Response of differently axially excited spinning liquid columns

Summary A solidly rotating finite liquid column consisting of frictionless liquid is subjected to various axial excitation modes. The response of the free liquid surface displacement and velocity distribution has been determined in the elliptic (>2₀) and hyperbolic range (<2₀). Differences of the various cases are presented.List of symbols a radius of liquid bridge - h length of liquid bridge - I ₀,I ₁ modified Besselfunctions - J ₀,J ₁ Besselfunctions - p liquid pressure - r, ,z cylindrical polar coordinates - t time - u, v, w velocity distribution in rotating liquid - axial excitation amplitude - elliptic case (>2₀) - hyperbolic case (<2₀) - liquid density - surface tension - liquid surface displacement - _n damping factor - phase angle - acceleration potential - ₀ rotational speed - , ₁,₂ axial forcing frequency - natural frequency of rotating system - _0n natural frequency of harmonic axial response     

Thermodynamic properties of superconducting niobium

The thermodynamic properties of superconducting Nb are calculated numerically from the solution of the Eliashberg equations on the imaginary axis for several possible electron-phonon spectral densities ²()F(). Comparison with experiment is made in order to see which spectrum gives the best agreement, and functional derivatives with respect to ²()F() are used to estimate how this agreement might be improved by small changes in ²()F(). Possible gap anisotropy effects are also considered with the help of a simple model anisotropy for the interaction.Research supported by Natural Science and Engineering Research Council of Canada.     

Response of a spinning liquid column to pitch excitation

Summary The response of a solidly rotating liquid bridge consisting of inviscid liquid is determined for pitch excitation about its undisturbed center of mass. Free liquid surface displacement and velocity distribution has been determined in the elliptic (>2₀) and hyperbolic (<2₀) excitation frequency range.List of symbols a radius of liquid column - h length of column - I ₁ modified Besselfunction of first kind and first order - J ₁ Besselfunction of first kind and first order - r, ,z cylindrical coordinates - t time - u, v, w velocity distribution in radial-, circumferential-and axial direction resp. - mass density of liquid - free surface displacement - velocity potential - ₀ rotational excitation angle - ₀ velocity of spin - forcing frequency - _1n natural frequency - surface tension - acceleration potential - for elliptic range >2₀ - for hyperbolic range >2₀     

Electron-phonon coupling as a mechanism for high-temperature superconductivity

We have solved the Eliashberg gap equations which are valid for arbitrary phonon frequency, (_ph), electron-phonon coupling constant, (), and screened Coulomb interaction, ( ^*). We have used values of (_ph),, and ( ^*) appropriate to the cuprate superconductors, and calculated the density of states, the pair potential., and the value of the gap at T=0 K. Using the linearized Eliashberg equations in the matrix representation, we have calculatedT _c and 2/k T _c . We have found that we can account for the highT _c 's in the cuprates with reasonable values for, ^*, and _ph.     

Surface waves in a rotating fluid due to sources and internal boundaries

Summary The problem of surface waves generated by an oscillatory point source oscillating with frequency in a fluid rotating with constant angular velocity has been investigated. The Green's function solution is obtained for an unbounded region and a region bounded internally by a circular cylinder using an appropiate Fourier transform. It is seen that in the case when >2, the surface waves are similar to the ones existing in a potential flow but when <2, the surface waves correspond to the inertial waves which are generated entirely due to rotation and have no counterpart in a non-rotating fluid motion.

---

Oberflächenwellen in einer rotierenden Flüssigkeit als Folge von Quellen und Randbedingungen

Zusammenfassung Es wird das Problem der Erzeugung von Oberflächenwellen durch eine oszillierende Punktquelle (Frequenz ) in einer rotierenden Strömung (Winkelgeschwindigkeit ) untersucht. Die Greensche Funktion wird für einen unbegrenzten Bereich sowie für das Äußere eines Kreiszylinders durch eine geeignete Fouriertransformation hergeleitet. Für >2 sind die Oberflächenwellen ähnlich denen einer Potentialströmung, für <2 ergeben sich Wellen, die vollständig durch die Drehbewegung bedingt sind und die kein Gegenstück im nichtrotierenden Fall besitzen.

