ZnO诱导的Pd/Al2O3@ZIF-8核壳催化剂制备及其催化性能

利用同源氧化锌有利于ZIF-8结构的成核生长原理,采用粒径为1~2 mm 的负载型Pd/Al₂O₃微球作为核、ZIF-8膜作为外壳,ZnO诱导生长制备了Pd/Al₂O₃@ZIF-8核壳催化剂,用XRD、EDX、SEM、ICP等分析手段对其结构进行了表征,并采用不同大小分子烯烃加氢反应对其壳层连续完整性进行了性能测试。结果表明,Pd/Al₂O₃微球表面预先引入的ZnO纳米粒子层对外层连续ZIF-8膜壳层的形成,起到了很好的成核生长点和连接点的作用,诱导合成了连续完整的ZIF-8膜包覆的Pd/Al₂O₃@ZIF-8核壳结构材料,ZIF-8膜层的厚度可通过ZIF-8合成的次数进行调变。该Pd/Al₂O₃@ZIF-8核壳催化剂对不同分子大小的烯烃加氢反应表现出明显的筛分选择性,并对外加苯并噻唑作为毒物分子的反应体系具有良好的抗中毒性能和防催化活性金属Pd组分流失的功能。     

Ni/Al2O3催化剂对高纯HCl中微量CO2甲烷化反应的催化性能

用浸渍法制备了以Al₂O₃为载体、Ni为活性组分的Ni/Al₂O₃二氧化碳甲烷化催化剂,在等温固定床反应器中研究了在Ni/Al₂O₃催化剂作用下,高纯氯化氢中微量CO₂甲烷化反应效果,并考察了温度、压力、氯化氢体积空速以及H₂/CO₂摩尔比对CO₂转化率的影响,同时研究了催化剂活性、稳定性及其再生性能。结果表明,在温度为250℃、压力为4.0 MPa、氯化氢空速为100 h^-1、H₂/CO₂摩尔比为500:1条件下,CO₂甲烷化反应效果最好,其转化率可达到90%左右,对于高纯氯化氢中微量CO₂的脱除起到很好的效果;催化剂在温度高于300℃时,反应不久后会迅速失活;催化剂再生性能只能部分恢复到新鲜水平。     

碱/碱土金属修饰Ni基催化剂的CO2吸附与甲烷化性能

采用分步浸渍法制备了碱/碱土金属修饰Ni基催化剂Ni-M/Al₂O₃ (M=K₂CO₃, Na₂CO₃, MgO, CaO)。探究了碱/碱土金属的添加对改性Ni基催化剂CO₂吸附和甲烷化性能的影响。研究发现,碱/碱土金属的添加提高了Ni/Al₂O₃催化剂表面的碱性活性位点密度,强化了其CO₂吸附性能。碱/碱土金属类型影响Ni-M/Al₂O₃催化剂碱性活性位点的分布、NiO物相的转化及Ni的分散度,进而影响其甲烷化性能。MgO添加使NiO物相转化为与载体呈强相互作用的β型和γ型NiO,降低了催化剂表面的强碱性活性位点比例,有利于CO₂吸附活化。Ni-MgO/Al₂O₃的CO₂吸附容量最高为0.68mmolCO₂/g,其CO₂转化率和CH₄选择性分别高达58.4%和95.4%,其在烟气CO₂捕集与原位甲烷化中极具应用前景。     

CeO2-Al2O3复合载体负载Ni基催化剂催化COx共甲烷化性能

通过浸渍沉淀法分别制备Ni/Al₂O₃、Ni/CeO₂和Ni/CeO₂-Al₂O₃催化剂，并对其分别进行不同CO/CO₂比例下COx共甲烷化性能评价。发现Ni/Al₂O₃催化剂催化CO转化为CH4的能力明显高于Ni/CeO₂，而催化CO₂甲烷化的性能则相反。采用Ni/CeO₂-Al₂O₃催化剂，可以在提高CO转化率的同时而不降低CO₂转化率。结合BET、XRD、TPR、TPD和原位红外等各种表征手段，发现CeO₂掺杂虽然降低了催化剂的比表面积和金属Ni的分散度，但却可明显提高其吸附活化CO₂的能力，这主要是由于具有较高含量氧空位的CeO₂的掺杂可以提高载体表面碱性位，促使共甲烷过程中CO_...     

