Recombination of charge carriers in the GaAs-based <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">i</Emphasis>-<Emphasis Type="Italic">n</Emphasis> diode

It is established that the radiative recombination of charge carriers plays a substantial role in the GaAs-based p-i-n diodes at high densities of the forward current. It is shown experimentally that the diodes operating in microwave integrated circuits intensely emit light in the IR range with wavelengths from 890 to 910 nm. The obtained results indicate the necessity of taking into account the features of recombination processes in the GaAs-based microwave p-i-n diodes.     

Electrodeposition of <Emphasis Type="Italic">p</Emphasis>-Type Sb<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> Thermoelectric Films

Thermoelectric Sb _x Te _y films were potentiostatically electrodeposited in aqueous nitric acid electrolyte solutions containing different concentrations of TeO₂. Stoichiometric Sb _x Te _y films were obtained by applying a voltage of −0.15 V versus saturated calomel electrode (SCE) using a solution consisting of 2.4 mM TeO₂, 0.8 mM Sb₂O₃, 33 mM tartaric acid, and 1 M HNO₃. The nearly stoichiometric Sb₂Te₃ films had a rhombohedral structure, R[`3]m R\bar{3}m , with a preferred orientation along the (015) direction. The films had hole concentration of 5.8 × 10¹⁸/cm³ and exhibited mobility of 54.8 cm²/Vs. A more negative potential resulted in higher Sb content in the deposited Sb _x Te _y films. Furthermore, it was observed that the hole concentration and mobility decreased with increasingly negative deposition potential, and eventually showed insulating properties, possibly due to increased defect formation. The absolute value of the Seebeck coefficient of the as-deposited Sb₂Te₃ thin film at room temperature was 118 μV/K.     

Mechanisms of charge transport in anisotype <Emphasis Type="Italic">n</Emphasis>-TiO<Subscript>2</Subscript>/<Emphasis Type="Italic">p</Emphasis>-CdTe heterojunctions

Surface-barrier anisotype n-TiO₂/p-CdTe heterojunctions are fabricated by depositing thin titanium-dioxide films on a freshly cleaved surface of single-crystalline cadmium-telluride wafers by reactive magnetron sputtering. It is established that the electric current through the heterojunctions under investigation is formed by generation-recombination processes in the space-charge region via a deep energy level and tunneling through the potential barrier. The depth and nature of the impurity centers involved in the charge transport are determined.     

An ultra-low-power CMOS symmetrical OTA for low-frequency <Emphasis Type="Italic">G</Emphasis><Subscript><Emphasis Type="Italic">m</Emphasis></Subscript>-<Emphasis Type="Italic">C</Emphasis> applications

In this paper an ultra-low-power CMOS symmetrical operational transconductance amplifier (OTA) for low-frequency G _m -C applications in weak inversion is presented. Its common mode input range and its linear input range can be made large using DC shifting and bulk-driven differential pair configuration (without using complex approaches). The symmetrical OTA was successfully verified in a standard CMOS 0.35-μm process. The measurements show an open loop gain of 61 dB and a unit gain frequency of 195 Hz with only 800 mV of power supply voltage and just 40 nW of power consumption. The transconductance is 66 nS, which is suitable for low-frequency G _m -C applications.     

Electrical and gas sensing properties of <Emphasis Type="Italic">por</Emphasis>-Si/SnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanocomposite layers

The electrical characteristics and chemical reactant sensitivity of layers of heterogeneous nanocomposites based on porous silicon and nonstoichiometric tin oxide por-Si/SnO _x , fabricated by the magnetron sputtering of tin with subsequent oxidation, are studied. It is shown that, in the nanocomposite layers, a system of distributed heterojunctions (Si/SnO _x nanocrystals) forms, which determine the electrical characteristics of such structures. The sensitivity of test sensor structures based on por-Si/SnO _x nanocomposites to NO₂ is determined. A mechanism for the effect of the adsorption of NO₂ molecules on the current-voltage characteristics of the por-Si(p)/SnO _x (n) heterojunctions is suggested.     

