A technique for realizing linear phase IIR filters

A real-time IIR filter structure is presented that possesses exact phase linearity with 10~1000 times fewer general multiplies than conventional FIR filters of similar performance and better magnitude characteristics than equiripple or maximally flat group delay IIR filters. This structure is based on a technique using local time reversal and single pass sectioned convolution methods to realized a real-time recursive implementation of the noncausal transfer function H(z^-1). The time reversed section technique used to realize exactly linear phase IIR filters is described. The effects of finite section length on the sectional convolution are analyzed. A simulation methodology is developed to address the special requirements of simulating a time reversed section filter. A design example is presented, with computer simulation to illustrate performance, in terms of overall magnitude response and phase linearity, as a function of finite section length. Nine example filter specifications are used to compare the performance and complexity of the time reversed section technique to those of a direct FIR implementation     

Design of low-order linear-phase IIR filters via orthogonalprojection

This paper presents an indirect linear-phase IIR filter design technique based on a reduction of linear-phase FIR filters. The desired filter is obtained by minimizing the L₂ norm of the difference between the original FIR filter and the lower order IIR filter. We first establish a relationship between the Hankel singular values of the discarded part of the FIR filter and the L₂ norm of the corresponding filter approximation error based on model truncation. This result motivates us to propose a simple finite search method that will achieve better approximation results than commonly used truncation methods such as the balanced truncation (BT) and the impulse response gramian (IRG) methods. We then develop an iterative algorithm for finding an optimal IIR filter based on a matrix projection of the original FIR filter. The convergence of the proposed algorithm is established. Filters designed using the proposed algorithm are compared with those obtained by other techniques with respect to the amplitude response and group delay characteristics in the passband. Numerical examples show that the proposed algorithm offers the best performance     

Frequency domain synthesis of IIR digital filters by means of associated FIR filters

This correspondence describes a synthesis technique for IIR digital filters which allows the use of approximation methods already developed for designing FIR filters. The technique is based on the definition, by means of a suitable transformation, of a FIR filter associated to the desired IIR filter. An example of application is given and the related results are briefly discussed.     

Two-channel IIR QMF banks with approximately linear-phase analysisand synthesis filters

Perfect linear-phase two-channel QMF banks require the use of finite impulse response (FIR) analysis and synthesis filters. Although they are less expensive and yield superior stopband characteristics, perfect linear phase cannot be achieved with stable infinite impulse response (IIR) filters. Thus, IIR designs usually incorporate a postprocessing equalizer that is optimized to reduce the phase distortion of the entire filter bank. However, the analysis and synthesis filters of such an IIR filter bank are not linear phase. In this paper, a computationally simple method to obtain IIR analysis and synthesis filters that possess negligible phase distortion is presented. The method is based on first applying the balanced reduction procedure to obtain nearly allpass IIR polyphase components and then approximating these with perfect allpass IIR polyphase components. The resulting IIR designs already have only negligible phase distortion. However, if required, further improvement may be achieved through optimization of the filter parameters. For this purpose, a suitable objective function is presented. Bounds for the magnitude and phase errors of the designs are also derived. Design examples indicate that the derived IIR filter banks are more efficient in terms of computational complexity than the FIR prototypes and perfect reconstruction FIR filter banks. Although the PR FIR filter banks when implemented with the one-multiplier lattice structure and IIR filter banks are comparable in terms of computational complexity, the former is very sensitive to coefficient quantization effects     

A direct approach to H2 optimal deconvolution ofperiodic digital channels

This paper studies the H₂ optimal deconvolution problem for periodic finite impulse response (FIR) and infinite impulse response (IIR) channels. It shows that the H₂ norm of a periodic filter can be directly quantified in terms of periodic system matrices and linear matrix inequalities (LMIs) without resorting to the commonly used lifting technique. The optimal signal reconstruction problem is then formulated as an optimization problem subject to a set of matrix inequality constraints. Under this framework, the optimization of both the FIR and IIR periodic deconvolution filters can be made convex, solved using the interior point method, and computed by using the Matlab LMI Toolbox. The robust deconvolution problem for periodic FIR and IIR channels with polytopic uncertainties are further formulated and solved, also by convex optimization and the LMIs. Compared with the lifting approach to the design of periodic filters, the proposed approach is simpler yet more powerful in dealing with multiobjective deconvolution problems and channel uncertainties, especially for IIR deconvolution filter design. The obtained solutions are applied to the design of an optimal filterbank yielding satisfactory performance     

Q value analysis of microwave photonic filters

This paper first presents the fundamental principles of the microwave photonic filters.As an example to explain how to implement a microwave photonic filter, a specific finite impulse response (FIR) filter is illustrated.Next, the Q value of the microwave photonic filters is analyzed theoretically, and methods around how to gain high Q value are discussed.Then,divided into FIR filter, first-order infinite impulse response (IIR) filter, and multi-order IIR filter, several novel microwave photonic filters with high Q value are listed and compared.The technical difficulties to get high Q value in first-order IIR filter and multi-order IIR filter are analyzed concretely.Finally, in order to gain higher Q value, a multi-order IIR microwave photonic filter that easily extends its order is presented and discussed.     

