PE/clay nanocomposites produced via in situ polymerization by highly active clay-supported Ziegler–Natta catalyst

The synthesis of polyethylene/clay (PE/clay) nanocomposites by means of in situ polymerization was achieved using the clay/BOM/chloroform/EtOH/TiCl₄/TEA catalyst system where butyl octyl magnesium (BOM) and triethyl aluminum (TEA) were a modifier for the clay and cocatalyst, respectively. It was found that the catalyst had high activity in ethylene polymerization. The microstructure of the resulting PE/clay nanocomposites was characterized by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. The examinations evidenced the nanocomposite formation with exfoliated clay in the PE matrix. The thermal properties of the produced nanocomposites were studied by differential scanning calorimetry, oxidation induction time, and thermal gravimetric analysis. Furthermore, the mechanical properties of the nanocomposites were evaluated by the impact and tensile tests. The examinations indicated the improved thermal stability and mechanical properties. Meanwhile, a wide range of molecular weights were produced in the presence of hydrogen.     

New clay‐supported Ziegler–Natta catalyst for preparation of PE/Clay nanocomposites via in situ polymerization

Polyethylene/clay (PE/Clay) nanocomposites were prepared by the in situ polymerization of ethylene using the new Clay/butyl octyl magnesium (BOM)/Chloroform/EtOH/TiCl₄/tri ethyl aluminum (TEA) catalyst system in heptane where BOM and TEA were the support for the clay modification and cocatalyst, respectively. The influence of the modified clay using BOM on the catalyst and polymerization was investigated. Also, the effect of temperature, pressure, hydrogen, and the molar ratios of TEA/Ti on the catalyst yield and ethylene consumption (polymerization rate) were studied. It was found that the above clay‐supported catalyst was an efficient Ziegler–Natta type catalyst due to its suitable yield for the polymerization of ethylene toward the production of the PE/Clay nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

In‐situ synthesis of poly(ethylene terephthalate)/clay nanocomposites using TiO2/SiO2 sol‐intercalated montmorillonite as polycondensation catalyst

A novel organic montmorillonite, which could act as both polycondensation catalyst of poly(ethylene terephthalate) (PET) and filler of PET/clay nanocomposites, was prepared. Original montmorillonite was first treated with different amounts of poly(vinylpyrrolidone) (PVP), and then intercalated by TiO₂/SiO₂ sol to gain polycondensation catalytic activity. The acquired clay possessed excellent thermal stability and would not degrade during the polycondensation step. PET/clay nanocomposites were prepared via in‐situ polymerization using the organo‐clay as polycondensation catalysts. The morphologies of the nanocomposites were characterized by X‐ray diffraction and transmission electron microscope. The results indicated that the amount of PVP and TiO₂/SiO₂ sol strongly affected the dispersion state of the clay, and finally, partially exfoliated PET/clay nanocomposites were obtained. The nanocomposites had better properties than pure PET due to the incorporation of the delaminated clay layers. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Structure and properties of multi‐walled carbon nanotubes/polyethylene nanocomposites synthesized by in situ polymerization with supported Cp2ZrCl2 catalyst

Multi‐walled carbon nanotubes (MWCNTs)/polyethylene (PE) nanocomposites were prepared via in situ polymerization with MWCNTs supported Bis‐ (cyclopentadienyl) zirconium dichloride (Cp₂ZrCl₂) catalyst. X‐ray photoelectron spectroscopy (XPS) and field emission scanning electron microscope (FESEM) results implied that Cp₂ZrCl₂ catalyst was immobilized in the surface of the MWCNTs supports via a bridge of methylaluminoxane (MAO). The efficient dispersion of MWCNTs in PE matrix and the strong compressive forces associated with PE on the MWCNTs were demonstrated by means of transmission electron microscope (TEM), FESEM and Raman spectra. With introducing 0.2 wt% MWCNTs, both the tensile strength and elongation of MWCNTs/PE nanocomposite were improved by factors of 1.6 (from 29 to 45 MPa) and 1.5 (from 909% to 1360%) comparing with the pure PE, respectively. Morphology observation of fractured surface revealed that the PE firmly adhered to the nanotubes, which was responsible for the significant improvement of the mechanical properties of nanocomposites. Thermal stabilities of the nanocomposites were significantly improved. In addition, the MWCNTs/PE nanocomposites showed very high ultraviolet (UV) shielding property, which could increase photooxidative stability of the PE. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

