Characterization of Cassava Starch Attributes of Different Genotypes

The genetic variation of starch of Indonesian cassava genotypes with various morphological characteristics of roots and eco‐geographical origin was characterized and compared. The morphological characteristics of the roots of 71 collected cassava genotypes were classified into yellow and white for flesh colors, purple, pink, light brown, yellow, cream and white for cortex colors, dark brown and light brown for external colors, as well as conical and cylindrical for root shapes. Starch samples extracted from 17 genotypes showed that the amylose content varied from 17.1 to 21.3%. The mean particle size was around 7.3 to 9.7 µm, and the gelatinization onset temperature was in the range of 63.5‐66.1°C. Seven genotypes were analyzed in more detail for their physicochemical properties. The granule size distribution was in the range of 3.2 µm to 17.6 µm for d10 and d90 (i.e. 90% of the granules were bigger than 3.2 μm and 90% were smaller than 17.6 μm), respectively, and the median granule size was around 7.7‐10.8 µm. The gelatinization temperatures of the different cassava starches were in the range of 63.5‐66.1°C. The phosphate content varied from 23.5‐25.3 nmol/mg starch. Particle size distribution and gelatinization temperature as well as the phosphate content of the starch of the selected seven genotypes also showed minor differences among the genotypes. The swelling power of all starches showed some differences between genotypes, but the profiles were similar. The opacity of starch of all the tested genotypes increased twofold within six days, but no large differences among the different genotypes could be detected except for the genotype Ketan. Strength of the gels, which are indicated with force, adhesiveness, cohesiveness, and elasticity, also did not show large differences.     

Isolation and characterization of Mexican jackfruit (Artocarpus heterophyllus L) seeds starch in two mature stages

Starch was isolated from jackfruit (Artocarpus heterophyllus L) seeds grown in México at different stages of fruit maturity and ripeness. Seeds represent about 8–15% from the fruit that can weigh around 2–36 kg. Proximate composition of seeds showed a high protein content (ca. 22%). Starch yield was 14% with a purity of 81% in both ripeness stages and AM content was lower (12.27%) than other non‐common starch sources. The starch granules in physiological mature (PM) and consumption ripeness (CR) jackfruit showed birefringence with diverse shapes such as semi‐oval or bell shapes. The size of starch granules for PM ranged between 3 and 9.5 µm and for CR between 3 and 12 µm. A‐type XRD pattern was similar to cereal starches. PM starch had higher peak viscosity than CR, but CR did not show breakdown; both starches presented setback during cooling. Thermal properties of gelatinization and retrogradation in PM and CR starches were similar. Characterization performed on this non‐common starch showed that it could be an alternative to use in food systems.     

Morphological,Thermal, Pasting,and Rheological Properties of Barley Starch and Their Blends

Native barley starch, as well as its blends with corn, wheat, and rice starch at different ratios of 75:25, 50:50, 25:75 were examined in terms of morphology, thermal, pasting, rheological, and retrogradation properties. Amylose content varied between 10.9–41.4% in rice, corn, wheat, and barley while it ranged from 18.02–38.40% in blends of barley starch with rice, corn, and wheat. A rapid visco analyzer showed that barley starch and its blends having low amylose content exhibited higher peak viscosity, breakdown, and setback than the high-amylose-containing starches and their blends. Amylose content was found to be negatively correlated with swelling power while it exhibited nonlinear relationship with solubility index. The transmittance of starch suspension stored at 4°C decreased during storage up to 6 days. Barley starch granules were largest (<110 μm) in size followed by wheat (<30 μm), corn (<25μm) and rice (<20μm) starches. Gelatinization temperatures (To, Tp, Tc) and enthalpies of gelatinization (ΔHgel) of starches from different sources also differed significantly. Corn and rice starches showed higher transition temperatures in general than those from wheat and barley; however, they showed higher ΔHgel values. Barley starch showed a higher tendency towards retrogradation than the cereal starches. Barley starch showed highest peak G′, G″ and lower tan Ð than corn, rice and wheat starches during the heating cycle. This study showed that the magnitude of changes in their properties during blending depends on the amylase content and morphological characteristics.     

