37-GHz bandwidth monolithically integrated InP HBT/evanescently coupled photodiode

In this letter, we demonstrate a monolithically integrated optoelectronic integrated circuit (OEIC) for 1.55-/spl mu/m wavelength application. The presented OEIC consists of an evanescently coupled photodiode (ECPD) and a single-stage common-base InP-InGaAs heterojunction bipolar transistor (HBT) amplifier. The guide structure was grown first by metal-organic chemical vapor deposition and pin/HBT was then regrown by molecular beam epitaxy. The ECPD exhibits a responsivity of 0.3 A/W and a -3-dB electrical bandwidth of 30 GHz. The photoreceiver demonstrates a -3-dB electrical bandwidth of 37 GHz with a transimpedance gain of 32 dB/spl middot//spl Omega/. This is, to our knowledge, the first ECPD/HBT ever reported for a monolithically integrated OEIC.     

Design, modeling, and characterization of monolithically integratedInP-based (1.55 μm) high-speed (24 Gb/s) p-i-n/HBT front-endphotoreceivers

High-speed, long-wavelength InAlAs/InGaAs OEIC photoreceivers based on a p-i-n/HBT shared layer integration scheme have been designed, fabricated and characterized. The p-i-n photodiodes, formed with the 6000 Å-thick InGaAs precollector layer of the HBT as the absorbing layer, exhibited a responsivity of ~0.4 A/W and a -3 dB optical bandwidth larger than 20 GHz at λ=1.55 μm. The fabricated three-stage transimpedance amplifier with a feedback resistor of 550 Ω demonstrated a transimpedance gain of 46 dBΩ and a -3 dB bandwidth of 20 GHz. The monolithically integrated photoreceiver with a 83 μm p-i-n photodiode consumed a small dc power of 35 mW and demonstrated a measured -3 dB optical bandwidth of 19.5 GHz, which is the highest reported to date for an InAlAs/InGaAs integrated front-end photoreceiver. The OEIC photoreceiver also has a measured input optical dynamic range of 20 dB. The performance of individual devices and integrated circuits was also investigated through detailed CAD-based analysis and characterization. Transient simulations, based on a HSPICE circuit model and previous measurements of eye diagrams for a NRZ 2³¹-1 pseudorandom binary sequence (PRBS), show that the OEIC photoreceiver is capable of operation up to 24 Gb/s     

A 3 GHz transimpedance OEIC receiver for 1.3-1.55 μm fiber-opticsystems

A high-performance metal-semiconductor-metal high-electron-mobility transistor (MSM-HEMT) transimpedance photoreceiver fabricated using OMCVD-grown InAlAs/InGaAs heterostructures on an InP substrate is discussed. This is the first demonstration of a monolithically integrated receiver amplifier that incorporates a cascode amplifier stage and a Schottky diode level-shifting stage implemented on InP-based optoelectronic integrated circuit (OEIC) photoreceivers. The transimpedance amplifier has an open-loop gain of 5.7 and a bandwidth of 3.0 GHz, which represent the highest gain and the highest speed performance reported for 1.3-1.55-μm-wavelength OEIC receivers     

7.1 GHz bandwidth monolithically integratedIn0.53Ga0.47As/In0.52Al0.48As PIN-HBT transimpedance photoreceiver

A monolithically integrated photoreceiver using an InAlAs/InGaAs HBT-based transimpedance amplifier has been fabricated and characterized. The p-i-n photodiode is implemented using the base-collector junction of the HBT. The 5 μm×5 μm emitter area transistors have self-aligned base metal and non-alloyed Ti/Pt/Au contacts. Discrete transistors demonstrated f_T and f_max of 54 GHz and 51 GHz, respectively. The amplifier demonstrated a -3 dB transimpedance bandwidth of 10 GHz and a gain of 40 dBΩ. The integrated photoreceiver with a 10 μm×10 μm p-i-n photodiode showed a -3 dB bandwidth of 7.1 GHz     

Modulator driver and photoreceiver for 20 Gb/s optic-fiber links

Two integrated circuits, a modulator driver and a photoreceiver integrating a metal-semiconductor-metal (MSM) photodetector, a differential transimpedance amplifier and two limiting amplifier stages for high-speed optical-fiber links are presented. The IC's were manufactured in a 0.2 μm gate-length AlGaAs-GaAs high-electron mobility transistor (HEMT) technology with a f_T of 60 GHz. The modulator driver IC operates up to 25 Gb/s with an output voltage swing of 3.3 V_p-p at each output. The 1.3-1.55 μm wavelength monolithically integrated photoreceiver optoelectronic integrated circuit (OEIC) has a bandwidth of 17 GHz with a high transimpedance gain of 12 kΩ. Eye diagrams are demonstrated at 20 Gb/s with an output voltage of 1 V_p.p     