A novel polyethylene/palygorskite nanocomposite prepared via in-situ coordinated polymerization

Summary A novel polyethylene/palygorskite nanocomposite with excellent processability was prepared via in-situ coordination polymerization. A mixed catalyst of TiCl₄/MgCl₂/AIR₃ was employed. Firstly the Ziegler-Natta catalyst of TiCl₄/AlR₃ was loaded on the surface of the nanoscale Whiskers of palygorskite to prepare the “macromolecular comb”. Secondly the MgCl₂ catalyst was introduced into the reaction system to prepare the ordinary PE molecular chain. The polyethylene/palygorskite nanocomposites thus obtained possessed excellent mechanical properties. Received: 10 June 2002/Revised version: 20 August 2002/ Accepted: 22 August 2002 Correspondence toZhongjie Du E-mail: m94037 @mail.buct,edu.cn     

In situ polymerization of polyethylene/clay nanocomposites using a novel clay‐supported Ziegler‐Natta catalyst

Polyethylene/clay nanocomposites (PECNC) were synthesized via in situ Ziegler‐Natta catalyst polymerization. Activated catalyst for polymerization of ethylene monomer has been prepared at first by supporting of the cocatalyst on the montmorillonite (MMT) smectite type clay and then active complex for polymerization formed by reaction of TiCl₄ and aluminum oxide compound on the clay. Acid wash treatment has been used for increasing hydroxyl group and porosity of the clay and subsequently activity of the catalyst. The nanostructure of composites was investigated by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Obtained results show that silica layers of the mineral clay in these polyethylene/nanocomposites were exfoliated, intercalated, and uniformly dispersed in the polyethylene matrix even at very high concentration of the clay. Thermogravimetric analysis (TGA) shows good thermal stability of the PECNCs. Differential scanning calorimeter (DSC) results reveal considerable decrease in the crystalline phase of the PECNC samples. Results of permeability analysis show an increase in barrier properties of PECNC films. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

Preparation of multifunctional supported metallocene catalyst using organic multifunctional modifier for synthesizing polyethylene/clay nanocomposites via in situ intercalative polymerization

A new type of multifunctional ammonium modifier with carbonyl group and vinyl group was synthesized to prepare multifunctional montmorillonites (F-MMTs), which were used as multifunctional catalyst supports for in situ ethylene polymerization. High loading of metallocene catalyst in the galleries of F-MMT had been achieved due to the presence of carbonyl group in the multifunctional modifier. XRD profiles and TEM images showed that polyethylene/montmorillonite (PE/F-MMT) nanocomposites with exfoliated structure could be synthesized using the intercalated catalyst described above, even when the content of MMT was very high (more than 15.1 wt%). The as-produced PE/F-MMTs nanocomposites were composed of flower-like particles with a diameter of about 5 μm. A thermal stable monoclinic phase was observed in PE/F-MMT nanocomposites. Comparatively, the resultant PE/F-MMT nanocomposites showed low gas permeability. Interfacial interaction between PE matrix and F-MMT was enhanced due to the chemical linking between the two components via copolymerization of ethylene with vinyl group of F-MMT. Thus the resultant PE/F-MMT nanocomposites showed good structural stability.     

Influence of polymerization conditions on the structure and properties of polyethylene/polypropylene in‐reactor alloy synthesized in the gas phase with a spherical Ziegler–Natta catalyst

A spherical TiCl₄/MgCl₂‐based catalyst was used in the synthesis of in‐reactor polyethylene/polypropylene alloys by polyethylene homopolymerization and subsequent homopolymerization of propylene in the gas phase. Different conditions in the ethylene homopolymerization stage, such as monomer pressure and polymerization temperature, were investigated, and their influences on the structure and properties of in‐reactor alloys were studied. Raising the polymerization temperature is the most effective way of speeding up polymerization and regulating the ethylene content of polyethylene (PE)/polypropylene (PP) alloys, but it will cause a greater increase in the PE‐b‐PP block copolymer fraction (named fraction D) than in the fraction of PP‐block‐PE in which the PP segments have low or medium isotacticity (named fraction A). Although changing ethylene monomer pressure could influence the ethylene content of PE/PP alloys slightly, it is an effective way of regulating the structural distribution. Reducing the monomer pressure will evidently increase fractions A and D. The mechanical properties of the alloys, including impact strength and flexural modulus, can be regulated in a broad range with changes in polymerization conditions. These properties are highly dependent on the amount, distribution, and chain structure of fractions A and D. The impact strength is affected by both fraction A and fraction D in a complicated way, whereas the flexural modulus is mainly determined by the amount of fraction A. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2136–2143, 2006     

