Combined effects of 3D bone marrow stem cell-seeded wet-electrospun poly lactic acid scaffolds on full-thickness skin wound healing

Tissue engineering has emerged as an alternative treatment to traditional grafts for skin wound healing. Three-dimensional nanofibers have been used extensively for this purpose due to their excellent biomedical-related properties. In this study, high porous 3D poly lactic acid nanofibrous scaffolds (PLA-S) were prepared by wet-electrospinning technique and seeded with rat bone-marrow stem cells (BMSCs) to characterize the biocompatibility and therapeutic efficacy of these fibers on the treating full-thickness dermal wounds. The results of in vitro andin vivo studies indicate that the 3D fibrous PLA-S can be a potential wound dressing for wound repair, particularly when seeded with BMSCs.     

Preparation and characterization of porous scaffold composite films by blending chitosan and gelatin solutions for skin tissue engineering

Biodegradable polymers have significant potential in biotechnology and bioengineering. However, for some applications, they are limited by their inferior mechanical properties and unsatisfactory compatibility with cells and tissues. In the present investigation blends of chitosan and gelatin with various compositions were produced as candidate materials for biomedical applications. Fourier transform infrared spectral analysis showed good compatibility between these two biodegradable polymers. The composite films showed improved tensile properties, highly porous structure, antimicrobial activities, low water dissolution, low water uptake and high buffer uptake compared to pure chitosan or gelatin films. These enhanced properties could be explained by the introduction of free ? OH, ? NH₂ and ? NHOCOCH₃ groups of the amorphous chitosan in the blends and a network structure through electrostatic interactions between the ammonium ions (? NH³⁺) of the chitosan and the carboxylate ions (? COO^?) of the gelatin. Scanning electron microscopy images of the blend composite films showed homogeneous and smooth surfaces which indicate good miscibility between gelatin and chitosan. The leafy morphologies of the scaffolds indicate a large and homogeneous porous structure, which would cause increased ion diffusion into the gel that could lead to an increase in stability in aqueous solution, buffer and temperature compared to the gelatin/chitosan system. In vivo testing was done in a Wistar rat (Rattus norvegicus) model and the healing efficiencies of the scaffolds containing various compositions of chitosan were measured. The healing efficiencies in Wistar rat of composites with gelatin to chitosan ratios of 10:3 and 10:4 were compared with that of a commercially available scaffold (Eco‐plast). It was observed that, after 5 days of application, the scaffold with a gelatin to chitosan ratio of 10:3 showed 100% healing in the Wistar rat; however, the commercial Eco‐plast showed only a little above 40% healing of the dissected rat wound. Copyright © 2012 Society of Chemical Industry     

A Preliminary Direct Comparison of the Inflammatory Reduction and Growth Factor Production Capabilities of Three Commercially Available Wound Products: Collagen Sheet,Manuka Honey Sheet,and a Novel Bioengineered Collagen Derivative + Manuka Honey + Hydroxyapatite Sheet

Many commercially available wound products focus on improving one stage of the wound healing cascade. While this targeted approach works for specific wounds, there is a need for products that can reliably and comprehensively progress a wound through multiple stages. This preliminary in vitro study was performed to directly compare the inflammatory reduction and growth factor production effects of three commercially available wound care products: a collagen sheet (COL), a Manuka Honey Calcium Alginate sheet (MH), and a novel bioengineered sheet comprised of a collagen derivative (gelatin), Manuka honey, and hydroxyapatite (BCMH). Macrophages and human dermal fibroblasts were directly seeded on all three commercial products, and supernatants were analyzed for inflammatory markers and growth factors, respectively. Comparing the MMP-9/TIMP-1 ratio, BCMH resulted in 11× lower levels of this inflammation biomarker compared to COL, and 3× lower levels compared to MH. Both the COL and BCMH products created an environment conducive to expression and release of relevant growth factors, while the MH product showed the lowest levels of growth factor expression of all three commercially available products tested. The favorable 11× lower MMP-9/TIMP-1 ratio observed with the BCMH product compared to the COL product suggests that the BCMH products provided a superior comprehensive approach to healthy progression of the wounds by providing an additional benefit of reducing the inflammatory response in vitro.     

