柔性染料敏化太阳能电池和柔性钙钛矿太阳能电池关键电极材料研究进展

柔性太阳能电池具有轻便、可弯曲的优点,可用于可穿戴设备等器件的即时充电,具有广阔的应用前景,受到持续广泛的关注。柔性太阳能电池制备中的关键在于基材以及与之相关的电极材料的制备。本文综述了柔性染料敏化太阳能电池和柔性钙钛矿太阳能电池近几年的发展情况,着重介绍了柔性染料敏化太阳能电池光阳极、对电极以及柔性钙钛矿太阳能电池的底电极和电子传输层。结果发现高温烧结目前仍是制备高效染料敏化太阳能电池光阳极不可避免的方法,而对电极则不受这一限制并且已经有多种材料的效率超过了高温烧结的铂。柔性钙钛矿太阳能电池的研究重点是用其他材料代替底电极中柔性较差的ITO以及高温烧结的电子传输材料TiO₂,并且都取得显著成效。在此基础上,展望了柔性染料敏化太阳能电池和柔性钙钛矿太阳能电池未来的发展方向。     

Efficient light harvesting from flexible perovskite solar cells under indoor white light-emitting diode illumination

This is the first report of an investigation on flexible perovskite solar cells for artificial light harvesting by using a white light-emitting diode (LED) lamp as a light source at 200 and 400 lx,values typically found in indoor environments.Flexible cells were developed using either low-temperature sol-gel or atomiclayer-deposited compact layers over conducting polyethylene terephthalate (PET)substrates,together with ultraviolet (UV)-irradiated nanoparticle TiO2 scaffolds,a CH3NH3PbI3-xClx perovskite semiconductor,and a spiro-MeOTAD hole transport layer.By guaranteeing high-quality carrier blocking (via the 10-40 nm-thick compact layer) and injection (via the nanocrystalline scaffold and perovskite layers) behavior,maximum power conversion efficiencies (PCE) and power densities of 10.8％ and 7.2 μW.cm-2,respectively,at 200 lx,and 12.1％ and 16.0 μW·cm-2,respectively,at 400 lx were achieved.These values are the state-of-the-art,comparable to and even exceeding those of flexible dye-sensitized solar cells under LED lighting,and significantly greater than those for flexible amorphous silicon,which are currently the main flexible photovoltaic technologies commercially considered for indoor applications.Furthermore,there are significant margins of improvement for reaching the best levels of efficiency for rigid glass-based counterparts,which we found was a high of PCE ～24％ at 400 lx.With respect to rigid devices,flexibility brings the advantages of being low cost,lightweight,very thin,and conformal,which is especially important for seamless integration in indoor environments.     

Perovskite Solar Cells: From Materials to Devices

Perovskite solar cells based on organometal halide light absorbers have been considered a promising photovoltaic technology due to their superb power conversion efficiency (PCE) along with very low material costs. Since the first report on a long‐term durable solid‐state perovskite solar cell with a PCE of 9.7% in 2012, a PCE as high as 19.3% was demonstrated in 2014, and a certified PCE of 17.9% was shown in 2014. Such a high photovoltaic performance is attributed to optically high absorption characteristics and balanced charge transport properties with long diffusion lengths. Nevertheless, there are lots of puzzles to unravel the basis for such high photovoltaic performances. The working principle of perovskite solar cells has not been well established by far, which is the most important thing for understanding perovksite solar cells. In this review, basic fundamentals of perovskite materials including opto‐electronic and dielectric properties are described to give a better understanding and insight into high‐performing perovskite solar cells. In addition, various fabrication techniques and device structures are described toward the further improvement of perovskite solar cells.     

柔性钙钛矿太阳能电池研究进展

近年来,柔性钙钛矿太阳能电池由于具有质量轻、成本低、形状可塑、适用性广等优点,成为了太阳能电池领域炙手可热的研究课题。目前,该类柔性电池的最高光电转换效率已超过16%。本文针对柔性钙钛矿太阳能电池的结构及其柔性衬底,介绍了其主要的研究方向和目前的研究进展,并探讨了柔性钙钛矿太阳能领域面临的主要问题与挑战,最后展望了柔性钙钛矿太阳能电池的发展。