Using of cotton oil soapstock biodiesel–diesel fuel blends as an alternative diesel fuel

In this study, usability of cotton oil soapstock biodiesel–diesel fuel blends as an alternative fuel for diesel engines were studied. Biodiesel was produced by reacting cotton oil soapstock with methyl alcohol at determined optimum condition. The cotton oil biodiesel–diesel fuel blends were tested in a single cylinder direct injection diesel engine. Engine performances and smoke value were measured at full load condition. Torque and power output of the engine with cotton oil soapstock biodiesel–diesel fuel blends decreased by 5.8% and 6.2%, respectively. Specific fuel consumption of engine with cotton oil soapstock–diesel fuel blends increased up to 10.5%. At maximum torque speeds, smoke level of engine with blend fuels decreased up to 46.6%, depending on the amount of biodiesel. These results were compared with diesel fuel values.     

The effect of biodiesel and bioethanol blended diesel fuel on nanoparticles and exhaust emissions from CRDI diesel engine

Biofuel (biodiesel, bioethanol) is considered one of the most promising alternative fuels to petrol fuels. The objective of the work is to study the characteristics of the particle size distribution, the reaction characteristics of nanoparticles on the catalyst, and the exhaust emission characteristics when a common rail direct injection (CRDI) diesel engine is run on biofuel-blended diesel fuels. In this study, the engine performance, emission characteristics, and particle size distribution of a CRDI diesel engine that was equipped with a warm-up catalytic converters (WCC) or a catalyzed particulate filter (CPF) were examined in an ECE (Economic Commission Europe) R49 test and a European stationary cycle (ESC) test. The engine performance under a biofuel-blended diesel fuel was similar to that under D100 fuel, and the high fuel consumption was due to the lowered calorific value that ensued from mixing with biofuels. The use of a biodiesel–diesel blend fuel reduced the total hydrocarbon (THC) and carbon monoxide (CO) emissions but increased nitrogen oxide (NO_x) emissions due to the increased oxygen content in the fuel. The smoke emission was reduced by 50% with the use of the bioethanol–diesel blend. Emission conversion efficiencies in the WCC and CPF under biofuel-blended diesel fuels were similar to those under D100 fuel. The use of biofuel-blended diesel fuel reduced the total number of particles emitted from the engine; however, the use of biodiesel–diesel blends resulted in more emissions of particles that were smaller than 50 nm, when compared with the use of D100. The use of a mixed fuel of biodiesel and bioethanol (BD15E5) was much more effective for the reduction of the particle number and particle mass, when compared to the use of BD20 fuel.     

降低酸化油生物柴油NOx和烟度排放的试验研究

本文主要针对降低柴油机燃用酸化油生物柴油及其混合燃料的NOx、烟度排放的方法进行了试验研究。采用乙醇/生物柴油混合燃料法和推迟供油提前角两种方法在R4105T型柴油机上进行了试验。结果表明,在不影响动力性前提下燃用添加5%的乙醇的混合柴油,NOx及碳烟的排放均有明显下降。推迟供油提前角能有效的降低NOx的排放,但碳烟排放量增加,功率下降,燃料经济性变差。     

Impact of alternative fuel properties on fuel spray behavior and atomization

In order to verify and solve the problem of NOx and PM emissions, it is necessary to directly observe the internal combustion chamber of a diesel engine. Many studies have been performed in recent years to verify the macroscopic and microscopic behavior of the injected fuel spray because observing it is not easy due to the difficulties of the experiment. Researchers have investigated the spray characteristics for various diesel injector nozzles over a wide range of temperatures and pressure, but there is lack of evaluation for the spray characteristics for biodiesel. At a time when rapid rise of fuel prices and depleting hydrocarbon resources of the world have forced us to look for alternative fuels biodiesel produced by transesterification of non-edible vegetable oils is promising to be an important additive/substitute to petro diesel. Biodiesel being an oxygenated and sulfur-free fuel leads to more complete combustion and lower emissions. But, the energy content or net calorific value of biodiesel is less than that of diesel fuel; also it has higher viscosity and density, than diesel fuel. A considerable improvement in these properties can be obtained by mixing diesel and biodiesel and then using the blends. Biodiesel and biodiesel/petro diesel blends, with their higher lubricity levels, are increasingly being utilized as an alternative. Present paper analyzed the correlation of injection parameters that will affect the spray characteristics of biodiesel. Observations for analyzing the effect of injection parameters on spray cone angle, break up length and fuel penetration were made. Finally the performance and emissions tests were studied. Atomization and vaporization of fuel are greatly influenced by viscosity and density of fuel and these properties are temperature dependent. Thus fuel inlet temperature plays a very important role in fuel atomization process. At higher temperature viscosity of fuel decreases which enhances the atomization of biofuels.     