Stabilizing effect of carbodiimide and dehydrothermal treatment crosslinking on the properties of collagen/hydroxyapatite scaffolds

This paper reports the effect of the combined technique of dehydrothermal treatment (DHT) and a mixture of 1‐ethyl‐3(3‐dimethylaminopropyl) carbodiimide (EDC) and N‐hydroxysuccinimide (NHS) crosslinking on the physicochemical properties of collagen/hydroxyapatite materials. Collagen and collagen/hydroxyapatite porous scaffolds containing different amounts of collagen and hydroxyapatite were prepared with use of the freeze‐drying technique. All samples were capable of absorbing a large quantity of phosphate buffered saline. Samples crosslinked by DHT+EDC/NHS presented higher resistance to collagenase degradation (with slightly reduced degradation in DHT+EDC/NHS crosslinked scaffolds prepared from 2% collagen solution), whereas DHT scaffolds exhibited faster degradation. Mechanical testing results suggested that scaffolds crosslinked by DHT+EDC/NHS treatment have an improved compressive modulus compared with EDC/NHS crosslinking. The qualitative analysis of colour intensity resulting from the CellTiter 96 Aqueous One Solution Cell Proliferation Assay (MTS) led to the conclusion that all samples, regardless of the crosslinking method, were well tolerated by cells. However, DHT and EDC/NHS crosslinked scaffolds seem to support better cell viability, in contrast to DHT+EDC/NHS crosslinked scaffolds that support cell differentiation instead. DHT+EDC/NHS crosslinked scaffolds markedly increase the specific alkaline phosphatase activity of cells, which may be of benefit in bone tissue engineering. © 2017 Society of Chemical Industry     

Novel collagen‐based hydrogels with injectable,self‐healing,wound‐healing properties via a dynamic crosslinking interaction

Collagen‐based hydrogels have gained significant popularity in biomedical applications; however, traditional collagen hydrogels are easily disabled for lack of self‐healing properties due to their non‐reversible bonds. Here, a self‐healing collagen‐based hydrogel has been developed based on dynamic network chemistry, consisting of dynamic imine linkages between collagen and dialdehyde guar gum, as well as diol‐borate ester bonds between guar gum and borax. In addition, macromolecular interactions amongst macromolecules are involved. The above‐mentioned interactions were validated by Fourier transform infrared spectroscopy, sodium dodecyl sulfate polyacrylamide gel electrophoresis and DSC. The as‐prepared collagen‐based hydrogels showed good injectability and rapid self‐healing capacity (within 3 min) as reflected from injection tests, optical microscope observations, rheological measurements, as well as self‐healing studies. In addition, the collagen‐based hydrogels showed accelerated wound‐healing properties. This study offers a facile strategy to endow self‐healing ability on collagen‐based hydrogels without any external stimulus, which show great application potential as wound dressings. © 2020 Society of Chemical Industry     

Characterization and implantation of a novel foamy type of collagen into SD rats to regenerate tissue by slowing down the collagen degradation rate