Subnanosecond 4<Emphasis Type="Italic">H</Emphasis>-SiC diode current breakers

Mesa epitaxial 4H-SiC-based p ⁺-p-n ₀-n ⁺ diodes have been fabricated and their reverse recovery characteristics have been measured in modes typical of fast semiconductor current breakers, drift step recovery diodes, and SOS diodes. It has been found that, after the short (～10 ns) pulsed injection of nonequilibrium carriers by a forward current with a density of 200–400 A cm^?2 and the subsequent application of a reverse voltage pulse (with a rise time of 2 ns), diodes can break a reverse current with a density of 5–40 kA cm^?2 in a time of about (or less than) 0.3 ns. A possible mechanism for ultrafast current breaking is discussed.     

Dual-Frequency Behavior of Stacked High <Emphasis Type="Italic">T</Emphasis><Subscript><Emphasis Type="Italic">c</Emphasis></Subscript> Superconducting Microstrip Patches

The dual-frequency behavior of stacked high T _c superconducting rectangular microstrip patches fabricated on a two-layered substrate is investigated using a full-wave spectral analysis in conjunction with the complex resistive boundary condition. Using a matrix representation of each layer, the dyadic Green’s functions of the problem are efficiently determined in the vector Fourier transform domain. The stationary phase method is used for computing the radiation electric field of the antenna. The proposed approach is validated by comparison of the computed results with previously published data. Variations of the lower and upper resonant frequencies, bandwidth and quality factor with the operating temperature are given. Results showing the effects of the bottom patch thickness as well as the top patch thickness on the dual-frequency behavior of the stacked configuration are also presented and discussed. Finally, for a better comprehension of the dual-frequency operation, a comparison between the characteristics of the lower and upper resonances is given.     

Sectoral transition between modes <Emphasis Type="Italic">H</Emphasis><Subscript>10</Subscript> and <Emphasis Type="Italic">H</Emphasis><Subscript>01</Subscript>

The excitation of main parasitic modes E ₁₁, H ₁₁, and H ₂₁, which have cutoff sections in a sectoral transition between modes H ₁₀ and H ₀₁, is investigated. It is shown that, for magnetic modes, including modes H ₁₁ and H ₂₁, it is unnecessary to use the Airy equation and that this circumstance simplifies the design relationships. The energies of these modes are calculated as functions of the transition parameters.     

3<Emphasis Type="Italic">C</Emphasis>-SiC <Emphasis Type="Italic">p-n</Emphasis> structures grown by sublimation on 6<Emphasis Type="Italic">H</Emphasis>-SiC substrates

Sublimation epitaxy in a vacuum has been employed to grow n-and p-type 3C-SiC layers on 6H-SiC substrates. Diodes have been fabricated on the basis of the p-n structure obtained, and their parameters have been studied by measuring their current-voltage and capacitance-voltage characteristics and by applying the DLTS and electroluminescence methods. It is shown that the characteristics of the diodes studied are close to those of diodes based on bulk 3C-SiC. A conclusion is made that sublimation epitaxy can be used to fabricate 3C-SiC p-n structures on substrates of other silicon carbide polytypes.     

Optical storage on the basis of an <Emphasis Type="Italic">n</Emphasis>-InSb-SiO<Subscript>2</Subscript>-<Emphasis Type="Italic">p</Emphasis>-Si heterostructure

The presence of potential barriers and deep traps in n-InSb/SiO₂/p-Si heterostructures makes it possible to realize the optical memory function on the basis of this structure. The maximal memory coefficient measured on the forward current voltage characteristic is as large as ～10⁴. This heterostructure can be used as an optoelectronic memory cell, which provides a means not only for the storage of signals but also for their summation.     

Preparation and Thermoelectric Properties of LaGd<Subscript>1+<Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript>3</Subscript> and SmGd<Subscript>1+<Emphasis Type="Italic">x</Emphasis></Subscript>S<Subscript>3</Subscript>

Thermoelectric materials are attractive since they can recover waste heat directly in the form of electricity. In this study, the thermoelectric properties of ternary rare-earth sulfides LaGd_1+x S₃ (x = 0.00 to 0.03) and SmGd_1+x S₃ (x = 0.00 to 0.06) were investigated over the temperature range of 300 K to 953 K. These sulfides were prepared by CS₂ sulfurization, and samples were consolidated by pressure-assisted sintering to obtain dense compacts. The sintered compacts of LaGd_1+x S₃ were n-type metal-like conductors with a thermal conductivity of less than 1.7 W K⁻¹ m⁻¹. Their thermoelectric figure of merit ZT was improved by tuning the chemical composition (self-doping). The optimized ZT value of 0.4 was obtained in LaGd_1.02S₃ at 953 K. The sintered compacts of SmGd_1+x S₃ were n-type hopping conductors with a thermal conductivity of less than 0.8 W K⁻¹ m⁻¹. Their ZT value increased significantly with temperature. In SmGd_1+x S₃, the ZT value of 0.3 was attained at 953 K.     