Poly(ethylene terephthalate) nanocomposites by in situ interlayer polymerization: the thermo-mechanical properties and morphology of the hybrid fibers

Nanocomposites of poly(ethylene terephthalate) (PET) with C₁₂PPh-MMT as an organoclay were synthesized by using the in situ interlayer polymerization approach. The PET nanocomposites were melt-spun at different organoclay contents and different draw ratios to produce monofilaments. The thermo-mechanical properties and the morphologies of the PET nanocomposites were examined by using a differential scanning calorimeter, a thermogravimetric analyzer, a wide angle X-ray diffactometer, scanning and transmission electron microscopes, and a universal tensile machine. Some of the clay particles were well dispersed in the PET matrix, and some of them were agglomerated at a size level of greater than approximately 10 nm. The thermal stability and the tensile mechanical properties of the PET hybrid fibers increased with increasing clay content at a DR=1. However, the values of the ultimate tensile strength and the initial modulus of the hybrid fibers decreased markedly with increasing DR from 1 to 16.     

Preparation of exfoliated isotactic polypropylene/alkyl-triphenylphosphonium-modified montmorillonite nanocomposites via in situ intercalative polymerization

Alkyltriphenylphosphonium-modified montmorillonite(PMMT) was used to prepare TiCl₄/MgCl₂/PMMT compound catalyst and exfoliated i-PP/PMMT nanocomposites were prepared by in situ intercalative polymerization of propylene with TiCl₄/MgCl₂/PMMT catalyst. The catalytic efficiency of the above catalyst under optimum polymerization condition could reach as high as 1300 kg/(molTi h) and the combining of PMMT with Z-N catalyst do not change the stereo-regulation catalytic properties of the Z-N catalyst. The synthesized PP possessed high isotacticity, melting point and molecular weight. Wide angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) examinations evidenced the nanocomposites obtained were exfoliated ones.     

Preparation and properties of polyethylene/montmorillonite nanocomposites by in situ polymerization

Polyethylene (PE)/montmorillonite (MMT) nanocomposites were prepared by in situ coordination polymerization using a MMT/MgCl₂/TiCl₄ catalyst activated by Al(Et)₃. The catalyst was prepared by first diffusing MgCl₂ into the swollen MMT layers, followed by loading TiCl₄ on the inner/outer layer surfaces of MMT where MgCl₂ was already deposited. The intercalation of MMT layers by MgCl₂ and TiCl₄ was demonstrated by the enlarged interlayer spacing determined by WAXD. The nanoscale dispersion of MMT layers in the polyethylene matrix was characterized by WAXD and TEM. As a consequence, the crystallinity of the nanocomposite decreased sharply, whereas the tensile strength was significantly improved compared to that of virgin polyethylene of comparable molecular weight. The confinement of the nanodispersed MMT layers to molecular chain and the strong interaction between the nanoscale MMT layers and the resin matrix were thought to account for the decrease of crystallinity and the remarkable enhancement of strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3680–3684, 2003     

Synthesis,structure, and thermal properties of new polypropylene nanocomposites prepared by using MgCl2‐mica/TiCl4 based catalyst

Preparation of polypropylene/mica nanocomposites via in situ polymerization is investigated. The nanocomposites were successfully synthesized using a Ziegler‐Natta catalyst based on MgCl₂/modified mica/TiCl₄. Muscovite mica was organically modified with quaternary ammonium salt, and with triethylaluminum. The treatment with triethylaluminum increased the disorder in the stacking of clay layers, producing a more active catalyst for propylene polymerization, although the mica containing catalysts had lower activity than the standard one prepared without clay. The nanostructure of the composites was characterized by X‐ray diffraction. The results showed that part of the mica layers were exfoliated in the polymer matrix, although tactoids were still present. Small‐angle X‐ray scattering analysis was used to determine how mica and its concentration influence the size of the polymer nanocrystals. Differential scanning calorimetry was used to investigate both melting and crystallization temperatures, as well as the crystallinity of the nanocomposite samples. Thermogravimetric analysis showed that polypropylene/mica nanocomposites presented much higher thermal stability than the polypropylene without mica, which means that mica had a barrier effect against heat. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45587.     