Experimental study on spray characteristics of ethanol-aviation kerosene blended fuel with a high-pressure common rail injection system

Partial replacement of fossil fuels by biomass based alternative fuels is considered as a possible option toward sustainability in aviation applications. The present work aims to study the changes in the spray characteristics in a pressure vessel when operated with aviation kerosene and ethanol-aviation kerosene blended fuel in a high-pressure common rail injection system. This research proposes the concept of adding a certain percentage of ethanol to aviation kerosene, creating ethanol-aviation kerosene blended fuel, which can decrease our reliance on fossil fuels on some level. The spray characteristics of the blended fuel, like spray tip penetration, spray cone angle and spray area, are studied in our work. Through the analysis, we can find that the atomization conditions have a significant impact on the spray characteristics of the aviation kerosene. Similarly, the experimental results show that the addition of ethanol has certain effect on the spray characteristics of the aviation kerosene. And the empirical equations applied in this study to predicting spray tip penetration and spray tip velocity provide a good agreement with the experimental data in the error-allowed range.     

Combustion performance and emission reduction characteristics of automotive DME engine system

This article is a condensed overview of a dimethyl ether (DME) fuel application for a compression ignition diesel engine. In this review article, the spray, atomization, combustion and exhaust emissions characteristics from a DME-fueled engine are described, as well as the fundamental fuel properties including the vapor pressure, kinematic viscosity, cetane number, and the bulk modulus. DME fuel exists as gas phase at atmospheric state and it must be pressurized to supply the liquid DME to fuel injection system. In addition, DME-fueled engine needs the modification of fuel supply and injection system because the low viscosity of DME caused the leakage. Different fuel properties such as low density, viscosity and higher vapor pressure compared to diesel fuel induced the shorter spray tip penetration, wider cone angle, and smaller droplet size than diesel fuel. The ignition of DME fuel in combustion chamber starts in advance compared to diesel or biodiesel fueled compression ignition engine due to higher cetane number than diesel and biodiesel fuels. In addition, DME combustion is soot-free since it has no carbon–carbon bonds, and has lower HC and CO emissions than that of diesel combustion. The NO_x emission from DME-fueled combustion can be reduced by the application of EGR (exhaust gas recirculation). This article also describes various technologies to reduce NO_x emission from DME-fueled engines, such as the multiple injection strategy and premixed combustion. Finally, the development trends of DME-fueled vehicle are described with various experimental results and discussion for fuel properties, spray atomization characteristics, combustion performance, and exhaust emissions characteristics of DME fuel.     

Study on combustion characteristics and particulate emissions of a common-rail diesel engine fueled with n-butanol and waste cooking oil blends

Biodiesel is a promising alternative fuel because of its renewability and extensive source of raw materials. Butanol can be blended in biodiesel to reduce the kinematic viscosity and promote the fuel atomization. In this respect, biodiesel was blended with 10% and 20% n-butanol, and the combustion characteristics and particulate emissions of the fuel blends were tested in a turbocharged, 6-cylinder, common rail diesel engine at a constant speed of 1400 rpm under seven engine loads. The experimental results show that under various engine loads, all of the butanol and biodiesel fuel blends provide faster combustion than diesel due to the higher oxygen content of n-butanol and the lower cetane number of butanol which results in stronger premixed combustion. The addition of butanol is beneficial to concentrating the heat release and thus shorten the combustion duration. With an increased proportion of butanol, soot emissions of butanol and biodiesel fuel blends decrease, the number concentration and volume concentration of ultrafine particles (UFPs) reduce noticeably. Meanwhile, the geometric mean diameters of UFPs decrease with an increase in butanol. With an increase of the engine loads, the number concentration peaks of UFPs gradually transfer from the size range of nucleation mode particles (NMPs) to the size range of accumulation mode particles (AMPs) due to the elevated combustion temperatures and high equivalence ratios. Moreover, biodiesel and fuel blends exhibit a higher percentage of NMPs as compared to diesel because of the fuel-bound oxygen, zero aromatics, and low sulfides.     

