Preparation and properties of epoxy/phenol formaldehyde novolac/hexakis(methoxymethyl)melamine hybrid resins from in situ polymerization

Based on the self‐condensation of hexakis(methoxymethyl)melamine (HMMM), the condensation between HMMM and phenol formaldehyde novolac resin (n‐PF), and the addition reaction of diglycidyl ether of biphenyl A (DGEBA) and n‐PF, a homogeneous, transparent hybrid thermoset was prepared via in situ polymerization of DGEBA, n‐PF, and HMMM. No phase separations were observed even for the DGEBA/n‐PF/HMMM hybrid thermoset containing 40 wt % HMMM. These hybrid thermosets had high glass‐transition temperatures (98–127°C from differential scanning calorimetry and 111–138°C from dynamic mechanical analysis), excellent thermal stability with high 5 wt % decomposition temperatures (>322°C), high char yields (>24 wt %), and improved flame retardancy with high limited oxygen indices (>28.5). The excellent overall properties of these hybrid resins may lead to their applications in high‐performance “green” electronic products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Phenol–urea–formaldehyde resin co-polymer synthesis and its influence on Elaeis palm trunk plywood mechanical performance evaluated by 13C NMR and MALDI-TOF mass spectrometry

This study evaluated a new method of producing phenol–urea–formaldehyde (PUF) adhesives formulated differently under actual “in-situ” resin synthesis conditions. This was carried out by co-polymerizing urea formaldehyde (UF) resin with phenol–formaldehyde resin in the core layer of low molecular weight (LMW) phenol–formaldehyde (PF) resin treated Elaeis palm trunk veneers during the gluing process of Elaeis palm plywood. Matrix assisted laser desorption Ionization time of flight (MALDI-TOF) mass spectrometry (MS) illustrated and confirmed a series number of the phenol–urea co-condensates repeating unit in the prepared PUF resins which corroborated well with its mechanical properties (modulus of elasticity and modulus of rupture), bonding quality (dry test and weather boil proof or WBP test) and physical properties. A series of PF, UF and PUF resins oligomers forming repeating units up to 1833 Da were identified. Besides that, the solid state ¹³Carbon nuclear magnetic resonance (NMR) interpretation identified that the signal at 44–45 ppm and 54–55 ppm corresponding to methylene bridges were co-condensated in between phenol and urea in the PUF resin system. The ¹³C NMR investigation showed that the synthesis process of PUF resin contained no free formaldehyde elements. Furthermore, the proportion of urea and methylolureas in the mixture to synthesis PUF resin were sufficient and incorporated well into the formulation by reacting with LMWPF units to form co-condensed methylene bridges. This study showed a new and useful method to synthesize PUF resin during the gluing process of manufactured Elaeis palm plywood which can also enhance the performance of Elaeis palm plywood panels for structural instead of utility grade applications.     

Phenol–formaldehyde‐type resins made from phenol‐liquefied wood for the bonding of particleboard

Liquefaction of southern pine wood in phenol in 30–40 : 70–60 weight ratios resulted in homogeneous liquefied materials, which were directly used to synthesize phenol–formaldehyde (PF)‐type resins. The synthesized resins showed good physical and handling properties: low viscosity, stability for storage and transportation, and resin applicable by a common sprayer. Particleboard panels bonded with the synthesized resins showed promising physical properties and significantly lower formaldehyde emission values than those bonded with the urea–formaldehyde resin control. One deficiency observed for the synthesized resins was lower internal bond values, which might be overcome the use of a hot‐stacking procedure. Overall, the process of wood liquefaction with limited amounts of phenol as a solvent was shown to have the potential of providing practical, low‐cost PF‐type resins with very low formaldehyde emission potentials. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of phenolic resol resins using cornstalk-derived bio-oil produced by direct liquefaction in hot-compressed phenol–water

For the synthesis of biomass-based resol resins, cornstalk powders were liquefied in a hot-compressed phenol–water (1:4, wt./wt.) medium at 300–350 °C. It was observed that essentially no phenol was reacted with the cornstalk degradation intermediates during the liquefaction process. The cornstalk-derived bio-oils contained oligomers of phenol and substituted phenols, originated primarily from the lignin component of the cornstalk feedstock. Using the cornstalk-derived bio-oils, resol resins were readily synthesized under the catalysis of sodium hydroxide. The biomass-derived resol resins were brown viscous liquids, possessing broad molecular weight distributions. In comparison with those of a conventional phenol resol resin, the properties of the bio-based resins were characterized by GPC, FTIR, DSC and TGA. The as-synthesized bio-oil resol resin exhibited typical properties of a thermosetting phenol–formaldehyde resin, e.g., exothermic curing temperatures at about 150–160 °C, and an acceptable residual carbon yield of ca 56% at 700 °C for the cured material.     

