Multifunctional performance of gC<Subscript>3</Subscript>N<Subscript>4</Subscript>-BiFeO<Subscript>3</Subscript>-Cu<Subscript>2</Subscript>O hybrid nanocomposites for magnetic separable photocatalytic and antibacterial activity

Highly active gC₃N₄-BiFeO₃-Cu₂O nanocomposites were successfully prepared via a facile, cost effective and eco-friendly method of hydrothermally wet precipitation combined with ultrasonic dispersion process. The prepared samples were characterized by XRD, FTIR, HRSEM, EDS, TEM, UV–Vis DRS, PL, VSM, BET and electrochemical properties. By means of these analysis for examine the crystal phase, nanostructure, band gap and light-harvesting properties were carried out. UV-DRS spectra indicate that the bandgap of g-C₃N₄ (2.7 eV) reduced to 2.59 and 2.21 eV by mixed with corresponds to BiFeO₃ and BiFeO₃/Cu₂O nanomaterials. The ideal photocatalytic activity of the gC₃N₄-BiFeO₃-Cu₂O nanocomposites, where RhB dye under visible light irradiation which was up to 4.36 and 2.52 times as the higher photodegradation ability to compare pristine g-C₃N₄ and gC₃N₄-BiFeO₃ catalyst. The magnetization was confirmed by VSM studies, and hence, after the photocatalytic reaction, the magnetically separable catalyst can be quickly separated from the water by an external magnetic field. The superior photocatalytic performance is due to the synergistic effect on the interface of BiFeO₃/Cu₂O in the gC₃N₄-BiFeO₃-Cu₂O nanocomposites has reduced the bandgap which enables high separation efficiency of the charge carrier, suppressed recombination rate and their high surface area. Moreover, the chief gC₃N₄-BiFeO₃-Cu₂O catalyst can exhibited the lesser charge transfer resistance (impedance), enhances of photocurrent responses, whereas exposed to the development of photocatalytic appearance and more charge carrier ability. Also, the antibacterial activity of the gC₃N₄-BiFeO₃-Cu₂O nanocomposite has showing a well deactivation in both G⁺ (S. aureus) and G^? (E. coli) bacteria’s whereas compare to other prepared samples.     

In<Subscript>2</Subscript>S<Subscript>3</Subscript> nanoparticles dispersed on g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanosheets: role of heterojunctions in photoinduced charge transfer and photoelectrochemical and photocatalytic performance

Fast recombination of photogenerated charge carriers is a major problem in the photoelectrochemical and photocatalytic processes. In this work, we report significantly improved PEC performance of a nanocomposite consists of In₂S₃ nanoparticles dispersed on g-C₃N₄ nanosheets synthesized by a simple and facile wet chemical route. The results of high-resolution TEM study show that the obtained In₂S₃ nanoparticles of size 10–20 nm exist in cubic phase and are uniformly dispersed on the surface of g-C₃N₄ nanosheets. The In₂S₃/g-C₃N₄ nanocomposite with 25 weight percentage of In₂S₃ exhibits 8.5 times higher photocurrent density than the single-phase g-C₃N₄ under visible light illumination. The enhanced photocurrent density exhibited by the In₂S₃/g-C₃N₄ nanocomposite is attributed to the efficient separation of photogenerated charge carriers. The charge transfer mechanism in In₂S₃/g-C₃N₄ heterojunction was studied by a series of experiments, such as electrochemical impedance spectroscopy, photoelectrochemical measurement and photoluminescence emission spectroscopy. The intimate interface promotes the charge transfer and inhibits the recombination rate of photogenerated electron–hole pairs, which significantly improves the photoelectrochemical performance. A detailed charge transfer mechanism is discussed based on the Mott–Schottky plot study. This heterojunction material is found to be an efficient photocatalyst for the degradation of both cationic rhodamine B dye and anionic methyl orange dye as the lifetime of photogenerated charge carriers is higher in the composite than in single-phase In₂S₃ and g-C₃N₄. A strong correlation between the photoelectrochemical and the photocatalytic performances is observed in this composite.     