掺混燃油在离心喷嘴内的流动与雾化特性研究

燃料性质的改变会导致雾化特性的变化,针对乙醇掺混航空煤油在离心式压力雾化喷嘴内的流动与雾化特性开展了研究。通过耦合流体体积法(VOF)和离散相模型(DPM),研究了不同乙醇掺混体积分数下掺混燃油在离心式喷嘴中的内部流动和外部雾化过程。研究结果表明：在压差不变时,喷嘴内空气芯直径随着掺混燃油内乙醇体积分数的增加而增大;而液膜厚度则与空气芯直径成反比,随着乙醇体积分数的增加而减小。喷嘴出口的速度随着乙醇体积分数的增加而增大;在油膜表面的波动及气动力的共同作用下,油膜失稳形成液滴,获得了不同比例下掺混燃油在喷雾外流场内的喷雾粒径分布特征,随着掺混乙醇体积分数的增加,液滴的平均直径逐渐减小。     

Physico-chemical properties of ethanol–diesel blend fuel and its effect on performance and emissions of diesel engines

The effects of different ethanol–diesel blended fuels on the performance and emissions of diesel engines have been evaluated experimentally and compared in this paper. The purpose of this project is to find the optimum percentage of ethanol that gives simultaneously better performance and lower emissions. The experiments were conducted on a water-cooled single-cylinder Direct Injection (DI) diesel engine using 0% (neat diesel fuel), 5% (E5–D), 10% (E10–D), 15% (E15–D), and 20% (E20–D) ethanol–diesel blended fuels. With the same rated power for different blended fuels and pure diesel fuel, the engine performance parameters (including power, torque, fuel consumption, and exhaust temperature) and exhaust emissions [Bosch smoke number, CO, NO_x, total hydrocarbon (THC)] were measured. The results indicate that: the brake specific fuel consumption and brake thermal efficiency increased with an increase of ethanol contents in the blended fuel at overall operating conditions; smoke emissions decreased with ethanol–diesel blended fuel, especially with E10–D and E15–D. CO and NO_x emissions reduced for ethanol–diesel blends, but THC increased significantly when compared to neat diesel fuel.     

Improving the low temperature properties of biodiesel fuel

The use of biodiesel as a diesel fuel extender and lubricity improver is rapidly increasing. While most of the properties of biodiesel are comparable to petroleum based diesel fuel, improvement of its low temperature flow characteristic still remains one of the major challenges when using biodiesel as an alternative fuel for diesel engines. The biodiesel fuels derived from fats or oils with significant amounts of saturated fatty compounds will display higher cloud points and pour points. This paper is aimed to investigate the cold flow properties of 100% biodiesel fuel obtained from Madhuca indica, one of the important species in the Indian context. In this paper, the cold flow properties of biodiesel were evaluated with and without pour point depressants towards the objectives of identifying the pumping and injecting of these biodiesel in CI engines under cold climates. Effect of ethanol, kerosene and commercial additive on cold flow behavior of this biodiesel was studied. A considerable reduction in pour point has been noticed by using these cold flow improvers. The performance and emission with ethanol blended Mahua biodiesel fuel and ethanol–diesel blended Mahua biodiesel fuel have also been studied. A considerable reduction in emission was obtained. Ethanol blended biodiesel is totally a renewable, viable alternative fuel for improved cold flow behavior and better emission characteristics without affecting the engine performance.     

Production characterization and efficiency of biodiesel: a review

Vegetable oil is one of the main first generation liquid biofuels. The fuel characteristics of vegetable oil such as viscosity and atomization cannot be accommodated by existing diesel engines. An alternate process has been developed to improve the fuel characteristics of vegetable oils through the process of alcoholysis to produce a fuel called biodiesel. It can be used in engines as substitute for fossil fuel. This paper reviews the characteristics of different oils available for biodiesel production and the production technologies, engine performance using vegetable oil and biodiesel, and emission studies. Copyright © 2014 John Wiley & Sons, Ltd.     

