修饰的COF-102吸附和分离CO2/CH4的计算机模拟（英文）

Covalent organic framework (COF) is a porous material with low density and large BET (Brun-auer-Emmett-Teller) surface area. They have great potential in gas adsorption and separation. In this work, the ad-sorption of pure CO2 and CO2/CH4 mixture on modified COF-102 was simulated by using GCMC (grand canonical Monte Carlo). Metal Li was incorporated into COF-102 through three doping methods, including charge exchange, O--Li+ dipolar interaction and O--Li+ chemical bonding. The influence of Li doping on the adsorption of CO2 was studied. The results showed that among the three methods, the dipole doping is the best way to improve CO2 ad-sorption performance. Further, the ligands of COF-102 were replaced by extended aromatic moieties, such as di-phenyl and pyrene. The adsorption capacity of CO2 and CH4, and the selectivity of CO2/CH4 on the ligand-replaced COF-102 were studied. The capacity of CO2 and CH4 on the ligand-replaced COF-102 had obvious changes; hence the selectivity of CO2/CH4 can be adjusted accordingly.     

使用纤维素-钛白粉复合扩张床阴离子吸附剂提取D-2-氯丙酸脱卤酶

The TiO2-densified cellulose composite beads were activated by epichlorohydrin and coupled with diethylamine, to function as an anion exchanger for expanded bed chromatography. The adsorbent exhibited a favorable performance of expanded bed adsorption for proteins, and therefore was applied to the expanded bed recovery of D-2-chloropropionic acid dehalogenase directly from the unclarified homogenate of Pseudomonas sp. NT21. The binding capacity of the dehalogenase was found to be 8.54U·ml^-1 adsorbent, and two active peaks were eluted respectively at 0.15mol·L^-1 and 0.3mol·L^-1 （NH4）2SO4. The result indicated that the overall enzyme yield was 68%, with a purification factor of 22. In comparison to other recovery processes, the yield of the expanded bed process rises at least 70%, simultaneously saving a great deal of operation time and costs.     

污泥含炭吸附剂的制备及其吸附模拟烟气中汞蒸汽的应用(英文)

The carbonaceous adsorbent was prepared from mixtures of dewatered sludge and sawdust with enhanced ZnCl2 chemical activation.Characteristics of the adsorbent were studied using scanning electron microscope(SEM) ,Fourier transform infrared spectroscopy(FT-IR) ,and adsorption of nitrogen.The surface analysis showed that the carbonaceous adsorbent had good specific surface and porosity(394 m 2 ·g-1of BET surface,0.12 and 0.10 ml·g-1of microporous and mesoporous volume,respectively) .The oxygen functional groups such as OH,C O and C O were found on the surface by FTIR and XPS(X-ray photoelectron spectroscopy) .The adsorption of elemental mercury(Hg0) on the carbonaceous adsorbent was studied in a fixed bed reactor.The dynamic adsorption capacity of carbonaceous adsorbent increased with influent mercury concentration,from 23.6μg·g-1at 12.58μg·m-3to 87.9μg·g-1at 72.50μg·m-3,and decreased as the adsorption temperature increased,from 246 μg·g-1 at 25°C to 61.3μg·g-1 at 140°C,when dry nitrogen was used as the carrier gas.The carbonaceous adsorbent presented higher dynamic adsorption capacity than activated carbon,which was 81.2μg·g-1and 53.8μg·g-1respectively.The adsorption data were fitted to the Langmuir adsorption model.The physical and chemical adsorption were identified on the adsorbent.     

皮胶原纤维负载钦对核工业废水中铀的去除(英文)

Effective recovery of UO2+2 from wastewater is essential for nuclear fuel industry and related industries.In this study,a novel adsorbent was prepared by loading titanium(Ti4+) onto collagen fiber(TICF),and its physical and chemical properties as well as adsorption to UO2+2 in nuclear fuel industrial wastewater were investigated.It is found that TICF can effectively recover UO2+2 from the wastewater with excellent adsorption capacity.The adsorption capacity is 0.62 mmol·g-1 at 303 K and pH 5.0 when the initial concentration of UO2+2 is 1.50 mmol·L-1.The adsorption isotherms can be described by the Langmuir equation and the adsorption capacity increases with temperature.The effect of co-existed F on the adsorption capacity for UO2+2 is significant,which can be eliminated by adding aluminum ions as complexing agent,while the other co-existed ions in the solutions,including HCO-3,Cl-,NO-3,Ca2+,Mg2+ and Cu2+,have little effect on the adsorption capacity for UO2+2.The saturated TICF after UO2+2 adsorption can be regenerated by using 0.2 mol·L-1 nitrate(HNO-3) as desorption agent,and the TICF can be reused at least three times.Thus the TICF is a new and effective adsorbent for the recovery of UO2+2 from the wastewater.     

