Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Preparation and properties of gel‐filled PVDF separators for lithium ion cells

Polyether gel‐filled poly(vinylidene fluoride) separators (GF‐PVDF separators) were prepared by means of thermal crosslinking of poly(ethylene glycol) methyl ether acrylate (PEGMEA) and poly(ethylene glycol) diacrylate (PEGDA) as gel constituents. The intrinsic properties of GF‐PVDF and their corresponding gel polymer electrolyte (GPE) were characterized by SEM, DSC, and electrochemical methods. It was found a relatively better GPE could be got when the filled polyether content no more than 60 wt % and its ion conductivity could reach 1.3 × 10^?3 S cm^?1. The GPE is compatible with anode and cathode of lithium ion battery at high voltage and its electrochemical window is 4.6 V (vs. Li/Li⁺). The coulombic efficiency could reach 94% after 100 cycles for the cells using such GPE. The results reveal that the composite polymer electrolyte qualifies as a potential application in lithium cells. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44473.     

Amelioration of electrochemical and photovoltaic performances on P(VP‐co‐VAc) based gel polymer electrolyte by incorporating double salt for dye‐sensitized solar cells

Dye‐sensitized solar cell (DSSC) is an alternative photovoltaic application used to replace the liquid electrolyte dependent conventional photovoltaic cell. In this research, gel polymer electrolyte (GPE) was used to replace the unstable liquid electrolyte. This GPE consists of poly[1‐vinylpyrrolidone‐co‐vinyl acetate] (P[VP‐co‐VAc]), tetrabutylammonium iodide (TBAI), sodium iodide (NaI), iodine (I₂), ethylene carbonate (EC), and propylene carbonate (PC). The GPE was tested for its ionic conductivity and an optimum level was reached at sample with 30% TBAI and 6% NaI at 1.17 × 10^?3 S cm^?1. The DSSC was then fabricated with all GPEs and a photovoltaic performance study was conducted. As a result, the highest photovoltaic conversion efficiency (PCE), η for a single salt was 3.04% for 40% TBAI. When a second salt is added, the system showed improvement in efficiency, η to 4.54% with short circuit current density, J_sc of 11.02 mA cm^?2 and open circuit voltage, V_oc of 0.67 V and FF of 61%. The other changes after the addition of TBAI and NaI salts have been observed through X‐ray diffraction, Fourier transformation and thermal analysis studies. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43805.     

Fabrication and properties of crosslinked poly(propylene carbonate maleate) gel polymer electrolyte for lithium‐ion battery

The poly(propylene carbonate maleate) (PPCMA) was synthesized by the terpolymerization of carbon dioxide, propylene oxide, and maleic anhydride. The PPCMA polymer can be readily crosslinked using dicumyl peroxide (DCP) as crosslinking agent and then actived by absorbing liquid electrolyte to fabricate a novel PPCMA gel polymer electrolyte for lithium‐ion battery. The thermal performance, electrolyte uptake, swelling ratio, ionic conductivity, and lithium ion transference number of the crosslinked PPCMA were then investigated. The results show that the T_g and the thermal stability increase, but the absorbing and swelling rates decrease with increasing DCP amount. The ionic conductivity of the PPCMA gel polymer electrolyte firstly increases and then decreases with increasing DCP ratio. The ionic conductivity of the PPCMA gel polymer electrolyte with 1.2 wt % of DCP reaches the maximum value of 8.43 × 10⁻³ S cm⁻¹ at room temperature and 1.42 × 10⁻² S cm⁻¹ at 50°C. The lithium ion transference number of PPCMA gel polymer electrolyte is 0.42. The charge/discharge tests of the Li/PPCMA GPE/LiNi_1/3Co_1/3Mn_1/3O₂ cell were evaluated at a current rate of 0.1C and in voltage range of 2.8–4.2 V at room temperature. The results show that the initial discharge capacity of Li/PPCMA GPE/LiNi_1/3Co_1/3Mn_1/3 O₂ cell is 115.3 mAh g⁻¹. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A redox‐mediator‐doped gel polymer electrolyte applied in quasi‐solid‐state supercapacitors

