Surface approximation to scanned data

A method to approximate scanned data points with a B-spline surface is presented. The data are assumed to be organized in the form of Q _i,j, i=0,…,n; j=0,…,m _i, i.e., in a row-wise fashion. The method produces a C ^{(p-1, q-1)} continuous surface (p and q are the required degrees) that does not deviate from the data by more than a user-specified tolerance. The parametrization of the surface is not affected negatively by the distribution of the points in each row, and it can be influenced by a user-supplied knot vector.     

高阶连续的形状可调三角多项式曲线曲面

目的目前使用的B样条曲线曲面存在着高连续阶与高局部调整性两者无法兼而有之的不足,且B样条曲线曲面的形状被控制顶点和节点向量唯一确定,这些因素影响着B样条方法的几何设计效果与方便性。本文旨在克服这种局限,以期构造具有高次B样条方法的高连续阶,低次B样条方法的高局部调整性,以及有理B样条方法权因子决定的形状调整性的曲线曲面。方法在三角函数空间上构造了一组含参数的调配函数,进而定义具有与3次B样条曲线曲面相同结构的新曲线与张量积曲面。结果新曲线曲面继承了B样条方法的凸包性、对称性、几何不变性等诸多性质。不同的是,同样是基于4点分段,3次均匀B样条曲线C2连续,而对于等距节点,在一般情况下,新曲线C5连续,当参数取特殊值时可达C7连续。新曲线在C5连续的情况下存在1个形状参数,能较好地调整曲线的形状同时又无须改变控制顶点。另外,将形状参数设为特定值,新曲线可以自动插值给定点列。新曲面具有与新曲线相应的优点。结论在强局部性下实现高阶连续性的形状可调分段组合曲线曲面,为高阶光滑曲线曲面的设计提供了可能,并且新曲线实现了逼近与插值的统一表示,能较好地应用于工程实际。调配函数的构造方法具有一般性,可用相同方式构造其他具有类似性质的调配函数。     

A class of general quartic spline curves with shape parameters

With a support on four consecutive subintervals, a class of general quartic splines are presented for a non-uniform knot vector. The splines have C² continuity at simple knots and include the cubic non-uniform B-spline as a special case. Based on the given splines, piecewise quartic spline curves with three local shape parameters are given. The given spline curves can be C²∩G³ continuous by fixing some values of the curve?s parameters. Without solving a linear system, the spline curves can also be used to interpolate sets of points with C² continuity. The effects of varying the three shape parameters on the shape of the quartic spline curves are determined and illustrated.     

A Geometric Approach for Multi-Degree Spline

Multi-degree spline (MD-spline for short) is a generalization of B-spline which comprises of polynomial segments of various degrees.The present paper provides a new definition for MD-spline curves in a geometric intuitive way based on an efficient and simple evaluation algorithm.MD-spline curves maintain various desirable properties of B-spline curves,such as convex hull,local support and variation diminishing properties.They can also be refined exactly with knot insertion.The continuity between two adjacent segments with different degrees is at least C1 and that between two adjacent segments of same degrees d is Cd 1.Benefited by the exact refinement algorithm,we also provide several operators for MD-spline curves,such as converting each curve segment into B′ezier form,an efficient merging algorithm and a new curve subdivision scheme which allows different degrees for each segment.     

Smooth multiple B-spline surface fitting with Catmull%ndash;Clark subdivision surfaces for extraordinary corner patches

This paper presents an algorithm for simultaneously fitting smoothly connected multiple surfaces from unorganized measured data. A hybrid mathematical model of B-spline surfaces and Catmull–Clark subdivision surfaces is introduced to represent objects with general quadrilateral topology. The interconnected multiple surfaces are G ² continuous across all surface boundaries except at a finite number of extraordinary corner points where G ¹ continuity is obtained. The algorithm is purely a linear least-squares fitting procedure without any constraint for maintaining the required geometric continuity. In case of general uniform knots for all surfaces, the final fitted multiple surfaces can also be exported as a set of Catmull–Clark subdivision surfaces with global C ² continuity and local C ¹ continuity at extraordinary corner points. Published online: 14 May 2002 Correspondence to: W. Ma     

对可调控Bézier曲线的改进

目的 在用Bézier曲线表示复杂形状时,相邻曲线的控制顶点间必须满足一定的光滑性条件。一般情况下,对光滑度的要求越高,条件越复杂。通过改进文献中的“可调控Bézier曲线”,以构造具有多种优点的自动光滑分段组合曲线。方法 首先给出了两条位置连续的曲线G^l连续的一个充分条件,进而证明了“可调控Bézier曲线”在普通Bézier曲线的G^l光滑拼接条件下可达G^l(l为曲线中的参数)光滑拼接。然后对“可调控Bézier基”进行改进得到了一组新的基函数,利用该基函数按照Bézier曲线的定义方式构造了一种新曲线。分析了该曲线的光滑拼接条件,并根据该条件定义了一种分段组合曲线。结果 对于新曲线而言,只要前一条曲线的最后一条控制边与后一条曲线的第1条控制边重合,两条曲线便自动光滑连接,并且在连接点处的光滑度可以简单地通过改变参数的值来自由调整。由新曲线按照特殊方式构成的分段组合曲线具有类似于B样条曲线的自动光滑性和局部控制性。不同的是,组合曲线的各条曲线段可以由不同数量的控制顶点定义,选择合适的参数,可以使曲线在各个连接点处达到任何期望的光滑度。另外,改变一个控制顶点,至多只会影响两条曲线段的形状,改变一条曲线段中的参数,只会影响当前曲线段的形状,以及至多两个连接点处的光滑度。结论 本文给出了构造易于拼接的曲线的通用方法,极大简化了曲线的拼接条件。此基础上,提出的一种新的分段组合曲线定义方法,无需对控制顶点附加任何条件,所得曲线自动光滑,且其形状、光滑度可以或整体或局部地进行调整。本文方法具有一般性,为复杂曲线的设计创造了条件。     