Adsorption Refrigeration Performance of Shaped MIL-101-Water Working Pair

A new metal-organic framework of MIL-101 was synthesized by hydrothermal method and the powder prepared was pressed into a desired shape. The effects of molding on specific surface area and pore structure were investigated using a nitrogen adsorption method. The water adsorption isotherms were obtained by high vacuum gravimetric method, the desorption temperature of water on shaped MIL-101 was measured by thermo gravimetric analyzer, and the adsorption refrigeration performance of shaped MIL-101-water working pair was studied on the simulation device of adsorption refrigeration cycle system. The results indicate that an apparent hysteresis loop ap-pears in the nitrogen adsorption/desorption isotherms when the forming pressure is 10 MPa. The equilibrium ad-sorption capacity of water is up to 0.95 kg·kg^-1 at the forming pressure of 3 MPa （MIL-101-3）. The desorption peak temperature of water on MIL-101-3 is 82℃, which is 7 ℃ lower than that of silica gel, and the desorption temperature is no more than 100 ℃. At the evaporation temperature of 10 ℃, the refrigeration capacity of MIL-101-3-water is 1059 kJ·kg^-1, which is 2.24 times higher than that of silica gel-water working pair. Thus MIL-101-water working pair presents an excellent adsorption refrigeration performance.     

Adsorption/desorption of toluene on a hypercrosslinked polymeric resin in a highly humid gas stream

In many sources of volatile organic compounds(VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity(RH) of exhaust gas is normally N60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration.This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of b30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs.In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/desorption cycles of toluene purging with nitrogen gas at 120 °C. The resin exhibited excellent regeneration performance at high humidity.     

MCM-36 zeolites tailored with acidic ionic liquid to regulate adsorption properties of isobutane and 1-butene☆

Adsorption properties of an adsorbent or a catalyst towards adsorbates are crucial in the process of adsorption separation or catalytic reaction. Surface morphology and structure of adsorbents have a significant impact on the adsorption properties. In this study, a novel acidic ionic liquid, 1-butyl-3-(triethoxysilylpropyl)imidazolium hydrogen sulfate(i.e., [BTPIm][HSO_4]), was synthesized and subsequently grafted onto the MCM-36 zeolite for the regulation of its adsorption properties towards isobutane and 1-butene. The resultant [BTPIm][HSO_4]-immobilized MCM-36(i.e., MCM-36-IL) was characterized by FT-IR, XPS, XRD, SEM, TG/DTG and N_2 adsorption–desorption measurement. It was found that the specific surface area, micropore volume and mesopore volume of the MCM-36 support underwent a reduction upon the immobilization of ionic liquid,while the surface density of acid increased from 0.0014 to 0.0035 mmol·m~(-2). The adsorption capacity of isobutane and 1-butene on the MCM-36-IL was determined by a static volumetric method. Results demonstrated that the interaction between isobutane and MCM-36-IL was enhanced and the interaction between 1-butene and MCM-36-IL was reduced. As a result, a tunable adsorption ratio of isobutane/1-butene on MCM-36 was achieved.With the increase in surface density of acid and the tunable adsorption ratio of isobutane and 1-butene on the functionalized MCM-36, the acidic ionic liquid-immobilized zeolites are beneficial to obtain an improved reaction yield and a prolonged catalyst life in the reactions catalyzed by solid acid.     

以F200和Sorbead WS为保护层真空变压吸附捕集CO2（英文）

In order to solve the water issues when 13X zeolite was applied to capture CO 2 from wet flue gas by vacuum swing adsorption process, multi-layered adsorption system was considered regarding activated alumina F200 and silica gel based Sorbead WS as pre-layer materials. LBET (extended Largmuir-BET) model and extended CMMS (cooperative multimolecular sorption) equation were simulated respectively to describe water loading on F200 and Sorbead WS. The two equations can be well added into our in-house simulator to simulate double-layered CO 2 -VSA (vacuum swing adsorption) process. Results indicated that water can be successfully stopped in pre-layers with a good CO 2 capture performance.     

