Neutronics Analysis of Water-Cooled Ceramic Breeder Blanket for CFETR

In order to investigate the nuclear response to the water-cooled ceramic breeder blanket models for CFETR, a detailed 3D neutronics model with 22.5otorus sector was developed based on the integrated geometry of CFETR, including heterogeneous WCCB blanket models,shield, divertor, vacuum vessel, toroidal and poloidal magnets, and ports. Using the Monte Carlo N-Particle Transport Code MCNP5 and IAEA Fusion Evaluated Nuclear Data Library FENDL2.1,the neutronics analyses were performed. The neutron wall loading, tritium breeding ratio, the nuclear heating, neutron-induced atomic displacement damage, and gas production were determined.The results indicate that the global TBR of no less than 1.2 will be a big challenge for the watercooled ceramic breeder blanket for CFETR.     

Analysis of Time-Dependent Tritium Breeding Capability of Water Cooled Ceramic Breeder Blanket for CFETR

Attaining tritium self-sufficiency is an important mission for the Chinese Fusion Engineering Testing Reactor(CFETR) operating on a Deuterium-Tritium(D-T) fuel cycle. It is necessary to study the tritium breeding ratio(TBR) and breeding tritium inventory variation with operation time so as to provide an accurate data for dynamic modeling and analysis of the tritium fuel cycle. A water cooled ceramic breeder(WCCB) blanket is one candidate of blanket concepts for the CFETR. Based on the detailed 3D neutronics model of CFETR with the WCCB blanket,the time-dependent TBR and tritium surplus were evaluated by a coupling calculation of the Monte Carlo N-Particle Transport Code(MCNP) and the fusion activation code FISPACT-2007.The results indicated that the TBR and tritium surplus of the WCCB blanket were a function of operation time and fusion power due to the Li consumption in breeder and material activation.In addition, by comparison with the results calculated by using the 3D neutronics model and employing the transfer factor constant from 1D to 3D, it is noted that 1D analysis leads to an over-estimation for the time-dependent tritium breeding capability when fusion power is larger than 1000 MW.     

CFETR氦冷陶瓷增殖包层中子学分析

为满足中国聚变工程实验堆(CFETR)包层的应用要求,本文提出氦冷陶瓷增殖(HCCB)包层方案。为验证HCCB包层设计方案的合理性与可行性,采用三维蒙特卡罗粒子输运程序MCNP,计算和分析了HCCB包层方案的氚增殖比、中子壁负载、中子通量密度、核热、辐照损伤等中子学特性。结果表明,HCCB包层方案满足氚自持要求,中子通量密度和核热分布合理,屏蔽性能良好,基本满足设计要求。     

Updated neutronics analyses of a water cooled ceramic breeder blanket for the CFETR

The water cooled ceramic breeder (WCCB) blanket employing pressurized water as a coolant is one of the breeding blanket candidates for the China Fusion Engineering Test Reactor (CFETR).Some updating of neutronics analyses was needed,because there were changes in the neutronics performance of the blanket as several significant modifications and improvements have been adopted for the WCCB blanket,including the optimization of radial build-up and customized structure for each blanket module.A 22.5 degree toroidal symmetrical torus sector 3D neutronics model containing the updated design of the WCCB blanket modules was developed for the neutronics analyses.The tritium breeding capability,nuclear heating power,radiation damage,and decay heat were calculated by the MCNP and FISPACT code.The results show that the packing factor and 6Li enrichment of the breeder should both be no less than 0.8 to ensure tritium self-sufficiency.The nuclear heating power of the blanket under 200 MW fusion power reaches 201.23 MW.The displacement per atom per full power year (FPY) of the plasma-facing component and first wall reach 0.90 and 2.60,respectively.The peak H production rate reaches 150.79 appm/FPY and the peak He production reaches 29.09 appm/FPY in blanket module # 3.The total decay heat of the blanket modules is 2.64 MW at 1 s after shutdown and the average decay heat density can reach 11.09 kW m-3 at that time.The decay heat density of the blanket modules slowly decreases to lower than 10 W m-3 in more than ten years.     

Thermal Hydraulic Design and Analysis of a Water-Cooled Ceramic Breeder Blanket with Superheated Steam for CFETR

The water-cooled ceramic breeder blanket (WCCB) is one of the blanket candidates for China fusion engineering test reactor (CFETR). In order to improve power generation efficiency and tritium breeding ratio, WCCB with superheated steam is under development. The thermal-hydraulic design is the key to achieve the purpose of safe heat removal and efficient power generation under normal and partial loading operation conditions. In this paper, the coolant flow scheme was designed and one self-developed analytical program was developed, based on a theoretical heat transfer model and empirical correlations. Employing this program, the design and analysis of related thermal-hydraulic parameters were performed under different fusion power conditions. The results indicated that the superheated steam water-cooled blanket is feasible.     