     

Response of a spinning liquid column to axial excitation

Summary The response of a solidly rotating finite liquid column consisting of frictionless liquid is subjected to axial harmonic excitation. The response of the free liquid surface elevation and velocity distribution has been determined in the elliptic (>2 ₀) and hyperbolic frequency range (>2 ₀).Notation a radius of liquid bridge - h length of liquid bridge - I ₀,I ₁ modified Besselfunctions - J ₀,J ₁ Besselfunctions - P liquid pressure - r, ,z cylindrical polar coordinates - t time - u, v, w velocity distribution in rotating liquid - axial excitation amplitude - elliptic case (>2 ₀) - hyperbolic case (>2 ₀) - liquid density - surface tension - liquid surface displacement - acceleration potential - ₀ rotational speed - axial forcing frequency - natural frequency of rotating system - _02n –1 natural frequency of harmonic axial response With 8 Figures     

Axisymmetric stagnation-point flow impinging on a transversely oscillating plate with suction

The viscous fluid motion generated by axisymmetric stagnation-point flow of strain rate a impinging on a flat plate oscillating in its own plane with velocity amplitude U0 and frequency , including uniform suction of strength W0 is considered. A coordinate decomposition transforms the full Navier-Stokes equations into a primary equation describing the steady flow and a secondary equation describing the unsteady motion coupled to the primary solution. The solution to the boundary-value problem is governed by two dimensionless groups: the suction parameter S = W0 a and the frequency parameter = /a, where is the kinematic viscosity. Numerical integrations performed with a Runge-Kutta routine provide an exact solution to the Navier-Stokes equations. Values of the steady shear stress are found to agree with asymptotic results for large values of |S|, with S>0 representing suction and S<0 representing blowing. The magnitude and phase of the unsteady shear stress are given over a range of frequencies sufficient to recover analytical asymptotic results at large values of . The unsteady shear stress lags the wall motion by radians for 0 and by 5/4 radians when . Velocity profiles at selected parameter values during a period of plate oscillation are presented and discussed.     

A.c. conductivity for amorphous TeO2-P2O5 glass system

The a.c. conductivity for the TeO₂-P₂O₅ glassy system was measured in the temperature range 300–573 K and in the frequency range 100 Hz to 10 kHz. The a.c. conductivity () increased with frequency according to the relation ()^s. The frequency exponent s was found to decrease with increasing temperature. The composition dependence of the conductivity was also investigated. The density of states was also calculated using the Elliott model. The a.c. conductivity increased over the studied temperature range. The obtained experimental data have been analysed with reference to various theoretical models. The analysis shows that the correlated barrier hopping (CBH) model is the most appropriate mechanism for conduction in the TeO₂-P₂O₅ glass system.     

Longitudinal dielectric function and collective surface oscillations in superconductors

The electrodynamic approach to the problem of collective oscillations in superconductors is considered. The kinetic equation for quasiparticles is used to find the longitudinal dielectric function ₁ (, k) of a pure superconductor at ( is the collision frequency). With the help of the evaluated ₁ (, k) the existence of collective oscillations localized near the boundary of the superconductor is investigated.     