二氧化碳甲烷化催化剂的研究进展

CO₂催化加氢甲烷化反应是温室气体CO₂资源化利用的有效途径之一。本文回顾了CO₂催化加氢甲烷化催化剂的研究现状, 其中Ni基催化剂是研究最为广泛的CO₂甲烷化催化剂。重点介绍了Al₂O₃、SiO₂和La₂O₃载体及CeO₂和La₂O₃助剂等对Ni基催化剂CO₂甲烷化性能的影响, 阐述了载体的结构、电子性能、化学性能和助剂等对Ni基催化剂CO₂甲烷化性能的影响。结合几种非Ni基CO₂甲烷化催化剂的对比研究发现, 具有有序介孔结构的Co基催化剂也表现出了优越的CO₂甲烷化性能。由此表明, 催化剂新颖的结构也是影响CO₂甲烷化性能的重要因素, 通过催化剂结构、组成等的调变, 能实现CO₂低温高效甲烷化, 为CO₂甲烷化工业化进程奠定基础。     

ZrO2-Al2O3复合氧化物催化反应精馏合成碳酸二甲酯

采用共沉淀法制备了一系列不同Al₂O₃含量的ZrO₂-Al₂O₃复合氧化物,并在催化精馏实验装置中考察了该催化剂在碳酸丙烯酯（PC）与甲醇酯交换制备碳酸二甲酯（DMC）过程中的催化性能。通过X射线衍射（XRD）、红外光谱（FTIR）、X射线光电子能谱（XPS）、CO₂程序升温脱附（CO₂-TPD）和NH₃程序升温脱附（NH₃-TPD）等手段对所制备的催化剂进行了表征。结果表明,催化剂表面存在的酸碱性位点是制约PC与甲醇酯交换性能的重要因素。复合氧化物中Al₂O₃含量可以有效调控催化剂的结构特征和表面的酸碱性质,不同于ZrO₂或Al₂O₃单金属催化剂,复合氧化物ZrO₂-Al₂O₃在合成过程中形成了稳定的固溶体结构,导致催化剂表面弱酸量增加,并产生了强碱位点。数据分析表明,催化剂表面的强碱和弱酸含量高时,其催化活性高,说明该反应具有酸碱协同催化作用。当Zr/Al比为1时,弱酸和强碱量均达到最大值,PC的转化率和DMC选择性可达到98.14%和99.96%。催化剂在经过12次循环使用后依旧保持较高的活性,具有良好的结构稳定性。     

负载碱催化剂在Prins反应中的应用

分别采用浸渍法和共沉淀法制备了负载金属氧化物的固体碱催化剂M_nO/Al₂O₃ (M=Na,K,Cs,Mg,Ca,Sr;n=1,2)和C-Cs₂O/Al₂O₃,测定了催化剂的碱量和pK_a值,分别采用CO₂-TPD、X射线衍射、N₂物理吸附表征了催化剂的物理化学性质。以异丁烯与多聚甲醛经Prins反应制备3-甲基-3-丁烯-1-醇(MBO)为体系考察催化剂活性。结果表明,催化剂的碱性和结构直接影响其催化活性,采用共沉淀法制备的Cs₂O/Al₂O₃催化剂具有更强的碱性,表现出了优越的反应活性,甲醛的转化率和产物MBO的选择性分别为100.0%和86.0%。探讨了固体碱催化反应的机理,发现碱性位可以活化异丁烯的a-H,促进Prins反应。     

新型合成气甲烷化催化剂La2O3-ZrO2-Ni/Al2O3的制备与性能

针对常规合成气甲烷化催化剂高热结构稳定性差、活性低、适应性差等不足,本文创新地引用稀土金属氧化物La₂O₃复配过渡金属氧化物ZrO₂作为多功能复合助剂,利用反向沉淀法制备了新型合成气甲烷化催化剂La₂O₃-ZrO₂-Ni/Al₂O₃,同时制备催化剂Cr₂O₃-Ni/Al₂O₃作为参照组。采用X射线衍射（XRD）、透射电子显微镜（TEM）表征了催化剂的微观结构,并利用N₂吸附仪（BET）测量催化剂经高温水热处理前后的微孔结构参数,以考察催化剂的高热结构稳定性。结合国内某大型煤制天然气项目工艺特征和运行实践,应用Aspen Plus软件模拟了四段甲烷化工艺理论平衡值。基于自主固定床合成气甲烷化评价实验装置,考察了反应压力、空速和原料气H₂O(g)含量等因素对La₂O₃-ZrO₂-Ni/Al₂O₃催化性能的影响,并开展了1000h长周期寿命评价实验。结果表明,La₂O₃-ZrO₂-Ni/Al₂O₃比Cr₂O₃-Ni/Al₂O₃具有更优的高热结构稳定性;可使CO和CO₂反应达到或接近催化剂床层出口温度下的理论平衡状态,呈现显著的宽温活性;活性组分NiO晶粒尺寸介于7~10nm,分散度较高;对反应压力、空速和原料气H₂O(g)含量的变化不敏感,具有良好的操作弹性;1000h反应后仍能保持较高的活性和稳定性。     

