酶响应型捏合淀粉药物载体的制备和性能

采用机械捏合的方法制备了不同抗消化性能的捏合淀粉基载体材料。利用扫描电子显微技术(SEM)、X射线衍射技术(XRD)和体外模拟人体消化试验(In-Vitro)对捏合淀粉的颗粒形貌、结晶结构和在人体上消化道中的消化性能进行了考察。发现随着抗消化性能的降低,淀粉颗粒的破损程度越大,淀粉结晶结构结晶形态由B型向V型转变,消化速度增大。同时以胰酶为模型药物,考察了捏合淀粉对药物的体外释放性能。结果显示,不同抗消化性能的捏合淀粉可望作为不同消化道靶向要求的药物载体材料。     

Polysaccharide matrices for microbially triggered drug delivery to the colon

Matrix tablets were prepared using xanthan gum (XG) and guar gum (GG) in varying proportions, and the suitability of the prepared tablets was evaluated for colon specific drug delivery. Indomethacin was used as a model drug. The ability of the prepared matrices to retard drug release in the upper gastrointestinal tract (GIT) and to undergo enzymatic hydrolysis by the colonic bacteria was evaluated. For this, drug release studies were carried out in the presence of rat cecal content. Further cecal content of rats with induced enzymatic activity were used. To ascertain the role of bacterial flora in carrying out the hydrolysis of the tablet, cecal content of rats treated with antibiotics were used in the dissolution media. Presence of XG in combination with GG in the tablets could retard drug release in the conditions of the upper GIT. However, the presence of GG and starch made these matrices microbially degradable. Guar gum alone as a drug release-retarding excipient in the matrices does not achieve the desired retardation. Presence of XG in the tablets not only retards the initial drug release from the tablets, but due to high swelling, makes them more vulnerable to digestion by the microbial enzymes in the colon.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Studies of Guar Gum Compression-Coated 5-Aminosalicylic Acid Tablets for Colon-Specific Drug Delivery

The aim of this study was to develop colon-specific delivery systems for 5-aminosalicylic acid (5-ASA) using guar gum as a carrier. Core tablets containing 5-ASA were prepared by wet granulation with starch paste and were compression coated with coating formulations containing different quantities of guar gum (300, 200, 150, and 125 mg). In vitro drug release studies were carried out in simulated gastric and intestinal fluids and in pH 6.8 buffer containing rat cecal contents. The application of 175 mg of coating formulation containing 150 mg of guar gum over 5-ASA core tablets resulted in the release of less than 2% drug in simulated gastric and intestinal fluids and about 93% of 5-ASA in pH 6.8 buffer containing rat cecal contents. Differential scanning calorimetric (DSC) studies showed the absence of any interaction between 5-ASA and the excipients on storage at 45°C for 12 weeks. The study confirmed that selective delivery of 5-ASA to the colon can be achieved using guar gum as a carrier in the form of a compression coating over the drug core.     

Studies of guar gum compression-coated 5-aminosalicylic acid tablets for colon-specific drug delivery

The aim of this study was to develop colon-specific delivery systems for 5-aminosalicylic acid (5-ASA) using guar gum as a carrier. Core tablets containing 5-ASA were prepared by wet granulation with starch paste and were compression coated with coating formulations containing different quantities of guar gum (300, 200, 150, and 125 mg). In vitro drug release studies were carried out in simulated gastric and intestinal fluids and in pH 6.8 buffer containing rat cecal contents. The application of 175 mg of coating formulation containing 150 mg of guar gum over 5-ASA core tablets resulted in the release of less than 2% drug in simulated gastric and intestinal fluids and about 93% of 5-ASA in pH 6.8 buffer containing rat cecal contents. Differential scanning calorimetric (DSC) studies showed the absence of any interaction between 5-ASA and the excipients on storage at 45°C for 12 weeks. The study confirmed that selective delivery of 5-ASA to the colon can be achieved using guar gum as a carrier in the form of a compression coating over the drug core.     

Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B12 and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B12 and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

Formulation development and in-vitro/in-vivo correlation for a novel sterculia gum-based oral colon-targeted drug delivery system of azathioprine

The present study was aimed at designing a microflora triggered colon-targeted drug delivery system (MCDDS) based on swellable polysaccharide, sterculia gum in combination with biodegradable polymers with a view to target azathioprine (AZA) in the colon for the treatment of IBD with reduced systemic toxicity. The microflora degradation study of gum was investigated in rat cecal medium. The polysaccharide tablet was coated to different film thicknesses with blends of chitosan/Eudragit RLPO and over coated with Eudragit L00 to provide acid and intestinal resistance. Swelling and drug release studies were carried out in simulated gastric fluid (SGF) (pH 1.2), simulated intestinal fluid (SIF) (pH 6.8) and simulated colonic fluid (SCF) (pH 7.4 under anaerobic environment), respectively. Drug release study in SCF revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudragit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that, the optimized MCDDS was fitted well into first order model and apparent lag time was found to be 6?h, followed by Higuchi spherical matrix release. The degradation of chitosan was the rate-limiting factor for drug release in the colon. In-vivo study in rabbit shows delayed T_max, prolonged absorption time, decreased C_max and absorption rate constant (K_a) indicating reduced systemic toxicity of the drug as compared to other dosage forms.     

Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B₁₂ and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B₁₂ and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

In vitro evaluation of compression-coated glycyl-L-histidyl-L-lysine-Cu(II) (GHK-Cu2+)-loaded microparticles for colonic drug delivery

Glycyl-L-histidyl-L-lysine-Cu(II) (GHK-Cu(2+))-loaded Zn-pectinate microparticles in the form of hydroxypropyl cellulose (HPC) compression-coated tablets were prepared and their in vitro behavior tested. GHK-Cu(2+) delivery to colon can be useful for the inhibition of matrix metalloproteinase, with the increasing secretion of tissue inhibitors of metalloproteinases (TIMPS),which are the major factors contributing in mucosal ulceration and inflammation in inflammatory bowel disease. The concentration of peptide was determined spectrophotometrically. The results obtained implied that surfactant ratio had a significant effect on percent production yield (1.25 to 1.75 w/w; 72.22% to 80.84%), but cross-linking agent concentration had not. The entrapment efficiency (EE) was found to be in the range of 58.25-78.37%. The drug-loading factor significantly increased the EE; however, enhancement of cross-linking agent concentration decreased it. The release of GHK-Cu(2+) from Zn-pectinate microparticles (F1-F8) in simulated intestinal fluid was strongly affected by cross-linking agent concentration and drug amount (50 mg for F1-F6; 250 mg for F7-F8), but not particularly affected by surfactant amount. Release profiles represented that the microparticles released 50-80% their drug load within 4 h. Therefore, the optimum microparticle formulation (F8) coated with a relatively hydrophobic polymer HPC to get a suitable colonic delivery system. The optimum colonic delivery tablets prepared with 700 mg HPC-SL provided the expected delayed release with a lag time of 6 h. The effects of polymer viscosity and coat weight on GHK-Cu(2+) release were found to be crucial for the optimum delay of lag time. The invention was found to be promising for colonic delivery.     

Hydration,Erosion, and Release Behavior of Guar-Based Hydrophilic Matrix Tablets Containing Total Alkaloids of Sophora alopecuroides

It is a challenge to deliver water-soluble drug based on hydrophilic matrix to colon because of swelling and erosion of polysaccharides in contact with media. In our study, guar-based hydrophilic matrix tablets containing water-soluble total alkaloids of Sophora alopecuroides prepared by wet granulation technique were evaluated. A novel method was established to investigate the changes of swelling and volume for guar-based tablets in undynamic state, which generally showed a rapid swelling and volume change in the first 9 h, then the hydrated speed slowed down. On the other hand, the influence of different pH of the media on water uptake and erosion of various guar-based formulations in dynamic state indicated that the hydrated constants in simulated gastric fluid (SGF) was higher than that in SIF, which followed varied mechanism of water penetration by fitting Davidson and Peppas model. The extent of erosion was between 22.4 and 32.6% in SIF within 360 min. In vitro sophoridine release studies in successive different mimicking media showed that the guar matrix tablets released 13.5–25.6% of sophoridine in the first 6 h; therefore it was necessary to develop the bilayer matrix tablet by direct-compressing coating 100 mg guar granula on core tablet. The initial release of coated tablet was retarded and the bilayer matrix tablet was suitable for colon target.     

菌蚀型功能材料的合成与生物降解

设计与合成一种菌蚀型功能材料,探讨在模拟结肠环境下,材料降解性能与化学结构关系.用对甲基丙烯酰胺偶氮苯(BMAAB)为偶联剂,以偶氮二异丁腈(AIBN)为引发剂,以甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸甲酯(MMA)、甲基丙烯酸(MAA)为共单体,合成聚甲基丙烯酸羟乙酯-甲基丙烯酸-甲基丙烯酸甲酯[P(HEMA-MAA-MMA)]无规偶氮聚合物.用紫外、红外、核磁共振手段进行化学结构测定.测定该材料溶胀性能,建立体外厌氧条件下模拟结肠环境模型,用GPC凝胶色谱法、DSC差热分析法与SEM 扫描电镜法.比较聚合物降解前后分子量、热性能与形态变化.试验结果表明, 材料溶胀指数Q随材料中HEMA-MAA含量增加而增大.材料在模拟结构内容液环境中,降解程度与材料中亲水组分含量直接相关.该材料具有菌蚀功能,有望作为结肠靶向给药系统载体.     

