Antioxidants in grasshoppers: higher levels defend the midgut tissues of a polyphagous species than a graminivorous species

Polyphagous grasshoppers consume plants that contain markedly greater amounts of potentially prooxidant allelochemicals than the grasses eaten by graminivorous grasshoppers. Therefore, levels of antioxidant defenses maintained by these herbivores might be expected to differ in accordance with host plant ranges. Antioxidant levels were compared in midgut tissues and gut fluids of a polyphagous grasshopper, Melanoplus sanguinipes, and a graminivorous grasshopper, Aulocara ellioti. Glutathione concentrations in midgut tissues of M. sanguinipes (10.6 mM) are among the highest measured in animal tissues and are twice as high as those in A. ellioti. -Tocopherol levels are 126% higher in midgut tissues of M. sanguinipes than in those of A. ellioti, and remain at high levels when M. sanguinipes is reared on plants containing a wide range of -tocopherol concentrations. Ascorbate levels in M. sanguinipes midgut tissues are 27% higher than in those of A. ellioti, but vary depending on the host plant on which they are reared. Midgut fluids of both species contain elevated levels of glutathione, as well as large (millimolar) amounts of undetermined antioxidants that are produced in the insects. The consumption of tannic acid decreases ascorbate concentrations in midgut tisssues and gut fluids of A. ellioti but has no effect on ascorbate levels in M. sanguinipes. The results of this study provide the first measurements of antioxidants in grasshoppers and suggest that the maintenance of high levels of antioxidants in the midgut tissues of polyphagous grasshoppers might effectively protect them from oxidative stress.     

Asymmetric structure analysis of active surface-sites by in situ polarized total-reflection fluorescence EXAFS

An in situ polarization-dependent total reflection fluorescence yield EXAFS system has been developed to analyze the asymmetric structures of catalytically active metal sites on single crystal surfaces. This technique separately reveals the bonding feature parallel and perpendicular to the support surface. The systems of Cu ion on -quartz(0001), Co oxide on -alumina(0001), and Pt₄ on -alumina(0001) were investigated as model surfaces of supported catalytic systems. The location of Cu sites on -quartz(0001), the epitaxial growth mode of Co₃O₄ on -alumina(0001), and the Pt raft structure with metal-support interaction in Pt₄ / -alumina(0001) were observed.     

Synthesis and properties of aromatic polyesters and brominated polyesters derived from α,α′-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene

The interfacial polycondensation technique was used for the preparation of polyarylates and brominated polyarylates. Polyarylates and brominated polyarylates were prepared by mixing a solution of diacid chloride such as terephthaloyl chloride, isophthaloyl chloride, or their mixture in dichloromethane with an aqueous alkaline solution of ,-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene or ,-bis(4-hydroxy-3,5-dibromophenyl)-1,4(or 1,3)-diisopropylbenzene using triethylbenzylammonium chloride as the phase transfer agent. Moderate to high molecular weight polyarylates with _inh up to 1.27 dL/g were obtained, and most of them could be cast into tough and flexible films depending on the polymer composition. In general, polymers containing more 1,3-isomer or isophthaloyl chloride moieties gave transparent and flexible films and had lower glass transition temperatures and higher solubility. Although these polymers have two isopropylidene linkages in their repeating units, they still exhibit moderately high thermal stability and show no obvious weight loss before 400 °C. The introduction of bromine on the polymer backbone caused a decrease of inherent viscosity, crystallinity, and thermal stability of the polyarylates, while causing an increase in glass transition temperature and a great enhancement of fire retardancy.     

