共查询到20条相似文献,搜索用时 906 毫秒
1.
2.
3.
一种含LLM-105的HMX基低感高能PBX炸药 总被引:4,自引:0,他引:4
研究了不同颗粒形态的LLM-105对HMX的降感作用以及HMX/LLM-105基炸药配方用的黏结体系和钝感体系.设计出一种HMX/LLM-105配方,采用机械感度和冲击波感度以及板痕试验和圆筒试验对其安全性能和爆轰性能进行了测试.结果表明,LLM-105可作为含能钝感剂用于HMX基PBX炸药,该种含LLM-105的HMX基PBX爆速约8700 m/s、爆压34 GPa以上、比动能为1.560 kJ/g,冲击波感度比JOB-9003炸药低10%,是一种新型的低感高能炸药. 相似文献
4.
5.
文中叙述了建立隔板试验的必要性,试验装置及数据处理方法。并列出了八种炸药样品的制备方法、密度、空隙度、爆炸50%几率的隔板厚度和起爆点的延迟距离的试验结果。初步探索了装药密度、试验环境温度对炸药冲击波感度的影响,并进行简单的讨论。 相似文献
6.
低热应力下石蜡对压装RDX基PBX炸药性能的影响 总被引:1,自引:0,他引:1
《火炸药学报》2015,(5)
为了解石蜡在低热应力下对压装含Al粉RDX基PBX炸药性能的影响,用扫描电镜、聚焦显微镜、透射显微镜、X线断层摄影仪观察了药柱在55℃加热57d的的微观结构;测量了药柱的体积、质量和密度,并测试了其真空安定性、摩擦感度、撞击感度、抗压强度、抗剪强度。结果表明,加热后药柱中石蜡软化连接,黏结剂互相粘结;药柱质量减少0.1%,体积增加0.5%,平均密度减少0.6%,未见裂纹;摩擦感度从8%降至0,抗压强度增加30%,抗剪强度增加83%。说明低热应力并未影响药柱的撞击感度、安定性和结构完整性,此时药柱中的石蜡发生软化迁移,分布均匀化,使药柱压制成型时的缺陷得到修复,从而降低了药柱的摩擦感度,并提高了抗压强度和抗剪强度。 相似文献
7.
文中叙述了建立隔板试验的必要性,试验装置及数据处理方法。並列出了八种炸药样品的制备方法、密度、空隙度、爆炸50%几率的隔板厚度和起爆点的延迟距离的试验结果。初步探索了装药密度、试验环境温度对炸药冲击波感度的影响,並进行简单的讨论。 相似文献
8.
为研究不同条件下LX--04(HMX/氟橡胶/85/15)大隔板试验(LSGT)的冲击波感度G。,运用ANSYS/LS.DYNA对整个爆炸冲击波传爆过程进行了数值模拟,观察了LSGT中爆轰冲击波的传播过程,分别讨论了主发炸药PE4、TNT、B炸药产生的爆轰波经过有机玻璃隔板、铝隔板、钢隔板衰减后的冲击波压力变化情况,最终找出了3种不同主发炸药和3种隔板下LX-04冲击波感度G50。同时,定性地分析了3种隔板对爆炸冲击波的衰减系数。其中,铝隔板的衰减系数最大,有机玻璃隔板的衰减系数最小。 相似文献
9.
《火炸药学报》2015,(4)
为了对炸药冲击波感度进行量化评估,根据裕度和不确定度的量化(QMU)评估的通用框架和关键要素,研究了炸药安全性的QMU评估方法。按序贯试验方法设计了炸药的安全性试验,统计分析了炸药的起爆临界阈值、试验方差和响应概率,建立了隔板试验中冲击波作用下炸药安全性的QMU评估模型。通过隔板试验研究了炸药爆炸的临界隔板厚度和其他参数,利用Bruceton升降法试验和大样本量的Monte-Carlo模拟,得到炸药安全性的QMU评估的系列公式,计算了PBX-C炸药冲击波安全性要求的临界阈值Xth、均值μ、方差σ和XP估计的标准差,导出了给定置信水平时爆炸概率P相应点XP估计的不确定度区间,对冲击波作用下PBX-C炸药的安全性进行了初步QMU评估。 相似文献
10.
为了研究黏结剂对CL-20/FOX-7基PBX性能的影响,分别以Estane、EPDM、ACM、EVA为黏结剂,采用水悬浮法制备了含有不同黏结剂成分的CL-20/FOX-7基高聚物黏结炸药(PBX);采用场发射扫描电子显微镜(SEM)、激光粒度分析仪、X射线衍射仪(XRD)、差示扫描量热仪(DSC)对样品结构、形貌和热分解特性进行了表征;使用撞击感度测试仪、摩擦感度测试仪和小型烤燃实验装置测试了不同样品的机械感度和烤燃特性。结果表明,以EVA为黏结剂制备的CL-20/FOX-7基PBX造型粉颗粒密实,表面光滑且没有脱粘外漏现象,包覆粘结效果最好;以EVA为黏结剂制备的PBX活化能较细化CL-20提高了87.75 kJ/mol,较FOX-7原料提高了42.52 kJ/mol,说明使用EVA的PBX热稳定性较原料有一定提升;同时该PBX样品特性落高(H 50)较细化CL-20提高25.6 cm,摩擦感度爆炸概率降低52%,较使用Estane、EPDM和ACM的PBX样品机械感度更低;使用EVA的PBX药柱在升温速率为6K/min的慢速烤燃条件下,烤燃反应等级为燃烧,说明该配方能够达到烤燃安全试验要求,安全性能较好。 相似文献
11.
12.
M. S. J. Simmonds W. M. Blaney F. Delle Monache M. Marquina Mac-Quhae G. B. Marini Bettolo 《Journal of chemical ecology》1985,11(12):1593-1599
Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria. 相似文献
13.
14.
Cheng-Le Zhao Shane Porzio Alan Smith Haiyan Ge H. T. Davis L. E. Scriven 《Journal of Coatings Technology and Research》2006,3(2):109-115
Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively.
There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized.
High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without
the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of
fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to
achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic
SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve
F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender
particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing,
and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing
or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually
preserves suspension stability during freezing.
Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago,
IL. Tied for first place in The John A. Gordon Best Paper Competition. 相似文献
15.
16.
17.
Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US
In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae
and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted
in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures
(release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species
(Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species
to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were
exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of
separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles
from the southeastern region of the US. 相似文献
18.
Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed. 相似文献
19.
中蓝晨光化工研究院有限公司《塑料工业》编辑部 《塑料工业》2009,37(3)
收集了2007年7月~2008年6月世界塑料工业的相关资料,介绍了2007~2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍. 相似文献
20.
中蓝晨光化工研究院《塑料工业》编辑部 《塑料工业》2007,35(3):1-25,67
收集了2005年7月~2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。 相似文献