TiO<Subscript>2</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> heterojunctions: <Emphasis Type="Italic">In situ</Emphasis> fabrication mechanism and enhanced photocatalytic activity

In situ fabrication of TiO₂/g-C₃N₄ (TCN) heterojunctions was achieved by a modified sol-gel method. TG analysis was employed to determine the content of TiO₂ in TCN composites. XRD, FTIR, TEM and HRTEM were used to analyze the phase composition, functional groups, morphology and microstructure of as-obtained products, respectively. Based on the measurement of surface Zeta potential of g-C₃N₄, a possible mechanism on in situ fabrication of TCN heterojunctions was concluded. The control experiments indicated that TCN heterojunctions exhibited better photocatalytic performance than either TiO₂ or g-C₃N₄, suggesting that the enchanced photocatalytic activity could be realized by TCN heterojunctions. Then, the evaluation of parameters affecting the photocatalytic performance of TCN heterojunctions was investigated. Even after five cycles, TCN heterojunctions still maintained high photocatalytic activity, exhibiting the good photocatalytic stability. UV-vis absorption spectra showed that almost all MB molecules were decomposed in the photocatalytic process. Finally, the possible mechanism on enhanced photocatalytic performance of TCN heterojunctions was discussed.     

Enhanced visible light photocatalytic activity for g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/SnO<Subscript>2</Subscript>:Sb composites induced by Sb doping

In this paper, g-C₃N₄/SnO₂:Sb composite photocatalysts were fabricated by in situ loading Sb-doped SnO₂ (SnO₂:Sb) nanoparticles on graphitic carbon nitride (g-C₃N₄) nanosheets via a facile hydrothermal method. The synthesized g-C₃N₄/SnO₂:Sb composites delivered enhanced visible light photocatalytic performance for degradation of rhodamine B in comparison with g-C₃N₄/SnO₂ composites without doping Sb. Various techniques including XRD, SEM, TEM, FTIR, XPS, PL and electrochemical method were employed to demonstrate the successful fabrication of g-C₃N₄/SnO₂:Sb composite and to investigate the enhanced mechanism of photocatalytic activity. The improvement of visible light absorption and the promotion of separation efficiency and interfacial transfer of photogenerated carriers induced by Sb doping were responsible for the enhancement of photocatalytic activity. This study provides a simple and convenient method to synthesize a visible light responsive catalyst with promising performance for the potential application in environmental protection.     

Novel Bi<Subscript>12</Subscript>TiO<Subscript>20</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> composite with enhanced photocatalytic performance through Z-scheme mechanism

Novel Bi₁₂TiO₂₀/g-C₃N₄ composite was successfully prepared with Bi₁₂TiO₂₀ nanoparticles embedded within the fluffy crumpled g-C₃N₄ nanosheets. Bi₁₂TiO₂₀/g-C₃N₄ composites exhibit superior photoactivity and stability. As compared with g-C₃N₄ and Bi₁₂TiO₂₀, the photocatalytic efficiency of Bi₁₂TiO₂₀/g-C₃N₄ is effectively enhanced about 1.8- and 4.9-fold, respectively. Based on the trapping experiment, ^·OH and ^·O₂^? radicals are the dominant reactive oxygen species involved in the photocatalytic process. The proposed Z-scheme mechanism of charge transfer markedly promotes the carriers’ migration and separation, leading to the enhanced photocatalytic performance.     

Efficient visible-light driven photocatalysts: coupling TiO<Subscript>2</Subscript>(AB) nanotubes with g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> nanoflakes

The wide application of the titanium dioxide (TiO₂) as the photocatalysts is greatly hindered by its intrinsic large band gap and usually fast electron–hole recombination. Here, we reported the exploration of coupling g-C₃N₄ nanoflakes to TiO₂ nanotubes with the anatase and TiO₂(B) mixed phases (TiO₂(AB)) toward the efficient visible-light-driven hybrid photocatalyst. It is found that coupling TiO₂(AB) nanotubes with g-C₃N₄ nanoflakes could bring a profoundly extension the visible light adsorption capacity and enhanced photogenerated carrier separation. Accordingly, they exhibit much higher efficient photocatalytic activities toward the degradation of sulforhodamine B under the visible light irradiation, which is enhanced for nearly 15 times to those of the TiO₂(AB) and g-C₃N₄, suggesting their promising practical applications as novel and efficient semiconductor photocatalysts for the water purification.     

In-situ construction of 2D direct Z-scheme g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> homojunction with high photocatalytic activity

Constructing all-solid-state Z-scheme junction is a very effective strategy to design highly active photocatalysts for solar energy conversion and environmental purification. We herein firstly construct 2D g-C₃N₄/g-C₃N₄ Z-scheme homojunction by using a bottom-up approach, during which the supramolecular complex is initially formed, followed by a facile thermal polycondensation. Based on the active species trapping experiments, Mott–Schottky test and band edge position analysis, the prepared 2D nanosheet g-C₃N₄/g-C₃N₄ homojunctions are found to be Z-scheme type, different from those available reported ones with a type-II energy alignment. Benefiting from the specific 2D morphology with large exposed surface area and Z-scheme junction with efficient separation and high redox abilities of the photoinduced electrons and holes, the obtained 2D g-C₃N₄/g-C₃N₄ homojunctions are much more active than the conventional g-C₃N₄/g-C₃N₄ homojunction (CN-MT) and bulk g-C₃N₄ (CN-M) under visible light irradiation, validating by the high rhodamine degradation rate of 0.833 h^?1, which is about 3.9 and 15.4 times higher than that of CN-MT (0.214 h^?1) and CN-M (0.054 h^?1), respectively. The present work sheds light on design of novel Z-scheme photocatalysts with specific morphology and thus further application in the field of environment or energy.     

SnO2/g-C3N4 photocatalyst with enhanced visible-light photocatalytic activity

Visible light-responsive SnO₂/g-C₃N₄ nanocomposite photocatalysts were prepared by ultrasonic-assisting deposition method with melamine as a g-C₃N₄ precursor. The as-prepared photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy, Fourier transform infrared spectra and photoluminescence emission spectra. The photocatalytic activities of the samples were evaluated by monitoring the degradation of methyl orange solution under visible light irradiation (wavelength ≥400 nm). The results show that the SnO₂ nanoparticles with the size of 2–3 nm are dispersed on the surface of g-C₃N₄ evenly in SnO₂/g-C₃N₄ nanocomposites. The visible-light photocatalytic activity of SnO₂/g-C₃N₄ nanocomposites is much higher than that of pure g-C₃N₄, and increases at first and then decreases with the increment of the content of g-C₃N₄ in the nanocomposites. The visible-light photocatalytic mechanism of the investigated nanocomposites has been discussed.     

Magnetically separable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@TiO<Subscript>2</Subscript> nanospheres: preparation and photocatalytic activity

A facile and efficient approach for the fabrication of Fe₃O₄@TiO₂ nanospheres with a good core–shell structure has been demonstrated. Products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The results showed that Fe₃O₄@TiO₂ nanocomposites exhibited high degree of crystallinity, excellent magnetic properties at room temperature. Furthermore, the as-prepared Fe₃O₄@TiO₂ nanocomposites exhibited good photocatalytic activity toward the degradation of Rhodamine B (RhB) solution. Additionally, the recycling experiment of Fe₃O₄@TiO₂ nanocomposites had been done, demonstrating that Fe₃O₄@TiO₂ nanocomposites have high efficiency and stability.     

N-TiO<Subscript>2</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/Up-conversion phosphor composites for the full-spectrum light-responsive deNO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> photocatalysis

The ternary composites consisted of nitrogen-doped titanium dioxide, carbon nitride and up-conversion phosphors (UP) were successfully prepared by a solvothermal method. The heterojunction could be formed when N-TiO₂ and g-C₃N₄ were combined together. The composite of N-TiO₂/g-C₃N₄@UP had excellent ultraviolet, visible and infrared light absorption, indicating the possibility for the utilization of full spectrum of solar light. When N-TiO₂ was coupled with g-C₃N₄ and up-conversion phosphors to form a composite, the visible light and NIR light absorption of the samples increased. The ternary composite N-TiO₂/g-C₃N₄@G-UP presented reasonable deNO _x performance of about 8.0% under the irradiation of IR light of 980 nm. The intensification of the photocatalysis might be realized by utilizing up-conversion phosphors, which could convert low-energy NIR light into high-energy photons (visible light) and increase the efficient irradiation on the surface of photocatalyst.     

Synthesis of graphene oxide/Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite with enhanced visible-light photocatalytic activity

The nano-scale Ag₃PO₄ was successfully synthesized by the silver ammonia complexing precipitation method at room temperature. And the Graphene oxide (GO)/Ag₃PO₄ nanocomposites with different contents of GO were successfully synthesized using the electrostatic driving method. The as-prepared GO/Ag₃PO₄ nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), confirming that Ag₃PO₄ were highly dispersed to GO sheet. The photocatalytic properties of GO/Ag₃PO₄ were evaluated by the degradation of Methyl Orange (MO) under visible light irradiation and solar irradiation respectively. The results showed that the photocatalytic efficiencies of GO/Ag₃PO₄ nanocomposites had enhanced largely and the kinetics reaction models were followed first-order. Furthermore, 5% GO/Ag₃PO₄ exhibited the highest photocatalytic activity on degradation of MO under visible-light irradiation. The improved photocatalytic performances of the GO/Ag₃PO₄ nanocomposites mainly attributed to the introducing of GO, which benefit for electron transfer and inhibit the recombination of electron–hole pairs, promoting the practical application of Ag₃PO₄ in water purification.     

Photocatalytic activity of polypyrrole/TiO<Subscript>2</Subscript> nanocomposites under visible and UV light

A series of polypyrrole (PPy)/titanium dioxide (TiO₂) nanocomposites were prepared in different polymerization conditions by ‘in situ’ chemical oxidative polymerization. The nanocomposites were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy spectra (XPS), and UV–Vis diffuse reflectance spectra. The photocatalytic degradation of methyl orange (MO) was chosen as a model reaction to evaluate the photocatalytic activities of TiO₂/PPy catalysts. The results show that a strong interaction exists at the interface between TiO₂ and PPy, the deposition of PPy on TiO₂ nanoparticles can alleviate their agglomeration, PPy/TiO₂ nanocomposites show stronger absorbance than neat TiO₂ under the whole range of visible light. The obtained PPy/TiO₂ nanocomposites exhibit significantly higher photocatalytic activity than the neat TiO₂ on the degradation of MO aqueous solution under visible and UV light illumination. The reasons for improving the photocatalytic activity were also discussed.     

A facile one step synthesis of SnO<Subscript>2</Subscript>/CuO and CuO/SnO<Subscript>2</Subscript> nanocomposites: photocatalytic application

Here novel photocatalysts, SnO₂/CuO and CuO/SnO₂ nanocomposites were successfully synthesized by chemical method at room temperature. X-ray Diffraction (XRD), transmission electron microscopy (TEM), Fourier transform Infrared (FT-IR), UV–Visible (UV–Vis) and photoluminescence (PL) spectroscopy were utilized for characterization of the nanocomposites. The photocatalytic activity of the nanocomposites was investigated. The hybrid nanocomposites exhibited high photocatalytic activity as evident from the degradation of methylene blue (MB) dye. The result revealed substantial degradation of the MB dye (92 and 69.5% degradation of SnO₂/CuO and CuO/SnO₂, respectively) under visible light illumination with short period of 30 min. Their large conduction band potential difference and the inner electrostatic field formed in the p–n heterojunction provide a strong driving force for the photogenerated electrons to move from Cu₂O to SnO₂ under visible light illumination. The excellent photodegradation of methylene blue suggested that the heterostructured SnO₂/CuO nanocomposite possessed higher charge separation and photodegradation abilities than CuO/SnO₂ nanocomposite under visible light irradiation.     

Oxalic acid assisted hydrothermal synthesis and optical absorption property of WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> nanocomposites

The WO₃/TiO₂ nanocomposites were successfully prepared via a facile oxalic acid assisted hydrothermal process. The oxalic acid played a vital role on the preparation of WO₃/TiO₂ nanocomposites. Notably, it has been observed that the nanocomposites exhibited the wider absorption edge, and the higher photocatalytic activity, compared with pure TiO₂. In addition, the photocatalytic mechanism was proposed, and it elaborated that WO₃/TiO₂ nanocomposite promoted the separation of the photoproduction carriers, and improved photocatalytic activity. The WO₃/TiO₂ nanocomposite may have a potential application as a UV–visible photocatalyst.     

Hydrogen production using zinc-doped carbon nitride catalyst irradiated with visible light

Abstract

Recently, graphitic carbon nitride (g-C₃N₄) has been investigated as a photocatalyst for water splitting and organic dye degradation. In this study, we have developed a simple soft-chemical method of doping Zn into g-C₃N₄ to prepare a metal-containing carbon nitride. The doping was confirmed by x-ray photoelectron spectroscopy, and diffusion reflectance spectra revealed a significant red shift in the absorption edge of Zn/g-C₃N₄. This hybrid material shows high photocatalytic activity and good stability for hydrogen evolution from an aqueous methanol solution under visible light irradiation (λ≥420 nm). The hydrogen evolution rate was more than 10 times higher for a 10%-Zn/g-C₃N₄ sample (59.5 μmol h^?1) than for pure g-C₃N₄. The maximum quantum yield was 3.2% at 420 nm.     

