Efficiency of Laundry Polymers Containing Liquid Detergents for Hard Surface Cleaning

Three water soluble laundry polymers were employed for the first time in liquid detergent formulations for hard surface cleaning. The polymers included in the formulations were the sodium salt of maleic acid/olefin copolymer (P1, anionic), polyethyleneimine (P2, cationic), and polyethylene glycol‐g‐vinyl acetate (P3, nonionic). Commercially available surfactants (C₁₀ Guerbet alcohol alkoxylate (FAEO), caprylyl/decyl glucoside (APG), and the sodium salt of ethoxylated alkyl ether sulfate (SLES) were chosen to formulate bathroom, kitchen, and all‐purpose cleaners, which provide the desired broad of pH range for hard surface applications. Their hard surface cleaning efficiencies were also compared with an amphoteric polymer (amino modified polycarboxylate, P4) as amphoteric polymers are the most suitable structures for hard surface cleaning. The standard test method and the cleaning device, the so‐called cleaning robot, were used to investigate the primary cleaning performances and synergies of the chosen polymers in a hard surface cleaners system. Secondary cleaning performance tests, which indicate the effects of the hard surface cleaners on surface modification, were also performed. The results revealed that the formulations containing P3 and P4 gave the better cleaning performance for primary cleaning tests whereas only P4‐containing formulations showed the significant results for secondary cleaning tests.     

The Disinfecting Action of Ozonated Water and of Hydrogen Peroxide/Silver Ions In Vitro

An in-vitro comparison was made between the disinfecting action of ozonated water and hydrogen peroxide/silver ion preparations using the “Quantitative suspension” test and Pseudomonas aemginosa. No microorganisms could be detected immediately after contact between ozonated water and the pseudomonadeae. In the case of the peroxide preparation, however, its action corresponded to that of aqua bidestillata (control experiment) and no disinfection had taken place. The use of hydrogen peroxide preparations in dental units for microbiological and toxicological reasons should therefore be reconsidered.     

The Combination of Ozone/Hydrogen Peroxide and Ozone/UV Radiation for Reduction of Trihalomethane Formation Potential in Surface Water

Applied ozone dosages of 20, 25, and 30 mg/L to lake water utilized by the city of Shreveport, LA produced no significant reductions in trihalomethane formation potentials (THMFP). However, the addition of 20 mg/L of hydrogen peroxide and/or 0.67 W/L of UV radiation (254 nm) in combination with ozone produced decreases in THMFP of over 60% in 60 minutes. Smaller THMFP decreases were seen with shorter contact times. The use of H₂O₂ and/or UV in combination with O₃ increased the percentage of applied ozone consumed by the lake water (i.e., enhanced the ozone mass transfer) five times over simple ozonation.     

A Method for Cleaning Heat Exchanger Pipes with Flow Energy Usage

This paper describes the application of an effective hydro‐dynamical vibrational device for cleaning inner surfaces of pipes from sediments. The device is based on the phenomenon of vortex shedding behind spheres in fluid flow (Karman vortex street), which leads to vibration and sphere rotation. Forces of impact interactions of a sphere with the pipe wall exceed 25 N. This value allows cleaning of pipe inner surfaces irrespective of the sediment type. The ability to vary the sphere oscillations and a range of up to 125 Hz provide very flexible intensity control for the cleaning process. The pressure pulsations caused by the working device greatly increase the efficiency of sediment removal. Experimental results are provided, showing good agreement between practice and theoretical models. Laboratory tests show the high efficiency of the cleaning device.     