Highly thermally stable novolac derivatives and their properties in epoxy composites

Two diazo‐coupling novolac derivative resins (carbonyl phenyl azo novolac resin and carbonyl phenol–biphenylene azo novolac resin) were used as flame retardants. The cured resins exhibited elevated glass‐transition temperatures from 115°C (blank) to 195 and 167°C, respectively. The char yield at 800°C was increased, which elaborated the effectiveness of flame retardancy with evaluated limiting oxygen indices around 36 to 40. This was mainly attributed to the increased crosslink densities and highly aromatic contents in the modified phenol novolac derivative resins, which exhibited higher thermal degradation energies. Furthermore, the more effective flame retardancy was expected because of the loss of nitrogen during combustion. Through the evaluation of the cooperative flame retardancy in the organic/inorganic hybrid with char yield and increasing limiting oxygen index percentage, the effects of the filler showed cooperative flame retardancy only with the appropriate addition and with a difference in the crosslinking densities. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Development of a DOPO‐containing melamine epoxy hardeners and its thermal and flame‐retardant properties of cured products

In this study, a novel Schiff base of melamine used as flame‐retardant curing agent for epoxy resins, was synthesized via condensation reaction of 4‐hydroxybenzaldehyde with melamine, followed by the addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphen‐anthrene 10‐oxide (DOPO) to the resulting imine linkage. The structure of DOPO‐containing melamine Schiff base (P‐MSB) was characterized by Fourier transformed infrared spectroscopy, ¹H‐nuclear magnetic resonance (¹H‐NMR) and ³¹P‐NMR. The compound (P‐MSB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) to prepare flame‐retardant epoxy resins for electronic application. The thermal and flame‐retardant properties of the epoxy resins cured by various equivalent ratios phenol formaldehyde novolac (PN) and P‐MSB were investigated by the nonisothermal differential scanning calorimetry, the thermogravimetric analysis, and limiting oxygen index test. The obtained results showed that the cured epoxy resins possessed high T_g (165°C) and good thermal stability (T_5%, 321°C). Moreover, the P‐MSB/CNE systems exhibited higher limiting oxygen index (35) and more char was maintained in P‐MSB/CNE systems than that in PN/CNE system and the effective synergism of phosphorus–nitrogen indicated their excellent flame retardancy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and properties of halogen-free flame retardant epoxy resins with phosphorus-containing siloxanes

Novel epoxy resin modifiers, DOPO–TMDS and DOPO–DMDP were synthesized by addition reaction of divinylsiloxane with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). Halogen-free flame retardant epoxy resins were obtained through modification of o-cresol novolac epoxy resin cured by phenol novolac resin using DOPO–TMDS and DOPO–DMDP which were characterized by ¹H NMR, ¹³C NMR, ³¹P NMR and FT-IR measurements. Effects of the phosphorus-containing siloxanes on thermal stabilities, mechanical properties and flame retardant properties of the epoxy resins were investigated. The cured epoxy resins exhibited better mechanical properties and greatly improved flame retardant properties due to the presence of phosphorus-containing siloxanes. The cured epoxy resins with phosphorus loading of 2.0 wt% showed LOI values of 32–33 and achieved UL94V-0 ratings.     

Bark extractives-based phenol–formaldehyde resins from beetle-infested lodgepole pine

In this study, phenol–formaldehyde (PF) resins derived from the bark extractives were synthesized and characterized. Bark of lodgepole pine (Pinus contorta Dougl.) infested by mountain pine beetle (Dendroctonus ponderosae Hopkins) was first extracted with 1% NaOH. The bark extractives with and without acid-neutralization were then dried to the solid state. The neutralized and non-neutralized extractives were used to partially replace petroleum-based phenol for synthesizing the bark extractives-PF resins. In comparison with a commercial PF resin and a laboratory made PF resin (Lab PF), the bark extractive-PF resins were found to have higher molecular weights, higher viscosities, and shorter gel times. Acid neutralization of the bark extractives increased the molecular weight of the extractives and modified the performance and curing behavior of the resulting bark extractive-PF resins. Bark extractive-PF resins (BEPF) showed a similar level of post-cured thermal stability to that of the lab PF at higher temperatures, but they differed significantly from that of the commercial PF resin. The bark extractive-PF resins made from both neutralized and non-neutralized extractives at 30% replacement of phenol (by weight) exhibited similar dry and wet bond strengths to the commercial PF resin. At 50% substitution level, BEPF had dry and wet bond strengths similar to the lab PF resin. Our findings suggest that alkaline extractives from mountain pine beetle-infested lodgepole pine bark are suitable for partially substituting phenol in the synthesis of phenolic resin for use in wood adhesives.     