Methylene blue (MB) redox mediator was introduced into polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) blend host to prepare a gel polymer electrolyte (PVA‐PVP‐H₂SO₄‐MB) for a quasi‐solid‐state supercapacitor. The electrochemical properties of the supercapacitor with the prepared gel polymer electrolyte were evaluated by cyclic voltammetry, galvanostatic charge–discharge, electrochemical impedance spectroscopy, and self‐discharge measurements. With the addition of MB mediator, the ionic conductivity of gel polymer electrolyte increased by 56% up to 36.3 mS·cm^?1, and the series resistance reduced, because of the more efficient ionic conduction and higher charge transfer rate, respectively. The electrode specific capacitance of the supercapacitor with PVA‐PVP‐H₂SO₄‐MB electrolyte is 328 F·g^?1, increasing by 164% compared to that of MB‐undoped system at the same current density of 1 A·g^?1. Meanwhile, the energy density of the supercapacitor increases from 3.2 to 10.3 Wh·kg^?1. The quasi‐solid‐state supercapacitor showed excellent cyclability over 2000 charge/discharge cycles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39784.     

Novel amphiphilic polymer gel electrolytes based on (PEG‐b‐GMA)‐co‐MMA

Amphiphilic conetwork–structured copolymers containing different lengths of ethylene oxide (EO) chains as ionophilic units and methyl methacrylate (MMA) chains as ionophobic units were prepared by free radical copolymerization and characterized by FTIR and thermal analysis. Polymer gel electrolytes based on the copolymers complexed with liquid lithium electrolytes (dimethyl carbonate (DMC) : diethyl carbonate (DEC) : ethylene carbonate (EC) = 1 : 1 : 1 (W/W/W), LiPF₆ 1.0M) were characterized by differential scanning calorimetry and impedance spectroscopy. A maximum ion conductivity of 4.27 × 10^?4 S/cm at 25^oC was found for the polymer electrolyte based on (PEG2000‐b‐GMA)‐co‐MMA with long EO groups. Moreover, the effect of temperature on conductivity of the amphiphilic polymer electrolytes obeys the Arrhenius equation. The good room temperature conductivity of the polymer electrolytes is proposed to relate to the enhancement in the amorphous domain of the copolymers due to their amphiphilic conetwork structure. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Application of polymer gel electrolyte with graphite powder in quasi‐solid‐state dye‐sensitized solar cells

A polymer gel electrolyte with ionic conductivity of 5.11 mS cm⁻¹ was prepared by using poly (acrylonitrile‐co‐styrene) as polymer matrix, acetonitrile and tetrahydrofuran as binary organic mixture solvent, NaI + I₂ as electrolyte, graphite powder and 1‐methylimidazole as additives. The components ratio of the polymer gel electrolyte was optimized, and the influence of the components and temperature on the ionic conductivity of the polymer gel electrolyte and photoelectronic properties of dye sensitized solar cell were investigated. On the basis of the polymer gel electrolyte with the optimized conditions, a quasi‐solid‐state dye‐sensitized solar cell was fabricated and its light‐ to‐electricity energy conversion efficiency of 3.25% was achieved under irradiation of 100 mW cm⁻². POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