A Surface Plasmon Resonance Optical Fibre Sensor for Testing Detergent Cleaning Efficiency

The objective of this paper is to report a feasibility study on the use of optical fibre and surface plasmon resonance (SPR) for determining detergent efficiency. The concept presented comprises a miniaturised dip‐sensor for enabling automated on‐line testing. In this way, the effect of formulation, concentration and temperature on the cleaning behavior of various surfactants and commercial cleaners is investigated. For this purpose, the decladded core of an optical fibre was sputtered with gold and afterwards coated with defined layers of stearic acid or animal fat to obtain a kind of model soil. The deposition of stearic acid was performed using a Langmuir–Blodgett through, and the sensor followed on‐line the deposition of the respective monolayers by UV/VIS spectroscopy, appearing as a distinct and constant shift in wavelength. Moreover, functional coatings were applied above the gold layer to achieve a variation of the hydrophilicity of the sensor surface. The SPR sensor proved to be easy to use, accurate and flexible. It offers a new solution that could replace the existing methods for detergency sensing and with a customised design it could be a useful industry tool since the small size of the dip sensor promises massive testing. The experiment also showed that functionalising the sensing zone could act as a way to mimic the potential substrates for cleaning.     

Combination of Ozonation and Hydrogen Peroxide Bleaching for Linen Fabrics: Optimization of the Process Using Experimental Design Technique

It is well known that ozone can be used as a bleaching agent for cellulosic textile materials. In the context of this study, investigations were undertaken to optimize bleaching of linen fabrics using Box-Behnken Experimental Design. The bleaching process involved two distinct steps where linen fabrics were ozonated under different treatment times then the latter in a subsequent step were subjected to hydrogen peroxide bleaching under a variety of conditions. As a result of study, three optimum recipes were achieved and pretreatment with ozone for 15 min before peroxide bleaching supplies time and chemical savings.     

2008年美国学校绿色清洗奖述评

评述了美国"学校绿色清洗奖"的设立背景和评判标准,2008年获奖者的绿色清洗情况,旨在对国内学校的绿色清洗有所启迪.     

用高压水枪处理窑尾上升烟道结皮

本文在分析窑尾上升烟道结皮危害及产生原因的基础上,介绍了我公司国内首创采用高压水枪清除烟道结皮的方法、效果和注意事项.     

硅碳型软泡匀泡剂合成及其性能研究

对一种醚基封端硅碳型聚氨酯软泡匀泡剂Ｈ－４２０的合成，发泡性能进行了研究并与同类匀泡剂比较性能。结果表明，在结构上它与美国Ｌ－５８０匀泡剂属同一类型，发泡性能也与Ｌ－５８０相近。     

Complexation of Surfactant/β‐Cyclodextrin to Inhibit Surfactant Adsorption onto Sand,Kaolin, and Shale for Applications in Enhanced Oil Recovery Processes. Part II: Dynamic Adsorption Analysis

Surfactant adsorption onto solid surfaces is problematic in some industrial processes, such as in surfactant flooding for enhanced oil recovery. In this work, it was hypothesized that the use of a surfactant delivery system could prevent surfactant adsorption onto solid surfaces. Therefore, the encapsulation of sodium dodecyl sulfate (SDS) into the hydrophobic core of β‐cyclodextrin (β‐CD) to generate a surfactant delivery system (SDS/β‐CD) was evaluated in this work. This complexation was characterized using optical and scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT‐IR). Dynamic adsorption evaluation was applied to determine the effectiveness of the complexation in inhibiting surfactant adsorption onto a variety of solid adsorbents including sand, and mixtures of sand–kaolin and sand–shale. Surfactant adsorption was also evaluated applying the quartz crystal microbalance technology (QCM‐D). The formation and morphology of the complexation was confirmed by optical microscopy, SEM, and FT‐IR. Dynamic adsorption tests demonstrated the effectiveness of the surfactant delivery approach in preventing the adsorption of surfactant (up to 74 % adsorption reduction). The QCM‐D technology confirmed these observations. Several mechanisms were proposed to explain the inhibition of surfactant adsorption including steric hindrance, self‐association of inclusion complexes, hydrophilicity increase, and disruption of hemimicelles formation.     

Pulsatile Jet Cleaning of Filter Cloths Contaminated with Yeast Cells

The cleaning of filter cloths is necessary to avoid prolonged system downtime and strong fouling. Reliable cleaning concepts are central to the removal of residues from the complex surface of filter cloths. Particle residues, in particular, play a decisive role in the sufficiency of the cleaning performance. Consequently, enhanced particle‐removal cleaning concepts based on pulsatile jets for filter cloths have been developed. By varying the cleaning parameters, it has been demonstrated that increased pulse numbers and velocities improve the cleaning performance. Furthermore, this promising cleaning concept cleaned more effectively than conventional methods. The reduction in the amount of detergent needed is an ecological and economic advantage of pulsatile cleaning.     