Hydrous cerium oxides coated glass fiber for efficient and long-lasting arsenic removal from drinking water

A novel arsenic adsorbent with hydrous cerium oxides coated on glass fiber cloth(HCO/GFC)was synthesized.The HCO/GFC adsorbents were rolled into a cartridge for arsenic removal test.Due to the large pores between the glass fibers,the arsenic polluted water can flow through easily.The arsenic removal performance was evaluated by testing the equilibrium adsorption isotherm,adsorption kinetics,and packed-bed operation.The pH effects on arsenic removal were conducted.The test results show that HCO/GFC filter has high As(Ⅴ)and As(Ⅲ)removal capacity even at low equilibrium concentration.The more toxic As(Ⅲ)in water can be easily removed within a wide range of solution p H without pre-treatment.Arsenic contaminated ground-water from Yangzong Lake(China)was used in the column test.At typical breakthrough conditions(the empty bed contact time,EBCT=2 min),arsenic researched breakthrough at over 24,000 bed volumes(World Health Organization(WHO)suggested that the maximum contaminant level(MCL)for arsenic in drinking water is 10 mg/L).The Ce content in the treated water was lower than 5 ppb during the column test,which showed that cerium did not leach from the HCO/GFC material into the treated water.The relationship between dosage of adsorbents and the adsorption kinetic model was also clarified,which suggested that the pseudo second order model could fit the kinetic experimental data better when the adsorbent loading was relatively low,and the pseudo first order model could fit the kinetic experimental data better when the adsorbent loading amount was relatively high.     

Development of a pentaethylenehexamine-modified solid support adsorbent for CO2 capture from model flue gas☆

A novel solid support adsorbent for CO2 capture was developed by loading pentaethylenehexamine (PEHA) on commercial y available mesoporous molecular sieve MCM-41 using wet impregnation method. MCM-41 s...     

Adsorption equilibrium of citric acid from supercritical carbon dioxide/ethanol on cyano column

Supercritical adsorption equilibrium has a significant role in defining supercritical adsorption behavior. In this paper, the adsorption equilibrium of citric acid from supercritical CO2/ethanol on a cyano column was systemat-ical y investigated with the elution by characteristic point method. Equilibrium loading was obtained at 313.15 K and 321.15 K with supercritical CO2/ethanol densities varying from 0.7068 g·cm?3 to 0.8019 g·cm?3. The exper-imental results showed that the adsorption capacity of citric acid decreased with increasing temperature and in-creasing density of the supercritical CO2/ethanol mobile phase. The adsorption equilibrium data were fitted wel by the Quadratic Hill isotherm model and the isotherms showed anti-Langmuir behavior. The monolayer satura-tion adsorption capacity of citric acid is in the range of 44.54 mg·cm?3 to 64.66 mg·cm?3 with an average value of 56.86 mg·cm?3.     

氨改性的介孔二氧化硅的直接合成和CO2吸附

Amine-functionalized mesoporous silica was prepared by using lauric acid and N-stearoyl-l-glutamic acid as structure directing agents via the SN+-I mechanism and applied to CO2 adsorption at room temperature. With γ-aminopropyltriethoxysilane as co-structure directing agent and due to the direct electrostatic interaction with anionic surfactant, most of the amino groups were uniformly distributed at the inner surface of pores and the performance was stable. The amine-functionalized mesoporous silica was characterized by Fourier transform infrared spectrometer, X-ray diffraction, nitrogen physisorption and thermogravimetric analysis. The CO2 adsorption capacity was measured by digital recording balance. At the room temperature and under the atmospheric pres-sure, the adsorption capacity of LAA-AMS-0.2 for CO2 and N2 is 1.40 mmol•g1 and 0.03 mmol•g1, respectively, indicating high separation coefficient of CO2/N2.     