负载型Pt-Fe/Al2O3催化剂用于室温催化氧化甲醛

采用胶体沉积法制备不同载体（Ni₂O₃、Co₃O₄、TiO₂、Al₂O₃）的Pt-Fe/MeO_x催化剂用于甲醛室温催化氧化。活性测试表明,以γ-Al₂O₃为载体的Pt-Fe/Al₂O₃催化剂具有较高的催化活性,在25℃时甲醛的转化率可达到100%,而且Pt-Fe/ Al₂O₃催化剂还表现出良好的稳定性。采用各种表征技术对Pt-Fe/Al₂O₃的形貌、价态及氧化还原性等物理化学性质进行了研究,结果表明：Pt-Fe/Al₂O₃催化剂中Pt物种和Fe物种在Al₂O₃载体的表面上均匀分散;二者之间存在着较强的相互作用,在Al₂O₃载体的表面上形成一些类似Pt-O-Fe活性物种,有效促进了Pt-Fe/Al₂O₃催化性能,从而显示出较高的氧化活性。     

Research progress of TiO2?Al2O3 composite support

TiO₂·Al₂O₃多孔复合氧化物是新型的催化剂载体材料,因其在加氢精制工艺上能够显著增加催化剂的脱硫、脱氮活性而逐渐受到重视。本文综述了国内外关于TiO₂·Al₂O₃多孔材料的制备方法,分析了制备方法对材料的比表面积、孔结构、表面酸性等载体性能影响的一般规律。通过对国内外研究者的TiO₂·Al₂O₃合成方法的综合评述,指出了有待发展提高的方向。     

ZrO2/SiO2- and La2O3/Al2O3-supported platinum catalysts for CH4/CO2 reforming

Surface-phase ZrO₂ on SiO₂ (SZrOs) and surface-phase La₂O₃ on Al₂O₃ (SLaOs) were prepared with various loadings of ZrO₂ and La₂O₃, characterized and used as supports for preparing Pt/SZrOs and Pt/SLaOs catalysts. CH₄/CO₂ reforming over the Pt/SZrOs and Pt/SLaOs catalysts was examined and compared with Pt/Al₂O₃ and Pt/SiO₂ catalysts. CO₂ or CH₄ pulse reaction/adsorption analysis was employed to elucidate the effects of these surface-phase oxides.

The zirconia can be homogeneously dispersed on SiO₂ to form a stable surface-phase oxide. The lanthana cannot be spread well on Al₂O₃, but it forms a stable amorphous oxide with Al₂O₃. The Pt/SZrOs and Pt/SLaOs catalysts showed higher steady activity than did Pt/SiO₂ and Pt/Al₂O₃ by a factor of three to four. The Pt/SZrOs and Pt/SLaOs catalysts were also much more stable than the Pt/SiO₂ and Pt/Al₂O₃ catalysts for long stream time and for reforming temperatures above 700 °C. These findings were attributed to the activation of CO₂ adsorbed on the basic sites of SZrOs and SLaOs.     

Ni/Al_2O_3催化剂的CO_2-TPD表征

Ni/Al_2O_3催化剂是甲烷二氧化碳重整反应制取合成气研究最多、最具应用潜力的一种催化剂。通过对催化剂进行CO_2-TPD研究,考察还原态Ni/Al_2O_3催化剂的CO_2脱附特性。结果表明,浸渍法制备的Ni/Al_2O_3催化剂CO_2脱附曲线呈现双峰,分别在(60~65)℃和(350~380)℃出现高低温两个活性位;高温CO_2吸附量为3.0 cm~3·g~(-1),低温CO_2吸附量为24.0 cm~3·g~(-1)。催化剂的CO_2吸附量与其Ni含量无关。考察选用不同载体的CO_2脱附行为,发现以Al_2O_3为载体的催化剂CO_2吸附量是MgO和SiO_2为载体催化剂的2~4倍,以TiO_2为载体的催化剂几乎不吸附CO_2。     

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L~(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.     

Promoting effects of CO2 on dehydrogenation of propane over a SiO2-supported Cr2O3 catalyst

The effects of carbon dioxide on the dehydrogenation of C₃H₈ to produce C₃H₆ were investigated over several Cr₂O₃ catalysts supported on Al₂O₃, active carbon and SiO₂. Carbon dioxide exerted promoting effects only on SiO₂-supported Cr₂O₃ catalysts. The promoting effects of carbon dioxide over a Cr₂O₃/SiO₂ catalyst were to enhance the yield of C₃H₆ and to suppress the catalyst deactivation.     

Effect of copper species and the presence of reaction products on the activity of methane oxidation on supported CuO catalysts

The activity of the various CuO species found in supported copper catalysts and the effect of the presence of reaction products, CO₂ and H₂O, was studied during the complete oxidation of methane. Series of copper catalysts supported on ZrO₂, Al₂O₃ and SiO₂ with different metal concentrations were analyzed under identical experimental conditions of reactant concentration and temperature. The catalysts were characterized by TPR, UV–vis spectroscopy and XRD. The results show that the activity of supported CuO is closely related to the kind of Cu species formed on the different supports. It was found that the Cu species formed on ZrO₂ and Al₂O₃ are dependent on the metal loading/support's surface area ratio, and that the activity of highly dispersed Cu is substantially higher than that of bulk CuO. In the case of silica, only the formation of bulk CuO was detected, accounting for the low activity of CuO/SiO₂ catalysts. The activity of highly dispersed Cu species formed on ZrO₂ is higher than those formed over Al₂O₃, and it is not significantly affected by the formation of bulk CuO on the surface. On the contrary, the activity of copper species formed on alumina decreases continuously as the Cu loading is increased. Thus, for the range of copper loading studied in this work, the activity of the catalysts, per gram of loaded Cu, follows the sequence: CuO/ZrO₂ > CuO/Al₂O₃  CuO/SiO₂. It was also found that CO₂ does not inhibits the activity of the CuO/ZrO₂ catalysts, while water inhibits the combustion reaction of methane, with an estimated reaction order of about −0.2 for temperatures between 360 °C and 420 °C.     

CO oxidation over promoted Pt catalysts

A study of CO oxidation by O₂ over Pt catalysts, promoted by MnO_x and CoO_x, is described. The activities of Pt/SiO₂, Pt/MnO_x/SiO₂ and Pt/CoO_x/SiO₂ are compared with commercial Pt/Al₂O₃, Pt/Rh/Al₂O₃ and Pt/CeO_x/Al₂O₃ catalysts. Since these catalysts differ in dispersion and weight loading of platinum, the turnover frequencies are also compared. The following order in activity in CO oxidation after a reductive pretreatment is found: Pt/CoO_x/SiO₂ > Pt/MnO_x/SiO₂, Pt/CeO_x/Al₂O₃ > Pt/Al₂O₃, Pt/Rh/Al₂O₃, Pt/SiO₂. Over Pt/CoO_x/SiO₂ CO is already oxidised at room temperature. Possible models to account for the high activity of Pt/CoO_x/SiO₂ in the CO/O₂ reaction are presented and discussed. Partially reduced metal oxides are necessary to increase the activity of the Pt/CoO_x/SiO₂, Pt/MnO_x/SiO₂ or Pt/CeO_x/Al₂O₃ catalysts. It was shown that mild ageing treatments did not affect the activity of the Pt/CoO_x/SiO₂ catalyst in CO oxidation.     

Catalytic removal of perchloroethylene (PCE) over supported chromium oxide catalysts

The oxidation of perchloroethylene (PCE) was investigated over chromium oxide catalysts supported on SiO₂, SiO₂–Al₂O₃, activated carbon, mordenite type zeolites, MgO, TiO₂ and Al₂O₃. Supported chromium oxide catalysts were more active than any other metal oxide catalysts including noble metal examined in the present study. PCE removal activity of chromium oxide catalysts mainly depended on the type of supports and the content of metal loaded on the catalyst surface. TiO₂ and Al₂O₃ containing high surface areas were effective for the high performance of PCE removal, since the formation of well dispersed Cr(VI) active reaction sites for the present reaction system, was enhanced even for the high Cr loading on the catalyst surface. CrO_x catalysts supported on TiO₂ and Al₂O₃ also exhibited stable PCE removal activity at a low feed concentration of PCE of 30 ppm up to 100 h at 350°C. However, significant catalyst deactivation was observed at high PCE concentration of 10 000 ppm. CrO_x/TiO₂ revealed stronger water tolerance than CrO_x/Al₂O₃ due to the surface hydrophobicity.