Enantioselective hydrogenation of α-ketoesters over Pt/alumina modified with cinchonidine: theoretical investigation of the substrate-modifier interaction

Enantio-differentiation in the asymmetric hydrogenation of -ketoesters to -hydroxyesters over platinum catalysts modified with cinchona-alkaloid modifiers occurs through interaction of the ketoester with the cinchona modifier. The structure of the probable transition complex has been calculated for the system methyl pyruvate (substrate) cinchonidine (modifier) using molecular mechanics and quantum chemistry techniques at both ab initio and semiempirical levels. The calculations suggest that protonated cinchonidine is energetically more likely to interact with the substrate and that the crucial interaction occurs via hydrogen bonding of the quinuclidine nitrogen and the oxygen of the -carbonyl moiety of methyl pyruvate. In this complex the methyl pyruvate is transformed into a half-hydrogenated species which is adsorbed on the platinum surface and on hydrogenation yields the product methyll actate. Theoretical studies indicate that adsorption of the complex leading to (R) -methyl lactate is energetically more favourable than that of the corresponding complex which yields (S) -methyl lactate, which may be the key for the enantio-differentiation.     

Highly Efficient Platinum-Catalyzed Enantioselective Hydrogenation of Trifluoroacetoacetates in Acidic Solvents

The hydrogenation of methyl-, ethyl- and isopropyl-4,4,4-trifluoroacetoacetates to the corresponding chiral trifluoromethyl alcohols has been investigated over Pt/A1₂O₃ modified by O-methyl-cinchonidine. Up to 96% ee and 1850 h^-1 average TOF have been achieved in the synthesis of this important chiral building block. The special role of reaction medium and particularly the impact of water and acids on enantiodiscrimination are discussed.     

Factors governing the electrochemical synthesis of α-nickel (ii) hydroxide

The electrodeposition of -nickel hydroxide is promoted by the simultaneous chemical corrosion of the electrode by an acidic nitrate bath. Chemical corrosion results in the formation of a poorly ordered layered phase which is structurally similar to -nickel hydroxide and provides nucleation sites for the deposition of the latter. Therefore under conditions which enhance corrosion rates such as low current density (<1.3 mA cm–2), high temperature (60 C), high nickel nitrate concentration ( 1M) and the resultant low pH (1.7), -nickel hydroxide electrodeposition is observed, while -nickel hydroxide forms under other conditions. Further, -nickel hydroxide deposition is more facile on an iron electrode compared to nickel or platinum.     

Response of the European elm bark beetle,Scolytus multistriatus (Coleoptera: Scolytidae), to isomers and components of its pheromone

Laboratory bioassays (two methods) and field tests demonstrated synergistic action of the three components [(–)-4-methyl-3-heptanol (I); (–)-2,4-dimethyl-5-ethyl-6,8-dioxabicylo[3.2.1]octane (-multistriatin) (II); and (–)--cubebene (III)] of the pheromone bouquet ofScolytus multistriatus. Individually and in pairs the components were slightly attractive; I+II was clearly the most active doublet. Indirect evidence indicates that only one of the four enantiomers of I is active. Of the , , and isomers of II, only the is active. With the addition of compound I, slightly attractive extract from mated females became nearly as active as extract from virgin females.     

Synergistic interaction between potato glycoalkaloidsα-solanine andα-chaconine in relation to destabilization of cell membranes: Ecological implications

In studies of the lysis of rabbit erythrocytes, red beet cells, andPenicillium notatum protoplasts by the potato glycoalkaloids -solanine and -chaconine, the latter was consistently the more membrane-disruptive compound and erythrocytes the more susceptible cell type. A 11 mixture of solanine and chaconine produced pronounced synergistic effects in all three test systems. In beet cells, such effects were apparent from an early stage of treatment and persisted over a period of several hours. With erythrocytes and fungal protoplasts, the synergism was maximal with mixtures containing approximately 70% chaconine, whereas with beet cells it peaked at approximately 40% chaconine. Synergistic interactions between solanine and chaconine also occurred with regard to cholesterol binding in vitro, with a maximum response corresponding to the 50% mixture. The implications of these findings for the nature and efficacy of chemical defense systems in plants are discussed.     