Collagen has high biocompatibility and biodegradability and therefore is an ideal natural polymer biomaterial for tissue regeneration, such as gel-like and porous collagens. However, the limitation of gel-like collagen is unsuitability for cell/tissue ingrowth and the limitation of porous collagen is quick degradation rate. Here, the authors propose a novel type of foamy collagen to address the previous limitations. Foamy collagen with a closed/nonconnective porous structure was formed using foaming technology and not using toxic crosslinking reagents. This research aimed to investigate the macro-/microstructure, the in vitro/vivo degradation rate, and the tissue regeneration feasibility of foamy collagen. For in vitro degradation rate, porous collagen was completely degraded by enzyme, whereas 91.5% and 72.1% of gel-like and foamy collagens, respectively, remained intact. In vivo degradation rate had a similar trend as in vitro data. After implantation of the collagens in Sprague Dawley rats, immune cells were observed at the periphery of the three types of collagen at day 3. Fibroblast ingrowth was observed in foamy and porous collagen groups at day 7. Neocapillary formation and tissue regeneration were observed in foamy and porous collagen groups at day 14, but nearly none in gel-like collagen group. In conclusion, the authors believe that foamy collagen is promising for application of soft-tissue regeneration.     

Hyaluronan as a Prominent Biomolecule with Numerous Applications in Medicine

Hyaluronan (HA) is a natural glycosaminoglycan present in many tissues of all vertebrates. HA has various biological functions, which are dependent on its molar mass. High-molar-mass HA has anti-angiogenic, immunosuppressive and anti-inflammatory properties, while low-molar-mass HA has opposite effects. HA has also antioxidative properties, however on the other hand it can be readily degraded by reactive oxygen species. For many years it has been used in treatment of osteoarthritis, cosmetics and in ophthalmology. In the last years there has been a growing interest of HA to also be applied in other fields of medicine such as skin wound healing, tissue engineering, dentistry and gene delivery. In this review we summarize information on modes of HA administration, properties and effects of HA in various fields of medicine including recent progress in the investigation of HA.     

Fabrication of polyamide thin film nanocomposite reverse osmosis membrane incorporated with a novel graphite-based carbon material for desalination

The properties of polyamide (PA) thin film composite (TFC) membranes are affected by many variables, especially the additives in the process of interfacial polymerization that play an important role in the properties of membranes. In this study, a new type graphite carbon was added into organic phase containing trimesoyl chloride for interfacial polymerization with aqueous phase containing m-phenylenediamine to prepare modified polyamide thin film nanocomposite (TFN) membranes for reverse osmosis (RO) adhibition. Polysulfone ultrafiltration membranes were used as the carrier of the interfacial polymerization. The concentration of graphite carbon was selected from 0.002 to 0.01 wt%. The polyamide nanocomposite membrane prepared with the concentration of 0.004 wt% graphite carbon showed the best RO desalination performance, which the water flux of this TFN membrane is over 2.3 times as much as pristine TFC membrane, and the salt rejection is over 99%. This article provides a well-performing polyamide thin film nanocomposite membrane modified by a new-type carbon nanoparticles consequently.     

Development and Evaluation of Biomimetic 3D Coated Composite Scaffold for Application as Skin Substitutes

Skin injuries are an urgent health issue, which raises a great concern in the clinic. Although numerous strategies have been proposed to fabricate skin substitutes for treatment of wounds over the past several decades, fabricating an ideal skin substitute to replace the damaged one can still be a problem. In this study, a novel biomimetic 3D composite skin scaffold is fabricated by combining electrohydrodynamic (EHD) jetting, electrospinning, and coating techniques. Here, the first polycaprolactone (PCL) porous structure is produced by the EHD jetting. Next, the second polylactic acid (PLA) membrane consisted of nanoscale fibers is prepared on the PCL porous structure via the electrospinning. The PCL porous structure and PLA fibers membrane can mimic the dermis and epidermis layer, respectively. Furthermore, gelatin is used as coating solution to enhance the biocompatibility of the scaffold. The structure and morphology of the fabricated scaffolds are analyzed, and the mechanical properties are investigated as well. Moreover, the in vitro and in vivo experiments demonstrate the biocompatibility of the materials and the fabrication process. In conclusion, these results demonstrate that the composite scaffold is effective and holds great potential for skin regeneration in the clinic.     