27-GHz bandwidth high-speed monolithic integrated optoelectronicphotoreceiver consisting of a waveguide fed photodiode and anInAlAs/InGaAs-HFET traveling wave amplifier

A monolithic integrated photoreceiver for 1.55-μm wavelength has been designed for operation in a 20-Gb/s synchronous digital hierarchy system (SDH/SONET), based on a new integration concept. The optoelectronic integrated circuit (OEIC) receiver combines a waveguide-integrated PIN-photodiode and a traveling wave amplifier in coplanar waveguide layout with four InAlAs/InGaAs/InP-HFETs (0.7-μm gate length). The receiver demonstrates a bandwidth of 27 GHz with a low frequency transimpedance of 40 dBΩ. This is, to our knowledge, the highest bandwidth ever reported for a monolithic integrated photoreceiver on InP. Furthermore, a receiver sensitivity of -12 dBm in the fiber (20 Gb/s, BER=10^-9) and an overall optical input dynamic range of 27 dB is achieved. Optical time domain multiplex (TDM) system experiments of the receiver packaged in a module show an excellently shaped eye pattern for 20 Gb/s and an overall sensitivity of -30.5 dBm (BER=10^-9) [including erbium doped fiber amplifiers (EDFA)]     

High-sensitivity BiCMOS OEIC for optical storage systems

A new BiCMOS optoelectronic integrated circuit (OEIC) for applications in advanced optical storage systems is presented. It is optimized with respect to high sensitivity and high speed. The photodiode and the amplifier are monolithically integrated on the same substrate in a commercial 0.8-/spl mu/m BiCMOS process. Analytical expressions for the compensation capacitors and for the bandwidth of the OEIC are derived. Neglecting antireflection coating, no process modifications are necessary to produce the integrated photodiodes. A new offset compensation scheme is implemented in the amplifiers to allow for a small chip area and low power consumption. The OEIC shows a sensitivity of 43.3 mV//spl mu/W in combination with a -3-dB bandwidth of 60.2 MHz.     

Monolithically integrated long wavelength photoreceiver OEIC based on InP/InGaAs HBT technology

The epitaxial structure and growth, circuit design, fabrication process and characterization are described for the photoreceiver opto-electronic integrated circuit (OEIC) based on the InP/lnGaAs HBT/PIN photodetector integration scheme. A 1.55 μm wavelength monolithically integrated photoreceiver OEIC is demonstrated with self-aligned InP/lnGaAs heterojunction bipolar transistor (HBT) process. The InP/lnGaAs HBT with a 2 μm × 8 μm emitter showed a DC gain of 40, a DC gain cutoff frequency of 45 GHz and a maximum frequency of oscillation of 54 GHz. The integrated InGaAs photodetector exhibited a responsivity of 0.45 AAV at λ = 1.55 μm, a dark current less than 10 nA at a bias of -5 V and a -3 dB bandwidth of 10.6 GHz. Clear and opening eye diagrams were obtained for an NRZ 223-l pseudorandom code at both 2.5 and 3.0 Gbit/s. The sensitivity for a bit error ratio of 10-9 at 2.5 Gbit/s is less than -15.2 dBm.     

A monolithic 5 Gb/s p-i-n/HBT integrated photoreceiver circuit realized from chemical beam epitaxial material

The authors report on a high performance monolithic photoreceiver fabricated from chemical beam epitaxy (CBE) grown InP/InGaAs heterostructures, incorporating a p-i-n photodetector followed by a transimpedance preamplifier circuit configured from heterojunction bipolar transistors (HBTs). The optoelectronic integrated circuit (OEIC) was fabricated on a semi-insulating Fe-doped InP substrate. Microwave on-wafer measurements of the frequency response of the transistors yielded unity current gain cutoff frequencies of 32 GHz and maximum oscillation frequencies of 28 GHz for collector currents between 2 and 5 mA. The photoreceiver was operated up to 5 Gb/s, at which bit rate a sensitivity of -18.8 dBm was measured at a wavelength of 1.5 mu m. The results demonstrate that the CBE growth technique is suitable for high performance HBT-based OEICs.<>     