Selective synthesis of α-olefins on Fe-Zn Fischer-Tropsch catalysts

Fe/Zn oxides promoted with K and Cu selectively produce -olefins at typical Fischer-Tropsch synthesis conditions (2/1 H₂/CO, 1 MPa, and 270°C). The simultaneous presence of K and Cu introduces a synergistic activity enhancement while maintaining the high olefin selectivity obtained by alkali promotion. Structural and morphological differences in Fe-Zn oxides prepared from ammonium glycolate complexes or precipitated from nitrate solutions have only a small influence on catalytic properties. Catalyst behavior is strongly influenced by synergistic promoter effects (Cu, K) and by the controlled in situ conversion of iron oxide precursors to carbides.     

Transport of phosphorus forms and of nitrate through a clay soil under grass and cereal production

Many nutrients are lost from soil to water viatile drains. However, there are very few reliable studies of such phosphorus(P)losses under Swedish agriculture practices, especially in connection tofertiliser and slurry applications and related to nutrient balances. Tile drainlosses were measured from nine experimental plots in south-west Sweden; fourplots were measured for 7 years and five plots for 2–3 years. Cereals,mainly spring barley (Hordeum vulgare, L.) and oats(Avena sativa, L.), were grown in six plots, while oneplotwas cultivated with grass, timothy (Phleum pratense L.)andmeadow fescue (Festuca pratensis, L.), one with lucerne(Medicago sativa, L.) and meadow fescue (F.pratensis, L.), and the last one was a set-aside withgrass (Lolium perenne, L. and Trifoliumrepens, L.) that was neither fertilised nor used for crop removal.Attention was paid to the forms in which P was transported to water since thishas important ecological implications. Average losses of particulate P (PP)fromthe set-aside land was significantly lower than from the cerealproduction, but the average losses of soluble reactive P (SRP) and dissolvednonreactive P (DUP) were the same. Average loss of PP from the grass ley during 3years (0.09 kg per ha^–1 y^–1) wassignificantly less than the losses from cereal production. Total P loss of 0.3kg per ha^–1 y^–1 was equal to the averagelossfrom the Swedish monitoring network of observation fields. Compared to theaverage nitrate-nitrogen (NO₃-N) leaching, which was 7 kg perha^–1 y^–1 from cereals, the NO₃-Nleaching was very low from the plots with lucerne-grass and set-aside.After applying and directly ploughing in 80 kg ha^–1 ofsuperphosphate for cereal production in November 1998, 0.6–1.8 kgSRP ha^–1 y^–1 was lost through the drain tiles.Surface application of cattle slurry in spring 1999 to the grass ley alsoresulted in a very pronounced increased base level of SRP. This paper documentsthe importance of applying slurry during dry conditions and of placingfertiliser into the soil according to crop requirements in the time perspectiveof one year.     

Residual effects of growing mungbean and uridbean on the yield and nitrogen uptake of a succeeding wheat crop

A two year field experiment was carried out at the Indian Agricutural Research Institute, New Delhi - 110012, India to assess the effect of mungbean (Vigna radiata L.) and uridbean (Vigna mungo L.) residues on the yield and N uptake of a succeeding wheat crop as compared to sorghum fodder. Sorghum produced 3.5–7.5 times more dry matter and removed 2–3 times more nitrogen than mungbean or uridbean during same duration (80 ± 10 days) of their growth. Without N application the grain yield of wheat following mungbean and uridbean (without residue incorporation) was 0.45 and 0.48 t ha^–1 more than the yield of wheat following sorghum fodder. These yields were equivalent to that predicted when 36 and 38 kg urea-N ha^–1, respectively, was directly applied to wheat. The residual effects of these grain legumes were higher when succeeding wheat was fertilized with 60 kg urea-N ha^–1; at this level mungbean and uridbean spared 52 and 43 kg urea-N ha^–1, respectively, in succeeding wheat. The residual effect of mungbean and uridbean further increased when their residue was incorporated in soil; with this practice they spared 94 and 115 kg urea-N ha^–1, respectively, without N application to wheat and 74 and 82 kg urea-N ha^–1, respectively, with an application of 60 kg urea-N ha^–1 to wheat.Mungbean and uridbean, without residue incorporation, increased aboveground plant-N uptake of succeeding wheat by 11.5–34.9 and 10.8–34.0 kg N ha^–1, respectively; whereas with residue incorporation, they increased aboveground plant-N content of succeeding wheat by 26.1–45.8 and 32.7–47.7 kg N ha^–1, respectively.The results of the present study indicate that there is both an indirect sparing effect and a direct residual effect of mungbean and uridbean on the nitrogen needs of succeeding wheat, more so when their residues are incorporated in soil.     

