塑料异型矩鞍填料的流体力学及传质性能研究

在内径300 mm塔中,以空气-氨-水为物系,对开发出的一种新型塑料散装填料———异型矩鞍填料的流体力学及传质性能进行了研究。获得了该填料的几何特性、流体力学性能及传质性能数据,并通过对实验数据的回归分析,得出了填料层压降Δp/Z、泛点填料因子F及气相总传质单元高度HOG的关联式。研究结果表明,塑料异型矩鞍填料具有通量大、压降低、气液分布均匀及传质性能优良等优点。     

国产BG—10型压延孔板波纹填料性能的研究

用冷，热模实验研究了ＢＧ－１０型压延孔板波纹填料的流体力学的传质性能，得出了计算其压降和泛点的关联式。并与孔板波纹填料（２５０ｙ）进行了对比，发现该填料的性能优于２５０Ｙ孔板波纹填料。     

国产BG-10型压延孔板波纹填料性能研究

用冷、热模实验研究了ＢＧ－１０型压延孔板波纹填料的流体力学和传质性能．得出 了计算其压降和泛点的关联式。并与孔板波纹填料（２５０ｙ）进行了对比，发现该填料 的性能优于２５０Ｙ孔板波纹填料。     

塑料花环填料的流体力学及传质性能研究

本实验用空气-水-氨体系,在内径为φ600 mm的塔中,对塑料花环填料进行了流体力学及传质特性的测试。结果表明花环填料通量大、压降低、在高液体负荷下具有极好的传质性能,而且耐腐蚀、不易堵塞。实验测定的塔填料因子和传质系数有设计参考意义。     

塑料扁环填料流体力学及传质性能的研究

在内径φ30 0 mm塔中 ,以空气 -氨 -水为物系 ,对塑料扁环填料的流体力学及传质性进行了研究。获得了该填料的几何特性、泛点填料因子ΦF、压降填料因子ΦP及气相传质单元高度 HOG与气相传质系数 KGa,该研究结果对设计有参考价值。     

新型垂直板规整填料流体力学及传质性能

采用氧解吸实验,在直径190 mm的有机玻璃塔内,液相喷淋密度10～38 m³·m^-2·h^-1,F因子0.2～3.2 m·s^-1·（kg·m^-3）^0.5的实验条件下测定了一种新型垂直板规整填料的流体力学及传质性能。实验结果表明：垂直板填料的操作压降及传质性能均显著优于商业波纹填料。通过与几种经改进的250型波纹填料相比发现,两者泛点F因子整体上相当;在较高液体喷淋密度下,垂直板填料传质性能及压降均高于改进250型波纹填料;在低喷淋密度下,垂直板填料可实现压降低于改进250型波纹填料,而两者传质性能相当。此外,对填料结构改进对其性能的影响进行了单因素考察。     

泡沫碳化硅波纹规整填料骨架结构对其传质性能的影响机理

在?100mm×2000mm的常压精馏塔中使用乙醇-正丙醇作为标准物系，对6种不同骨架结构及表面性质的泡沫碳化硅波纹规整填料（SCFP）的传质性能及操作压降进行了实验测试，探究了结构对填料传质性能的影响。结果表明，6种填料都有着较优秀的传质性能表现，理论板最低可达每米5块。其中，纯质碳化硅型填料的整体传质性能要优于富硅型填料；随着孔隙率的增大，富硅型填料的传质性能有所下降，纯质碳化硅型填料的性能则有所提高；压缩比的增大有利于纯质碳化硅填料的传质性能。在压降表现方面，6种填料的操作压降均随着气相负荷的增大而有所增加，但彼此之间差异不大。同时采用紫外荧光示踪剂方法对单波纹片上液体的流动行为进行了观察，对不同填料表面液体的润湿面积、横向润湿长度进行了对比，结果表明，传质效率表现较高的填料其表面的液体润湿效果更好，有着更大的润湿面积、更长的横向润湿长度。     

液相流动方式对波纹规整填料性能的影响

根据液相在波纹规整填料片上呈现渗流、膜状流等不同的流动方式,选择5种不同的波纹规整填料对其流体力学和传质性能进行研究,以探究液相在波纹片上的流动方式对波纹规整填料性能的影响.研究结果表明,液相呈渗流流动的泡沫碳化硅波纹规整填料(SCFP型)有利于液体横向扩散和液膜均匀分布,当液相喷淋密度和气相F因子均较小时,其压降最低,传质效率最高;液相主要呈渗流流动、兼有膜状流动的双层错孔丝网填料(DMⅢ型)有利于波纹片两侧液体交换,强化液体在流动过程中的扰动,其压降及传质性能略逊于SCFP型填料;液相主要呈膜状流动的BX型、DMⅠ型及DMⅡ型填料波纹片表面液膜较厚,横向扩散能力差,其传质效率低于SCFP型和DMⅢ型填料.研究揭示了依靠渗流作用的波纹规整填料具有较好的应用性能,为波纹规整填料的进一步发展开拓了新思路.     

金属IMPAC—1填料流体力学与传质性能的研究

在内径为５００ｍｍ有机玻璃塔中，以空气，水为物系，对金属ＩＭＰＡＣ－１型填料的流体力学及传质性能进行了实验研究，获得了该填料的几何特性，流体力学及传质性能数据，与ＩＮＴＡＬＯＸＤＧ５０相比，传质性能提高近２０％以上，为方便工业应用，对数据进行了关联。     

QH-1型扁环填料用于高液气比操作时的性能研究

在内径186mm有机玻璃塔中 ,对16和2 5QH 1型扁环填料的流体力学和传质性能进行了研究 ,得出了计算其压降、液泛气速、泛点填料因子、湿填料因子和液相总传质单元高度的关联式。并与16鲍尔环填料进行比较 ,结果表明 ,QH 1具有优良的流体力学和传质特性。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。