A 13C-NMR analysis method for phenol–formaldehyde resin strength and formaldehyde emission

A method based on the use of ¹³C-NMR relative peak intensity ratios for different characteristic chemical groups, known or supposed to contribute to phenol–formaldehyde (PF) resin strength and formaldehyde emission is presented. The method relates results obtained by ¹³C-NMR analysis of liquid PF resins with the strength and formaldehyde emission in the resin-hardened state. Correlation of differnt peak ratio with experimental results allows the proposal of equations relating the sum of different ¹³C-NMR peak ratios with the two mentioned physical properties of the same resins in their hardened state. The equations presented appear to have some applied value in predicting physical properties of hardened industrial-type PF resins from a single ¹³C-NMR spectrum of the original liquid resin, as well as to render easier comparison between different PF resin formulations. © 1995 John Wiley & Sons, Inc.     

Comparisons of the cure of phenol–formaldehyde novolac and resol systems by differential scanning calorimetry

Comparisons were made of differential scanning-calorimetric (DSC) thermograms of both liquid and powdered commercial phenol–formaldehyde resins. By a combination of the results from analyses under a variety of conditions, such as ambient pressure, high pressure, using freeze-dried samples, and also by direct observation of the resin-curing process in wood-veneer assemblies, the curing reactions of phenol–formaldehyde resins were found to differ for resol and novolac systems. At a heating rate of 10°C/min, the resol resin showed endothermic curing reactions at temperatures of about 150°C, while the novolac-type resin showed an exothermic peak maximum at about 160°C. Results are presented to show how DSC can be used to differentiate between a resol and novolac system.     

Effect of resin type and content on properties of composite particleboard made of a mixture of wood and rice husk

This study investigated the effect of resin type and content on the dimensional stability and mechanical properties of single-layer composite particleboards made of a mixture of wood particles (70 wt%) and rice husk particles (30 wt%). Two types of resin, urea–formaldehyde (UF) resin and phenol–formaldehyde (PF) resin, were used in the experiments at three different contents which were 8, 10, or 12 wt%. The dimensional stability of the samples was significantly improved by increasing the resin content. When the contents of the UF and PF resins increased from 8 to 12 wt%, the WA values of the samples decreased to18% and 33%, respectively. Similar results were also observed for the TS values. The UF resin bonded samples swelled two times more than the PF resin bonded particleboard. The mechanical properties of the PF resin bonded samples were better than the UF resin bonded samples. When the contents of the UF and PF resins increased from 8% to 12 wt%, the internal bond strength values of the samples increased to 21% and 41%, respectively. The bending strength and modulus of elasticity of the samples were not significantly increased by increasing contents of the UF and PF resins, except for the 12 wt% content.     

The effect of allylation degree on processing properties,thermal cure,and thermal properties of BMAN resins

A series of allyl‐functional novolac (AN) resins with various allylation degree, from 32.4 to 114.6%, were synthesized and blended reactively with 4,4′‐bismaleimide biphenyl methane (BMI) at a weight ratio of 2.50 : 1 to get BMI‐modified and allyl‐functional novolac (BMAN) resins. Structural characteristics of the resins were determined by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹HNMR) techniques. Processing properties of BMAN resin system was evaluated by solubility, rheology, and thermal gelation, and the results show that processing properties of BMAN resins were excellent and could be tailored by changing allylation degree of AN resins. Differential scanning calorimetry (DSC) was used to evaluate cure reactivity of BMAN resin system, and the results reveal that the resins with higher allylation degree possessed better cure reactivity. Thermal properties were evaluated by means of dynamic mechanical analysis (DMA) and thermogravimetry analysis (TGA) techniques. The results reveal that with increase in allylation degree of resins the thermal stability of BMAN resins increased because of increase in crosslinking density, but char‐yields of the above resins at 800°C decreased in turn. Understanding of the relationship between allylation degree and properties of the resins would be useful to direct the design of material to meet different requirements of applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Fast advancement and hardening acceleration of low‐condensation alkaline PF resins by esters and copolymerized urea