Hydrogen production using zinc-doped carbon nitride catalyst irradiated with visible light

Recently, graphitic carbon nitride (g-C₃N₄) has been investigated as a photocatalyst for water splitting and organic dye degradation. In this study, we have developed a simple soft-chemical method of doping Zn into g-C₃N₄ to prepare a metal-containing carbon nitride. The doping was confirmed by x-ray photoelectron spectroscopy, and diffusion reflectance spectra revealed a significant red shift in the absorption edge of Zn/g-C₃N₄. This hybrid material shows high photocatalytic activity and good stability for hydrogen evolution from an aqueous methanol solution under visible light irradiation (λ≥420 nm). The hydrogen evolution rate was more than 10 times higher for a 10%-Zn/g-C₃N₄ sample (59.5 μmol h⁻¹) than for pure g-C₃N₄. The maximum quantum yield was 3.2% at 420 nm.     

Multidimensional CdS nanowire/CdIn<Subscript>2</Subscript>S<Subscript>4</Subscript> nanosheet heterostructure for photocatalytic and photoelectrochemical applications

Nanomaterial shapes can have profound effects on material properties,and therefore offer an efficient way to improve the performances of designed materials and devices.The rational fabrication of multidimensional architectures such as one dimensional (1D)-two dimensional (2D) hybrid nanomaterials can integrate the merits of individual components and provide enhanced functionality.However,it is still very challenging to fabricate 1D/2D architectures because of the different growth mechanisms of the nanostructures.Here,we present a new solventmediated,surface reaction-driven growth route for synthesis of CdS nanowire (NW)/CdIn2S4 nanosheet (NS) 1D/2D architectures.The as-obtained CdS NW/CdIn2S4 NS structures exhibit much higher visible-light-responsive photocatalytic activities for water splitting than the individual components.The CdS NW/CdIn2S4 NS heterostructure was further fabricated into photoelectrodes,which achieved a considerable photocurrent density of 2.85 mA.cm-2 at 0 V vs.the reversible hydrogen electrode (RHE) without use of any co-catalysts.This represents one of the best results from a CdS-based photoelectrochemical (PEC) cell.Both the multidimensional nature and type Ⅱ band alignment of the 1D/2D CdS/CdIn2S4 heterostructure contribute to the enhanced photocatalytic and photoelectrochemical activity.The present work not only provides a new strategy for designing multidimensional 1D/2D heterostructures,but also documents the development of highly efficient energy conversion catalysts.     

Solar photocatalytic generation of hydrogen under ultraviolet-visible light irradiation on (CdS/ZnS)/Ag<Subscript>2</Subscript>S + (RuO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript>) photocatalysts

In order to efficiently use the UV-vis light in the photocatalytic reaction, a novel (CdS/ZnS)/Ag₂S + RuO₂/TiO₂ was synthesized by chemical coprecipitation and metal ion implantation. The composition and structure of this composite were characterized by BET, UV-vis spectroscopy, SEM, XRD and EDX. This composite exhibited much higher photocatalytic activity for the generation of hydrogen (H₂).     

Visible-light activities of Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiVO<Subscript>4</Subscript> composite photocatalysts

Gd₂O₃/BiVO₄ composite photocatalysts were hydrothermal synthesized and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and UV–vis diffusion reflectance spectra; all the composite photocatalysts exhibited enhanced photocatalytic activities than the pure BiVO₄ for degradation of methyl orange under visible-light irradiation. The improved activity of composites was discussed and ascribed to the electron-scavenging effect of dopants.     

Fabrication of plate-on-plate Z-scheme SnS<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterojunction photocatalysts with enhanced photocatalytic activity

A class of direct plate-on-plate Z-scheme heterojunction SnS₂/Bi₂MoO₆ photocatalysts was synthesized via a two-step hydrothermal method. The materials were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectra, Fourier transform infrared photoluminescence emission spectra, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity was estimated via the degradation of crystal violet (CV) and ciprofloxacin (CIP). The experimental results indicated that the 5 wt% SnS₂/Bi₂MoO₆ composites exhibited significantly enhanced performance in contrast to pure Bi₂MoO₆ or SnS₂ nanoflakes, and were also superior to the popular TiO₂ (P25). The degradation reaction accorded well with the first-order reaction kinetics equation; the rate constant of CV using a SnS₂ content of 5 wt% photocatalyst was ~?3.6 times that of the Bi₂MoO₆ and 2.4 times that of SnS₂. Furthermore, a SnS₂ content of 5 wt% exhibited a 1.7 times higher photocatalytic activity of CIP than that of pure Bi₂MoO₆, and 1.3 times that of pure SnS₂. Radical trapping experiments and an electron spin resonance technique indicated that h⁺ and ·OH were the dominant active species involved in the degradation process. A plasmonic Z-scheme photocatalytic mechanism was proposed to explain the superior photocatalytic activities and efficient separation of photogenerated electrons and holes.