不同直链淀粉含量对羟丙基氧化玉米淀粉性质的影响

本文采用蜡质玉米、普通玉米和高直链玉米淀粉为原料,改变有效氯添加量,制备羟丙基氧化淀粉,通过XRD、DSC、Brabender粘度仪等测定手段,研究不同直链淀粉含量对羟丙基氧化淀粉理化性质的影响。实验表明,直链淀粉含量对羟丙基化和氧化程度影响显著,其中直链淀粉含量高有利于羟丙基化,而不利于氧化;X-射线衍射分析发现,改性淀粉没有改变晶型,随氧化程度增加,淀粉分子结晶度下降,直链淀粉含量越高,下降趋势越缓;DSC测试和Brabender粘度分析表明,直链淀粉含量直接影响到羟丙基氧化淀粉糊化特性,糊化温度:高直链普通蜡质,糊粘度:蜡质普通高直链,糊化焓:蜡质普通高直链;通过观察淀粉的偏光特性和颗粒表面形态,发现直链淀粉含量越高,羟丙基氧化淀粉的偏光十字越弱,颗粒越不易破碎。     

Effect of Acid‐Methanol Treatment on the Physicochemical and Structural Characteristics of Cassava and Maize Starches

Physicochemical, structural and morphological characteristics of maize and cassava starches treated with 0.36% concentrated HCl in anhydrous methanol at 54ºC for 1–8 h were analyzed and compared. Average yield of modified starch was about 97% for both starches. The solubility of the acid‐methanol treated starches increased with temperature and after 3 h of treatment reached 93% for maize starch and 97% for cassava starch at 95ºC. After 8 h of treatment, the average size of the cassava starch granules decreased from 14.9 to 11.1 µm. The action of acid‐methanol on the maize starch was more subtle, reducing the granule average size from 11.8 to 11.3 µm. Scanning electron micrographs showed that the granule surfaces were rough and exfoliated after treatment suggesting exocorrosion that was more evident for cassava starch. From GPC, it was noted that amylose and amylopectin were partially degraded during treatment. Starch crystallinity gradually increased with duration of treatment. The amylose content decreased from 21.4 to 18.8% and from 26.3 to 23.0% and the intrinsic viscosity was reduced from 2.36 to 0.21 and from 1.85 to 0.04 for cassava and maize starches, respectively. The gelatinization temperatures increased whereas pasting viscosities decreased with reaction time, especially for cassava starch. These results suggested that the attack of acid‐methanol, which was more effective on cassava starch granules, occurred preferentially in the amorphous areas located in the granule periphery and composed of amylose and amylopectin.     

Chemical and Physical Properties of Kiwifruit (Actinidia deliciosa) Starch

Chemical and physical properties of kiwifruit (Actinidia deliciosa var. ‘Hayward’) starch were studied. Kiwifruit starch granules were compound, irregular or dome‐shaped with diameters predominantly 4–5 µm or 7–9 µm. Kiwifruit starch exhibited B‐type X‐ray diffraction pattern, an apparent amylose content of 43.1% and absolute amylose content of 18.8%. Kiwifruit amylopectins, relative to other starches, had low weight‐average molecular weight (7.4×10⁷), and gyration radius (200 nm). Average amylopectin branch chain‐length was long (DP 28.6). Onset and peak gelatinization temperatures were 68.9°C and 73.0°C, respectively, and gelatinization enthalpy was high (18.5 J/g). Amylose‐lipid thermal transition was observed. Starch retrograded for 7 d at 4°C had a very high peak melting temperature (60.7°C). Peak (250 RVU), final (238 RVU) and setback (94 RVU) viscosity of 8% kiwifruit starch paste was high relative to other starches and pasting temperature (69.7°C) was marginally higher than onset gelatinization temperature. High paste viscosities and low pasting temperature could give kiwifruit starch some advantages over many cereal starches.     