Nanocomposite fibers of poly(ethylene terephthalate) with montmorillonite and mica: thermomechanical properties and morphology

The thermal stabilities, mechanical properties, and morphologies of nanocomposites of poly(ethylene terephthalate) (PET) with two different organoclays are compared. Dodecyltriphenylphosphonium‐montmorillonite (C₁₂PPh‐MMT) and dodecyltriphenylphosphonium‐mica (C₁₂PPh‐Mica) were used as reinforcing fillers in the fabrication of PET hybrid fibers. The variations of their properties with organoclay content in the polymer matrix and draw ratio (DR) are discussed. Transmission electron microscopy micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nanoscale, although some clay particles are agglomerated. It was also found that the addition of only a small amount of organoclay is enough to improve the thermal stabilities and mechanical properties of the PET hybrid fibers. Even polymers with low organoclay contents (1–5 wt%) were found to exhibit much higher strength and modulus values than pure PET. In the case of C₁₂PPh‐MMT/PET, the values of the tensile mechanical properties of the hybrid fibers were found to decrease linearly with increases in DR from 1 to 16. However, the tensile mechanical properties of the C₁₂PPh‐Mica hybrid fibers were found to be independent of DR. Copyright © 2006 Society of Chemical Industry     

Preparation and characterization of polystyrene–clay nanocomposites by free‐radical polymerization

The polymerizable cationic surfactant, vinylbenzyldimethylethanolammouium chloride (VBDEAC), was synthesized to functionalize montmorillonite (MMT) clay and used to prepare exfoliated polystyrene–clay nanocomposites. The organophilic MMT was prepared by Na⁺ exchanged montmorillonite and ammonium cations of the VBDEAC in an aqueous medium. Polystyrene–clay nanocomposites were prepared by free‐radical polymerization of the styrene containing intercalated organophilic MMT. Dispersion of the intercalated montmorillonite in the polystyrene matrix determined by X‐ray diffraction reveals that the basal spacing is higher than 17.6 nm. These nanocomposites were characterized by differential scanning calorimetry (DSC), transmission electron micrograph (TEM), thermal gravimetric analysis (TGA), and mechanical properties. The exfoliated nanocomposites have higher thermal stability and better mechanical properties than the pure polystyrene. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1370–1377, 2002     

Influence of organic modification on mechanical properties of melt processed intercalated poly(methyl methacrylate)–organoclay nanocomposites

The influence of organic modifiers on intercalation extent, structure, thermal and mechanical properties of poly(methyl methacrylate) (PMMA)–clay nanocomposites were studied. Two different organic modifiers with varying hydrophobicity (single tallow versus ditallow) were investigated. The nanocomposites were prepared from melt processing method and characterized using wide angle X‐ray diffraction, transmission electron microscopy, thermogravimetric analysis, differential scanning calorimetry (DSC), and tensile tests. Mechanical properties such as tensile modulus (E), break stress (σ_brk), and % break strain (ε_brk) were determined for nanocomposites at various clay loadings. Extent of PMMA intercalation is sufficient and in the range 9–15 Å depending on organoclay and filler loading. Overall thermal stability of nanocomposites increases by 16–30°C. The enhancement in T_g of nanocomposite is merely by 2–4°C. With increase in clay loading, tensile modulus increases linearly while % break strain decreases. Break stress is found to increase till 4 wt % and further decreases at higher clay loadings. The overall improvement in thermal and mechanical properties was higher for the organoclay containing organic modifier with lower hydrophobicity and single tallow amine chemical structure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and properties of montmorillonite‐based polyimide nanocomposites

Montmorillonite (MMT)‐based polyimide (PI) nanocomposites were prepared via two‐stage polymerization of PI using polyamic acid (PAA). The clay was organically modified using various alkylammonium ions to examine the effect of changes in alkyl length on the intercalation spacing of both the treated clays and their hybrids with PAA and PI. The intercalation behavior of clay in the PI matrix and its thermal and mechanical properties were investigated as a function of clay concentration. The d‐spacing of organically modified MMT (O‐MMT) increased with increasing length of the alkylammonium chain. PI/O‐MMT hybrids form exfoliated nanocomposites at clay concentrations below 2 wt%, while they form intercalated nanocomposites together with some exfoliated ones at clay contents exceeding 4 wt%. Young's modulus increased rapidly to a clay loading of 2 wt%, and leveled off with further increases in clay loading. The tensile strength at break increased rapidly up to a clay loading of 1 wt%, and then decreased sharply, while the strain at break showed a monotonic decrease with increasing clay loading from 0 to 8 wt%. The storage modulus, E′, in the temperature range below the glass transition temperature T_g, generally increased with increasing clay content, except at the highest clay content of 8 wt%. Copyright © 2004 Society of Chemical Industry     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.     