Natural frequencies and response of spinning liquid column with apparently sliding contact line

Summary The contact line of a liquid with a solid does in many cases—depending on the smoothness of the solid, the viscosity, the surface tension and the excitation force—apparently flow along the solid during oscillations. The influence of this effect upon the natural frequencies, the stability and the response of the system has been investigated at an oscillating and spinning cylindrical liquid column.List of symbols a radius of liquid bridge - h length of liquid bridge - I ₀,I ₁ modified Besselfunctions - J ₀,J ₁ Besselfunctions - p liquid pressure - r, ,z cylindrical polar coordinates - t time - u, v, w velocity distribution in rotating liquid - Weber number - axial excitation amplitude - elliptic case ( > 2 ₀) - hyperbolic case ( > 2 ₀) - liquid density - surface tension - liquid surface displacement - acceleration potential - ₀ rotational speed - axial forcing frequency - natural frequency of rotating system - _on natural frequency of harmonic axial response     

Paramagnetic resonance in a “dirty” spin-glass

For a spin-glass with nonmagnetic defects (n _m ^1/3l 1, where n _m is the magnetic impurity concentration and l is the mean free path) an absorption function () is derived. Three ranges of temperature and external magnetic field are considered. In the vicinity of the transition the value of () d is estimated as a function of temperature and field.     

Superconducting state in M3C60: Strong vs. weak coupling

The superconducting state in the doped fullerenes is due to strong coupling (e.g.,2.1 for Rb₃C₆₀) to low-frequency intramolecular modes _L 250 cm^–1 (^21/2). The analysis is based on an equation describingT _c for any strength of the coupling and on recent isotope effect and NMR data.     

Hot electrons in metals at low temperatures

Hot electrons in metals at helium temperatures under steady conditions can be produced by passing an electric current of moderate density ( 10⁶ A/cm²) through thin, narrow (~1 m wide) metallic films in good thermal contact with bulk single-crystal dielectric substrates. This paper is concerned with the theory of hot electrons in normal metals at low temperatures (when _D, where is the average electron energy and _D is the Debye temperature). The theory is formulated in terms of realistic electron and phonon dispersion laws, taking into account the experimental possibility of heat removal from the sample. In the case in which the temperature approximation of Kagnov, Lifshitz, and Tanatarov is not satisfied when elastic scattering of electrons is dominant in a steady state electric field, the kinetic equation is derived for the energy-dependent, hot electron distribution function, which determines the associated nonlinear responses. The solution of this equation is discussed for a simple model. It is shown that the experimental information on the electron-phonon interaction in a metal can be obtained in terms of the well-known spectral functions S() ² F() and g() _tr ² F(). This is illustrated by experiments determining the nonlinear field dependence of the resistance, by tunnel experiments, and by critical current hysteresis measurements (for superconducting metals). Theoretical estimates which support the observability of the effects under discussion are presented.     

On the maximum reduced upper critical magnetic field in Eliashberg theory

Consideration of the functional derivative of the zero-temperature reduced upper critical magnetic fieldh _c2(0) with electron-phonon spectral density ² F() suggests that its value can be maximized, for a given areaA under ² F(), with the choice of a delta-function spectral density. We show thath _c2(0) is then independent ofA and that it increases steadily as the Einstein frequency _E of the delta function is lowered. We argue that there is a local maximum inh _c2(0) at _E=0. The value at maximum is very sensitive to impurity content and increases sharply from a clean-limit value of 1.5 atT _c /_E=1.33 to more than 3.45 in the dirty limit.     

Amplifier based on a field-effect triode with negative current feedback

Conclusions A field-effect triode amplifier with series negative current feedback allows a voltage gain of the order of 200–300 to be obtained for a load resistance R_s1 M. The coefficient K_u begins to decrease noticeably only for a feedback resistance above 500 .The current gain reaches (8–10)·10³. Increasing the resistances R_s and R_L to hundreds of ohms has practically no effect on K_i. For a further increase of R_s and R_L the coefficient K_i decreases.The power gain reaches its maximum value (of the order of 10⁴ or more) for R_s100 and R_L=10–100 k. An increase in R_s leads to a reduction of K_pmax and to a shift of the extremum of the function K_p=f(R_L) into the range of higher values of R_L.A large input resistance of the amplifier (tens of megohms and higher) is obtained when R_s increases to 10–100 M. The maximum input resistance is obtained for R_L and R_s and may exceed values of from hundreds of megohms to several gigaohms. The minimum input resistance is hundreds of kilohms for R_L and R_s0.The minimum input resistance (5–10 k or less) is ensured for R_g and R_L0. An increase of the output resistance to hundreds of megohms or higher occurs for R_g and R_s.Translated from Izmeritel'naya Tekhnika, No. 9, pp. 67–70, September, 1971.     