Monolithically integrated multichannel SiGe/Si p-i-n-HBTphotoreceiver arrays

A low-power, short-wavelength eight-channel monolithically integrated photoreceiver array, based on SiGe/Si heterojunction bipolar transistors, is demonstrated. The photoreceiver consists of a photodiode, three-stage transimpedance amplifier, and passive elements for feedback, biasing and impedance matching. The photodiode and transistors are grown by molecular beam epitaxy in a single step. The p-i-n photodiode exhibits a responsivity of 0.3A/W and a bandwidth of 0.8 GHz at λ=0.88 μm. The three-stage transimpedance amplifier demonstrates a transimpedance gain of 43 dBΩ and a -3 dB bandwidth of 5.5 GHz. A single channel monolithically integrated photoreceiver consumes a power of 6 mW and demonstrates an optical bandwidth of 0.8 GHz. Eight-channel photoreceiver arrays are designed for massively parallel applications where low power dissipation and low crosstalk are required. The array is on a 250-μm pitch and can be easily scaled to much higher density. Large signal operation up to 1 Gb/s is achieved with crosstalk less than -26 dB. A scheme for time-to-space division multiplexing is proposed and demonstrated with the photoreceiver array     

8-element linear array monolithic p-i-n MODFET photoreceivers usingmolecular beam epitaxial regrowth

An 8-element linear array of single-stage integrating front-end photoreceivers using molecular beam epitaxial (MBE) regrowth was investigated. Each element consisted of a p-i-n In_0.53Ga_0.47As photodiode integrated with a selectively regrown pseudomorphic In_0.65Ga_0.35As/In_0.52Al_0.48 As MODFET. Cutoff frequencies of 1.0-μm discrete regrown MODFETs were f_t=24 GHz and f_max=50 GHz. Transconductance of the regrown MODFETs was as high as 495 mS/mm with a current density (I_ds) of 250 mA/mm. The 3-dB bandwidth of the photoreceiver was measured to be 1 GHz. The bit rate sensitivity at 1 Gb/s was -31.8 dBm for BER 10^-9 using 1.55 μm excitation for a photoreceiver with an anti-reflection coating. The single-stage amplifier exhibited up to 25 dB flatband gain of the photocurrent, and a two-stage amplifier was up to 31 dB of gain. Good uniformity between each photoreceiver element in the array was achieved. Electrical crosstalk between photoreceiver elements was estimated to be ~-34 dB     

220-GHz metamorphic HEMT amplifier MMICs for high-resolution imaging applications

In this paper, the development of 220-GHz low-noise amplifier (LNA) MMICs for use in high-resolution active and passive millimeter-wave imaging systems is presented. The amplifier circuits have been realized using a well-proven 0.1-/spl mu/m gate length and an advanced 0.05-/spl mu/m gate length InAlAs/InGaAs based depletion-type metamorphic high electron mobility transistor technology. Furthermore, coplanar circuit topology in combination with cascode transistors was applied, leading to a compact chip size and an excellent gain performance at high millimeter-wave frequencies. A realized single-stage 0.05-/spl mu/m cascode LNA exhibited a small-signal gain of 10 dB at 222 GHz, while a 0.1-/spl mu/m four-stage amplifier circuit achieved a linear gain of 20 dB at the frequency of operation and more than 10 dB over the bandwidth from 180 to 225 GHz.     

Lossless InAsP-InGaP modulator at 1.3 /spl mu/m for optical conversion of radio signals up to 40 GHz

We report on an InAsP-InGaP electroabsorption modulator at 1.3 /spl mu/m integrated with a semiconductor amplifier. The fiber-to-fiber insertion gain reaches +10 dB. The 50-/spl mu/m-long modulator section exhibits a bandwidth of 36 GHz and a -17-dB extinction ratio with 3-V drive voltage. The integrated amplifier produced an RF-link efficiency of -26 dB at 20 GHz without any external amplification.     

A W-band InAs/AlSb low-noise/low-power amplifier

The first W-band antimonide based compound semiconductor low-noise amplifier has been demonstrated. The compact 1.4-mm/sup 2/ three-stage co-planar waveguide amplifier with 0.1-/spl mu/m InAs/AlSb high electron mobility transistor devices is fabricated on a 100-/spl mu/m GaAs substrate. Minimum noise-figure of 5.4dB with an associated gain of 11.1 dB is demonstrated at a total chip dissipation of 1.8 mW at 94 GHz. Biased for higher gain, 16/spl plusmn/1 dB is measured over a 77-103 GHz frequency band.     

Ultralow leakage In/sub 0.53/Ga/sub 0.47/As p-i-n photodetector grown on linearly graded metamorphic In/sub x/Ga/sub 1-x/P buffered GaAs substrate

A novel top-illuminated In/sub 0.53/Ga/sub 0.47/As p-i-n photodiodes (MM-PINPD) grown on GaAs substrate by using linearly graded metamorphic In/sub x/Ga/sub 1-x/P (x graded from 0.49 to 1) buffer layer is reported. The dark current, optical responsivities, noise equivalent power, and operational bandwidth of the MM-PINPD with aperture diameter of 60 /spl mu/m are 13 pA, 0.6 A/W, 3.4/spl times/10/sup -15/ W/Hz/sup 1/2/, and 7.5 GHz, respectively, at 1550 nm. The performances of the MM-PINPD on GaAs are demonstrated to be comparable to those of a similar device made on InGaAs-InP substrate.     

