倒装焊器件封装结构设计

倒装焊是今后高集成度半导体的主要发展方向之一。倒装焊器件封装结构主要由外壳、芯片、引脚(焊球、焊柱、针)、盖板(气密性封装)或散热片(非气密性封装)等组成。文章分别介绍外壳材料、倒装焊区、频率、气密性、功率等方面对倒装焊封装结构的影响。低温共烧陶瓷(LTCC)适合于高频、大面积的倒装焊芯片。大功率倒装焊散热结构主要跟功率、导热界面材料、散热材料及气密性等有关系。倒装焊器件气密性封装主要有平行缝焊或低温合金熔封工艺。     

倒装焊结构的大规模集成电路焊点失效机理研究

在倒装焊结构的球栅阵列（BGA）封装大规模集成电路（LSIC）的服役过程中,由于BGA焊球、基板材料和PCB材料的热膨胀系数不同,焊点失效成为倒装焊结构LSIC的主要失效模式。焊点失效与焊料性质、焊接时间和温度、制造中的缺陷等密切相关。结合焊点失效的常见形貌及实例,研究倒装焊结构的LSIC的焊点失效模式及失效机理。针对可能引发失效的因素,提出从工艺到应用的一系列预防措施,对提升该类型电路的可靠性具有指导意义。     

倒装焊器件的密封技术

倒装焊的底部填充属非气密性封装,并且受倒装焊凸点焊料熔点、底部填充有机材料耐温限制,使得倒装焊器件的密封结构设计和工艺设计受限。文章结合气密性器件使用要求,设计了两种不改变现行倒装焊器件制造工艺、器件总体结构[3]的密封技术,经过分析论证以及工艺实验,确认其是可行的。密封的器件能够满足MIL-883G中有关气密性、内部水汽含量、耐腐蚀(盐雾)、耐湿以及机械试验等[6~7],密封结构、密封工艺均是在现有封装工艺条件基础上进行,具有非常强的可行性。     

基于埋置式基板的3D-MCM封装结构的研制

研制一种用于无线传感网的多芯片组件(3D-MCM).采用层压、开槽等工艺获得埋置式高密度多层有机(FR-4)基板,通过板上芯片(COB)、板上倒装芯片(FCOB)、球栅阵列(BGA)等技术,并通过引线键合、倒装焊等多种互连方式将不同类型的半导体芯片三维封装于一种由叠层模块所形成的立体封装结构中;通过封装表层的植球工艺形成与表面组装技术(SMT)兼容的BGA器件输出端子;利用不同熔点焊球实现了工艺兼容的封装体内各级BGA的垂直互连,形成r融合多种互连方式3D-MCM封装结构.埋置式基板的应用解决了BGA与引线键合芯片同面组装情况下芯片封装面高出焊球高度的关键问题.对封装结构的散热特性进行了数值模拟和测试,结果表明组件具有高的热机械可靠性.电学测试结果表明组件实现了电功能,从而满足了无线传感网小型化、高可靠性和低成本的设计要求.     

高可靠硅基MCM芯片凸点技术研究

介绍了采用芯片凸点和倒装焊技术(FCB)的MCM-Si工艺,重点研究了凸点下金属化(UBM)结构设计对电路可靠性的影响;通过再流焊和可靠性试验,以及凸点拉脱力测试,进行了可靠性评价.采用该工艺制作的电路已达到<混合集成电路通用规范>(GJB2438A-2002)靠性等级的H级.     

基于埋置式基板的3D-MCM封装结构的研制

研制一种用于无线传感网的多芯片组件（3D-MCM) . 采用层压、开槽等工艺获得埋置式高密度多层有机（FR-4）基板,通过板上芯片（COB) 、板上倒装芯片（FCOB) 、球栅阵列（BGA）等技术,并通过引线键合、倒装焊等多种互连方式将不同类型的半导体芯片三维封装于一种由叠层模块所形成的立体封装结构中;通过封装表层的植球工艺形成与表面组装技术（SMT）兼容的BGA器件输出端子;利用不同熔点焊球实现了工艺兼容的封装体内各级BGA的垂直互连,形成了融合多种互连方式3D-MCM封装结构. 埋置式基板的应用解决了BGA与引线键合芯片同面组装情况下芯片封装面高出焊球高度的关键问题. 对封装结构的散热特性进行了数值模拟和测试,结果表明组件具有高的热机械可靠性. 电学测试结果表明组件实现了电功能,从而满足了无线传感网小型化、高可靠性和低成本的设计要求.     

钉头法倒装焊技术在声表面波器件生产中的应用

简单介绍了集成电路采用的封装形式,对钉头法倒装焊技术在声表面波器件中的应用和发展趋势进行了简单分析。详细介绍了倒装焊技术在声表面波器件生产中的应用方法,对比了线焊技术和倒装焊技术的差异,介绍了倒装焊技术的优点。简单介绍了倒装焊技术的整体流程,对生产过程中的每道关键工序做了详细的描述,并对产品后期的失效形式做了简要分析。     

现代微光电子封装中的倒装焊技术

结合我们设计制作的倒装焊光电子器件-智能像素面阵,对倒装焊的工艺过程作了简要的介绍.该面阵采用铟做凸点材料,制作了输入输出数达64×64的凸点电极阵列,并采用回流焊的方式,将光电调制器面阵与对应的处理电路芯片对准后加热回流实现焊接,形成输入输出引线间距只有80μm的面阵器件.     

基于倒装焊芯片的功率型LED热特性分析

对LED的导散热理论进行了研究,推导出了倒装焊LED芯片结温与封装材料热传导系数之间的关系。通过分析倒装焊LED的焊球材料、衬底粘结材料和芯片内部热沉材料对芯片结温的影响,表明衬底粘结材料对LED的结温影响最大,并且封装材料热传导系数的变化率与封装结构的传热厚度成反比,与传热面积成正比。该研究为倒装焊LED封装结构和材料的设计提供了理论支持。     

焊球植球凸块工艺的可靠性研究

焊球植球是一种最具潜力的低成本倒装芯片凸块制作工艺.采用焊球植球工艺制作的晶圆级芯片尺寸封装芯片的凸块与芯片表面连接的可靠性问题是此类封装技术研究的重点.为此,参考JEDEC关于电子封装相关标准,建立了检验由焊球植球工艺生产的晶圆级芯片尺寸封装芯片凸块与芯片连接及凸块本身是否可靠的可靠性测试方法与判断标准.由焊球植球工艺生产的晶圆级芯片尺寸封装芯片,分别采用高温存储、热循环和多次回流进行试验,然后利用扫描电子显微镜检查芯片上凸块剖面的凸块下金属层分布和测试凸块推力大小来验证凸块的可靠性.试验数据表明焊球植球工艺生产的晶圆级芯片尺寸封装芯片具有高的封装连接可靠性.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks