Pomegranate fallen leaves as a source of natural dye for mordant-free dyeing of wool

The application of metal mordants is usually necessary in dyeing of wool with natural dyes to improve the dye exhaustion and fastness properties. The majority of metal salts generally used as mordants are considered as toxic and it is important to find replacements for them. Plant sources with high content of tannins are good candidates as bio-mordant or colourant to overcome this drawback. In this study, the waste fallen leaves of pomegranate tree were used as a source of natural dye for the eco-friendly dyeing of wool fabric without the use of metal mordants. The dyeing process variables including dye concentration, dyebath pH, and temperature were optimised using response surface methodology to obtain the highest colour strength. The colour strength was increased by increasing the natural dye powder up to 100%owf while the optimum pH and dyebath temperature were 4 and 100°C, respectively. The sample dyed under the optimal condition exhibited good fastness properties against washing and light. This study approved the potential of Punica granatum fallen leaves for the dyeing of wool without any mordant, while high fastness properties were obtained.     

An alternative natural dye,almond shell waste: effects of plasma and mordants on dyeing properties

In this study, the effect of the plasma process and the possibility of replacing metallic mordants with plasma treatment were investigated in natural dyeing with almond shell waste as a novel natural colorant. The use of a smaller amount of metallic mordants and plant than most of the current natural dye applications is a major advantage of dyeing with almond shell extract. Plasma‐treated and untreated wool fabrics were dyed without mordant and using a smaller amount (0.2 g/l) of alum, iron(ii ) sulfate and copper(ii ) sulfate. Three mordanting methods, namely premordanting, simultaneous mordanting and post‐mordanting, were applied. Colour measurements and light and wash fastness values were compared. Significant colour differences were observed among the mordanting methods. Simultaneous mordanting resulted in the lightest colours with all the mordants. Generally, post‐mordanting produced duller colours and lower a* and b* values than premordanting. The plasma process generated significant colour value differences and colour yield increases, giving more homogeneous dyeing visually, and also ensured a greater impact of mordanting. However, compared with metallic mordants, plasma itself did not create completely different colour shades and fastness improvement. It was necessary to use mordants in order to achieve increased fastness properties (especially light fastness) and a different colour gamut.     

Oxygen plasma pretreatment improves dyeing and antimicrobial properties of wool fabric dyed with natural extract from pomegranate peel

This paper presents the application of conventional potassium aluminium sulphate wool mordanting and a biochemical method with silver nitrate (as antimicrobial agent and mordant)_, alone and in combination with oxygen plasma, as part of comprehensive research into pretreatment processes for wool dyeing with natural extract from pomegranate peel (Punica granatum L.). Pretreatment with oxygen plasma significantly improved the hydrophilicity and tensile strength of all tested samples and showed that oxygen plasma can improve K/S, washing fastness, and even replace certain mordants in wool dyeing with natural pomegranate dye. All dyed samples exhibited good antibacterial activity against Staphylococcus aureus, which can be contributed to the phenol content in pomegranate dye. Only after 28 days of intensive ageing in natural weathering conditions did K/S and antibacterial activity against Klebsiella pneumoniae slightly decrease in dyed samples pretreated with oxygen plasma.     

Application of rare earth as mordant for the dyeing of ramie fabrics with natural dyes

Selecting appropriate metallic compounds as mordants is essential for dyeing with natural dyes. This paper presents the application of rare earth compounds as mordant for the dyeing of ramie fabrics with four kinds of natural dyes. The influences of pre-mordanting, simultaneous mordanting, and post-mordanting on the dyeing effect were explored. The post-mordanting was proved to give rise to the highest dye uptake. The effects of dyeing conditions including dyeing temperature and time, dyeing bath pH and the concentration of rare earth on the dye uptake were investigated systematically. The fabrics dyed with natural dyes in presence of rare earth as mordant exhibited high color shade stability in the baths with pH varying from being acidic to neutral and alkaline. Employing rare earth as mordant apparently raised the color fastness to washing, rubbing and light of the ramie fabrics dyed with the natural extracts. In comparison with the commonly used metallic salts, using rare earth chlorides as mordants can greatly reduce the ionic concentration employed in natural dyeing. This study proved that rare earth would be a kind or promising environmentally friendly mordant in natural dyeing.     

The colour and fastness of natural saffron

Cotton and wool fabrics have been dyed with the aqueous extract of saffron containing α-crocin as the main colorant species. The dyeings were carried out with and without metal salts as mordants. The wash and light fastness of the dyed fabrics was studied. The colour of the fabrics was investigated in terms of CIE L* C* H* values.     

An innovative approach to the preparation of coloured and multifunctional silk material with the natural extracts from chestnut shell and black rice bran

In order to reutilise the byproducts of foods and crops to benefit the environment and economise on resources, the natural extracts from chestnut shell and black rice bran were applied in the simultaneous dyeing and multifunctionalisation of silk fabrics. In this work, the influence of pH value on dyeing properties was studied. The effects of the ratio of chestnut shell and black rice bran extracts and the application of mordants (aluminium potassium sulphate and ferrous sulphate) on the dyeing performance as well as anti-ultraviolet and antioxidant properties of treated silk were also discussed. The results showed that deep-coloured silk fabrics can be obtained when dyed with the two natural extracts as the pH value of the dyebath approached 3. The ratio of the two natural extracts and the use of the mordants have significant effects on colour depth, colour hue, colour fastness, and the functionalities of dyed silk fabrics. Combination dyeing and mordanting are able to enrich the colour hues of dyed fabrics. The washing, rubbing, and light fastness of the dyed fabrics after mordanting can be rated higher than grade 4. Moreover, the silk after combination dyeing has good UV protection performance (UPF > 30) and antioxidant activity. In addition, the functionalities of treated fabrics showed excellent washing fastness. This study reveals that chestnut shell and black rice bran extracts are suitable as natural colourants and multifunctional finishing agents for the preparation of coloured and multifunctional silk materials.     

Dyeing,fastness, and deodorizing properties of cotton,silk, and wool fabrics dyed with coffee sludge (Coffea arabica L.) extract

A natural colorant was extracted from Coffea arabica L., using water as extractant at 90°C for 90 min. Studies have been made on the dyeing, color fastness, and deodorization properties of cotton, silk, and wool fabrics dyed with Coffea arabica L. extract solutions. The best mordants were found to be FeSO_4, CuSO₄, and SnSO₄ for improving the color strength (K/S) of cotton, silk, and wool fabrics. Mordants MnSO₄, ZnSO₄, and NiSO₄ for cotton (Rating 3), and all mordants except MnSO₄ for silk (Rating 3), mordants CuSO₄, FeSO₄, CoSO₄, Al₂(SO₄)₃, and MnSO₄ for wool (Rating 4) were the best mordants to improve the light fastness. It was found that FeSO₄ and CuSO₄ were the best mordants for the improvements of color strength (K/S) and light fastness for silk and wool fabrics. In addition, it was found that cotton, silk, and wool fabrics dyed with the Coffea arabica L. extract showed good deodorization performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 251–257, 2007     

Colorimetric and fastness studies and analysis by reversed‐phase high‐performance liquid chromatography with diode‐array detection of the dyeing of silk fabric with natural dye Helichrysum arenarium

In this study, silk fabric samples were dyed by various procedures using Helichrysum arenarium extracts. Alum, ferrous sulfate, stanium chloride, calcium nitrate, and potassium bitartrate were used as mordants. Reversed‐phase high‐performance liquid chromatography with diode‐array detection was utilised for identification of the dyes present in the dyed silk fabrics and the plant extracts. The extraction of dyes was carried out with a hydrochloric acid/methanol/water (2:1:1 v/v/v) mixture. The colour coordinates and K/S values, as well as wash, light, and rub fastness, were determined.     

Dyeing properties of textiles by Turkish hazelnut (Corylus colurna): leaves,coat, shell and dice

Turkey has a great number of hazelnut trees that possess nutritious components. However, only the inside part of the hazelnut is used as a nutrient, while the rest of it is waste. This study suggests that the waste parts of the Turkish hazelnut could be used as a natural dye for dyeing textile fabrics. The dyeing properties of the leaves, coat, shell and dice of the hazelnut were studied on wool, cotton and viscose fabric by using three different mordants: copper sulphate, iron sulphate and aluminium sulphate. The selected dyed fibre sample surfaces were observed using a scanning electron microscope. The colour strength (K/S), light, washing, rubbing, and perspiration fastness levels of the dyed fabrics were investigated. The experimental natural dyeing results indicate that waste hazelnut‐based products can be used as a natural dye for textile coloration.     

Neutral dyeing of wool and wool/polyester blend fabrics using sulphatoethylsulphone reactive‐disperse dyes

Two models of temporarily anionic sulphatoethylsulphone reactive disperse dyes were applied to wool, polyester and wool/polyester blend fabrics at different dyeing pH. Maximum exhaustion values and colour yield were observed at pH 7. The results showed that reactive disperse dyes containing bis‐sulphatoethylsulphone reactive groups were more convenient for neutral dyeing of wool and wool/polyester blend fabrics if compared with a dye containing a mono‐sulphatoethylsulphone group. Excellent to very good wet fastness properties on all dyed fabrics were achieved.     

A method for dyeing cotton fabric with anthocyanin dyes extracted from mulberry (Morus rubra) fruits

For the first time, the natural anthocyanin dyes (mainly consisting of cyanidine 3‐glycoside) extracted from mulberry (Morus rubra) fruits has been successfully used to dye cotton fabric, with a dyeing property performance good enough for potential commercial applications. In this study, succinic acid was firstly incorporated into cotton fabrics by esterification to the hydroxyl groups of cellulose, forming an anionic site for the dyes. The performance of the modified material was characterised by Fourier transform infrared spectroscopy and tensile strength. Results showed that the tensile strength of cotton fabrics was mostly retained after modification. The anthocyanin extracts from mulberry fruits were used to study the dyeability of the control and modified cotton fabrics. Red and deep purple (aubergine) are two main shades of cotton fabrics dyed with mulberry fruit extracts. Most importantly, aubergine shade is rare in cotton fabrics dyed with natural dyes. Modification with succinic acid clearly increased the colour strength of the dyed cotton fabric. The colour strength of dyed cotton fabric was improved from 2.7 to 5.3 in the case of dyeing without mordants, and from 3.2 to 6.9 in the case of dyeing with tin mordanting. Meanwhile, the colour fastness was improved by 0.5–2 grades with increasing succinic acid concentration in the finish solution. The colour fastness to perspiration, crocking, light, and washing of fabric dyed with simultaneous tin mordanting and modified with 30 g l^?1 of succinic acid was found to be acceptable, with a grey scale grade of at least 3. As for home laundering, neutral soapy solution was more acceptable than alkaline soapy solution.     

Fastness and dyeability improvement of wool fabric pretreated with oxalate derivatives

Wool fabrics were pretreated with calcium and sodium oxalate in acidic and alkaline pH media. The pretreated and untreated fabric samples were then dyed in the same bath with acid dyes by the exhaustion technique. The pretreated fiber sample surfaces were observed using a scanning electron microscope. The color strength and fastness properties of the fabrics were investigated. The results of the study showed that pretreatment with oxalate derivatives can be used as a means of improving the dyeability of wool fibers. As the dyed, pretreated wool fabrics had higher color strength and fastness results than the untreated wool fabrics, the mechanical properties were affected negatively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Evaluation of antimicrobial and dyeing properties of walnut (Juglans regia L.) green husk extract for cosmetics

Walnut green husk is one of the main waste products from walnut and could be used as a source of natural dyeing compounds such as juglone. The present study was conducted to evaluate the effective use of walnut green husk extract as a natural hair dye. Dyeing properties, fastness and antimicrobial behaviours of dyed hair and also a skin irritation test for natural hair dye on rat skin were examined. When the extract was mixed with ascorbic acid as a developer, ferrous sulphate as a mordant, and Aloe vera extract used as a secondary mordant and also a cosmetic ingredient, the reaction resulted in a dark‐brown colour on hair samples. The dyed hair exhibited appropriate colour strength having excellent morphology for a hair surface coated with dye molecules. In addition, the dyed hair possessed good resistance to washing and daylight fastness, without any irritant properties as shown in a rat model, although high concentrations of iron‐based mordant may be problematic for long‐term usage. This paper also suggests the use of natural mordants such as lactic and oxalic acids to avoid any probable risks. Walnut green husk extract was an appropriate natural hair dyeing agent in practice and showed maximum antimicrobial activity compared with semi‐synthetic and commercial hair dyes. The results demonstrated that walnut green husk can be used as an economical, valuable, eco‐friendly and safe source of dyeing and antimicrobial agents for cosmetic products.     

Improving the dyeability of wool by treatment with chitosan

A study of pretreatment of wool fabrics with chitosan by a pad-dry method has been carried out. The pretreatment effectively eliminates differences in dyeing behaviour between damaged and undamaged wool fibres, with an increase in the rate of dye uptake and the exhaustion of acid and reactive dyes. Penetration of the fibre by dyes has been followed using fluorescence microscopy and the role of the chitosan coating in the dyeing process clarified. Similar colour fastness properties were obtained on both untreated and chitosan-treated wool fabrics. The chitosan coating on wool fabrics has been examined by scanning electron microscopy. Evidence for the presence of chitosan was sought using a colorimetric method. It is believed that an approximately uniform and adherent chitosan sheath is formed on individual wool fibres.     

关于活性染料及分散染料色牢度几个热点问题的探讨

由于纺织品服装的染色牢度要求越来越高，特别是活性染料浅色染色物的耐晒牢度和深浓色织物的水洗牢度和湿摩擦牢度；分散染料染色物热迁移牢度等，成为提高纺织品服装质量的瓶颈，引起广泛关注的热点问题。本文就染料选用、助剂开发及染料加工工艺合理化进行详细探讨，给出解决办法。有15篇参考文献。     

牡丹花天然植物染料对羊毛织物染色性能的研究

将黄色牡丹花天然植物染料用于羊毛织物的染色,探讨了媒染剂和染色方法对羊毛织物染色效果的影响,通过单因素试验和正交试验筛选出以明矾为媒染剂时牡丹花黄色染料对羊毛织物的最佳染色工艺条件,得到了色泽鲜艳的黄色羊毛织物.     

Synthesis,stability and printing properties of a novel 2‐sulphophenoxy‐4‐chloro‐s‐triazine reactive dye for ink‐jet printing of wool

We report here the synthesis and characterisation of a new medium‐reactivity reactive dye containing 2‐sulphophenoxy‐4‐chloro‐s‐triazine, having enhanced the activity of the chlorine atom for further substitution by the functional groups carried by wool fibre. In addition, a dichloro‐s‐triazine dye was also synthesised for the purpose of comparison. The progress of synthesis reactions and purity of the dyes were determined using capillary electrophoresis and thin layer chromatography. The molecular structure and the chemical compositions of the synthesised dyes were confirmed using Fourier Transform–infrared spectral data and elemental analyses. The inks containing the synthesised dyes were formulated and ink‐jet‐printed onto wool fabrics and then the printed fabrics were steamed at 102°C. Compared with the dichloro‐s‐triazine dye, superior performance in terms of ink stability, K/S and dye fixation was observed for the new 2‐sulphophenoxy‐4‐chloro‐s‐triazine dye. In addition, the light fastness of the fabric printed with the inks containing the new dye was 0.5‐grade greater than that of the fabric printed with the inks containing the dichloro‐s‐triazine dye, and no changes in shade and staining were observed following wash fastness tests of the fabrics printed with the inks containing the new dye.     

Iron Complexed Acid Mordant Dyes and Their Application on Nylon 6 and Wool

The replacement of chromium (III) by safer iron (II) has been investigated, using three commercial azo acid mordant dyes. These dyes have been applied to nylon 6 and wool fabrics and the dye exhaustion has been calculated at different temperatures. Color properties and fastness to light, washing and rubbing have been described. The characterization of the unmetallized and metallized dyes was investigated by HPLC analysis, thin layer chromatography, and UV/Vis spectroscopic techniques. Lightfastness shows that Fedye3 is a strong candidate for dyeing nylon 6 and wool fabrics with high lightfastness.     

Dyeing and deodorizing properties of cotton,silk, wool fabrics dyed with Amur Corktree,Dryopteris crassirhizoma,Chrysanthemum boreale,Artemisia extracts

This study used four kinds of natural colorant solutions extracted from Amur Corktree, Dryopteris crassirhizoma, Chrysanthemum boreale, Artemisia using water at 90°C for 90 min with a liquor ratio (solid natural colorant material/solvent water, weight ratio) of 1/10. The dyeing, color fastness, deodorizing properties of cotton, silk, wool fabrics dyed with natural colorant extracts were compared. These properties were found to be significantly dependent on the extract concentration, colorant structure, fabric type. Color fastness (light, water, perspiration fastness) ranged between second and fifth grades and deodorizing performance of fabrics dyed with various natural colorant extracts between 34 and 99%. It is worth noting that the use of natural colorants notably enhanced the deodorizing performance. Wool fabrics showed the highest performance increase at 98–99%, followed by silk and cotton. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The evaluation of procedures for dyeing silk with buckthorn and walloon oak on the basis of colour changes and fastness characteristics

In this study, silk fabric samples were dyed according to various procedures with buckthorn (Rhamnus petiolaris Boiss) and walloon oak (Quercus ithaburensis Decaisne) extracts. Reversed‐phase high‐performance liquid chromatography with diode‐array detection was utilised for the identification of dyes present in the dyed silk fabrics and the plant extracts. The extraction of dyes was carried out with a hydrochloric acid/methanol/water (2:1:1; v/v/v) mixture. The colour coordinates of the silk fabrics were measured, and the rubbing, wash and light fastness properties of the dyed silk materials were determined and are discussed.