Modification of titanium surface with collagen and doxycycline as a new approach in dental implants

In this work, we investigate for the first time several issues involved in bio-adhesion process for a new type of chemically modified titanium surfaces (in their initial form and after collagen deposition), in order to assess their potential in dental implant surface modification. For this purpose, we studied the following: collagen adhesion, cytotoxicity, osteoblast cytomorphology, cell adhesion and proliferation, doxycycline embedding and modifications in the collagen film deposed on the metal surfaces, drug release from the collagen films. The improvement of adhesion between collagen film and titanium substrate, when hydroxyl and amino functional groups are assisting the surfaces was presented, all materials showing no cytotoxic effects as revealed by lactate dehydrogenase-based assay. The drug release from titanium–coll–doxy systems offers a dual mechanism of the delivery profile (burst release followed by moderate discharge of the antibiotic), with perspectives in soft tissue recovery postoperative stage.     

Fabrication of porous scaffolds with a controllable microstructure and mechanical properties by porogen fusion technique

Macroporous scaffolds with controllable pore structure and mechanical properties were fabricated by a porogen fusion technique. Biodegradable material poly (d, l-lactide) (PDLLA) was used as the scaffold matrix. The effects of porogen size, PDLLA concentration and hydroxyapatite (HA) content on the scaffold morphology, porosity and mechanical properties were investigated. High porosity (90% and above) and highly interconnected structures were easily obtained and the pore size could be adjusted by varying the porogen size. With the increasing porogen size and PDLLA concentration, the porosity of scaffolds decreases, while its mechanical properties increase. The introduction of HA greatly increases the impact on pore structure, mechanical properties and water absorption ability of scaffolds, while it has comparatively little influence on its porosity under low HA contents. These results show that by adjusting processing parameters, scaffolds could afford a controllable pore size, exhibit suitable pore structure and high porosity, as well as good mechanical properties, and may serve as an excellent substrate for bone tissue engineering.     

Preparation of Recombinant Human Collagen III Protein Hydrogels with Sustained Release of Extracellular Vesicles for Skin Wound Healing

Existing treatment methods encounter difficulties in effectively promoting skin wound healing, making this a serious challenge for clinical treatment. Extracellular vesicles (EVs) secreted by stem cells have been proven to contribute to the regeneration and repair of wound tissue, but they cannot be targeted and sustained, which seriously limits their current therapeutic potential. The recombinant human collagen III protein (rhCol III) has the advantages of good water solubility, an absence of hidden viral dangers, a low rejection rate and a stable production process. In order to achieve a site-specific sustained release of EVs, we prepared a rhCol III hydrogel by cross-linking with transglutaminase (TGase) from Streptomyces mobaraensis, which has a uniform pore size and good biocompatibility. The release profile of the rhCol III-EVs hydrogel confirmed that the rhCol III hydrogel could slowly release EVs into the external environment. Herein, the rhCol III-EVs hydrogel effectively promoted macrophage changing from type M1 to type M2, the migration ability of L929 cells and the angiogenesis of human umbilical vein endothelial cells (HUVECs). Furthermore, the rhCol III-EVs hydrogel is shown to promote wound healing by inhibiting the inflammatory response and promoting cell proliferation and angiogenesis in a diabetic rat skin injury model. The reported results indicate that the rhCol III-EVs hydrogel could be used as a new biological material for EV delivery, and has a significant application value in skin wound healing.     

Antioxidant,antifungal, water binding,and mechanical properties of poly(vinyl alcohol) film incorporated with essential oil as a potential wound dressing material