Application of Combined Ozone–Hydrogen Peroxide for the Removal of Aromatic Compounds from a Groundwater

Nitro and chlorobenzene compounds, which are widely used in dye industries, have been associated recently with groundwater contamination. Because of their potential toxicity and for taste and odor considerations, three main actions were undertaken to solve the problem. First, to follow the advance of pollution toward the wells, samples were collected automatically and analyzed using GC-MS. Results indicate that o-chloronitrobenzene was the main pollutant in concentrations ranging from 10 to 2000μg/L. Second, to monitor the drinking water quality, an on-line spectrophotometer was used to measure the optical density at 254 nm at the inlet and outlet of the plant. Third, the feasibility of using the O₃/H₂O₉ combination was determined at a 450 L/h pilot plant. Reduction of concentrations of chloronitrobenzenes from 1900 μ/L to less than 20 μg/L could be reached by the application of 8 mg O3/L and 3 mg H2O9/L with a 20-minute contact time. To avoid an eventual bacterial egrowfn in the network due to biodegradability of the oxidation by-products, sand and GAC filtration were tested after oxidation. An evaluation of the costs of these different treatments is also presented.     

组合添加剂对离子钯活化液稳定性的影响

研制出一种能够有效提高离子钯活化液稳定性的组合添加剂。实验结果表明:以乙酸钠、对苯二酚、维生素C为组合添加剂时,能有效提升离子钯活化液的稳定性,并改善化学镀镍层的性能。     

Complexation of Surfactant/β‐Cyclodextrin to Inhibit Surfactant Adsorption onto Sand,Kaolin, and Shale for Applications in Enhanced Oil Recovery Processes. Part I: Static Adsorption Analysis

Surfactant adsorption onto solid surfaces is a major issue during surfactant flooding in enhanced oil recovery applications; it decreases the effectiveness of the chemical injection making the process uneconomical. Therefore, it was hypothesized that the adsorption of surfactant onto solid surfaces could be inhibited using a surfactant delivery system based on the complexation between the hydrophobic tail of anionic surfactants and β‐cyclodextrin (β‐CD). Proton nuclear magnetic resonance spectroscopy was used to confirm the complexation of sodium dodecyl sulfate (SDS)/β‐CD. Surface tension analysis was used to establish the stoichiometry of the complexation and the binding constant (K_a). Static adsorption testing was applied to determine the adsorption of surfactant onto different solids (sandstone, shale, and kaolinite). The release of the surfactant from the β‐CD cavity was qualitatively evaluated through bottle testing. The formation of the inclusion complex SDS/β‐CD with a 1:1 stoichiometry was confirmed. The K_a of the complexations increases as salinity and hardness concentration increases. The encapsulation of the surfactant into the β‐CD cavity decreases the adsorption of surfactant onto solid surfaces up to 79 %. Qualitative observations indicate that in the presence of solid adsorbents partially saturated with crude oil, the β‐CD cavity releases surfactant molecules, which migrate towards the oil–water interface.     

New Approach for Optimization of Ozone-Hydrogen Peroxide Water Treatment

A new radical reaction model for the ozone-hydrogen peroxide treatment, which was much simpler than current models such as SBH and TFG, has been developed by computer simulation in order to investigate a new reactor for this treatment process. It was revealed that the simulation results by using this new developed model were in good agreement with the experimental results in terms of the variation in the concentration of ozone in both gas and liquid phase, hydrogen peroxide and TOC, indicating the appropriateness of this new model. Thus, it was considered that this new model was very convenient for analysis of radical reactions because of its simplicity.     