Hierarchical pore structure of activated carbon fabricated by CO2/microwave for volatile organic compounds adsorption

An activated carbon pore-expanding technique was achieved through innovative reactivation by CO_2/microwave.The original and modified activated carbons were characterized by nitrogen adsorption–desorption,scanning electron microscopy,transmission electron microcopy,and Fourier transform infrared spectroscopy.The mesopore volume increased from 0.122 cm~3·g~(-1) to 0.270 cm~3·g~(-1),and a hierarchical pore structure was formed.A gradual decrease in the phenolic hydroxyl and carboxyl groups on the surface of activated carbon enhanced the surface inertia of granular activated carbon(GAC).The toluene desorption rate of the modified sample increased by 8.81% compared with that of the original GAC.Adsorption isotherm fittings revealed that the Langmuir model was applicable for the original and modified activated carbons.The isosteric adsorption heat of toluene on the activated carbon decreased by approximately 50%,which endowed the modified sample with excellent stability in application.The modified samples showed an enhanced desorption performance of toluene,thereby opening a way to extend the cycle life and improve the economic performance of carbon adsorbent in practical engineering applications.     

基于矩法和时间域分析法研究稠密CO2中甲苯和对氯苯在硅胶固定床系统中的吸附和传递性质

Based on chromatographic theory, the moment method and the time-domain fitting analysis were applied to measure and evaluate the adsorption equilibrium constant and mass transfer properties (axial dispersion coefficient and effective intra-particle diffnsivity) for toluene and p-dichlorobenzene on silica gel adsorbent in the subcritical and supercritical CO2. An apparatus based on supercritical fluid chromatography was established and the experiments were performed at temperatures of 298.15-318.15 K and pressures of 7.5-17.8 MPa. The two methods have been compared. The results show that for the systems studied here the moment method can give reasonable values for both adsorption equilibrium constant and mass transfer properties, but the time-domain analysis only can obtain the adsorption equilibrium constant. The dependence of adsorption equilibrium constant and mass transfer properties on temperature and pressure was investigated.     

用于乙醇脱水的生物质吸附性能

The adsorption capability of paddy flour and maize flour for gaseous phase selective adsorption for ethanol dehydration was investigated via a bench-test fixed-bed adsorber at constant temperature. Ethanol concentration in the feed was 93.4% (mass) and each of the dried biomass was used as adsorbent, and breakthrough curves and temperature distribution in adsorptive bed were obtained for different bed depths,superficial velocities, granularities of adsorbent and temperatures. Bed pressure drop curves for different bed depths and superficial velocities were also measured. A product of ethanol purity of 99.5% (mass) could be obtained through both kinds of biomass adsorbent. When 99.5% (mass) of ethanol purity is defined as the breakthrough point, the production capacity for either adsorbent was within 0.0915-0.2256 (gram product/gram adsorbent). Tests on pure ethanol adsorption were also performed to extrapolate the selectivity of both adsorbents.     

0.4nm分子筛负载Cu-Ni双金属催化剂用于CO2和CH3OH直接合成碳酸二甲酯（英文）

The 0.4 nm molecular sieve supported Cu-Ni bimetal catalysts for direct synthesis of dimethyl carbonate (DMC) from CO 2 and CH 3 OH were prepared and investigated. The synthesized catalysts were fully characterized by BET, XRD (X-ray diffraction), TPR (temperature programmed reduction), IR (infra-red adsorption), NH 3-TPD (temperature programmed desorption) and CO 2-TPD (temperature programmed desorption) techniques. The results showed that the surface area of catalysts decreased with increasing metal content, and the metals as well as Cu-Ni alloy co-existed on the reduced catalyst surface. There existed interaction between metal and carrier, and moreover, metal particles affected obviously the acidity and basicity of carrier. The large amount of basic sites facilitated the activation of methanol to methoxyl species and their subsequent reaction with activated carbon dioxide. The catalysts were evaluated in a continuous tubular fixed-bed micro-gaseous reactor and the catalyst with bimetal loading of 20% (by mass) had best catalytic activities. Under the conditions of 393 K, 1.1 MPa, 5 h and gas space velocity of 510 h 1 , the selectivity and yield of DMC were higher than 86.0 % and 5.0 %, respectively.     