Preparation and Characterization of Coacervate Microcapsules for the Delivery of Antimicrobial Oyster Peptides

Oyster peptides-loaded alginate/chitosan/starch microcapsules were prepared using external gelation method and internal emulsion gelation method. The solution of oyster peptides complexes was encapsulated into the microcapsules, which endowed the microcapsules with intestine passive targeting properties. The swelling behavior, encapsulation efficiency, and release behavior of oyster peptides from the microcapsules at different pH values were investigated. The microcapsules exhibited sustained release of the peptides in intestinal medium, and the release rate could be regulated by the pH value: in simulated gastric fluid, the release rate was greatly decreased, and in simulated body fluid and intestinal fluid, the microcapsules exhibited a sustained release in 24 h with different release rates. The microspheres were characterized by Fourier transform infrared. The results suggested that the alginate/chitosan/starch microcapsules could be a suitable copolymeric carrier system for intestinal protein or peptides delivery in the intestine.     

Preparation and characterization of coacervate microcapsules for the delivery of antimicrobial oyster peptides

Oyster peptides-loaded alginate/chitosan/starch microcapsules were prepared using external gelation method and internal emulsion gelation method. The solution of oyster peptides complexes was encapsulated into the microcapsules, which endowed the microcapsules with intestine passive targeting properties. The swelling behavior, encapsulation efficiency, and release behavior of oyster peptides from the microcapsules at different pH values were investigated. The microcapsules exhibited sustained release of the peptides in intestinal medium, and the release rate could be regulated by the pH value: in simulated gastric fluid, the release rate was greatly decreased, and in simulated body fluid and intestinal fluid, the microcapsules exhibited a sustained release in 24 h with different release rates. The microspheres were characterized by Fourier transform infrared. The results suggested that the alginate/chitosan/starch microcapsules could be a suitable copolymeric carrier system for intestinal protein or peptides delivery in the intestine.     

Effect of simulated gastrointestinal conditions on drug release from pectin/ethylcellulose as film coating for drug delivery to the colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Effect of Simulated Gastrointestinal Conditions on Drug Release from Pectin/Ethylcellulose as Film Coating for Drug Delivery to the Colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Synthesis of chemically cross-linked hydroxypropyl methyl cellulose hydrogels and their application in controlled release of 5-amino salicylic acid

The objective of this study was to achieve the colon-specific delivery of an anti-ulcerative colitis drug using hydroxypropyl methyl cellulose (HPMC) hydrogels. HPMC hydrogels containing poly ethylene glycol (PEG) as cross-links have been prepared by reacting HPMC sodium salt with polyethylene glycol dichloride.

The effect of cross-linking agent on swelling behavior of HPMC-PEG hydrogels, were investigated. Swelling parameters such as equilibrium degree of swelling, swelling ratio and network parameter such as molecular mass between cross-links (M_c) were determined. The cross-linking concentrations were 0.5%, 1%, 1.5%, and 2% (based on weight of HPMC). The equilibrium swelling ratio (Q) of cross-linked HPMC hydrogels increases from 13.2 to 27.1 as the cross-linker percentage increases from 0.5% to 2%. 5-Aminosalicylic acid (5-ASA) was used as a model of an anti-inflammatory drug. Cross-linked HPMC hydrogels were found to be a promising drug delivery system for the drugs to be delivered to the colon.     

Synthesis of Chemically Cross-Linked Hydroxypropyl Methyl Cellulose Hydrogels and their Application in Controlled Release of 5-Amino Salicylic Acid

The objective of this study was to achieve the colon-specific delivery of an anti-ulcerative colitis drug using hydroxypropyl methyl cellulose (HPMC) hydrogels. HPMC hydrogels containing poly ethylene glycol (PEG) as cross-links have been prepared by reacting HPMC sodium salt with polyethylene glycol dichloride.

The effect of cross-linking agent on swelling behavior of HPMC-PEG hydrogels, were investigated. Swelling parameters such as equilibrium degree of swelling, swelling ratio and network parameter such as molecular mass between cross-links (M_c) were determined. The cross-linking concentrations were 0.5%, 1%, 1.5%, and 2% (based on weight of HPMC). The equilibrium swelling ratio (Q) of cross-linked HPMC hydrogels increases from 13.2 to 27.1 as the cross-linker percentage increases from 0.5% to 2%. 5-Aminosalicylic acid (5-ASA) was used as a model of an anti-inflammatory drug. Cross-linked HPMC hydrogels were found to be a promising drug delivery system for the drugs to be delivered to the colon.     

Effect of Simulated Gastrointestinal Conditions on Drug Release from Pectin/Ethylcellulose as Film Coating for Drug Delivery to the Colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Development of novel interpenetrating network gellan gum-poly(vinyl alcohol) hydrogel microspheres for the controlled release of carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.