Impact Analysis of Helium Cooled Solid Blanket Structures on the Tritium Breeding Performance in CFETR

Chinese Fusion Engineering Test Reactor (CFETR) is a test tokamak reactor to bridge the gap between ITER and future fusion power plant. As its objectives are to demonstrate generation of fusion power and to realize tritium self-sufficiency, the tritium breeding ratio (TBR) is a key design parameter. In the blanket design and optimization, the structures such as the first wall (FW), cooling plate (CP), stiffening plate (SP), cap and some other design parameters in detailed 3-D model have significant impacts on the tritium breeding performance. Based on a helium cooled solid breeder blanket option for CFETR, the impact analysis of the helium cooled solid blanket structures on tritium breeding performance was performed in this paper. Firstly, the detailed 3D neutronics model was built by using of a CAD to Monte Carlo Geometry conversion tool McCad. Then based on the detailed 3D neutronics model, the impact analyses of the blanket structures on tritium breeding performance were carried out, which include the FW, CP, SP, cap and side wall. By the sensitivity study of the blanket structures on the TBR, it gave the TBR variation trend and references for the blanket design and optimization.     

CFETR水冷陶瓷增殖剂包层模块产氚率实验验证

水冷陶瓷增殖剂（WCCB）包层作为中国聚变工程试验堆（CFETR）候选包层之一，承担着氚增殖、核热提取、屏蔽等重要涉核功能，其中子学设计的可靠性直接影响CFETR氚自持目标的实现。为验证中子学设计工具，即MCNP和FNEDL3.0数据库，在WCCB包层中子学设计中的可靠性，基于研制出的WCCB包层模块，在DT中子环境下开展中子学实验，对以产氚率（TPR）为代表的中子学参数进行了模拟值（C）和实验值（E）对比分析。结果表明，模块中轴线位置处TPR的C/E为0.97?1.08，而模块边缘位置处TPR的C/E为0.65?0.82；模块钛酸锂层边缘区197Au（n，γ）198Au反应率的C/E为0.72?0.90，表明模块边缘区存在非期望的散射中子，导致该区TPR模拟值和实验值偏离较大。     

CFETR氚自持分析评估与验证策略

中国聚变工程实验堆(China Fusion Engineering Test Reactor,简称CFETR)的主要目标之一是实现氚自持.采用氚平衡法对CFETR不同运行工况下的氚自持条件进行了分析评估.结果表明:在500 MW运行阶段,CFETR实现氚自持所需的最小氚增殖比(TBRr)为1.098,小于CFETR增...     

Neutronic analysis of Indian helium-cooled solid breeder tritium breeding module for testing in ITER

India has proposed the helium-cooled solid breeder blanket concept as a tritium breeding module to be tested in ITER. The module has lithium titanate for tritium breeding and beryllium for neutron multiplication. Beryllium also enhances tritium breeding. A design for the module is prepared for detailed analysis. Neutronic analysis is performed to assess the tritium breeding rate, neutron distribution, and heat distribution in the module. The tritium production distribution in submodules is evaluated to support the tritium transport analysis. The tritium breeding density in the radial direction of the module is also assessed for further optimization of the design. The heat deposition profile of the entire module is generated to support the heat removal circuit design. The estimated neutron spectrum in the radial direction also provides a more in-depth picture of the nuclear interactions inside the material zones. The total tritium produced in the HCSB module is around 13.87 mg per full day of operation of ITER, considering the 400 s ON time and 1400 s dwell time. The estimated nuclear heat load on the entire module is around 474 kW, which will be removed by the high-pressure helium cooling circuit. The heat deposition in the test blanket model (TBM) is huge (around 9 GJ) for an entire day of operation of ITER, which demonstrates the scale of power that can be produced through a fusion reactor blanket. As per the Brayton cycle, it is equivalent to 3.6 GJ of electrical energy. In terms of power production, this would be around 1655 MWh annually. The evaluation is carried out using the MCNP5 Monte Carlo radiation transport code and FEDNL 2.1 nuclear cross section data. The HCSB TBM neutronic performance demonstrates the tritium production capability and high heat deposition.     

