Broadcast-and-select photonic ATM switch with frequency divisionmultiplexed output buffers

A photonic ATM switch has been developed with frequency division multiplexed (FDM) output buffers. The switch has a broadcast-and-select network architecture using fixed-frequency-channel transmitters and a passive star configuration. Although it has a simple structure, it can provide either broadcast or multicast switching. The output buffers, which resolve cell contentions, are comprised of fiber delay lines that can easily handle signal speed of over 10 Gb/s. Experimental switching of two-multiplexed 10 Gb/s cells with a 2.8-dB power penalty demonstrated high-speed switching     

Ultrafast photonic ATM switch with optical output buffers

An ultrafast photonic asynchronous transfer mode (ATM) (ULPHA) switch based on a time-division broadcast-and-select network with optical output buffers is presented. The ULPHA switch has an ultra-high throughput and excellent traffic characteristics, since it utilizes ultrashort optical pulses for cell signals and avoids cell contentions by novel optical output buffers. Feasibility studies show that an 80×80 ULPHA switch with 1-Gb/s input/output is possible by applying the present technology, and that more than 1 Tb/s is possible by making a three-stage network using such switches. As an experimental demonstration, 4-bit 40-Gb/s optical cells were generated and certain cells were selected at an output on a self-routing basis. With its high throughput and excellent traffic considerations, the ULPHA switch is a strong candidate for a future large-capacity optical switching node     

A 2.5 Gb/s ATM switch chip set

The design and implementation of two application specific integrated circuits used to build an ATM switch are described. The chip set is composed of the CMC which is an input/output processor of ATM cells implemented on a BICMOS 0.7 μm technology and the ICM, a 0.7 μm CMOS IC, that performs cell switching at 68 MHz. The ATM switch exploits parallelism and segmentation to perform 2.5 Gb/s switching per input/output. The main advantage of the high-speed link rates in the range of Gb/s, is the exploitation of statistical gain with bursty high peak rate sources. Another feature of the high speed ATM switches is that the number of interface devices and stages is reduced on an ATM network. To demonstrate the usefulness of the switch, an evaluation of the network efficiency improvement by using statistical gain is presented in the paper     

Terahipas: a modular and expandable terabit/second hierarchicallymultiplexing photonic ATM switch architecture

A terabit/second hierarchically multiplexing photonic asynchronous transfer mode (ATM) switch network architecture, called Terahipas, is proposed. It combines the advantages of photonics (a large bandwidth for transport of cells) and electronics (advanced logical functions for controlling, processing, and routing). It uses a hierarchical photonic multiplexing structure in which several tens of channels with a relatively low bit rate, say 2.4 Gb/s, are first time-multiplexed on an optical highway by shrinking the interval between optical pulses, then a number of optical highways are wavelength-multiplexed (or space-division multiplexed). As a result, the switch capacity can be expanded from the order of 100 Gb/s to the order of 10 Tb/s in a modular fashion. A new implementation scheme for cell buffering is used for eliminating the bottleneck when receiving and storing concurrent optical cells at bit rates as high as 100 Gb/s. This new architecture can serve as the basis of a modular, expandable, high-performance ATM switching system for future broad band integrated service digital networks (B-ISDN's)     

An expandable time-division circuit switching LSI and networkarchitecture for broadband ISDN

A broadband network architecture is proposed that integrates multimedia services, such as data, video, and telephony information, using 52-Mb/s based STM-paths at the user network interface (UNI). The user can access any new service via the STM-based access network via either synchronous transfer mode (STM) switching or asynchronous transfer mode (ATM) switching. STM circuit switching supports long duration, constant bandwidth data transfer services such as video and high-definition television (HDTV) distribution and will also be used for the crossconnect system. Circuit switching can provide transparent transmission during long connection periods. This paper also proposes an expandable time-division switch architecture, an expandable time-division switching LSI, and an expandable switching module for small to large size system applications. The proposed time-division switching LSI, module, and system handle 52-Mb/s bearer signals and have throughputs of 2.4 Gb/s, 10 Gb/s, and 40 Gb/s, respectively. The time-division switch realizes video distribution with 1:n connections. Finally, a local switching node that features an expandable 52-Mb/s time-division circuit switching network is shown for multimedia access networking     