菌丝体-甲壳素水处理剂对重金属离子吸附性能的研究

The adsorption properties of chitin adsorbent from mycelium of fermentation industries for the removal of heavy metal ions were studied.The result shows that the chitin adsorbent has high adsorption capacity for many heavy metal ions and Ni^2 in citric acid.The influence of pH was significant:When pH is higher than 4.0,the high adsorption capacity is obtained.otherwise H^ ion inhibits the adsorption of heavy metal ions.The comparison of the chitin adsorbent with some other commercial adsorbents was made,in which that the adsorption behavior of chitin adsorbent is close to that of commercial cation exchange adsorbents,and its cost is much lower than those commercial adsorbents.     

Performance of Ni/Nano-ZrO2catalysts for CO preferential methanation简

Large surface areas nano-scale zirconia was prepared by the self-assembly route and was employed as support in nickel catalysts for the CO selective methanation. The effects of Ni loading and the catalyst calcination temperature on the performance of the catalyst for CO selective methanation reaction were investigated. The cata- lysts were characterized by Brunauer-Emmett-Teller （BET）, transmission electron microscope （TEM）, X-ray dif- fraction （XRD） and temperature-programmed reduction （TPR）. The results showed that the as-synthesized Ni/nano-ZrO2 catalysts presented high activity for CO methanation due to the interaction between Ni active particle and nano zir- conia support. The selectivity for the CO methanation influenced significantly by the particle size of the active Ni species. The exorbitant calcination resulted in the conglomeration of dispersive Ni particles and led to the decrease of CO methanation selectivity. Among the catalysts studied, the 7.5% （by mass） Ni/ZrO2 catalyst calcinated at 500℃ was the most effective for the CO selective methanation. It can preferentially catalyze the CO methanation with a higher 99% conversion in the CO/CO2 competitive methanation system over the temperature range of 260-280℃, while keeping the CO2 conversion relatively low.     

Column breakthrough studies for the removal and recovery of phosphate by lime-iron sludge: Modeling and optimization using artificial neural network and adaptive neuro-fuzzy inference system

Increases in the treatment of water to meet the growing water demand ultimately result in unmanageable quantities of residuals, the handling, and disposal of which is a major environmental issue. Consequently, research into beneficial reuse of water treatment residuals continues unabated. This study investigated the applicability of lime-iron sludge for phosphate adsorption by fixed-bed column adsorption. Laboratory-scale experiments were conducted at varying flow rates and bed depths. Fundamental and empirical models(Thomas, Yan,Bohart-Adams, Yoon-Nelson, and Wolboroska) as well as artificial intelligence techniques(Artificial neural network(ANN) and Adaptive neuro-fuzzy inference system(ANFIS)) were used to simulate experimental breakthrough curves and predict column dynamics. Increase in flow rate resulted in reduced adsorption capacity.However, adsorption capacity was not affected by bed depth. ANN was superior in predicting breakthrough curves and predicted breakthrough times with high accuracy(R~20.9962). Na OH(0.5 mol·L~(-1)) was successfully used to regenerate the adsorption bed. After nine cyclic adsorption/desorption runs, only a marginal decrease in adsorption and desorption efficiencies of 10% and 8% respectively was observed. The same regenerate Na OH solution was reused for all desorption cycles. After nine cycles the eluent desorbed a total of 1550 mg phosphate exhibiting potential for further reuse.     

改性大豆皮吸附剂对Pb2+的生物吸附性能研究

Using soybean hull residue after the soluble dietary fiber being removed during the soybean processing industry as crude material,a novel absorbent,modified soybean hulls,is prepared.Its adsorption behavior for Pb2+ is studied.The adsorbent has a large and efficient adsorption capacity for Pb2+,up to 20% of the mass of dry ad-sorbent.Its maximum adsorption capacity for Pb2+ reaches 217 mg·g-1 at initial Pb2+ concentration of 2000 mg·L-1,which is twice that of yeast absorbent and threefold greater than that of chitosan absorbent.The adsorption ability is sensitive to pH value in the solution and the optimal pH for adsorption of Pb2+ is 7.0.In the presence of other metal ions (Ca2+,Mg2+ and Na+) in the solution,their effect on the adsorption capacity for Pb2+ is not obvious.After 5 cy-cles of adsorption,80% adsorption capacity of Pb2+ is maintained.Compared with various available commercial resins,the modified soybean hulls are a plentiful,inexpensive and effective medium for the capture of dissolved Pb2+ from waste streams.