B-spline surface fitting based on adaptive knot placement using dominant columns

By expanding the idea of B-spline curve fitting using dominant points (Park and Lee 2007 [13]), we propose a new approach to B-spline surface fitting to rectangular grid points, which is based on adaptive knot placement using dominant columns along u- and v-directions. The approach basically takes approximate B-spline surface lofting which performs adaptive multiple B-spline curve fitting along and across rows of the grid points to construct a resulting B-spline surface. In multiple B-spline curve fitting, rows of points are fitted by compatible B-spline curves with a common knot vector whose knots are computed by averaging the parameter values of dominant columns selected from the points. We address how to select dominant columns which play a key role in realizing adaptive knot placement and thereby yielding better surface fitting. Some examples demonstrate the usefulness and quality of the proposed approach.     

Quadratic approximation to plane parametric curves and its application in approximate implicitization

Expressing complex curves with simple parametric curve segments is widely used in computer graphics, CAD and so on. This paper applies rational quadratic B-spline curves to give a global C ¹ continuous approximation to a large class of plane parametric curves including rational parametric curves. Its application in approximate implicitization is also explored. The approximated parametric curve is first divided into intrinsic triangle convex segments which can be efficiently approximated with rational quadratic Bézier curves. With this approximation, we keep the convexity and the cusp (sharp) points of the approximated curve with simple computations. High accuracy approximation is achieved with a small number of quadratic segments. Experimental results are given to demonstrate the operation and efficiency of the algorithm.     

Parametric G n blending of curves and surfaces

We introduce a simple blending method for parametric curves and surfaces that produces families of parametrically defined, G ⁿ –continuous blending curves and surfaces. The method depends essentially on the parameterizations of the curves/surfaces to be blended. Hence, the flexibility of the method relies on the existence of suitable parameter transformations of the given curves/surfaces. The feasibility of the blending method is shown by several examples. The shape of the blend curve/surface can be changed in a predictable way with the aid of two design parameters (thumb weight and balance).     

Interpolating meshes of boundary intersecting curves by subdivision surfaces

C ⁰ (creases) or C ¹ continuity across the interpolated curves.     

Möbius变换下四次有理抛物-PH曲线的C2 Hermite插值

目的 曲线插值问题在机器人设计、机械工业、航天工业等诸多现代工业领域都有广泛的应用，而已知端点数据的Hermite插值是计算机辅助几何设计中一种常用的曲线构造方法，本文讨论了一种偶数次有理等距曲线，即四次抛物-PH曲线的C² Hermite插值问题。方法 基于M bius变换引入参数，利用复分析的方法构造了四次有理抛物-PH曲线的C² Hermite插值，给出了具体插值算法及相应的Bézier曲线表示和控制顶点的表达式。结果 通过给出"合理"的端点插值数据，以数值实例表明了该算法的有效性，所得12条插值曲线中，结合最小绝对旋转数和弹性弯曲能量最小化两种准则给出了判定满足插值条件最优曲线的选择方法，并以具体实例说明了与其他插值方法的对比分析结果。结论 本文构造了M bius变换下的四次有理抛物-PH曲线的C² Hermite插值，在保证曲线次数较低的情况下，达到了连续性更高的插值条件，计算更为简单，插值效果明显，较之传统奇数次PH曲线具有更加自然的几何形状，对偶数次PH曲线的相关研究具有一定意义。     

μ-Bases and singularities of rational planar curves

We provide a technique to detect the singularities of rational planar curves and to compute the correct order of each singularity including the infinitely near singularities without resorting to blow ups. Our approach employs the given parametrization of the curve and uses a μ-basis for the parametrization to construct two planar algebraic curves whose intersection points correspond to the parameters of the singularities including infinitely near singularities with proper multiplicity. This approach extends Abhyankar's method of t-resultants from planar polynomial curves to rational planar curves. We also derive the classical result that for a rational planar curve of degree n the sum of all the singularities with proper multiplicity is (n−1)(n−2)/2. Examples are provided to flesh out our results.     

Neural Network Methods for NURBS Curve and Surface Interpolation

New algorithms based on artificial neural network models are presented for cubic NURBS curve and surface interpolation.When all th knot spans are identical,the NURBS curve interpolation procedure degenerates into that of uniform rational B-spline curves.If all the weights of data points are identical,then the NURBS curve interpolation procedure degenerates into the integral B-spline curve interpolation.     