Low‐condensation phenol‐formaldehyde (PF) resins coreacted under alkaline conditions with up to 42% molar urea on phenol during resin preparation yielded PUF resins capable of faster hardening times than equivalent pure PF resins prepared under identical conditions and presented better performance than the latter. The water resistance of the PUF resins prepared seemed comparable to pure PF resins when used as adhesives for wood particleboard. Part of the urea was found by ¹³C‐NMR to be copolymerized to yield the alkaline PUF resin; whereas, especially at the higher levels of urea addition, unreacted urea was still present in the resin. Increase of the initial formaldehyde to phenol molar ratio decreased considerably the proportion of unreacted urea and increased the proportion of PUF resin. A coreaction scheme of phenolic and aminoplastic methylol groups with reactive phenol and urea sites based on previous model compounds work has been proposed, copolymerized urea functioning as a prebranching molecule in the forming, hardened resin network. The PUF resins prepared were capable of further noticeable curing acceleration by addition of ester accelerators; namely, glycerol triacetate (triacetin), to reach gel times as fast as those characteristic of catalyzed aminoplastic resins, but at wet strength values characteristic of exterior PF resins. Synergy between the relative amounts of copolymerized urea and ester accelerator was very noticeable at the lower levels of the two parameters, but this effect decreased in intensity toward the higher percentages of urea and triacetin. ¹³C‐NMR assignements of the relevant peaks of the PUF resins are reported and compared with what has been reported in the literature for mixed, coreacted model compounds and pure PF and urea‐formaldehyde (UF) resins. The relative performance of the different PUF resins prepared was checked under different conditions by thermomechanical analysis (TMA) and by preparation of wood particleboard, and the capability of the accelerated PUF resins to achieve press times as fast as those of aminoplastic (UF and others) resins was confirmed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 359–378, 1999     

低游离酚热塑性酚醛树脂的合成

改变传统合成工艺,在热塑性酚醛树脂合成过程中加入1种有机酸A,得到低游离酚酚醛树脂。考察了酚、醛物质的量比,有机酸A用量对树脂软化点的影响以及反应温度、反应时间对树脂中游离酚含量的影响。确定了最佳合成工艺条件:第1步反应温度98~104℃,反应时间1 h,催化剂盐酸用量1.0%(基于苯酚质量),苯酚、甲醛和有机酸A的物质的量比为1∶0.82∶0.02;第2步反应温度180℃,反应时间1.5 h。通过气相色谱分析游离酚质量分数由原来的5%~10%降到0.55%。     

合成条件对邻甲酚系线形酚醛树脂的影响

采用双层反应设备,通过碱酸分步催化法合成了一系列纯邻甲酚和以邻甲酚为主成分的邻甲酚系线形酚醛树脂。利用GPC、NMR等研究了催化剂氢氧化钠的用量、醛酚比以及酚的种类和用量对树脂的分子质量(Mw)、分子质量分布(Mw/Mn)及抗碱性等的影响。结果表明,氢氧化钠用量达到酚总质量的0.4%、醛酚比接近于1时可合成分子质量高、分子质量分布窄的树脂。可利用醛酚比控制树脂的分子质量,可通过调整酚的种类和用量控制树脂的双邻位缩聚值(Ro-o)以及酚醛树脂的质量与其所含酚羟基质量之比值。合成的树脂可用于PS版、热敏CTP版以及LCD用抗蚀剂等。     

Properties of plywood panels bonded with ionic liquid-modified lignin–phenol–formaldehyde resin

The aim of this research was to investigate the physical and mechanical properties of plywood panels bonded with ionic liquid-modified lignin–phenol–formaldehyde (LPF) resin. For this purpose, soda bagasse lignin was modified by 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) ionic liquid, and then, various contents of modified lignins (10, 15, and 20 wt%) were added as a substitute of phenol in phenol–formaldehyde (PF) resin synthesis. The properties of the synthesized resin were compared with those of a control PF resin. The changes in curing behavior of the resins prepared were analyzed by differential scanning calorimetry (DSC). The physical properties of the resins prepared, as well as the water absorption, thickness swelling, shear strength, and formaldehyde emission of the plywood panels bonded with these adhesives, were measured according to standard methods. DSC analysis indicated that in comparison with PF resins, curing of the LPF resin occurred at lower temperatures. The physical properties of the synthesized resins indicated that viscosity and solid content increased, while gel time and density decreased by addition of treated lignin to the PF resin. Although the panels containing resins with modified lignin yielded low formaldehyde emission, their dimensional stability was worse than those bonded with a commercial PF adhesive. The plywood prepared using IL-treated lignin PF resins has shear strength, which satisfy the requirements of the relevant standards specifications and significantly better than that of panels prepared with the control PF resin. The mechanical properties of the panels could be significantly enhanced with increased percentage of treated lignin content from 0 to 20 wt%.     