Complexation of Surfactant/β‐Cyclodextrin to Inhibit Surfactant Adsorption onto Sand,Kaolin, and Shale for Applications in Enhanced Oil Recovery Processes. Part III: Oil Displacement Evaluation

This proof of concept research evaluates the performance of a surfactant/β‐cyclodextrin (β‐CD) inclusion complex during chemical flooding for enhanced oil recovery. It was hypothesized that the encapsulated surfactant propagates well through the porous media. Sodium dodecyl sulfate (SDS) was used to study the surfactant/β‐CD complexations. Phase behavior analysis was carried out to prepare the most favorable chemical slug formulation. A series of core flooding tests were conducted to determine the efficiency of the SDS/β‐CD inclusion complex in displacing residual oil. Surfactant flooding was conducted as tertiary oil recovery mode (after mature water flooding) by injecting 0.3 pore volume (PV) of the optimum surfactant slug that was chased by 0.3 PV of a polymer slug; followed by continuous water flooding until oil production stopped. The experimental results indicate that the encapsulated surfactant propagates well through the sandpack system and consistently produces higher incremental oil recoveries that range from 40 to 82 % over the incremental oil recovery achieved by conventional surfactant flooding.     

Ozonated Olive Oil with a High Peroxide Value for Topical Applications: In-Vitro Cytotoxicity Analysis with L929 Cells

Previous studies have shown that ozonated vegetable oils have been used topically for healing of cutenous wounds. The aim of this study is to evaluate the dose dependent use of ozonated olive oil with high peroxide value (OZ) on the viability of cells for preventing side effects in topical applications. To the best of our knowledge, there are no reports investigaing the effect of peroxide value of ozonated olive oil associated with its cytotoxic activity on mouse non-neoplastc fibroblast cell lines (L929). Therefore, the present study was carried out by using OZ alone and/or in combination with glycerol and olive oil. In our study OZ was prepared by using pure olive oil. Both olive oil and glycerol are non-toxic and can be mixed with OZ uniformly. The cytotoxic activity of samples against L929 fibroblasts was assessed using the tetrazolium salt 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyltetrazolium bromide (MTT) assay. The peroxide value of synthesized OZ was found to be in the range of 2700–2900 mEq O₂/kg oil. The OZ/olive oil group did not show any cell death at all concentrations tested (p > 0.05) however OZ/glycerol group showed statistically significant reductions in viability at higher concentrations (p = 0.004–0.006) compared to the control group. Conclusively, using OZ/olive oil with a peroxide value of 2700–2900 mEq O₂/kg oil for short-term incubation was non-cytotoxic to the L929 fibroblast cell line.     

表面活性剂存在下火焰原子吸收光谱法测定合金钢中的钼

研究了在火焰原子吸收光谱法中阳离子型表面活性剂十二烷基三甲基氯化铵对钼的增感作用。在仪器工作最佳条件及合适的酸存在下,１０ｇ·Ｌ－１十二烷基三甲基氯化铵可使钼的吸光度增感４４．５％,且能消除多种共存元素的干扰。建立了钼的质量分数大于０．２９％的合金钢中钼的测定方法     

Antistatic Modification of Lead Styphnate and Lead Azide for Surfactant Applications

Lead styphnate (LS) and lead azide (LA) must be considered vulnerable to accumulation and discharge of static charge under all conditions. To reduce the risk aroused by static initination hazard in the processing and handling of LS and LA, antistatic modifations of LS and LA are necessary. In this paper, four surfactants were applied to improve the antistatic abilities of lead styphnate and lead azide. The results showed that lauryl dimethylamine betaine (BS‐12) is significantly able to reduce the electrostatic accumulation of LS and LA. In addition, possible correlations of electrostatic accumulation with assumption and approximation could be drawn from the surfactant surface concentration. The electrostatic sensitivities, the 5 s delay explosion temperatures, and the thermal decomposition profiles of the compounds were measured. Selected products were additionally investigated by scanning electron microscopy (SEM). For LS the performance of the products with additives was less affected, whereas for LA the sensitivity of the products in the presence of surfactants was distinctly reduced. The surfactants which are preferably compatible with LS and LA do not affect their thermal stability.