In vitro digestibility,pasting, and structural properties of starches from different cereals

Starches isolated from seven different cereals were evaluated for their composition, physicochemical, in vitro digestibility, structural, morphological, and pasting properties. The in vitro starch digestion rate and estimated glycemic index (GI) of cereal starches were evaluated along with the impact of cooking on starch digestion. The cooking of starch slurries increased the rapidly digestible starch content from a range of 34.7–54.4% to a range of 60.5–78.5%. On the basis of hydrolysis index, the GI ranged from 83.6 to 91.8 and after cooking it increased from 95.1 to 98.6 for different cereal starches. Both the swelling power and solubility showed an increasing trend with rising temperature. Paste clarity of starches negatively correlated with fat content. The amylose content of various starches ranged from 17.7 to 24.7% and was negatively correlated to crystalline index (r = -0.975, p ≤ 0.05). XRD pattern revealed A-type pattern of crystalline starch, where crystallinity index ranging between 28.2 to 44.9%. FTIR revealed slight differences among chemical bonding of starches from different cereals. From scanning electron micrograph observations, wheat and barley starch granules proved smoother as compared to other cereal granules. Barley contained the highest (27.5 µm) and rice had the lowest (10.2 µm) size starch granules. The pasting properties were significantly (p ≤ 0.05) different for different cereal starches. Peak, breakdown, and final viscosities were the highest for maize starch (1725, 384, and 2112 mPa.s, respectively), whereas rice and oats exhibited the highest trough and setback viscosities (1420 and 954 mPa.s, respectively).     

Physicochemical properties of high amylose rice starches purified from Korean cultivars

The physicochemical and pasting properties of high amylose rice starches isolated using alkaline steeping method from different Korean rice cultivars, Goamy2 and Goamy, and from imported Thai rice were examined. The protein and lipid contents of the Goamy2 starch were higher than those of the other two starches. The amylose and total dietary fiber contents were ranged from 31.4 to 36.8% and from 6.3 to 8.6%, respectively. Total dietary fiber was positively correlated to amylose content. Water binding capacity was higher in the Goamy2 starch (172.2%) than in the Goamy and Thai rice starches (112.7–115.6%). The swelling power of the Goamy2 starch showed lower values, but its value at 95°C was similar to others because of its rapid increment at 85°C. The granular size of Goamy2 starch was widely distributed compared to those of others. The Goamy2 starch showed a high initial pasting temperature (92.0°C) and low breakdown and setback viscosities. The Goamy and Thai rice starch granules were polygonal‐shaped with A‐type crystals, whereas the Goamy2 starch granules were round‐shaped with B‐type crystals. Goamy and Goamy2 starches showed a single endotherm at 60.8 and 76.0°C for peak temperature and 10.0 and 11.5 J/g for gelatinization enthalpies, respectively. The Thai rice starch presented an endotherm with a shoulder peak at 68.3°C (75.3°C for the main peak) and a gelatinization enthalpy of 12.4 J/g.     

A Comparison of mango kernel starch with a novel starch from litchi (Litchi chinensis) kernel: Physicochemical,morphological, pasting,and rheological properties

A novel starch was isolated from litchi kernel and compared with mango kernel starch. The properties studies were physicochemical, morphological, pasting, rheological, X-ray diffraction, and morphological. Litchi kernel starch had significantly (p < 0.05) higher amylose content and solubility, whereas its swelling power and paste clarity were lower than mango kernel starch. Peak viscosity and breakdown viscosity of litchi kernel starch were lower than mango kernel starch; however, it showed higher setback viscosity. The scanning electron microscopy revealed the presence of starch granules varying in size and shape from small to large and oval to elliptical, respectively, in litchi kernel starch. The mean length of small and large litchi starch granules was 9.52 and 50 µm, respectively, while the mean breadth of small and large litchi starch granules was 7.14 and 35.7 µm, respectively. X-ray diffractions of both litchi and mango kernel starches showed typical A-type patterns. During heating, litchi kernel starch showed higher peak G’ (storage modulus), G’’ (loss modulus), and breakdown in G’ in comparison to mango kernel starch. The peak tan δ of litchi and mango kernel starch was <1, which indicated that both litchi and mango kernel starches were more elastic than viscous.     