Optical half-band filters

This paper proposes two kinds of novel 2×2 circuit configuration for finite-impulse response (FIR) half-band filters. These configurations can be transformed into each other by a symmetric transformation and their power transmittance is identical. The configurations have only about half the elements of conventional FIR lattice-form filters. We derive a design algorithm for achieving desired power transmittance spectra. We also describe 2×2 circuit configurations for infinite-impulse response (IIR) half-band filters. These configurations are designed to realize arbitrary-order IIR half-band filter characteristics by extending the conventional half-band circuit configuration used in millimeter-wave devices. We discuss their filter characteristics and confirm that they have a power half-band property. We demonstrate design examples including FIR maximally flat half-band filters, an FIR Chebyshev half-band filter, and an IIR elliptic half-band filter     

Generalized digital Butterworth filter design

This correspondence introduces a new class of infinite impulse response (IIR) digital filters that unifies the classical digital Butterworth filter and the well-known maximally flat FIR filter. New closed-form expressions are provided, and a straightforward design technique is described. The new IIR digital filters have more zeros than poles (away from the origin), and their (monotonic) square magnitude frequency responses are maximally flat at ω=0 and at ω=π. Another result of the correspondence is that for a specified cutoff frequency and a specified number of zeros, there is only one valid way in which to split the zeros between z=-1 and the passband. This technique also permits continuous variation of the cutoff frequency. IIR filters having more zeros than poles are of interest because often, to obtain a good tradeoff between performance and implementation complexity, just a few poles are best     

Analysis and design of periodically time-varying IIR filters, withapplications to transmultiplexing

Fundamental constraints on the form of infinite impulse response (IIR) periodically time-varying (PTV) filters are identified, and a design technique with well-defined error and stability characteristics based on those constraints is presented. The design technique is based on the selection of poles and zeros within the time-invariant filter banks of equivalent PTV filter analysis structures. A simple example is presented to illustrate the design method, which implements the IIR PTV as a time-invariant all-feedback IIR filter of the form 1/D(z^P) cascaded with an finite impulse response (FIR) PTV filter. An application of IIR PTV filters to telecommunications transmultiplexing is presented to illustrate the design method and for comparison to an existing PTV design method. The computational complexity of the resulting system compares favorably with that of existing transmultiplexers     

Reduced order IIR approximation to FIR digital filters

An algorithm for designing an infinite-impulse-response (IIR) stable filter using a finite-impulse-response (FIR) given filter, with the objective of reducing the delay and order, is described. The design is in the time domain using the least-squares-inverse algorithm, which is briefly described. In this method, the numerator of the approximated filter is part of the FIR filter itself and no calculations and minimization are needed to find the numerator coefficients (except finding the FIR roots). An error analysis between the given FIR and approximated IIR filters is provided. This error analysis enables the designer to fix a design parameter, often unnoted, keeping the energies of the approximated and original filters equal. Results and two illustrative examples are presented     

FIR, Allpass, and IIR Variable Fractional Delay Digital Filter Design

This paper presents two-step design methodologies and performance analyses of finite-impulse response (FIR), allpass, and infinite-impulse response (IIR) variable fractional delay (VFD) digital filters. In the first step, a set of fractional delay (FD) filters are designed. In the second step, these FD filter coefficients are approximated by polynomial functions of FD. The FIR FD filter design problem is formulated in the peak-constrained weighted least-squares (PCWLS) sense and solved by the projected least-squares (PLS) algorithm. For the allpass and IIR FD filters, the design problem is nonconvex and a global solution is difficult to obtain. The allpass FD filters are directly designed as a linearly constrained quadratic programming problem and solved using the PLS algorithm. For IIR FD filters, the fixed denominator is obtained by model reduction of a time-domain average FIR filter. The remaining numerators of the IIR FD filters are designed by solving linear equations derived from the orthogonality principle. Analyses on the relative performances indicate that the IIR VFD filter with a low-order fixed denominator offers a combination of the following desirable properties including small number of denominator coefficients, lowest group delay, easily achievable stable design, avoidance of transients due to nonvariable denominator coefficients, and good overall magnitude and group delay performances especially for high passband cutoff frequency ( ges 0.9pi) . Filter examples covering three adjacent ranges of wideband cutoff frequencies [0.95, 0.925, 0.9], [0.875, 0.85, 0.825], and [0.8, 0.775, 0.75] are given to illustrate the design methodologies and the relative performances of the proposed methods.     