Generation of Discrete Bicubic G1 B-Spline Ship Hullform Surfaces from a Given Curve Network Using Virtual Iso-Parametric Curves

We propose a method that automatically generates discrete bicubic G1 continuous B-spline surfaces that interpolate the curve network of a ship hullform. First, the curves in the network are classified into two types: boundary curves and "reference curves". The boundary curves correspond to a set of rectangular (or triangular) topological type that can be represented with tensor-product (or degenerate) B-spline surface patches. Next, in the interior of the patches, surface fitting points and cross boundary derivatives are estimated from the reference curves by constructing "virtual" isoparametric curves. Finally, a discrete G1 continuous B-spline surface is generated by a surface fitting algorithm. Several smooth ship hullform surfaces generated from curve networks corresponding to actual ship hullforms demonstrate the quality of the method.     

Generation of Discrete Bicubic G^1 B-Spline Ship Hullform Surfaces from a Given Curve Network Using Virtual Iso-Parametric Curves

We propose a method that automatically generates discrete bicubic G^1 continuous B-spline surfaces that interpolate the curve network of a ship huliform.First,the curves in the network are classified into two types;boundary curves and ＂reference curves＂,The boundary curves correspond to a set of rectangular（or triangular）topological type that can be representes with tensot-product （or degenerate）B-spline surface patches.Next,in the interior of the patches,surface fitting points and cross boundary derivatives are estimated from the reference curves by constructing ＂virtual＂isoparametric curves.Finally,a discrete G^1 continuous B-spline surface is gencrated by a surface fitting algorithm.Several smooth ship hullform surfaces generated from curve networks corresponding to actual ship hullforms demonstrate the quality of the method.     

Lofted B-spline surface interpolation by linearly constrained energy minimization

This paper proposes a new approach for lofted B-spline surface interpolation to serial contours, where the number of points varies from contour to contour. The approach first finds a common knot vector consisting of fewer knots that contain enough degrees of freedom to guarantee the existence of a B-spline curve interpolating each contour. Then, it computes from the contours a set of compatible B-spline curves defined on the knot vector by adopting B-spline curve interpolation based on linearly constrained energy minimization. Finally, it generates a B-spline surface interpolating the curves via B-spline surface lofting. As the energy functional is quadratic, the energy minimization problem leads to that of solving a linear system. The proposed approach is efficient in computation and can realize more efficient data reduction than previous approaches while providing visually pleasing B-spline surfaces. Moreover, the approach works well on measured data with noise. Some experimental results demonstrate its usefulness and quality.     

C2 Local convexity-preserving interpolation through the control point form method

C ² continuous convexity-preserving parametric curves in ℝ² is presented. The control point form method, which was developed in the field of numerical grid generation, is used here to construct interpolating curves. Good control over the shape of the curves is obtained thanks to the capability of the proposed approach to interpolate not only the data points, but also some directions suitably associated with them.     

Global methods for stroke segmentation

Two methods for stroke segmentation from a global point of view are presented and compared. One is based on thinning methods and the other is based on contour curve fitting. For both cases an input image is binarized. For the former, Hilditch's method is used, then crossing points are sought, around which a domain is constructed. Outside the domain, a set of line segments are identified. These lines are connected and approximated by cubic B-spline curves. Smoothly connected lines are selected as segmented curves. This method works well for a limited class of crossing lines, which are shown experimentally. In the latter, a contour line is approximated by cubic B-spline curve, along which curvature is measured. According to the extreme points of the curvature graph, the contour line is segmented, based on which the line segment is obtained. Experimental results are shown for some difficult cases. Received October 31, 1998 / Revised January 12, 1999     

B样条曲线的节点插入问题及两个新算法

Ｂｏｅｈｍ算法和Ｏｓｌｏ算法是Ｂ产条曲线的节点插入的经典算法，它们可以有效地将节眯插入到端点插值（Ｅｎｄｏｐｏｉｎｔ－ｉｎｔｅｒｏｌａｔｉｎｇ）Ｂ样条曲线，但是，对于其它的Ｂ样条曲线而言，当插入靠近节眯矢量两端附近的节点时，所有的经典算法都将出错，本文提出了两个节点插入新算法，它们可以解决节插入的经典算法中的问题，能够将任意节点插入到各种Ｂ样条曲线之中，它们的另一个重要用途是可以用于各种Ｂ样条曲线     

Self-intersection elimination in metamorphosis of two-dimensional curves

H :[0, 1]× ³→ ³, where H(t, r) for t=0 and t=1 are two given planar curves C ₁(r) and C ₂(r). The first t parameter defines the time of fixing the intermediate metamorphosis curve. The locus of H(t, r) coincides with the ruled surface between C ₁(r) and C ₂(r), but each isoparametric curve of H(t, r) is self-intersection free. The second algorithm suits morphing operations of planar curves. First, it constructs the best correspondence of the relative parameterizations of the initial and final curves. Then it eliminates the remaining self-intersections and flips back the domains that self-intersect.