Effects of Heating,Vacuum Drying and Steeping on Gelatinization Properties and Dynamic Viscoelasticity of Various Starches

Starches having A‐ and B‐type X‐ray diffraction patterns (A‐ and B‐type starches) were modified by heating at 120 °C for 2 h (HT), vacuum drying at room temperature for 20 h (VD) and steeping at 50 °C for 20 h (ST). The properties of starches were compared using differential scanning calorimetry (DSC) and dynamic viscoelasticity behavior during heat processing (G' behavior). As observed by DSC, HT rarely changed the gelatinization properties for A‐type starches, but decreased the gelatinization temperatures and enthalpies (ΔH) for B‐type starches. A shift of the X‐ray diffractograms from B‐type to A‐type patterns was not detected after HT. Similar changes in gelatinization properties were observed for B‐type starches after VD. ST increased the gelatinization temperatures and also narrowed the gelatinization temperature range irrespective of crystal type. Both HT and VD decreased the peak temperature (T_p) in G' behavior and increased the peak G' value for B‐type starches. ST increased T_p and also decreased the peak G' value irrespective of starch crystal type. G' values after reaching T_p — which indicate the viscoelasticity of the swollen starch granules without breakdown — showed significant increases only for B‐type starches after HT.     

Properties of Korean Amaranth Starch Compared to Waxy Millet and Waxy Sorghum Starches

Characteristics of waxy type starches isolated from amaranth, waxy millet and waxy sorghum harvested in Korea were evaluated. Shapes of all starch granules were polygonal or slightly round and the surfaces of waxy millet and waxy sorghum starch granules showed visible pores. Amylose contents of the three starches were between 3.2–6.0% and amaranth starch showed the highest water binding capacity (WBC) (130.7%). The swelling power and solubility of amaranth starch studied at 65.0–95.0°C increased about 13.7‐ and 14.0‐fold, respectively, with increase in temperature. Swelling power of waxy sorghum starch was the highest (72.6 at 95°C) among the starches studied, while amaranth starch had a constant swelling power and its rate of solubility increasely only slowly at temperatures higher than 75°C. From RVA data, initial pasting temperatures of amaranth, waxy sorghum and waxy millet starches were 75.7, 73.3 and 75.2°C, respectively. Peak viscosity, breakdown, and setback from trough of amaranth starch were 68.3, 16.7 and 7.5 RVU, respectively, which were the lowest values among the starches investigated. Using DSC, onset temperature of gelatinization of amaranth starch was 1.5–4.0°C higher than those of waxy sorghum and millet starches, corresponding to the RVA result. The enthalpies of gelatinization of the starches studied in our laboratory were in the range of 8.5–12.7 J/g with decreasing order of waxy sorghum > amaranth > waxy millet starch.     

Isolation and characterization of Mexican chayote tuber (Sechium edule Sw.) starch

Starch was isolated from Mexican chayote tubers (Sechium edule Sw.) and the yield, physicochemical, rheological, and molecular characteristics were investigated. Commercial potato was used for comparison. Starch yield was 49% with a purity of 89.1%. AM content of chayote tuber starch was 26.3%. Birefringence was shown in chayote tuber starch and granules had diverse shapes such as spherical, oval, and polygonal, with size between 10 and 25 µm. B‐type XRD pattern was shown by chayote tuber starch. Chayote tuber starch had higher peak viscosity (PV) than potato starch and the maximum PV for chayote tuber starch was obtained at lower temperature. Flow properties of chayote tuber starch showed higher hysteresis than potato at the same concentration. In chayote tuber and potato starches, G′ > G″ at both temperatures. Chayote tuber starch presented slightly lower gelatinization temperatures, but slightly higher enthalpy of gelatinization than potato starch, and similar retrogradation rate (due to the enthalpy value of the phase transition) were found in both tuber starches. Chayote tuber starch presented higher Mw and Rz values than potato starch. Chayote tuber could be an alternative for starch isolation with specific physicochemical and molecular characteristics.     

Effect of Acetylation on Some Properties of Corn and Potato Starches

Corn starch and starches separated from different potato cultivars were acetylated to evaluate the effect of plant source on the physicochemical, morphological, thermal, rheological, textural and retrogradation properties of the starches. Corn starch showed a lower degree of acetylation than potato starches under similar experimental conditions. The degree of acetylation for different potato starches also differed significantly. Morphological examination revealed that the granules of acetylated Kufri Chandermukhi and Kufri Sindhuri starches tended to appear as fused and less smooth than native starch granules. Acetylation of corn and potato starches decreased the transition temperatures and enthalpy of gelatinization and increased swelling power and light transmittance. However, the change in these was greater in the potato starches with higher percentage of small sized granules. Acetylated starches showed higher peak G', G'' and lower tan δ than their counterpart native starches during heating. Among the starches from different cultivars, the change in the rheological parameters after acetylation differed to a significant extent. The retrogradation was observed to be negligible in the acetylated cooked starch pastes. Results implied that the change in functional properties of starches with acetylation depends on source and granule morphology of native starch.     