Apple Fruit Infested with Codling Moth are More Attractive to Neonate Codling Moth Larvae and Possess Increased Amounts of (E,E)-α-Farnesene

Apple fruit artificially infested with codling moth larvae attracted significantly more neonate larvae of the codling moth, Cydia pomonella than uninfested fruit. A greater number of larvae responded to odor in an olfactometer from codling moth-infested cold-stored Red Delicious thinning apples than uninfested apples. Immature Granny Smith, Red Delicious, or Golden Delicious apples that were infested on the tree for five days by codling moth larvae were more attractive to neonate codling moth larvae than similar but uninfested fruit of the same varieties. Apples infested on the tree and sampled five days later also contained significantly greater amounts of the larval attractant (E,E)--farnesene, compared to uninfested apples. Other types of injury to apple fruit did not produce results similar to that from codling moth infestation, either in increased attractiveness to codling moth larvae or in increased quantities of (E,E)--farnesene. These results are consistent with the reported attractiveness of (E,E)--farnesene to neonate codling moth larvae.     

Structural significance of the alkyl substituent at the C-4 of (+)-trans-verbenyl acetate in sex pheromonal activity of the American cockroach

The significance of the alkyl group at the C-4 of (+)-trans-verbenyl acetate, which is the sex pheromone mimic of the American cockroach, was investigated. Seven alcohols possessing an ethyl, propyl, or dimethyl group at this position of the 6,6-dimethylbicyclo[3.1.1]heptane skeleton were synthesized and evaluated by behavioral assay. All of the alcohols were inactive, while three of four acetates of the 2-alcohols induced sexual behavior in male cockroaches at the 0.02 or 0.5 mg dosage level, either of which is many orders of magnitude higher than the threshold level of the natural sex pheromones (10^–8 mg). Among the acetates, the compounds with a methyl group or an -oriented ethyl group at C-4 showed the highest activity. The results are discussed in terms of spatial requirements of the molecules for interactions with the receptor.Studies on the sex pheromone mimic of the American cockroach, (+)-trans-verbenyl acetate. Part VIII. For Part VII, seeComp. Biochem. Physiol.,70A: 229–234 (1981).     

Enhancement of the activities with feedstream doping by tetrachloromethane in the oxidative dehydrogenation of propane on α-magnesium pyrovanadate

The oxidative dehydrogenation of propane to propylene has been investigated on -magnesium pyrovanadate (Mg₂V₂O₇) at 723 K in the presence and absence of tetrachloromethane (TCM). Under the present conditions, the conversion of propane and the selectivity to propylene were 5.0 and 74.5%, respectively, in the absence of TCM while those were 14.0 and 70.2%, respectively, upon addition of a small amount of TCM (P(TCM) = 0.34 kPa) into the feedstream on the catalyst. The conversion of propane on Mg₂V₂O₇ without oxidant in the presence and absence of TCM revealed that a contribution of lattice oxygen in the catalyst to the oxidation was strongly controlled by the addition of TCM, resulting in the enhancement of the activity with TCM.     

