共查询到20条相似文献,搜索用时 62 毫秒
1.
介绍了等静压成型对粉料的要求,并介绍了制取粉料建议控制的工艺参数,对喷雾干燥过程工艺参数的选择做了详细的说明。 相似文献
2.
在水平钢化玻璃生产中,各种工艺参数的合理设置和准确控制决定了产品的产、质量,而合理设置涉及到参数设定时否方便,也就是人机界面是否友好,准确控制在软件方面来说,则取决于如何将已确定的控制方案实施。本文介绍了作者在这方面的一些体会。 相似文献
3.
介绍了16dtex/5f绵纶66弹力丝的生产设备,所用原料及工艺参数,着重介绍了纺丝工艺及后控制拉伸加弹工艺的控制。 相似文献
4.
对ITCC系统及其各项调控功能进行了介绍,重点介绍了该系统的调速控制、喘振控制的方法及参数控制。结合该系统在河南龙宇煤化工公司实际使用中遇到的软、硬件问题进行了分析和探讨。 相似文献
5.
6.
7.
8.
PLC在塑料挤出机温度控制系统中的应用 总被引:9,自引:0,他引:9
介绍了SIMATIC S7-300可编程控制器在塑料挤出机温度控制系统中的应用,控制回路采用PID参数自整定和脉宽调功法,控制系统把传统的PID控制和PLC的逻辑判断指令结合起来,使PID控制更为灵活,能满足生产过程的要求。详细描述了系统的工作原理和PLC的硬件组成、软件编制,简单介绍了上位机的组态软件WinCC。 相似文献
9.
10.
11.
流量是工业生产中一种常见的测量对象,但由于流量计的类型繁多,对设计选型造成了困扰.介绍了工业控制中常用到的几种流量计类型,讨论了其测量原理及主要特点.针对工业生产的不同应用要求,总结了流量计的选型方法和要点. 相似文献
12.
Kurt E. Häggblom 《Computers & Chemical Engineering》1997,21(12):1441-1449
It is known that control structure selection based on the relative gain array (RGA) may be unreliable for systems larger than 2 × 2. To obtain useful information by the RGA, it is often advantageous, or even necessary, to consider the system with some control loops closed. In distillation, it is necessary to close the inventory control loops. In the paper, analytical relationships useful for frequency-dependent relative gain analysis of distillation control structures are developed. An expression that relates the RGA for an arbitrary control structure to the transfer functions for the so-called LV-structure is derived. Relationships that directly relate the relative gains for different control structures to one another are also derived. The usefulness of the relationships is illustrated by calculation of frequency-dependent relative gains for nine different control structures for a distillation column. Based on these relative gains, the most promising control structures can be selected for further study. 相似文献
13.
14.
15.
16.
17.
在污水处理工艺过程中,怎样正确,合理,经济地选择流量仪表,直接影响整个工程的自控水平,工程造价,流量检测点不同,被测介质的成分不同,所选用的流量计的类型也不同,本文从技术和经济两个方面入手,对几种流量计的性能,价格进行比较,希望能对自控系统设计人员有所帮助。 相似文献
18.
利用升流管式A/O反应器(Up-Flotv Tube Reactor,UFTR)进行了生物除磷的试验研究,并与SBR的效果进行了对比分析。该系统稳定运行三个月的结果表明,对COD、P0^3-4一-P和TP的去除率分别达96%、99%和98%以上,优于SBR的处理效果。流态试验表明UFTR反应器的螺旋流动特征使其接近于活塞流反应器,有利于在空间上形成有机物的梯度分布。而且UFTR反应器所形成的微生物生态系统更稳定,污泥指数较低,污泥的稳定性较好。另外还发现:好氧柱内的D0过高或过低对吸磷都不利,为获得较好的除磷效果,应对好氧柱的D0进行适时监测和控制,使D0在2~3mg/L之间。 相似文献
19.
分析了圆形喷嘴形成的射流夹带流的特性,建立了柱坐标系及控制体,并利用流体的连续性方程给出了夹带流流量的公式,而且将计算结果与前人的试验结果进行数值模拟和比较验证。 相似文献
20.
The RAFT (Reversible Addition-Fragmentation Chain Transfer) process greatly enhances the control over radical polymerisations, while leaving behind a thiocarbonylthio end-group. Thermolysis presents a convenient and efficient way of removing the thiocarbonylthio end-group from RAFT polymers, without the use of additional reagents. This paper describes a simple two-step flow process for the synthesis of RAFT polymers followed by the subsequent removal of the RAFT end-group via thermolysis, without the need for isolating intermediates. A range of different polymers based on styrene, acrylates, methacrylates and acrylamides were synthesised with different RAFT agents and successfully tested for thermolysis at temperatures between 220 and 250 °C in a stainless steel tube flow reactor, resulting in complete removal of thiocarbonylthio end-groups. 相似文献