A high-speed-retry banyan switch architecture for giga-bit-rate BISDN networks

This paper proposes a high-speed ATM switch architecture for handling cell rates of several Gb/s in a broadband communication switching system or cross-connect system. The proposed switch architecture, named the high-speed-retry banyan switch, employs a bufferless banyan network between input and output buffers; a cell is repeatedly transmitted from an input buffer until it can be successfully transmitted to the desired output buffer. A simple cell-retransmission algorithm, is employed as is a ring-arbitration algorithm for cell conflict. They are suitable for FIFO type buffers and bufferless highspeed devices. Good traffic characteristics which are independent of switch size are achieved for an internal speed ratio of only four times the input line speed. A prototype system with the internal speed of 1·2 Gb/s is constructed in order to confirm the basic operation of the high-speed-retry banyan switch. The prototype system, even in its present state, could be used to realize a giga-bit-rate BISDN switching system.     

A photonic front-end processor in a WDM ATM multicast switch

Dense wavelength-division multiplexing (DWDM) technology has provided tremendous transmission capacity in optical fiber communications. However, switching and routing capacity is still far behind transmission capacity. This is because most of today's packet switches and routers are implemented using electronic technologies. Optical packet switches are the potential candidate to boost switching capacity to be comparable with transmission capacity. In this paper, we present a photonic asynchronous transfer mode (ATM) front-end processor that has been implemented and is to be used in an optically transparent WDM ATM multicast (3M) switch. We have successfully demonstrate the front-end processor in two different experiments. One performs cell delineation based on ITU standards and overwrites VCI/VPI optically at 2.5 Gb/s. The other performs cell synchronization, where cells from different input ports running at 2.5 Gb/s are phase-aligned in the optical domain before they are routed in the switch fabric. The resolution of alignment is achieved to the extent of 100 ps (or 1/4 bit). An integrated 1×2 Y-junction semiconductor optical amplifier (SOA) switch has been developed to facilitate the cell synchronizer     

Asynchronous transfer mode switching LSI chips with 10-Gb/s serialI/O ports

LSI chips were developed that fit on a switching fabric using chip-to-chip optical interconnections; they have 10-Gb/s serial input and output ports, which facilitates the layout of optically interfaced switching element modules. A test switching module composed of these chips was operated at 10.2 Gb/s without bit errors. Ultrahigh-speed switching LSI chips have been developed for a future asynchronous transfer mode (ATM) switching system with an over-Tb/s capacity. Their serial input and output ports facilitate chip-to-chip optical interconnection. Cell-dropper and crosspoint-router LSI chips, composing the core of the switching element, were fabricated by using GaAs LSI technology. A test switching module composed of these chips was operated at 10.2 Gb/s without bit errors     

20.8 Gb/s GaAs LSI self-routing switch for ATM switching systems

An 8×8 self-routing hardware switch providing 20.8 Gb/s throughput has been developed for asynchronous transfer mode (ATM) switching systems. The basic architecture of this switch is a Batcher-Banyan network. A new mechanism for data processing and distributing high-speed signals is proposed. This switching system consists of three LSIs using a 0.5-μm gate GaAs MESFET technology. These LSIs are a switching network LSI for exchanging packet cells with eight cell channels, a negotiation network for screening of cells destined for the same output port, and a demultiplexer LSI for converting the cell streams from the switching network LSI to the eight streams per channel. These LSIs are mounted in a 520-pin multichip module package. The total number of logic gates is 13.3 k, and the power dissipation is 24 W. The switching system fully operates at a data rate of 2.6 Gb/s, and its throughput is 20.8 Gb/s     

A 100-Gb/s throughput ATM switch MCM with a 320-channel paralleloptical I/O interface

For an ATM switch system, we have developed a 100-Gb/s input/output (I/O) throughput optical I/O interface ATM switch multichip module (MCM) that has 320-ch optical I/O ports. This MCM is fabricated using ceramic (MCM-C) technology and very-small highly-parallel O/E and E/O optical converters. It uses 0.25-μm complementary metal oxide semiconductors (CMOS) ATM switch large scale integrations (LSIs) and has a total I/O throughput of up to 160 Gb/s. A prototype module with total I/O throughput of 100 Gb/s has been partially assembled using eight optical I/O interface blocks, each composed of a 40-ch O/E converter and a 40-ch E/O converter; the data rate per channel is from dc to 700 Mb/s. Using this module we developed an optical I/O interface ATM switch system and confirmed the operation of the optical interface     