1H NMR,thermal, and conductivity studies on PVAc based gel polymer electrolytes

The lithium‐ion conducting gel polymer electrolytes (GPE), PVAc‐DMF‐LiClO₄ of various compositions have been prepared by solution casting technique. ¹H NMR results reveal the existence of DMF in the gel polymer electrolytes at ambient temperature. Structure and surface morphology characterization have been studied by X‐ray diffraction analysis (XRD) and scanning electron microscopy (SEM) measurements. Thermal and conductivity behavior of polymer‐ and plasticizer‐salt complexes have been studied by differential scanning calorimetry (DSC), TG/DTA, and impedance spectroscopy results. XRD and SEM analyses indicate the amorphous nature of the gel polymer‐salt complex. DSC measurements show a decrease in T_g with the increase in DMF concentrations. The thermal stability of the PVAc : DMF : LiClO₄ gel polymer electrolytes has been found to be in the range of (30–60°C). The dc conductivity of gel polymer electrolytes, obtained from impedance spectra, has been found to vary between 7.6 × 10^?7 and 4.1 × 10^?4 S cm^?1 at 303 K depending on the concentration of DMF (10–20 wt %) in the polymer electrolytes. The temperature dependence of conductivity of the polymer electrolyte complexes appears to obey the VTF behavior. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Solid‐state single‐ion conducting comb‐like siloxane copolymer electrolyte with improved conductivity and electrochemical window for lithium batteries

Achievement of high conductivity and electrochemical window at ambient temperature for an all‐solid polymer electrolyte used in lithium ion batteries is a challenge. Here, we report the synthesis and characterization of a novel solid‐state single‐ion electrolytes based on comb‐like siloxane copolymer with pendant lithium 4‐styrenesulfonyl (perfluorobutylsulfonyl) imide and poly(ethylene glycol). The highly delocalized anionic charges of ? SO₂? N^(–)? C₄F₉ have a weak association with lithium ions, resulting in the increase of mobile lithium ions number. The designed polymer electrolytes possess ultra‐low glass transition temperature in the range from ?73 to ?54 °C due to the special flexible polysiloxane. Promising electrochemical properties have been obtained, including a remarkably high conductivity of 3.7 × 10^?5 S/cm and electrochemical window of 5.2 V (vs. Li⁺/Li) at room temperature. A high lithium ion transference number of 0.80, and good compatibility with anode were also observed. These prominent characteristics endow the polymer electrolyte a potential for the application in high safety lithium ion batteries. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45848.     

Studies of solvent effect on the conductivity of 2‐mercaptopyridine‐doped solid polymer blend electrolytes and its application in dye‐sensitized solar cells

Solvents and electrolytes play an important role in the fabrication of dye‐sensitized solar cells (DSSCs). We have studied the poly(ethylene oxide)‐poly(methyl methacrylate)‐KI‐I₂ (PEO‐PMMA‐KI‐I₂) polymer blend electrolytes prepared with different wt % of the 2‐mercaptopyridine by solution casting method. The polymer electrolyte films were characterized by the FTIR, X‐ray diffraction, electrochemical impedance and dielectric studies. FTIR spectra revealed complex formation between the PEO‐PMMA‐KI‐I₂ and 2‐mercaptopyrindine. Ionic conductivity data revealed that 30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂ electrolyte can show higher conductivity (1.55 × 10^?5 S cm^?1) than the other compositions (20, 40, and 50%). The effect of solvent on the conductivity and dielectric of solid polymer electrolytes was studied for the best composition (30% 2‐mercaptopyridine‐doped PEO‐PMMA‐KI‐I₂) electrolyte using various organic solvents such as acetonitrile, N,N‐dimethylformamide, 2‐butanone, chlorobenzene, dimethylsulfoxide, and isopropanol. We found that ac‐conductivity and dielectric constant are higher for the polymer electrolytes processed from N,N‐dimethylformamide. This observation revealed that the conductivity of the solid polymer electrolytes is dependent on the solvent used for processing and the dielectric constant of the film. The photo‐conversion efficiency of dye‐sensitized solar cells fabricated using the optimized polymer electrolytes was 3.0% under an illumination of 100 mW cm^?2. The study suggests that N,N‐dimethylformamide is a good solvent for the polymer electrolyte processing due to higher ac‐conductivity beneficial for the electrochemical device applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42489.     