In this study, the properties of poly (vinyl alcohol) (PVA) films incorporated with Zataria multiflora essential oil (ZMO) as a potential antioxidant/antibacterial material was investigated. PVA films were prepared from PVA solutions (2% w/v) containing different concentrations of ZMO. Water solubility, moisture absorption, water swelling, and water vapor permeability for pure PVA films were 57 ± 1.1, 99 ± 3.2%, 337 ± 8%, and 0.453 ± 0.015 g mm/m² h, respectively. Incorporation of ZMO into PVA films caused a significant decrease in water swelling and moisture absorption and increase in solubility and water vapor permeability. Tensile strength, elastic modulus, and elongation at break for pure PVA films were 13.5 ± 0.61 MPa, 15.2 ± 0.8 MPa, and 216 ± 4%, respectively. Incorporation of ZMO into the PVA films caused a significant decrease in tensile strength and elastic modulus and increase in elongation at break of the films. Pure PVA film showed UV‐visible light absorbance ranging from 280 to 440 nm with maximum absorbance at 320 nm. Addition of ZMO caused a significant increase in light absorbance and opacity. PVA films exhibited no antioxidant and antifungal activities, whereas PVA/ZMO films exhibited excellent antioxidant and antifungal properties. Although the bioactivity PVA films were improved by the addition of ZMO, however, the mechanical properties and water binding capacity of the films were weaken slightly. Thus, ZMO emulsified in the ethanol not compatible with PVA matrix and more suitable emulsifier was needed in order to obtain strong film with higher mechanical properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40937.     

Lactosamine‐Based Derivatives as Tools to Delineate the Biological Functions of Galectins: Application to Skin Tissue Repair

Galectins have been recognized as potential novel therapeutic targets for the numerous fundamental biological processes in which they are involved. Galectins are key players in homeostasis, and as such their expression and function are finely tuned in vivo. Thus, their modes of action are complex and remain largely unexplored, partly because of the lack of dedicated tools. We thus designed galectin inhibitors from a lactosamine core, functionalized at key C2 and C3′ positions by aromatic substituents to ensure both high affinity and selectivity, and equipped with a spacer that can be modified on demand to further modulate their physico‐chemical properties. As a proof‐of‐concept, galectin‐3 was selectively targeted. The efficacy of the synthesized di‐aromatic lactosamine tools was shown in cellular assays to modulate collective epithelial cell migration and to interfere with actin/cortactin localization.     

Fabrication and characterization of a wound dressing composed of polyvinyl alcohol/nanochitosan/Artemisia ciniformis extract: An RSM study

This study reported the fabrication and characterization of an electrospun wound dressing composed of polyvinyl alcohol (PVA), nanochitosan (NC), and Artemisia ciniformis extract (AE). NC and AE wt% were defined as process parameters, and their effects on the diameter, mechanical properties, and cell attachment of the fibers were investigated using the Design Expert 7.0 software. The software provided quadratic equations, which were investigated statistically and graphically, confirmed that with the increase in the NC portion in the samples, the mechanical strength and fiber diameter increased. The increase is probably due to the proper dispersion of nanoparticle into a PVA matrix and the increased viscosity of the solution; however, cell viability showed an increasing/decreasing trend. The presence of AE lowered the mechanical properties of the samples while positively affecting cell viability. Furthermore, the samples had significant antibacterial properties against Escherichia coli as Gram-negative bacteria and Staphylococcus aureus as Gram-positive one, a notable property for wound dressings. Overall, our findings showed that PVA/NC/AE has an excellent potential for use in biomedical fields, particularly as a wound dressing.     

Development of a Novel Polygalacturonic Acid-Gelatin Blend Scaffold Fabrication and Biocompatibility Studies for Tissue-Engineering Applications

In this study, we report the enhanced osteoblast differentiation of mouse embryonic stem cell (mESC) on a novel polygalacturonic acid (PGA)/gelatin scaffold. The matrices of various PGA/geletin ratios were fabricated, biophysically characterized, and optimized for cell culture applications. Blended 2% PGA/gelatin scaffolds were highly porous and were robust with enhanced mechanical strength. Swelling studies showed they had high swelling capacity (six-fold higher than only gelatin scaffold) along with complete degradation in the presence of phosphate-buffered saline. Cytocompatibility of the matrices was evaluated using mouse fibroblast 3T3-L1 cell line showing normal spreading and proliferation as assessed by scanning electron microscopy (SEM) and MTT assay. Among different blends of PGA/gelatin, 2% PGA/gelatin (2PG) scaffold showed the optimum physical and biological compatibility for use in cell culture and differentiation of mESC, especially for osteoblast differentiation. The scaffold, as reported in this study, presents a promising tool for tissue engineering applications.     