Measurements and correlations of physico-chemical properties to composition of pseudo-binary mixtures with biodiesel

Biodiesel + diesel fuel mixtures are commonly used in the last years especially in the transport area, in order to reduce environment pollution, and the dependency on the imported fossil fuels. Some of the basic properties of these mixtures, especially density and viscosity, strongly influence spray properties, atomization and combustion processes, engine deposits formation, engine behavior in cold weather conditions, being used as input data for predictive engine combustion models. In this study pseudo-binary biodiesel + diesel fuel and biodiesel + benzene mixtures were prepared and densities, viscosities, and refractive indices of mixtures were measured at 298.15 K. The accuracy of different mixing rules and empirical equations used to estimate these properties was evaluated. The density of the studied mixtures can be predicted with a very good accuracy using Kay’s mixing rule or empirical equations obtained from regression analysis. The viscosity of biodiesel + petroleum diesel fuel can be predicted with a very good accuracy using the empirical equations. The viscosities of the two types of biodiesel mixtures are predicted with lower accuracy using Grunberg–Nissan modified equation or one equation developed for petroleum fractions. Density-refractive index and viscosity-refractive index correlations have been developed.     

Mechanistic study on spraying of blended biodiesel using phase Doppler anemometry

Droplet size and dynamics of blended palm oil-based fatty acid methyl ester (FAME) and diesel oil spray were mechanistically investigated using a phase Doppler anemometry. A two-fluid atomizer was applied for dispersing viscous blends of blended biodiesel oil with designated flow rates. It was experimentally found that the atomizer could generate a spray with large droplets with Sauter mean diameters of ca. 30 μm at low air injection pressure. Such large droplets traveled with a low velocity along their trajectory after emerging from the nozzle tip. The viscosity of blended biodiesel could significantly affect the atomizing process, resulting in the controlled droplet size distribution. Blended biodiesel with a certain fraction of palm oil-based FAME would be consistently atomized owing to its low viscosity. However, the viscosity could exert only a small effect on the droplet velocity profile with the air injection pressure higher than 0.2 MPa.     

Progress in biodiesel processing

Biodiesel is a notable alternative to the widely used petroleum-derived diesel fuel since it can be generated by domestic natural sources such as soybeans, rapeseeds, coconuts, and even recycled cooking oil, and thus reduces dependence on diminishing petroleum fuel from foreign sources. The injection and atomization characteristics of the vegetable oils are significantly different than those of petroleum-derived diesel fuels, mainly as the result of their high viscosities. Modern diesel engines have fuel-injection system that is sensitive to viscosity change. One way to avoid these problems is to reduce fuel viscosity of vegetable oil in order to improve its performance. The conversion of vegetable oils into biodiesel is an effective way to overcome all the problems associated with the vegetable oils. Dilution, micro-emulsification, pyrolysis, and transesterification are the four techniques applied to solve the problems encountered with the high fuel viscosity. Transesterification is the most common method and leads to monoalkyl esters of vegetable oils and fats, now called biodiesel when used for fuel purposes. The methyl ester produced by transesterification of vegetable oil has a high cetane number, low viscosity and improved heating value compared to those of pure vegetable oil which results in shorter ignition delay and longer combustion duration and hence low particulate emissions.     

Exhaust emission study on neat biodiesel and alcohol blends fueled diesel engine

In this study, neat biodiesel with octanol additive was employed in a diesel engine and its effects on engine emission were studied. The five fuels evaluated were neat palm kernal oil biodiesel, octanol blended with biodiesel by 10%, 20%, and 30% volume, and diesel. All the emissions are reduced by the addition of octanol in biodiesel in all loads owing to the higher oxygen concentration of air/fuel mixtures and improved atomization. Hence, it is concluded that the neat biodiesel and octanol blends can be employed as an alternative fuel for existing unmodified diesel engines owing to its lesser emission characteristics.     

Spray properties of alternative fuels: A comparative analysis of biodiesel and diesel

Physical properties of biodiesel play an important role in the injection, atomization and combustion performance. An experiment was carried out to investigate the spray properties of biodiesel. The experimental setup was based on an electronic unit‐pump (EUP) bench, a constant volume chamber and a high‐speed digital camera. The photographs of spray were dealt with by using an image processing procedure. Then the spray tip penetrations and cone angles were obtained and analyzed. The experimental results indicate that the spray tip penetrations and cone angles of biodiesel increase with increasing injection duration. In addition, with decreasing ambient pressure the spray tip penetrations increase while the cone angles decrease. Furthermore, ambient pressure has a stronger effect on the spray properties of biodiesel than injection pressure. On the macroscopically view, the shape of biodiesel spray is similar to that of diesel. The final tip penetrations and cone angles of biodiesel are greater than those of diesel due to its higher viscosity, density and bulk modulus. Copyright © 2008 John Wiley & Sons, Ltd.     