An InP/InGaAs p-i-n/HBT monolithic transimpedance photoreceiver

A monolithically integrated 1-Gb/s p-i-n/HBT transimpedance photoreceiver is discussed. The optoelectronic integrated circuit (OEIC) was made from metalorganic vapor-phase epitaxy (MOVPE)-grown InP/InGaAs heterostructures and had a transimpedance of 1375 Ω, a sensitivity of -26.1 dBm, >25-dB dynamic range, and a 500-MHz bandwidth     

Microwave CMOS traveling wave amplifiers: performance and temperature effects

A monolithically integrated five-stage traveling wave amplifier (TWA) with a single n-MOSFET in each gain cell was designed, fabricated and tested in low-cost, standard 0.18 /spl mu/m CMOS technology. Coplanar waveguides (CPW) replace the large area spiral inductors or coplanar strip-lines. A gain of 10 dB at 1 GHz and a unity-gain bandwidth of 12 GHz was measured for the TWA at a gate bias of V/sub GS/=1.2 V and a drain bias of V/sub DS/=1.8 V. The effects of temperature on its gain, phase and stability have been investigated, and are reported for the first time for a CMOS TWA.     

Microwave CMOS traveling wave amplifiers: performance and temperature effects

A monolithically integrated five-stage traveling wave amplifier (TWA) with a single n-MOSFET in each gain cell was designed, fabricated and tested in low-cost, standard 0.18 /spl mu/m CMOS technology. Coplanar waveguides (CPW) replace the large area spiral inductors or coplanar strip-lines. A gain of 10 dB at 1 GHz and a unity-gain bandwidth of 12 GHz was measured for the TWA at a gate bias of V/sub GS/=1.2 V and a drain bias of V/sub DS/=1.8 V. The effects of temperature on its gain, phase and stability have been investigated, and are reported for the first time for a CMOS TWA.     

An ultra-low power InAs/AlSb HEMT Ka-band low-noise amplifier

The first antimonide-based compound semiconductor (ABCS) MMIC, a Ka-Band low-noise amplifier using 0.25-/spl mu/m gate length InAs/AlSb metamorphic HEMTs, has been fabricated and characterized on a 75 /spl mu/m GaAs substrate. The compact 1.1 mm/sup 2/ three-stage Ka-band LNA demonstrated an average of 2.1 dB noise-figure between 34-36 GHz with an associated gain of 22 dB. The measured dc power dissipation of the ABCS LNA was an ultra-low 1.5 mW per stage, or 4.5 mW total. This is less than one-tenth the dc power dissipation of a typical equivalent InGaAs/AlGaAs/GaAs HEMT LNA. Operation with degraded gain and noise figure at 1.1 mW total dc power dissipation is also verified. These results demonstrate the outstanding potential of ABCS HEMT technology for mobile and space-based millimeter-wave applications.     

On the performance analysis and design of an integrated front-end PIN/HBT photoreceiver

A detailed study on the performance analysis and optimum design of an integrated front-end PIN/HBT photoreceiver for fiber-optic communication is presented. Receiver circuits with two different transimpedance amplifiers-a single-stage common emitter (CE) amplifier and a three-stage amplifier comprising a CE amplifier and two emitter followers (EFs), are analyzed assuming a standard load of 50 /spl Omega/. A technique to include the transit-time effect of a PIN photodetector on the overall receiver circuit analysis is introduced and discussed. Gain-bandwidth product (GB) and gain-bandwidth-sensitivity measure product (GBS) are obtained as functions of feedback resistance (R/sub F/) and various device parameters. Hence, some optimum designs are suggested using a photodetector of area 100 /spl mu/m/sup 2/ and with a feedback resistance of 500 /spl Omega/. The bandwidth plays a major role in determining the optimum designs for maximum GB and maximum GBS. A bandwidth >8 GHz has been obtained for the photoreceiver even with a single-stage CE amplifier. The optimum design for a receiver with a three-stage amplifier shows a bandwidth of 35 GHz which is suitable for receivers operating well beyond 40 Gb/s; however, in this case, the gain is reduced. The performance of different fixed square-emitter structures are investigated to choose the optimum designs corresponding to different gains. Very low power dissipation has been estimated for the optimized devices. The noise performance of the devices with optimum designs was calculated in terms of the minimum detectable optical power for a fixed bit-error rate of 10/sup -9/. The present design indicates that GB and noise performance can be improved by using an optimum device design.