An optical packet switch based on WDM technologies

Dense wavelength-division multiplexing (DWDM) technology offers tremendous transmission capacity in optical fiber communications. However, switching and routing capacity lags behind the transmission capacity, since most of today's packet switches and routers are implemented using slower electronic components. Optical packet switches are one of the potential candidates to improve switching capacity to be comparable with optical transmission capacity. In this paper, we present an optically transparent asynchronous transfer mode (OPATM) switch that consists of a photonic front-end processor and a WDM switching fabric. A WDM loop memory is deployed as a multiported shared memory in the switching fabric. The photonic front-end processor performs the cell delineation, VPI/VCI overwriting, and cell synchronization functions in the optical domain under the control of electronic signals. The WDM switching fabric stores and forwards cells from each input port to one or more specific output ports determined by the electronic route controller. We have demonstrated with experiments the functions and capabilities of the front-end processor and the switching fabric at the header-processing rate of 2.5 Gb/s. Other than ATM, the switching architecture can be easily modified to apply to other types of fixed-length payload formats with different bit rates. Using this kind of photonic switch to route information, an optical network has the advantages of bit rate, wavelength, and signal-format transparencies. Within the transparency distance, the network is capable of handling a widely heterogeneous mix of traffic, including even analog signals.     

Optical TDM sorting networks for high-speed switching

The general time-space-time switching problem in telecommunications requires the use of multichannel time slot interchangers. We propose two multichannel time slot sorters which sort N² time-division multiplexed (TDM) optical inputs, arranged as N frames with N time slots per frame using O(Nlog²N) optical switch elements. The TDM optical inputs are sorted in place without expanding the space-time fabric into a space-division switch. The hardware components used are 2×2 optical switches (LiNbO₃ directional couplers) and optical delay lines connected in a feedforward fashion. Two space-time variants of the spatial odd-even merge algorithm are used to design the sorters. By maintaining the number of shift-exchange operations invariant at each stage, the proposed sorters use fewer switches than previously proposed sorters using switches with feedback line delays. The use of local control at each 2×2 switch makes the proposed sorters more practical for high-speed optical inputs than Benes-based time slot permuters with global control and high latency, which affects interframe distance. Both time slot sorters support pipelining of input frames and sorted outputs are available at each time slot after an initial frame delay. The proposed sorters find practical application in the time-domain equivalents of space-division, nonblocking, self-routing packet switches using the sort-banyan architecture, such as the Starlite switch, Sunshine switch, etc     

An ATM routing and concentration chip for a scalable multicast ATMswitch

We have proposed a new architecture for building a scalable multicast ATM switch from a few tens to a few thousands of input/output ports. The switch, called the Abacus switch, employs input and output buffering schemes. Cell replication, cell routing, and output contention resolution are all performed in a distributed way so that the switch can be scaled up to a large size. The Abacus switch adopts a novel algorithm to resolve the contention of both multicast and unicast cells destined for the same output port (or output module). The switch can also handle multiple priority traffic by routing cells according to their priority levels. This paper describes a key ASIC chip for building the Abacus switch. The chip, called the ATM routing and concentration (ARC) chip, contains a two-dimensional array (3×32) of switch elements that are arranged in a cross-bar structure. It provides the flexibility of configuring the chip into different group sizes to accommodate different ATM switch sizes. The ARC chip has been designed and fabricated using 0.8-μm CMOS technology and tested to operate correctly at 240 MHz, Although the ARC chip was designed to handle the line rate at OC-3 (155 Mb/s), the Abacus switch can accommodate a much higher line rate at OC-12 (622 Mb/s) or OC-48 (2.5 Gb/s) by using a bit-sliced technique or distributing cells in a cyclic order to different inputs of the ARC chip. When the latter scheme is used, the cell sequence is retained at the output of the Abacus switch     