Assessment of energy performance and air pollutant emissions in a diesel engine generator fueled with water-containing ethanol–biodiesel–diesel blend of fuels

Biomass based oxygenated fuels have been identified as possible replacement of fossil fuel due to pollutant emission reduction and decrease in over-reliance on fossil fuel energy. In this study, 4 v% water-containing ethanol was mixed with (65–90%) diesel using (5–30%) biodiesel (BD) and 1 v% butanol as stabilizer and co-solvent respectively. The fuels were tested against those of biodiesel–diesel fuel blends to investigate the effect of addition of water-containing ethanol for their energy efficiencies and pollutant emissions in a diesel-fueled engine generator. Experimental results indicated that the fuel blend mix containing 4 v% of water-containing ethanol, 1 v% butanol and 5–30 v% of biodiesel yielded stable blends after 30 days standing. BD1041 blend of fuel, which composed of 10 v% biodiesel, 4 v% of water-containing ethanol and 1 v% butanol demonstrated −0.45 to 1.6% increase in brake-specific fuel consumption (BSFC, mL kW⁻¹ h⁻¹) as compared to conventional diesel. The better engine performance of BD1041 was as a result of complete combustion, and lower reaction temperature based on the water cooling effect, which reduced emissions to 2.8–6.0% for NO_x, 12.6–23.7% particulate matter (PM), 20.4–23.8% total polycyclic aromatic hydrocarbons (PAHs), and 30.8–42.9% total BaPeq between idle mode and 3.2 kW power output of the diesel engine generator. The study indicated that blending diesel with water-containing ethanol could achieve the goal of more green sustainability.     

大豆生物柴油混合燃料性能试验研究

通过在R4105T柴油机上进行对比试验,分析了0#柴油／生物柴油、乙醇／生物柴油混合燃料以不同比例掺混时对柴油机动力性、经济性及碳烟排放特性的影响。研究结果表明：柴油机使用0#柴油／生物柴油混合燃料时动力性、碳烟排放量均有所下降,油耗率稍有上升;使用乙醇／生物柴油混合燃料时,碳烟排放量低于生物柴油,动力性、经济性随乙醇含量的不同而呈现不同的变化趋势。     

Evaluation of fuel consumption and vibration characteristic of a compression ignition engine fuelled with high viscosity biodiesel and hydrogen addition

Viscosity property of a fuel is a crucial point for internal combustion engine characteristics. Performance and emission parameters as well as injector's life of an engine is primarily effected by viscosity of the fuels. In present study, effect of high viscosity biodiesel fuels with hydrogen addition was investigated in a compression ignition engine. Biodiesels that are produced from Pongamia Pinnata and Tung oils were used as pure biodiesels as well as blended with low sulphur diesel fuel at the volume ratios of 50% and 75%. Furthermore, hydrogen gas was injected into intake manifold in order to evaluate its effect with the usage of high viscous liquid fuels. The results revealed that brake specific fuel consumption was increased with biodiesel fuels, whereas hydrogen addition into intake manifold improved the consumption. Total vibration acceleration of the engine reduced with biodiesel and hydrogen additions. Frequency spectrum indicated that this decrement was primarily lowered due to less energy transmitted through engine pistons that converted from chemical energy of fuels.     

A computational study on the combustion of hydrogen/methane blended fuels for a micro gas turbines

To understand the combustion performance of using hydrogen/methane blended fuels for a micro gas turbine that was originally designed as a natural gas fueled engine, the combustion characteristics of a can combustor has been modeled and the effects of hydrogen addition were investigated. The simulations were performed with three-dimensional compressible k-ε turbulent flow model and presumed probability density function for chemical reaction. The combustion and emission characteristics with a variable volumetric fraction of hydrogen from 0% to 90% were studied. As hydrogen is substituted for methane at a fixed fuel injection velocity, the flame temperatures become higher, but lower fuel flow rate and heat input at higher hydrogen substitution percentages cause a power shortage. To apply the blended fuels at a constant fuel flow rate, the flame temperatures are increased with increasing hydrogen percentages. This will benefit the performance of gas turbine, but the cooling and the NO_x emissions are the primary concerns. While fixing a certain heat input to the engine with blended fuels, wider but shorter flames at higher hydrogen percentages are found, but the substantial increase of CO emission indicates a decrease in combustion efficiency. Further modifications including fuel injection and cooling strategies are needed for the micro gas turbine engine with hydrogen/methane blended fuel as an alternative.