Characterization of a novel bioactive poly[(lactic acid)‐co‐(glycolic acid)] and collagen hybrid matrix for dermal regeneration

Different strategies have been explored for the purpose of autologous or allogeneic dermal regeneration. We have developed a hybrid matrix by lyophilizing collagen within a poly[(lactic acid)‐co‐(glycolic acid)] (10:90, molar composition) knitted mesh, in order to assimilate the advantages of natural and synthetic materials. The porosity of the mesh was found to be almost 95 %, using Micro‐Computed Tomography Analysis, while the mechanical properties were comparable to native skin. In vitro biocompatibility was analyzed by culturing rat dermal fibroblasts in the matrices over 10 days. The cells were able to attach, proliferate and remain viable within the hybrid matrices. Subsequently, in vivo biocompatibility was analyzed by implanting the matrices subcutaneously in immunocompetent rats, for 2 weeks. Histological analysis showed that the poly[(lactic acid)‐co‐(glycolic acid)]–collagen hybrid matrices evoked minimal host tissue response in vivo. This study forms the basis of using poly[(lactic acid)‐co‐(glycolic acid)]–collagen hybrid matrices for our future work to develop a bioactive matrix for dermal regeneration. Copyright © 2005 Society of Chemical Industry     

Fabrication of porous three‐dimensional fibroin structures through a freezing process

Silk fibroin has been investigated for various biomedical applications. In this research, through a green process, without using freeze‐drying, which is energy consuming during a single step process that is completely aqueous‐based, without using any additional materials during or after structure formation, water‐insoluble silk fibroin sponges have been obtained; these achieved only through keeping fibroin solutions frozen at a suitable temperature for a sufficient time. The effect of solution concentration and freezing conditions on the pore morphology and size, microstructure, and mechanical properties was investigated. A discussion has been proposed for the formation of structures. The average measured pore sizes were approximately from 4 to 77 μm. Elastic modules of the investigated structures varied from about 100 to 900 kPa. Cyclic mechanical tests were performed; the remaining strain of the structures reached to about 1%. A less considered issue which can be considered as the possible significant change of the mechanical behavior of as‐prepared samples after one or more times of loading and unloading should be noted. The used method in this study as a cost effective and convenient procedure could have the potential for application in the production of porous structures for biomedical applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46537.     

Developing Wound Dressings Using 2-deoxy-D-Ribose to Induce Angiogenesis as a Backdoor Route for Stimulating the Production of Vascular Endothelial Growth Factor

2-deoxy-D-Ribose (2dDR) was first identified in 1930 in the structure of DNA and discovered as a degradation product of it later when the enzyme thymidine phosphorylase breaks down thymidine into thymine. In 2017, our research group explored the development of wound dressings based on the delivery of this sugar to induce angiogenesis in chronic wounds. In this review, we will survey the small volume of conflicting literature on this and related sugars, some of which are reported to be anti-angiogenic. We review the evidence of 2dDR having the ability to stimulate a range of pro-angiogenic activities in vitro and in a chick pro-angiogenic bioassay and to stimulate new blood vessel formation and wound healing in normal and diabetic rat models. The biological actions of 2dDR were found to be 80 to 100% as effective as VEGF in addition to upregulating the production of VEGF. We then demonstrated the uptake and delivery of the sugar from a range of experimental and commercial dressings. In conclusion, its pro-angiogenic properties combined with its improved stability on storage compared to VEGF, its low cost, and ease of incorporation into a range of established wound dressings make 2dDR an attractive alternative to VEGF for wound dressing development.