Preliminary performance analysis and optimization based on 1D neutronics model for Indian DEMO HCCB blanket

India, under its breeding blanket R&D program for DEMO, is focusing on the development of two tritium breeding blanket concepts; namely the lead-lithium-cooled ceramic breeder and the helium-cooled ceramic breeder (HCCB). The study presented in this paper focuses on the neutronic design analysis and optimization from the tritium breeding perspective of the HCCB blanket. The Indian concept has an edge-on configuration and is one of the variants of the helium-cooled solid breeder blanket concepts proposed by several partner countries in ITER. The Indian HCCB blanket having lithium titanate (Li₂TiO₃) as the tritium breeder and beryllium (Be) as the neutron multiplier with reduced-activation ferritic/martensitic steel structure aims at utilizing the low-energy neutrons at the rear part of the blanket. The aim of the optimization study is to minimize the radial blanket thickness while ensuring tritium self-sufficiency and provide data for further neutronic design and thermal-hydraulic layout of the HCCB blanket. It is found that inboard and outboard blanket thicknesses of 40 cm and 60 cm, respectively, can give a tritium breeding ratio (TBR) >1.3, with 60% ⁶Li enrichment, which is assumed to be sufficient to cover potential tritium losses and associated uncertainties. The results also demonstrated that the Be packing fraction (PF) has a more profound impact on the TBR as compared to 6Li enrichment and the PF of Li₂TiO₃.     

CFETR氦冷固态增殖剂包层产氚性能研究及优化

氦冷固态增殖剂包层是中国聚变工程实验堆（CFETR）的3种候选包层概念之一。本文基于中国核工业西南物理研究院提出的一种氦冷固态增殖剂包层概念,通过蒙特卡罗输运程序MCNP5建立了包层三维中子学模型,探究了不同几何布置方案及结构设计参数对包层产氚性能的影响,得到了全堆氚增殖比（TBR）及极向各包层模块产氚分布,并由优化后的模型得到了包层模块核热分布。结果表明,优化后的TBR达到1.177,满足氚自持的最低要求。     

中国聚变工程试验堆包层的核热耦合效应研究

本文以中国聚变工程试验堆（CFETR）的氦冷固态包层和水冷固态包层为研究对象,基于蒙特卡罗程序MCNP和计算流体力学程序FLUENT,利用3D-1D-2D耦合方法和伪材料方法,分别对200 MW的氦冷固态包层和水冷固态包层及1.5 GW的水冷固态包层方案进行了核热耦合计算分析。研究结果表明,金属铍的热散射效应和轻水密度是聚变包层核热耦合效应的主要来源,核热耦合效应对氦冷固态包层的影响可忽略,对水冷固态包层的氚增殖比和温度分布有一定程度的影响。     

托卡马克聚变中子源的数值模型研究

托卡马克(Tokamak)聚变装置中子学分析中,聚变中子源描述是重要的输入参数,其准确性直接影响分析结果的可靠性。通过分析ITER和欧洲聚变示范堆(EU DEMO)中子学分析中所采用的聚变中子源模型,提出了一种完整描述Tokamak中L-mode、H-mode等离子体的D-D、D-T聚变中子源的数值模型。在中国聚变工程实验堆(CFETR)的工程集成设计平台上,编写了基于蒙特卡罗算法的程序SCG求解该数值模型,实现了读取(零维)等离子体参数、输出可供典型中子学软件MCNP直接读取的中子源定义文件的功能。以CFETR氦冷球床包层的中子学分析模型为基准,在相同的L-mode等离子体D-T聚变工况下,相较于采用EU DEMO源子程序,采用本模型计算得到的中子壁负载差异最大值为2.02%,包层氚增殖率差异为0.18%,全堆能量增益因子的差异为0.23%。结果表明,本模型与其他源描述的差异较小,可应用于CFETR的中子学分析。     

cosRMC复杂曲面开发及在聚变中子学的应用

中国聚变工程实验堆（CFETR）是我国自主设计和研制的重大科学工程,CFETR旨在与ITER相衔接和补充,为研制DEMO级别聚变堆电站提供必要的技术。蒙特卡罗方法在聚变中子学与屏蔽设计等方面具有重要作用。本文基于自主化蒙特卡罗程序cosRMC,研究了蒙特卡罗复杂曲面建模的数学模型和计算方法,开发了复杂曲面建模功能,并通过PPCS（power plant conceptual study）模型验证了该功能实现的正确性。然后构建了CFETR的三维精细化模型,并利用该模型对CFETR包层设计中的关键中子学参数进行计算分析。结果表明,cosRMC对中子学参数氚增殖比、中子壁载荷和核热沉积的计算结果与MCNP的计算值吻合良好,相对偏差均小于5%,满足工程设计需求。研究证明了cosRMC应用于聚变堆包层中子学分析的正确性和有效性。CFETR中子学参数的计算分析,也为其设计和优化提供了参考。     