Mechanisms of Iron Activation on Fe-Containing Zeolites and the Charge of α-Oxygen

According to previous Mössbauer data [1] -sites formation at the activation of Fe-containing zeolites is accompanied by irreversible self-reduction of the iron, proceeding without participation of an external reducing agent. Reduced Fe²⁺ ions are inert to O₂ but are reversibly oxidized to Fe³⁺ by N₂O, generating the -oxygen species, O, which provide selective oxidation of hydrocarbons.In this work, the mechanism of -sites formation was studied via quantitative measurement of the dioxygen amount desorbed into the gas phase at the step of self-reduction. A prominent role of the zeolite matrix chemical composition has been revealed. For example, with zeolites of Al–Si composition (FeZSM-5 and Fe-), heating to 900 °C in a closed vacuum space leads to irreversible evolution of O₂, which is accompanied by the immediate formation of -sites. Similar heating of B–Si and Ti–Si zeolites also leads to dioxygen evolution; however, this evolution is reversible and is not accompanied by formation of -sites. Activation of these zeolites occurs only in the presence of water vapor. Stoichiometric measurements showed that in terms of charge one regular O^2- ion, removed at the activation, is equivalent to two -oxygen atoms. So, -oxygen is identified as an ion-radical species O ^-., whose unique oxidation properties still distinguish it from the generally observed O^-. radicals.The mechanism of -sites formation is proposed, in which the process of strong chemical stabilization of reduced Fe²⁺ atoms in the zeolite structure is a key step, making impossible the reoxidation of the iron with O₂.     

Surface properties of ZSM-5 modified by phosphorus

Phosphorus modification of ZSM-5 leads to extra framework P⁵⁺ and probably incorporation of +3 valence state of P in the framework. The resulting system has increased Brønsted acidity. Theoretical calculations also favour the postulate that phosphorus in +3 valence state can be incorporated into the lattice.     

Phosphinated linear polystyrene as a ligand of palladium catalysts for ethoxycarbonylation of 4,4′-dibromobiphenyl

Phosphinated linear polystyrene was synthesized and used as a ligand of palladium catalysts. It showed high activity for the ethoxycarbonylation of 4,4-dibromobiphenyl (I) in the presence of triethylamine. The catalysts acted as homogeneous under the reaction conditions (150°C, p(CO) = 10 kg/cm²), and precipitated as solid materials after the reaction. Catalytic performances highly depended on the compositions of the solvent, and the highest activity was achieved in ethanol.     

Partial oxidation of methane to synthesis gas

Partial oxidation of methane to synthesis gas has been carried out over a number of transition metal catalysts under a range of conditions. It is found that the metals Ni, Ru, Rh, Pd, Ir and Pt, either supported on alumina or present in mixed metal oxide precursors, will bring the system to equilibrium. The yield of CO and H2 improves with increasing temperature in the range 650–1050 K, and decreases with increasing pressure between 1 and 20 atm. An excellent yield (92%) is obtained with a 421 N₂CH₄O₂ ratio at 1050 K and atmospheric pressure, with a space velocity of 4×10⁴ hour^–1.     

Suppression of the α → β-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations

The presence of dissolved cations such as Al and Zn in alkaline electrolyte (6 M KOH) suppresses the -nickel hydroxide transformation. The uptake of Al (10 mol%) and Zn (30 mol%) exhibited by the active material likely stabilizes the -phase. Dissolved Al is deleterious to the performance of the nickel hydroxide electrode, whereas, dissolved Zn enhances the specific discharge capacity of nickel hydroxide by approximately 25% showing that the mode of metal uptake is different in the two cases.     

Alkylation of α-Methylnaphthalene with Long-Chain Olefins over Large-Pore Zeolites

The liquid-phase alkylation of -methylnaphthalene with long-chain olefins (C_11–12) has been investigated firstly in the presence of H-Y and H-Beta zeolites with different pore architectures. The H-Y zeolites exhibited outstanding catalytic performances. The influences of various reaction parameters like temperature, pressure, mole ratio of -methylnaphthalene to olefins (n _rea), solvent concentration, volume hour space velocity (VHSV) and time on stream on the reaction were studied in detail. Under the optimal reaction parameters, more than 90% conversion of olefins and 100% selectivity for the desired mono-alkyl methylnaphthalene were achieved.