymer, which is evidenced by a distinct temperature dependence of the resulting relaxation times. When the copolymer is embedded in alumina nanopores with small pore diameters (25 and 35 nm) there are significant changes, where the tendency is going to a faster dynamics when the pore diameter decreases more likely related to the relevance of surface effects. The presence of the AuNPs in the system enhances this effect. These results are in agreement with segregated structures found in the block copolymer by TEM and SAXS.     

Water-induced morphology evolution of block copolymer micellar thin films

Morphology evolution of diblock copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) micellar thin film in the presence of water was investigated. Surface holes with nanoscale cavities in hexagonal order could be induced by water treatment for certain periods. The nanoscale surface cavities could be transformed into isolated nanospheres in a dry environment or back to protruding densely packed spheres by toluene (a selective solvent for PS coronae) treatment. The morphology evolution of micellar thin film strongly depended on the slow evaporation of toluene solvent, the swelling of P4VP cores in the humid environment, and the subsequent movement of PS chains induced by air and toluene. The incompatibility between solvent and block, and that between the unlike blocks also played an important role in the morphology evolution.