Solid polymer electrolytes. XI. Preparation,characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical‐covalent polyether–siloxane hybrids

A new hybrid polymer electrolyte system based on chemical‐covalent polyether and siloxane phases is designed and prepared via the sol–gel approach and epoxide crosslinking. FT‐IR, ¹³C solid‐state NMR, and thermal analysis (differential scanning calorimetry (DSC) and TGA) are used to characterize the structure of these hybrids. These hybrid films are immersed into the liquid electrolyte (1M LiClO₄/propylene carbonate) to form plasticized polymer electrolytes. The effects of hybrid composition, liquid electrolyte content, and temperature on the ionic conductivity of hybrid electrolytes are investigated and discussed. DSC traces demonstrate the presence of two second‐order transitions for all the samples and show a significant change in the thermal events with the amount of absorbed LiClO₄/PC content. TGA results indicate these hybrid networks with excellent thermal stability. The EDS‐0.5 sample with a 75 wt % liquid electrolyte exhibits the ionic conductivity of 5.3 × 10^?3 S cm^?1 at 95°C and 1.4 × 10^?3 S cm^?1 at 15°C, in which the film shows homogenous and good mechanical strength as well as good chemical stability. In the plot of ionic conductivity and composition for these hybrids containing 45 wt % liquid electrolyte, the conductivity shows a maximum value corresponding to the sample with the weight ratio of GPTMS/PEGDE of 0.1. These obtained results are correlated and used to interpret the ion conduction behavior within the hybrid networks. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1000–1007, 2006     

Energetics and Structure of Polymer‐Derived Si–(B–)O–C Glasses: Effect of the Boron Content and Pyrolysis Temperature

The structure and properties of polymer‐derived Si–(B–)O–C glasses have been shown to be significantly influenced by the boron content and pyrolysis temperature. This work determined the impact of these two parameters on the thermodynamic stability of these glasses. High‐temperature oxide melt solution calorimetry was performed on a series of amorphous samples, with varying boron contents (0–7.7 at.%), obtained by pyrolysis of precursors made by a sol–gel technique. Thermodynamic analysis of the calorimetric results demonstrated that at a constant pyrolysis temperature, adding boron makes the materials energetically less stable. While the B‐containing glasses pyrolyzed at 1000°C were energetically less stable than the competitive crystalline components, increasing the pyrolysis temperature to 1200°C led to their enthalpic stability. ²⁹Si and ¹¹B MAS nuclear magnetic resonance (NMR) spectroscopy measurements on selected samples confirmed a decrease in the concentrations of mixed Si‐centered SO_iC_4?i and B‐centered BO_jC_3?j bonds at the expense of formation of SiO₄ and B(OSi)₃ species (indicating a tendency toward phase separation) when the boron content and pyrolysis temperature increased. In light of the findings from calorimetry and NMR spectroscopy, we propose a structure–energetic relationship in Si–(B–)O–C glasses.     

Synthesis and characterization of proton conducting polymer electrolyte based on poly(N‐vinyl pyrrolidone)

This work aims at developing and characterizing a proton conducting polymer electrolyte based on Poly(N‐vinyl pyrrolidone) (PVP) doped with ammonium bromide (NH₄Br). Proton conducting polymer electrolytes based on PVP doped NH₄Br in different molar ratios have been prepared by solution casting technique using distilled water as solvent. The XRD pattern confirms the dissociation of salt. The FTIR analysis confirms the complex formation between the polymer and the salt. The conductivity analysis shows that the polymer electrolyte with 25 mol % NH₄Br has the highest conductivity equal to 1.06 × 10^?3 S cm^?1 at room temperature. Also it has been observed that the activation energy evaluated from the Arrhenius plot is low (0.50 eV) for 25 mol % NH₄Br doped polymer electrolyte. The influence of salt concentration on dc conductivity and activation energy of the polymer electrolyte has been discussed. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(methylmethacrylate)—magnesium triflate gel polymer electrolyte for solid state magnesium battery application