A prototype broadcast-and-select photonic ATM switch with a WDMoutput buffer

A rack-mounted prototype of a broadcast-and-select (B and S) photonic ATM switch is fabricated. This switch has an optical output buffer utilizing wavelength division multiplexed (WDM) signals. The WDM technology solves. The cell-collision problem in a broadcast-and-select network and leads to a simple network architecture and the broadcast/multicast function. The prototype can handle 10-Gb/s nonreturn-to-zero (NRZ) coded cells and 5-Gb/s Manchester-coded cells and has a switch size of four. In this prototype, the level and timing design are key issues. Cell-by-cell level fluctuation is overcome by minimizing the loss difference between the optical paths and adopting a differential receiver capable of auto-thresholding. The temperature control of delay lines was successful in maintaining the phase synchronization. Using these techniques, we are able to provide a WDM highway with a bit error rate of less than 10^-12. Fundamental photonic ATM switching functions, such as optical buffering and fast wavelength-channel selection, are achieved. We show our experimental results and demonstrate the high performance and stable operation of a photonic ATM switch for use in high-speed optical switching systems as an interconnect switch for a modular ATM switch and an ATM cross-connect switch     

A 622-Mb/s 8×8 ATM switch chip set with shared multibufferarchitecture

An asynchronous transfer mode (ATM) switch chip set, which employs a shared multibuffer architecture, and its control method are described. This switch architecture features multiple-buffer memories located between two crosspoint switches. By controlling the input-side crosspoint switch so as to equalize the number of stored ATM cells in each buffer memory, these buffer memories can be treated as a single large shared buffer memory. Thus, buffers are used efficiently and the cell loss ratio is reduced to a minimum. Furthermore, no multiplexing or demultiplexing is required to store and restore the ATM cells by virtue of parallel access to the buffer memories via the crosspoint switches. Access time for the buffer memory is thus greatly reduced. This feature enables high-speed switch operation. A three-VLSI chip set using 0.8-μm BiCMOS process technology has been developed. Four aligner LSIs, nine bit-sliced buffer-switch LSIs, and one control LSI are combined to create a 622-Mb/s 8×8 ATM switching system that operates at 78 MHz. In the switch fabric, 155-Mb/s ATM cells can also be switched on the 622-Mb/s port using time-division multiplexing     

新型光缓存器和2×622Mb／s ATM光交换系统

本文给出一种新型的光缓存器的结构，以解决在ＡＴＭ光交换中的信元碰撞问题。这种缓存器由光纤延迟线、光波导开关阵及非线性半导体光放大器构成。文中还报告了一种用于交换各用户不同速率的信元（可达６２２Ｍｂ／ｓ）的ＡＴＭ光交换实验系统，系统的总容量为１．２Ｇｂ／ｓ。     

Output-buffer switch architecture for asynchronous transfer mode

This paper proposes a new asynchronous transfer mode (ATM) switch architecture for the broadband ISDN. The ATOM switch ATM output-buffer modular switch has a multi-stage network structure, and is highly modular to facilitate capacity expansion. The ATOM switch element is of the output-buffer type with a time-division multiplexed bus and FIFO buffer for each outgoing line. Bit-slice techniques are used to implement the high-speed time-division bus and buffer memories. The output buffer switch has the advantages of no throughput degradation since internal contention is eliminated, and a simple control structure for providing priority and multi-point connections. This paper also deals with switching delay and buffer overflow probabilities for mixed (bursty and non-bursty) traffic.     

A TDM-based multibus packet switch

A new packet switch architecture using two sets of time-division multiplexed buses is proposed. The horizontal buses collect packets from the input links, while the vertical buses distribute the packets to the output links. The two sets of buses are connected by a set of switching elements which coordinate the connections between the horizontal buses and the vertical buses so that each vertical bus is connected to only one horizontal bus at a time. The switch has the advantages of: (1) adding input and output links without increasing the bus and I/O adaptor speed; (2) being internally unbuffered; (3) having a very simple control circuit; and (4) having 100% throughput under uniform traffic. A combined analytical-simulation method is used to obtain the packet delay and packet loss probability. Numerical results show that for satisfactory performance, the buses need to run about 30% faster than the input line rate. With this speedup, even at a utilization factor of 0.9, each input adaptor requires only 31 buffers for a packet loss rate of 10^-6. The output queue behaves essentially as an M/D/1 queue     

Optical bit-interleave multiplexing ATM switch

A new optical ATM switch is proposed in which cells from individual input channels are time multiplexed by bit-interleaving. Compared to an earlier counterpart that used a cell-interleave time multiplexing scheme. The proposed switch has a much simpler structure, which significantly reduces hardware complexity. A basic demultiplexing experiment is carried out as a test