Activation and Environmental Aspects of In-Vacuum Vessel Components of CFETR

The water-cooled ceramic breeder(WCCB) blanket is one of the three candidates of China's Fusion Engineering Test Reactor(CFETR). The evaluation of the radioactivity and decay heat produced by neutrons for the in-vacuum vessel components is essential for the assessment of radioactive wastes and the safety of CFETR. The activation calculation of CFETR in-vacuum vessel components was carried out by using the Monte Carlo N-Particle Transport Code MCNP, IAEA Fusion Evaluated Nuclear Data Library FENDL2.1, and the nuclear inventory code FISPACT-2007 and corresponding EAF-2007 libraries. In these analyses, the three-dimensional(3-D) neutronics model was employed and the WCCB blanket, the divertor, and the shield were modeled in detail to provide the detailed spatial distribution of the neutron flux and energy spectra. Then the neutron flux, energy spectra and the materials specification were transferred to FISPACT for the activation calculation with an assumed irradiation scenario of CFETR. This paper presents the main results of the activation analysis to evaluate the radioactivity, the decay heat, the contact dose, and the waste classification of the radioactive materials. At the time of shutdown, the activity of the WCCB blanket is 1.88×10~(19)Bq and the specific activity, the decay heat and the contact dose rate are 1.7×10~(13)Bq/kg, 3.05 MW, and 2.0×10~3Sv/h respectively. After cooling for 100 years, 79%(4166.4 tons) radioactive wastes produced from the blanket, divertor,high temperature shield(HTS) and low temperature shield(LTS) need near surface disposal, while21%(1112.3 tons) need geological disposal. According to results of the contact dose rate, all the components of the blanket, divertor, HTS and LTS could potentially be recycled after shutdown by using advanced remote handling equipment. In addition, the selection of Eurofer97 or RAFM for the divertor is better than that of SS316 because SS316 makes the activity of the divertor-body keep at a relatively high level.     

Preliminary thermal hydraulic safety analysis of water-cooled ceramic breeder blanket for CFETR

The Chinese fusion engineering test reactor (CFETR) was expected to bridge from the international thermonuclear experimental reactor (ITER) to the demonstration fusion reactor (DEMO). The water-cooled ceramic breeder (WCCB) blanket is one of the blanket candidates for CFETR. In this paper, preliminary thermal hydraulic safety analyses have been carried out using the system safety analysis code RELAP5 originally developed for light water fission reactors. The pulse operation and three typical loss of coolant accidents (LOCAs), namely, in-vessel LOCA, in-box LOCA, and ex-vessel LOCA, were simulated based on steady-state initialization. Simulation results show that important thermal hydraulic parameters, such as pressure and temperature can meet the design criterion which preliminarily verifies the feasibility of the WCCB blanket from the safety point of view.     

R&D status on Water Cooled Ceramic Breeder Blanket Technology

Japan Atomic Energy Agency (JAEA) is performing the development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) as one of the most important steps toward DEMO blanket. Regarding the blanket module fabrication technology development using F82H, the fabrication of a real scale mockup of the back wall of TBM was completed. In the design activity of the TBM, electromagnetic analysis under plasma disruption events and thermo-mechanical analysis under steady state and transient state of tokamak operation have been performed and showed bright prospect toward design justification. Regarding the development of advanced breeder and multiplier pebbles for DEMO blanket, fabrication technology development of Li rich Li₂TiO₃ pebble and BeTi pebble was performed. Regarding the research activity on the evaluation of tritium generation performance, the evaluation of tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been performed. This paper overviews the recent achievements of the development of the WCCB Blanket in JAEA.     

Nuclear Performance of Two-Phase Flow Cooling D-T Fusion Reactor Blankets

The aim of the present paper is to analyze the nuclear performance of a typical D-T fusion reactor blanket cooled by two-phase flow, and, in particular, the dependence of tritium breeding ratio (TBR), nuclear heating and neutron (energy) leakage on design variations such as the volume fraction γ occupied by coolant materials.

The value of γ plays a central role in determining the nuclear performance of the blanket considered. The TBR and nuclear heating decrease with decreasing γ while the inverse trend is found for the leakage from the blanket. To obtain the TBR greater than unity would require γ at least 30%. The feasibility of the two-phase flow cooling concept for D-T reactor blankets is contigent upon finding the way of taking advantage of the many good features associated with the flow, even at such γ.