High-Performance (Ag<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>SbTe<Subscript><Emphasis Type="Italic">x</Emphasis>/2+1.5</Subscript>)<Subscript>15</Subscript>(GeTe)<Subscript>85</Subscript> Thermoelectric Materials Prepared by Melt Spinning

A new preparation process combining melt spinning and hot pressing has been developed for the (Ag _x SbTe _x/2+1.5)₁₅(GeTe)₈₅ (TAGS-85) system. Compared with samples prepared by the traditional air-quenching and hot-pressing method, electrical conductivity and thermal conductivity are lowered. The thermoelectric performance of the TAGS-85 samples varied with changing Ag content and reached the highest ZT of 1.48 when x was 0.8 for the melt-spun sample, compared with the maximum ZT of 1.36 for the air-quenched sample. The Seebeck coefficient of the melt-spun TAGS-85 alloys was improved, while both the electrical conductivity and thermal conductivity were decreased. The net result of this process is to effectively enlarge the temperature span of ZT > 1, which will benefit industrial application.     

Excess leakage currents in high-voltage 4<Emphasis Type="Italic">H</Emphasis>-SiC Schottky diodes

The high-voltage 4H-SiC Schottky diodes are fabricated with a nickel barrier and a guard system in the form of “floating” planar p-n junctions. The analysis of I–V characteristics measured in a wide temperature range shows that the forward current is caused by thermionic emission; however, the current is “excessive” in the reverse direction. It is assumed that the reverse current flows locally through the points of the penetrating-dislocation outcrop to the Ni-SiC interface. The shape of reverse I–V characteristics makes it possible to conclude that the electron transport is governed by the monopolar-injection mechanism (the space-charge limited current) with participation of capture traps.     

Electric properties of (SiC)<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>(AlN)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/SiC anisotropic heterostructures

The heterostructures of p-(SiC)_{1 − x} (AlN) _x / _n -6H-SiC are synthesized by means of sublimation epitaxy of (SiC)_{1 − x} (AlN) semiconductor solid solutions at 6H-SiC substrates. The results of the investigation of the concentration and temperature dependences on current-voltage characteristics (CVCs) are presented. It is revealed that due to the high potential barriers the forward current is caused by the tunneling and recombination processes of charge carriers via states at the boundary surface.     

Effects of SiC Nanodispersion on the Thermoelectric Properties of <Emphasis Type="Italic">p</Emphasis>-Type and <Emphasis Type="Italic">n</Emphasis>-Type Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>-Based Alloys

Polycrystalline p-type Bi_0.5Sb_1.5Te₃ and n-type Bi₂Te_2.7Se_0.3 thermoelectric (TE) alloys containing a small amount (vol.% ≤5) of SiC nanoparticles were fabricated by mechanical alloying and spark plasma sintering. It was revealed that the effects of SiC addition on TE properties can be different between p-type and n-type Bi₂Te₃-based alloys. SiC addition slightly increased the power factor of the p-type materials by decreasing both the electrical resistivity (ρ) and Seebeck coefficient (α), but decreased the power factor of n-type materials by increasing both ρ and α. Regardless of the conductivity type, the thermal conductivity was reduced by dispersing SiC nanoparticles in the Bi₂Te₃-based alloy matrix. As a result, a small amount (0.1 vol.%) of SiC addition increased the maximum dimensionless figure of merit (ZT _max) of the p-type Bi_0.5Sb_1.5Te₃ alloys from 0.88 for the SiC-free sample to 0.97 at 323 K, though no improvement in TE performance was obtained in the case of n-type Bi₂Te_2.7Se_0.3 alloys. Importantly, the SiC-dispersed alloys showed better mechanical properties, which can improve material machinability and device reliability.     