Effect of Phenol/Formaldehyde Stoichiometry on the Modification of Epoxy Resin Using Epoxidized Novolacs

ABSTRACT

Unmodified epoxy resins based on bisphenol A exhibit brittleness and low elongation after cure. This article reports the results of a study for improving the properties of epoxy resin by blending with suitable thermosets. Hybrid polymer networks of diglycidyl ether of bisphenol A (DGEBA) resin with epoxidized phenolic novolac resins (EPN) containing phenol and formaldehyde in different stoichiometric ratios were prepared by physical blending. The modified epoxy resins were found to exhibit improved mechanical and thermal properties compared to the neat resin. DGEBA resins containing 2.5 to 20 wt% of epoxidized novolac resins (EPN) prepared in various stoichiometric ratios (1:0.6, 1:0.7, 1:08, and 1:0.9) between phenol and formaldehyde were cured using a room temperature amine hardener. The cured samples were tested for mechanical properties such as tensile strength, modulus, elongation, and energy absorption at break. All the EPNs are seen to improve tensile strength, elongation, and energy absorption at break of the resin. The blend of DGEBA with 10 wt% of EPN-3 (1:0.8) exhibits maximum improvement in strength, elongation, and energy absorption. EPN loading above 10 wt% is found to lower these properties in a manner similar to the behavior of any filler material. The property profiles of epoxy–EPN blends imply a toughening action by epoxidized novolac resins and the extent of modification is found to depend on the molar ratio between phenol and formaldehyde in the novolac.     

Synthesis of novolac‐type phenolic resins using glucose as the substitute for formaldehyde

Novel Novolac type phenolic resins were prepared using glucose as the substitute for toxic formaldehyde (a carcinogenic chemical). The resins were synthesized with varying molar ratios of phenol to glucose, catalyzed by strong acid (such as sulfuric acid) at 120–150°C. Analysis of the resins using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H‐NMR) showed that they were broadly distributed oligomers derived from the Fridel‐Crafts condensation of phenol and glucose. Using hexamethylenetetramine (HMTA) as the curing agent, the phenol‐glucose resins could be thermally cured and exhibited exothermic peaks at 130–180°C, typical of thermosetting phenolic resins. The cured resins showed satisfactory thermal stability, e.g., they started to decompose at >280°C with residual carbon yields of above 58% at 600°C. Based on the thermal properties, phenol‐glucose resin with a molar ratio of 1 : 0.5 is promising as it could be cured at a lower temperature (147°C) and exhibited a satisfactorily good thermal stability: it started to decompose at >300°C with a residual carbon yield of >64% at 600°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and cure kinetics of liquefied wood/phenol/formaldehyde resins

Wood liquefaction was conducted at a 2/1 phenol/wood ratio in two different reactors: (1) an atmospheric three‐necked flask reactor and (2) a sealed Parr reactor. The liquefied wood mixture (liquefied wood, unreacted phenol, and wood residue) was further condensed with formaldehyde under acidic conditions to synthesize two novolac‐type liquefied wood/phenol/formaldehyde (LWPF) resins: LWPF1 (the atmospheric reactor) and LWPF2 (the sealed reactor). The LWPF1 resin had a higher solid content and higher molecular weight than the LWPF2 resin. The cure kinetic mechanisms of the LWPF resins were investigated with dynamic and isothermal differential scanning calorimetry (DSC). The isothermal DSC data indicated that the cure reactions of both resins followed an autocatalytic mechanism. The activation energies of the liquefied wood resins were close to that of a reported lignin–phenol–formaldehyde resin but were higher than that of a typical phenol formaldehyde resin. The two liquefied wood resins followed similar cure kinetics; however, the LWPF1 resin had a higher activation energy for rate constant k₁ and a lower activation energy for rate constant k₂ than LWPF2. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of a bifunctional epoxy monomer containing anthracene moiety and properties of its cured polymer with phenol novolac

A new type of epoxy resin containing anthracene moiety in the backbone was synthesized and was confirmed by elemental analysis, infrared spectroscopy, and ¹H nuclear magnetic resonance spectroscopy. Thermal properties of its cured polymer with phenol novolac were examined by thermomechanical, dynamic mechanical, and thermogravimetric analyses. The cured polymer with phenol novolac showed higher glass transition temperature (T_g), lower thermal expansion, lower moisture absorption, and higher anaerobic char yield at 700°C than a cured polymer having a phenylene group in place of anthracene moiety. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 953–959, 1999