Effect of acid‐ethanol treatment followed by ball milling on structural and physicochemical characteristics of cassava starch

Structural and physicochemical characteristics of cassava starch treated with 0.36% HCl in anhydrous ethanol during 1 and 12 h at 30, 40, and 50°C followed by ball milling for 1 h were analyzed. Average yield of acid‐ethanol starches reached 98% independent of the treatment conditions. Solubility of acid‐ethanol starches increased with reaction temperature and time, but it did not change after ball milling. Granule average size reduced with chemical treatment from 25.2 to 20.0 µm after 12 h at 50°C. Ball milling decreased the granule average diameter of the native starch and those chemically treated at 30°C/1 h or 40°C/1 h, but it did not alter the starches treated for 12 h, independent of temperature. From scanning electron microscopy (SEM), starch granules presented round shape and after modification at 50°C/12 h, before and after ball milling, showed a rough and exfoliated surface. Some granules were deformed, suggesting partial gelatinization that was more intense after milling. Starch crystallinity increased as temperature and time of chemical treatment were increased, while amylose content, intrinsic, and pasting viscosities decreased. Gelatinization temperatures increased for all chemical starches. The findings can be related to the preferential destruction of amorphous areas in the granules, which are composed of amylose and amylopectin. After ball milling, the starch crystallinity decreased, amylose content, intrinsic, and pasting viscosities kept unchanged and gelatinization temperatures and enthalpy reduced. Ball milling on native and chemical starches caused the increase of amorphous areas with consequent weakening and decreasing of crystalline areas by breaking of hydrogen bonds within the granules.     

Quantification of Resistant Starch in Several Starch Sources Treated Thermally

The purpose of the research was to determine the effect of heat-moisture treatment at different phases and temperatures on resistance starch (RS) level on native starches samples of several botanical sources and to evaluate the thermal stability of different granules. Samples of potato, cassava, wheat, and corn starches were moisturized up to 30% wet basis and then treated in a convection oven at 80, 100, and 120°C during 40 and 60 minutes. RS was determined gravimetrically by a modification of Method 991.43 of the AOAC for the determination of total dietary fibre. All samples were submitted to different thermal analysis in a range from 40 to 180°C at 10°C/min. Overall, in the treated samples an increase of RS was observed, being the corn starch sample treated at 120°C and 60 minutes – the one that presented the highest content of RS (4.2%). Other treated samples showed a decrease in the gelatinization enthalpies with the presence of granular fusion, indicating internal re-arrangement, an increase in the gelatinization temperature and the thermo stability below 95°C.     

Proximate Composition of Triangular Pea,White Pea,Spotted Colored Pea,and Small White Kidney Bean and Their Starch Properties

Physicochemical properties of beans and starches extracted from triangular pea, white pea, spotted colored pea, and small white kidney bean grown in China were investigated. Results pointed out that each of the different legumes might be a good resource of starch and protein, which could be utilized for specific applications in food processing. Starches separated from different legumes differed significantly with respect to their protein content, amylose/amylopectin ratio, lipid content, ash content, swelling power, and solubility. The scanning electron micrographs revealed the presence of kidney or elliptical- to irregular-shaped granules and with a diameter ranging from 5 to 40 μm. All starches exhibited a C-type X-ray diffraction pattern. The pasting properties were tested in a Rapid Visco Analyser and thermal properties with a differential scanning calorimeter. Small white kidney bean had the highest peak, trough, breakdown, and final viscosity among various starches. Triangular pea starch showed the highest gelatinization transition temperatures (T _o, T _p, and T _c) and enthalpy of gelatinization, while white pea starch showed the lowest transition temperatures and gelatinization enthalpy. The results obtained provide a technical basis for processing these legumes and starches.     