Axi-symmetric natural frequencies and response of a spinning liquid column under strong surface tension

Summary The response of a solidly rotating anchored finite liquid column consisting of frictionless liquid is subjected to axial harmonic excitation. The response of the free liquid surface elevation and velocity distribution has been determined analytically in the elliptic (>2 ₀) and hyperbolic frequency range (>2 ₀). For the liquid surface displacement the response has been evaluated numerically as a function of the forcing frequency/2 ₀. In addition the first natural stuck-edge frequency has been determined and compared with the slipping case.List of symbols a radius of liquid bridge - h length of liquid bridge - I ₀,I ₁ modified Besselfunctions - J ₀,J ₁ Besselfunctions - p liquid pressure - r, ,z cylindrical polar coordinates - t time - u, v, w velocity distribution in rotating liquid - Weber number - z₀ axial excitation amplitude - elliptic case (>2 ₀) - hyperbolic case (>2 ₀) - liquid density - surface tension - liquid surface displacement - acceleration potential - ₀ rotational speed - axial forcing frequency - natural frequency of rotating system - _0n natural frequency of harmonic axial response     

An indenter moving on an anisotropic elastic half-space

Summary The problem is considered of a semi-infinite homogeneous anisotropic elastic solid deformed in plane strain by an indenter moving steadily over its surface. General expressions are derived for the components of stress throughout the medium for arbitrary anisotropy of the elastic modulus tensor. It is shown that the distribution of normal traction under the indenter and the normal displacement of the free surface outside the region of contact depend on the elastic modulus components and the velocity of the indenter through a single constant, denoted by . A simple, practical method of calculating is presented.The solutions are examined in detail for the case of orthotropic materials and analytical expressions are given for and for the complete stress distribution throughout the medium in this case. Representative numerical results are presented graphically to illustrate the angular variations of the scaled radial shear and tangential stress components near the edge of the punch.

---

Ein bewegter Stempel auf einem anisotropen elastischen Halbraum

Zusammenfassung Das Problem eines homogenen, anisotropen, elastischen Halbraumes, auf dessen Oberfläche sich ein Stempel stetig bewegt, wird betrachtet. Allgemeine Ausdrücke werden für die Spannungskomponenten im Körper für beliebige Anisotropie des Elastizitätsmodultensors abgeleitet. Es wird gezeigt, daß die Normaldruckverteilung unter dem Stempel und die Normalverschiebung der freien Oberfläche außerhalb des Kontaktbereiches von den Elastizitätsmodulkomponenten und der Stempelgeschwindigkeit durch eine einzige Konstante, bezeichnet mit , abhängen. Eine einfache praktische Methode zur Bestimmung von wird angegeben.Die Lösungen werden für den Fall eines orthotropen Materials bestimmt, und die analytischen Ausdrücke für und für die Spannungsverteilung im Körper für diesen Fall angegeben. Numerische Ergebnisse werden graphisch angegeben zur Darstellung der Radialschub-und Tangentialspannungskomponenten in der Nähe der Stempelspitze.