A gel polymer electrolyte (GPE) film of poly(methylmethacrylate) and magnesium triflate is studied in view of its potential application in a solid state rechargeable magnesium battery. Experimental data of a.c. impedance and cyclic voltammetric studies of symmetrical cells made of blocking and non-blocking electrodes, and also data of charge/discharge cycles of Mg/GPE/MnO₂ cells are reported. The composition of the GPE is optimized in view of a minimum quantity of the liquid components (propylene carbonate and ethylene carbonate) required for the gel formation and a maximum conductivity. Specific conductivity (σ) of the GPE of optimum composition is (4.2±0.45)×10⁻⁴ S cm⁻¹ at 20 °C. The σ values follow the Arrhenius equation and the activation energy for GPE of optimum composition is 0.038 eV. The effects of temperature and ageing on Mg/GPE interface are studied. Discharge capacity of about 90 mAh g⁻¹ of MnO₂ is obtained during the discharge of Mg/GPE/MnO₂ cells. On repeated charge/discharge cycling of the cell, the discharge capacity decreases to about 70 mAh g⁻¹. The cycle-life is limited by the problems associated with passivation of the Mg surface.     

The electrical properties of boron‐containing poly(vinyl alcohol) derived ceramic organic semiconductor

The direct and alternating current conductivity, space charge limited current, and thermoelectrical properties of boron‐containing poly(vinyl alcohol)‐derived ceramic have been investigated. The electrical conductivity of the sample increases with increase in temperature and the room temperature conductivity of the sample was found to be 3.82 × 10^?5 S/cm. The electrical conductivity and thermoelectric power results suggest that the PVAB polymer has p‐type electrical conductivity. The current–voltage characteristics indicate that at higher voltages, the space charge limited conductivity mechanism is dominant in the PVAB sample. The electronic parameters such as the position of the Fermi level bottom of the conduction band, E_F, the density of states in conduction band N_c, effective mass of holes m_s were found to be 0.44 eV, 2.12 × 10²⁵ m^?3, and 0.59 m_o, respectively. Alternating current conductivity results suggest that the correlated barrier hopping conductivity is dominant in AC conductivity mechanism of the sample. The imaginary part of the dielectrical modulus at different temperatures shows a relaxation peak, indicating a temperature‐dependent non‐Debye relaxation. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Preparation of PAA‐g‐PEG/PANI polymer gel electrolyte and its application in quasi solid state dye‐sensitized solar cells

A microporous hybrid polymer of poly(acrylic acid)‐g‐poly(ethylene glycol)/polyaniline (PAA‐g‐PEG/PANI) is synthesized by a two‐step solution polymerization method. The influence of aniline concentration on the conductivity of PAA‐g‐PEG/PANI gel electrolyte is discussed, when the concentration of aniline is 0.66 wt%, the conductivity of PAA‐g‐PEG/PANI gel electrolyte is 11.50 mS cm^?1. Using this gel electrolyte as host, a quasi solid state dye‐sensitized solar cell (QS‐DSSC) is assembled. The QS‐DSSC based on this gel electrolyte achieves a power conversion efficiency of 6.38% under a simulated solar illumination of 100 mW cm^?2 (AM 1.5). POLYM. ENG. SCI., 55:322–326, 2015. © 2014 Society of Plastics Engineers     

Hypercrosslinked silole‐containing microporous organic polymers with N‐functionalized pore surfaces for gas storage and separation

Novel hypercrosslinked microporous organic polymers (MOPs) derived from N‐functionalized siloles as basic building units have been designed and synthesized via Friedel–Crafts alkylation reaction. The resulting N‐functional silole‐containing polymer networks exhibit high thermal stabilities and moderate Brunauer–Emmett–Teller surface area ranging from 666 to 1137 m² g^?1. The incorporation of carbazole or triphenylamine moieties into the polymer skeleton increases the number of electron donating basic nitrogen sites in the porous frameworks. Thus, the corresponding polymer PDMCzS shows enhanced CO₂ adsorption capacities of 3.23 mmol g^?1 at 273 K and 1.13 bar, and higher CO₂/N₂ selectivity (43.99) at 273 K than the analogous silole‐containing polymers P1–P3. These results demonstrated that the N‐functionalized silole‐containing polymer network is a very promising candidate for potential applications in post‐combustion CO₂ capture and sequestration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45907.     