<Emphasis Type="Italic">p</Emphasis><Superscript>+</Superscript>-Si-<Emphasis Type="Italic">n</Emphasis>-CdF<Subscript>2</Subscript> heterojunctions

Boron diffusion and the vapor-phase deposition of silicon layers are used to prepare ultrashallow p⁺-n junctions and p⁺-Si-n-CdF₂ heterostructures on an n-CdF₂ crystal surface. Forward portions of the I–V characteristics of the p⁺-n junctions and p⁺-Si-n-CdF₂ heterojunctions reveal the CdF₂ band gap (7.8 eV), as well as allow the identification of the valence-band structure of cadmium fluoride crystals. Under conditions in which forward bias is applied to the p⁺-Si-n-CdF₂ heterojunctions, electroluminescence spectra are measured for the first time in the visible spectral region.     

Graphite/<Emphasis Type="Italic">p</Emphasis>-SiC Schottky Diodes Prepared by Transferring Drawn Graphite Films onto SiC

Graphite/p-SiC Schottky diodes are fabricated using the recently suggested technique of transferring drawn graphite films onto p-SiC single-crystal substrates. The current–voltage and capacitance–voltage characteristics are measured at different temperatures and at different frequencies of a small-signal AC signal, respectively. The temperature dependences of the potential-barrier height and of the series resistance of the graphite/p-SiC junctions are measured and analyzed. The dominant mechanisms of the charge–carrier transport through the diodes are determined. It is shown that the dominant mechanisms of the transport of charge carriers through the graphite/p-Si Schottky diodes at a forward bias are multi-step tunneling recombination and tunneling described by the Newman formula (at high bias voltages). At reverse biases, the dominant mechanisms of charge transport are the Frenkel–Poole emission and tunneling. It is shown that the graphite/p-SiC Schottky diodes can be used as detectors of ultraviolet radiation since they have the open-circuit voltage V_oc = 1.84 V and the short-circuit current density I_sc = 2.9 mA/cm² under illumination from a DRL 250-3 mercury–quartz lamp located 3 cm from the sample.     

Experimental 4<Emphasis Type="Italic">H</Emphasis>-SiC junction-barrier Schottky (JBS) diodes

4H-SiC junction-barrier Schottky (JBS) diodes have been fabricated with local p–n junctions under the Schottky contact formed by nonequilibrium diffusion of boron. Static and dynamic characteristics of the JBS diodes are compared with those of similar 4H-SiC Schottky diodes. It is shown that, compared with ordinary Schottky diodes, the JBS diodes have leakage currents that are, on average, a factor of 200 lower at the same reverse bias. The reverse recovery charge is the same for both types of diodes and equal to the charge of majority carriers removed from the n-type base region in switching.     

Conductivity compensation in <Emphasis Type="Italic">p</Emphasis>-6<Emphasis Type="Italic">H</Emphasis>-SiC in irradiation with 8-MeV protons

Carrier removal rate (V _d ) in p-6H-SiC in its irradiation with 8-MeV protons has been studied. The p-6H-SiC samples were produced by sublimation in vacuum. V _d was determined by analysis of capacitance-voltage characteristics and from results of Hall effect measurements. It was found that complete compensation of samples with initial value of N _a − N _d ≈ 1.5 × 10¹⁸ cm⁻³ occurs at an irradiation dose of ∼1.1 × 10¹⁶ cm⁻². In this case, the carrier removal rate was ∼130 cm⁻¹.     

Visible photoluminescence of selectively etched porous <Emphasis Type="Italic">nc</Emphasis>-Si-Sio<Subscript>x</Subscript> structures

The results of the first studies of the effect of selective etching on photoluminescence in porous nc- Si–SiO_x structures containing Si nanoclusters (nc-Si) in the SiO_x matrix are reported. In the initial samples at room temperature, intense photoluminescence bands are observed with peaks at 840 and 660 nm corresponding to radiative recombination of free charge carriers (or charge carriers bound to excitons) excited in nc- Si. After selective etching of the nc- Si–SiO_x structures in 1% HF solution, these bands are noticeably shifted to higher energies of the spectrum. It is suggested that the evolution of the spectra is due to the decrease in the Si nanoparticle dimensions on etching of the oxide and additional oxidation of nc- Si. The results show that selective etching of the oxide matrix can be used to control the radiation spectra of porous nc- Si–SiO_x structures.