---

---

With 2 Figures     

Transient two-dimensional diffusion along a high-diffusivity lamina which bisects a half-space

Summary The right half-space is bisected by a high-diffusivity planar sheet which lies along the x-axis. A sudden increase in the potential on (y-axis) causes longitudinal diffusion along coupled with transverse diffusion from into . Restricting to the case of large diffusivity ratio, to , it is demonstrated that the problem possesses a sequence of three distinct time domains in which self-similar solutions become asymptotically valid. The early, intermediate, and late solutions are each functions of only two independent variables; they are universally valid for all parameter values; and they are easily computed and readily applied. Transitions between asymptotics are described by expansions in time, the perturbations being regular in the early-intermediate period but singular in the intermediate-late period. The considered problem is a linear example which affords the opportunity for comparison with Fourier-Laplace analysis, and has application to thermal or electric conduction, diffusion mass transfer, and Darcy-flow of fluid in a fractured or layered porous medium. Methodology and qualitative observations are applicable to more complex nonlinear problems of the same class.This work supported by the U.S. Department of Energy under Contract DE-ACO4-76D00789.A U.S. DOE Facility.     

Effect of phase transitions in copper-germanium thin film alloys on their electrical resistivity

An investigation was carried out to study the phase transitions in Cu-Ge thin films (80–200 nm in thickness) containing 0, 5, 15, 20, 25, 30, 35, 40, 45 and 50 at% Ge, and the corresponding effects on electrical resistivity. For these films, the phase transitions were found to follow the sequence: -phase (disordered face centred cubic, fcc, solid solution); 5 at% Ge -phase (disordered hexagonal close packed, hcp); 15 at% Ge -phase + ₁-phase (ordered orthorhombic, Cu₃Ge); 20 at% Ge ₁-phase; 25 at% Ge (₁-phase + progressively increasing proportions of a disordered Ge-rich solid solution); 30–50 at% Ge. Germanium was found to have no marked effect on grain size of all films studied excluding grain boundaries as electron scattering centres. Transition of the -phase into the -phase was found to occur in a highly coherent manner, which could be related to the reduced stacking fault energy of Cu by the addition of Ge. Most evidence pointed out that the initial increase in resistivity within the -phase range was related to hcp scattering centres, which could be associated with a localized high concentration of Ge. At 15 at% Ge, the resistivity reached a maximum value of about 50 cm associated with the complete transformation of -phase into the -phase. With continued increase in Ge concentration, the resistivity was found to gradually decrease reaching a minimum value of about 10 at 25 at% Ge, which was correlated with complete transition of the -phase into the ordered ₁-phase (Cu₃Ge). It was shown that the superlattice of Cu₃Ge could directly be derived from the disordered -phase by minor atom rearrangement on the [0 0 0 1]_hcp plane. Even though, minor proportions of a Ge-rich solid solution containing a small concentration of Cu were formed at Ge concentrations above 25 at%, the minimum resistivity of 10 cm was maintained as the Ge concentration was increased to 35 at%. Subsequently, the resistivity was increased reaching about 46 cm at 50 at% Ge.     

Penetration depth and related properties of Al films with enhanced superconductivity

Using combined resistivity, susceptibility, critical field, and NMR measurements it was found that Al films with enhanced superconductivity can be divided into two separate categories depending on their residual resistivities ₀. Films with resistivities smaller than 10 ^–3 ·cm are metallic (_(300K)/ ₀ is larger than but very close to unity); the experimentally measured penetration depth, the upper critical field H, and the penetration field H_p are in good agreement with theoretically calculated values using an experimental value of the mean free path1 _eff. The density of states for such films as inferred from NMR measurements is very close to that of bulk. On the other hand, films with ₀ larger than 10 ^–3 ·cm have a semiconducting behavior ( ₃₀₀ K/ ₀ 1) and are grossly inhomogeneous. The experimental values of H no longer agree with the theoretical estimates using1 _eff. In such films ₀ is no longer a meaningful parameter that can be related to1 _eff, for it is to a large extent a tunneling resistivity as shown by the fact that films not superconducting down to 0.95 K, when measured resistively, are superconducting at 1.2 K, as shown by a susceptibility measurement. These experiments seem to indicate that in a homogeneous film1 _eff has a lower limit of approximately 1 Å.