Ionic conductivity and morphology of semi‐interpenetrating‐type polymer electrolyte entrapping poly(siloxane‐g‐allyl cyanide)

We prepared a semi‐IPN (interpenetrating network)‐type solid polymer electrolyte (SPE) using poly (ethylene glycol)dimethacrylate (PEGDMA) as a polymer matrix containing a monocomb‐type poly(siloxane‐g‐allyl cyanide) and poly(ethylene glycol)dimethylether (PEGDME) for the lithium secondary battery. The poly(siloxane‐g‐allyl cyanide)s were prepared by a hydrosilation reaction of poly (methyl hydrosiloxane) with allyl cyanide and characterized by ¹H NMR and FTIR. The semi‐IPN‐type electrolyte was prepared by thermal curing, and conductivities of samples were measured by impedance spectroscopy using an indium tin oxide (ITO) electrode. The ionic conductivity of the semi‐IPN‐polymer electrolyte was about 1.05 × 10^?5 S cm^?1 with 60 wt % of the poly(siloxane‐g‐allyl cyanide) and 6.96 × 10^?4 S cm^?1 with 50 wt % of the PEGDME and 10 wt % of the poly(siloxane‐g‐allyl cyanide) at 30°C. The SEM morphology of the cross section of the semi‐IPN‐polymer electrolyte film was changed from discontinuous network to continuous network as increasing the PEGDME content and decreasing the poly(siloxane‐g‐allyl cyanide) content. The mechanical stability was also enhanced when increasing the PEGDME content. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Biopolymer agar‐agar doped with NH4SCN as solid polymer electrolyte for electrochemical cell application

A new polymer electrolyte based on the biopolymer Agar‐Agar doped with ammonium thiocyanate (NH₄SCN) has been prepared and characterized by FTIR analysis, X‐ray diffraction measurements, AC impedance spectroscopy, transference number measurements, and DSC analysis. The Fourier transform infrared analysis confirms the complex formation between agar and NH₄SCN. The amorphous nature of the polymer electrolyte has been revealed from X‐ray diffraction analysis. The highest ionic conductivity has been observed for the sample of composition 1:1 between Agar and NH₄SCN. As a function of temperature, the ionic conductivity of this sample exhibits Arrhenius behavior increasing from 1.03 × 10^?3 S cm^?1 at ambient temperature to 3.16 × 10^?3 S cm^?1 at 343 K. The transference number has been estimated by the dc polarization method, and it has been proven that the conducting species are predominantly cations. Using the highest conductivity polymer electrolyte, solid state electrochemical cell has been fabricated and cell parameters are reported. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44702.     

Chemically Modified Polyvinyl Butyral Polymer Membrane as a Gel Electrolyte for Lithium Ion Battery Applications

A novel porous membrane of chemically modified polyvinyl butyral (mPVB), with improved thermal properties and chemical stability for lithium ion battery applications, is successfully synthesized by utilizing the chain extension reaction of the OH units from PVB. The porous mPVB membranes are obtained via the tape casting and phase inversion method. The corresponding gel polymer electrolyte (GPE) is achieved by immersing the as‐prepared membranes in the liquid electrolyte. The electrochemical performances of the GPE show that the mPVB membranes have the features of good uniformity, high porosity ( ≈ 90%), great thermal stability, and high mechanical strength. Moreover, the GPE exhibits good chemical stability, a wide electrochemical window, as well as high ionic conductivity ( ≈ 1.21 × 10^?3 S cm^?1). A test of a Li/GPE/LiFePO₄ battery cell shows a capacity of 147.7 mAh g^?1 and excellent cycling stability, demonstrating the great potential of the mPVB‐based GPE for lithium ion battery applications.