Low-Order IIR Filter Bank Design

The advantage of infinite-impulse response (IIR) filters over finite-impulse response (FIR) ones is that the former require a much lower order (much fewer multipliers and adders) to obtain the desired response specifications. However, in contrast with well-developed FIR filter bank design theory, there is no satisfactory methodology for IIR filter bank design. The well-known IIR filters are mostly derived by rather heuristic techniques, which work in only narrow design classes. The existing deterministic techniques usually lead to too high order IIR filters and thus cannot be practically used. In this paper, we propose a new method to solve the low-order IIR filter bank design, which is based on tractable linear-matrix inequality (LMI) optimization. Our focus is the quadrature mirror filter bank design, although other IIR filter related problems can be treated and solved in a similar way. The viability of our theoretical development is confirmed by extensive simulation.     

基于FIR与相位补偿IIR滤波器的雷达回波信号处理

FIR与IIR频率选择滤波器的设计,被广泛应用于数字信号处理领域之中。文章以雷达回波信号的数字处理为例,首先分别设计FIR,IIR滤波器完成了对信号特定频率分量的滤除。进而,针对IIR滤波器的非线性相位,基于最优化设计全通系统实现了相位补偿,并对FIR,IIR滤波器进行了综合比较。     

An FIR Channel Estimation Filter with Robustness to Channel Mismatch Condition

This letter proposes a finite impulse response (FIR) channel estimation filter that has robustness against the channel mismatch due to the FIR structure. The channel impulse response is described with a complex state space model and then estimated from received data on the recent time interval. Numerical results show that the FIR channel estimation filter can provide more robust performance than conventional Kalman IIR filters when channel model parameters are not correct.     

Boundary implications for frequency response of interval FIR andIIR filters

It is shown that vertex implication results in parameter space apply to interval trigonometric polynomials. Subsequently, it is shown that the frequency responses of both interval FIR and IIR filters are bounded by the frequency responses of certain extreme filters. The results apply directly in the evaluation of properties of designed filters, especially because it is more realistic to bound the filter coefficients from above and below instead of determining those with infinite precision because of finite arithmetic effects. Illustrative examples are provided to show how the extreme filters might be easily derived in any specific interval FIR or IIR filter design problem     

DESIGN OF POLYPHASE WAVE DIGITAL FILTERS WITH APPROXIMATELY LINEAR PHASE

It is well known that IIR digital filters require quite fewer computations,comparedwith FIR filters,in order to meet stringent magnitude specifications when the phase distortioncan be tolerated.An approximately linear phase,however,can be also obtained with the IIRfilter by making use of a technique without increasing the complexity.Based on a certain numberof attenuation zeros in the pass band,a new approach is developed for the design of polyphasewave digital filters with exact magnitude responses and Chebyshev approximation of the desiredphase responses.The minimum number of attenuation zeros is estimated,and some examples areincluded.     

General IIR optical filter design for WDM applications usingall-pass filters

A general design algorithm is presented for infinite impulse response (IIR) bandpass and arbitrary magnitude response filters that use optical all-pass filters as building blocks. Examples are given for an IIR multichannel frequency selector, an amplifier gain equalizer, a linear square-magnitude response, and a multi-level response. Major advantages are the efficiency of the IIR filter compared to finite impulse response (FIR) filters, the simplicity of the optical architecture, and its tolerance for loss. A reduced set of unique operating states is discussed for implementing a reconfigurable multichannel selection filter     

The use of model reduction techniques for designing IIR filterswith linear phase in the passband

A technique to design IIR filters with linear phase in the passband is presented. This technique is based on model reduction of an FIR prototype using frequency weighting to improve the approximation in the transition region. Filters designed using the proposed technique are compared with linear-phase FIR designs and to IIR phase equalized designs with respect to computational complexity and group delay. It is shown that for highly selective filters, the proposed technique offers a good compromise     

Interpolated LIR Mth-band filter design with allpass subfilters

We propose a new allpass-based structure for the IIR Mth-and 2Mth-band filters. These filters consist of M allpass filters and an interpolation filter (sum of two allpasses). Consequently, the proposed structure is very efficient in implementation. By choosing the allpass phase appropriately, the resulting phase response of the IIR Mth-band filter becomes approximately linear. An example is designed and compared with FIR Mth-band filters