Study on physicochemical characteristics of waxy potato starch in comparison with other waxy starches

The physicochemical properties of wx potato, wx corn, and wx rice starches were examined and compared. wx potato starch displayed the B‐type XRD pattern, whereas wx rice and wx corn displayed the A‐type. Shapes of wx potato starch were oval or slightly round, wx corn and wx rice starch granules were polygonal. AM contents of the three starches were between 1.0 and 1.5%. Rapid viscosity analyzer data showed initial pasting temperatures of wx potato, wx corn, and wx rice starches as 69.6, 75.4, and 76.8°C, respectively, peak viscosity, breakdown, and setback of wx potato starch were 2114, 1084, and 4 mPa s. Using DSC, onset temperature of gelatinization of wx potato starch was 5.5–7.2°C higher than those of wx rice and wx corn starches. The thermal enthalpies of the starches studied in our laboratory were in the range of 0.2268–1.9900 J/g with decreasing order of wx potato > wx corn > wx rice starch.     

New Sweet Potato Line having low Gelatinization Temperature and altered Starch Structure

A new sweet potato breeding line, Kanto 116, was developed, featuring low gelatinization temperature and an altered starch fine structure. Starch granules from Kanto 116 showed an abnormal morphology characterized by cracking into granules. Starch content, amylose content and tuberous root appearance of Kanto 116 were similar to those of the control and the parents. Pasting temperatures of Kanto 116 starch determined by the Rapid Visco Analyser were 51.4 — 52.6 °C, approximately 20 °C lower than those of the control and parents starches. Onset, peak, and conclusion temperature of gelatinization, and gelatinization enthalpy of Kanto 116 starch determined by differential scanning calorimetry were 39.0 °C, 46.9 °C, 64.8 °C, and 8.8 J/g, respectively, and much lower than those of the control and parents starches. The chain‐length distribution of the amylopectin molecules, determined by high‐performance anion‐exchange chromatography, showed that Kanto 116 starch had a higher proportion of short chains (DP 6 — 11) and a lower proportion of chains between DP 12 — 28 than control and parent starches. The debranched β‐limit dextrin of Kanto 116 starch also showed that the proportion of both short and long B1 chains was different from those of the control and parents starches.     

Physicochemical Properties of Sweetpotato Starches with Different Gelatinization Temperatures

Physicochemical properties of five sweetpotato starches differing in gelatinization temperature were examined. The gelatinization temperature of Koganesengan starch, an ordinary cultivar of sweetpotato in Japan, was 73.6°C, whereas those of the other starches were measured to be 71.6°C for Kyukei 96162–1, 65.8°C for Kyushu No.127, 63.9°C for Kyukei 240, and 54.9°C for Quick Sweet. Some relationships of the primary structural properties with the gelatinization temperature have been found. As the gelatinization temperature decreased: i) the content of phosphate groups attached to the glucosyl residues decreased, ii) the amylose content, which was determined as difference in long chains of debranched original starch and of its amylopectin, decreased, iii) the proportion of unit chains with DP > 100 in the amylopectin fraction increased, iv) the proportion of unit chains with DP 6 to 10 in the amylopectin fraction increased, whereas that of unit chains with DP 12 to 24 decreased, v) the B‐type crystallinity of the starch granules was enhanced, and vi) the proportion of longer chains constituting each Nägeli amylodextrin increased. Moreover, it was found that thin pastes of the low temperature‐gelatinizing starches retrograded slower during cold storage than the ordinary starch. Among the starches, Quick Sweet starch granules, having the lowest gelatinization temperature, were digested rapidly by pancreatin.     

Pasting and Thermal Properties of Potato and Bean Starches

Starches from potato (Mainechip, ND651-9 and Commercial) and Navy and Pinto bean were isolated and the pasting and thermal properties examined. Analysis by Rapid Visco-Analyzer (RVA) showed potato starches had lower pasting temperatures, higher peak viscosity, and lower setback than bean starches. High intrinsic viscosity values obtained for the potato starch indicated higher average molecular weight for the potato starches compared to the bean starches. Characterization of thermal (gelatinization and retrogradation) properties of starches by Differential Scanning Calorimetry (DSC) showed that potato starches had sharp, well-defined gelatinization thermograms, while bean starches had broad, shallow thermograms with higher peak temperature (Tp). Potato starches required higher gelatinization enthalpies than bean starches. In comparison with gelatinization, the retrogradation thermograms of starches stored at three different temperatures (23,4 and −10°C) were broader and occurred at the lower temperatures. Compared to potato starches, Navy and pinto bean starches showed a higher retrogradation enthalpy at 4 and 23°C storage temperatures, but a lower enthalpy at −10°C.