Synthesis of polypropylene/clay nanocomposites using bisupported Ziegler‐Natta catalyst

In this article, preparation of polypropylene/clay nanocomposites (PPCNC) via in situ polymerization is investigated. MgCl₂/montmorillonite bisupported Ziegler‐Natta catalyst was used to prepare PPCNC samples. Montmorillonite (MMT) was used as an inert support and reinforcement agent. The nanostructure of the composites was characterized by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. Obtained results showed that silica layers of the MMT in these PPCNC were intercalated, partially exfoliated, and uniformly dispersed in the polypropylene matrix. Thermogravimetric analysis showed good thermal stability for the prepared PPCNC. Differential scanning calorimetric was used to investigate both melting and crystallization temperatures, as well as the crystallinity of the PPCNC samples. Results of permeability analysis showed significant increase in barrier properties of PPCNC films. Effective parameters on molecular weight and flow ability of produced samples such as Al/Ti molar ratio and H₂ concentration were also investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polystyrene–organoclay nanocomposites prepared by melt intercalation,in situ,and masterbatch methods

In this study, polystyrene (PS)/montmorillonite nanocomposites were prepared by melt intercalation, in situ polymerization, and masterbatch methods. In the masterbatch method, as the first step, a high clay content composite of PS–organoclay (masterbatch) was prepared by in situ polymerization, and then the prepared masterbatch was diluted to desired compositions with commercial PS in a twin‐screw extruder. The structure and mechanical properties of the nanocomposites were examined. X‐ray diffraction (XRD) analysis showed that the d‐spacing of the in situ formed nanocomposites increased from 32.9 Å for the organoclay powder to 36.3 and 36.8 Å respectively in nanocomposites containing 0.73 and 1.6 wt% organoclay, indicating intercalation. However, the d‐spacing of the other prepared materials remained nearly unchanged when compared with pure organoclay powder. Thus, at these low clay contents, in situ formed nanocomposites showed the best improvement in mechanical properties including tensile, impact strength, and Young's modulus. In situ polymerization method did not prove to be efficient at high clay loadings in terms of intercalation and mechanical properties. At high clay loadings, the effects of the three methods in promoting mechanical properties were not significantly different from each other. POLYM. COMPOS., 27:249–255, 2006. © 2006 Society of Plastics Engineers     

TiCl4 immobilized on a composite support SiO2/MgCl2·x(1,4-butanediol)/poly[styrene-co-(acrylic acid)] for ethylene polymerization: The barrier effect of poly[styrene-co-(acrylic acid)]

By immobilizing titanium-based Ziegler–Natta catalyst on composite support, SiO₂/MgCl₂·x(1,4-butanediol)/poly[styrene-co-(acrylic acid)] (SiO₂/MgCl₂·xBD/PSA) and SiO₂/MgCl₂·xBD/PSA/TiCl₄ (SMPT) were synthesized for ethylene polymerization. SiO₂/MgCl₂·xBD/TiCl₄ without PSA was also prepared for comparison. The results of energy-dispersive X-ray analysis, SEM, and thermogravimetric analysis demonstrated that SMPT had a unique core-mantle-shell structure. The PSA layer can be considered as a barrier for the mass-transfer of reactants based on the results of self-diffusion measurement by pulsed field gradient NMR and ethylene polymerization. The polyethylene produced by SMPT showed high molecular weight (MW) and broad molecular weight distribution (MWD). The influences of PSA content, hydrogen, and comonomer on the ethylene polymerization behavior were also investigated. The results further demonstrated that the PSA layer in the composite support had different diffusion capabilities to the reactants. The physical properties of the produced polyethylene implied the possibility to control the MW and MWD of polyethylene by the manipulation of PSA layer. The catalyst fragmentation during ethylene polymerization was also affected by the PSA shell due to its barrier effect. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012