Controlling the Diameter of Electrospun Yttria‐Stabilized Zirconia Nanofibers

This work reports the precise diameter control of electrospun yttria‐stabilized zirconia (YSZ) nanofibers from 200 to 900 nm after calcination. Fabricated YSZ nanofibers showed porous nanocrystalline structures with high aspect ratios of more than 500:1 and high surface‐to‐volume ratios with a specific surface area of 43.32 m²/g. The diameter of the YSZ nanofibers increased with the viscosity of the precursor solution, which was controlled by the concentrations of either polymers (polyacrylonitrile) or ceramic precursors (YSZ). We present a modified correlation between the diameter of a nanofiber and the synthetic conditions, as the observed behavior for calcined ceramic nanofibers deviated from the expected behavior. Our results demonstrate a modified but simple approach to fabricate ceramic nanofibers with desired diameters, providing a new design guideline for many electrochemical applications.     

Electrospun polymeric nanofibers for dental applications

Electrospinning is an economical, efficient, and versatile process for the preparation of continuous nanofibers with desired patterns, tailored fiber diameters, and orientations. Since its invention, electrospinning has been utilized to prepare nanofibers from several natural polymers and synthetic polymers for use as scaffolds in tissue engineering, regeneration, and biomedical applications. Furthermore, complex scaffolds were prepared by electrospinning complex polymer solutions formulated by blending natural and synthetic organic polymers with bioceramics and other inorganic molecules. Lately, coaxial electrospinning has emerged as a promising technology in the preparation of drug-loaded biodegradable core-shell structured micro/nanofibers for sustained drug delivery applications. This paper will discuss the basic mechanism of electrospinning, parameters governing the electrospinning process, various materials investigated for use in the electrospinning process, and its recent advances.     

In Vitro Biocompatibility and Antibacterial Activity of Electrospun Ag Doped HAp/PHBV Composite Nanofibers

The authors report herein in vitro antibacterial property and osteoblast biocompatibility of electrospun Ag doped HAp/PHBV (Ag-HAp/PHBV) composite nanofibers as an osteoconductive and antibacterial material for bone tissue engineering applications. Ag-HAp powders were synthesized and stable composite suspensions of Ag-HAp/PHBV were prepared with the aid of a cationic surfactant DTAB for the electrospinning process. Continuous and uniform composite nanofibers were generated within a diameter range of 400–900 nm. Obtained nanocomposite scaffolds provide a favorable environment for bone mineralization, SaOS-2 osteoblastic cell attachment and growth as well as they present antibacterial activity against E. coli and S. aureus bacteria without any noticeable cytotoxic effect.     

Studying the Potential Application of Electrospun Polyethylene Terephthalate/Graphene Oxide Nanofibers as Electroconductive Cardiac Patch

Nowadays, engineering‐based cardiac patches aim to accelerate cardiac regeneration in myocardial infarcted tissues. Considering the fundamental role of cardiac electrophysiology in myocardial function, this study aims to investigate graphene oxide (GO) incorporation in the polyethylene terephthalate (PET) nanofibrous scaffold, as a conductive cardiac patch. The PET/GO nanocomposites are prepared using the uniaxial nozzle and coaxial nozzle electrospinning processes and comprehensively evaluated. The morphological observation indicates a uniform beaded free morphology with an average diameter of 147 ± 38 and 253 ± 67 nm for solid and core–shell nanocomposite fibers, respectively. Addition of GO to the PET nanofibers in a concentration of 0.05 wt% remarkably increases the Young modulus of mats from 30 ± 0.03 to 60 ± 0.02 and 69 ± 0.08 MPa for solid and core–shell nanofibers, respectively. Also, the electroconductivity is improved from 0.7 × 10^?6 to 1.175 × 10^?6 and 1.3 × 10^?6 S cm^?1 for solid and core–shell nanofibers, which are in the range of cardiac electroactivity values. PET/GO substrate interestingly supports human umbilical vein endothelial cells’ spreading morphology and cardiomyocyte elongated morphology, mainly where the GO nanosheets are distributed near the surface of nanofibers. In conclusion, the core–shell electrospun PET/GO nanocomposite fibers are suggested as a potential electroactive cardiac patch to improve cardiac cell attachment and proliferation.     

Improving Mechanical Properties of Carbon/Epoxy Composite by Incorporating Functionalized Electrospun Polyacrylonitrile Nanofibers

Electrospun functionalized polyacrylonitrile grafted glycidyl methacrylate (PAN‐g‐GMA) nanofibers are incorporated between the plies of a conventional carbon fiber/epoxy composite to improve the composite's mechanical performance. Glycidyl methacrylate (GMA) is successfully grafted onto polyacrylonitrile (PAN) polymer powder via a free radical mechanism. Characterization of the electrospun PAN and PAN‐g‐GMA nanofibers indicates that the grafting of GMA does not significantly alter the tensile properties of the PAN nanofibers but results in an increase in the diameter of nanofibers. Statistical analysis of the mechanical characterization studies on PAN‐carbon/epoxy hybrid composites conclusively shows that the composite reinforced with functionalized PAN nanofibers has greater mechanical properties than that of both the neat PAN nanofiber enriched hybrid composite and control composite (without nanofibers). The improved performance is attributed to the grafted glycidyl groups on PAN, leading to stronger interactions between the nanofibers and the epoxy matrix. PAN‐g‐GMA nanofiber reinforced composite outperforms their neat PAN counterparts in tensile strength, short beam shear strength, flexural strength, and Izod impact energy absorption by 8%, 9%, 6%, and 8%, respectively. Compared to the control composite, the improvements resulting from the PAN‐g‐GMA nanofiber incorporation are even more pronounced at 28%, 41%, 32%, and 21% in the corresponding tests, respectively.

     

Electrospun Nanofibers Membranes for Effective Air Filtration

In modern society, traffic and transportation and the manufacturing industry and construction industries continuously release large amounts of dust and particles into the atmosphere, which can cause heavy air pollution, leading to health hazards. The haze disaster, a serious problem in developing countries such as China and India, has become one of the main issues of global environmental pollution in recent decades. Many air filtration technologies have been developed. Air filtration using electrospun fibers that intercept fine particles/volatile organic gases/bacterium is a relatively new, but highly promising, technique. Due to their interconnected nanoscale pore structures, highly specific surface areas, fine diameters, and porous structure as well as their ability to incorporate active chemistry on a nanoscale surface, electrospun fibers are becoming a promising versatile platform for air filtration. In this review, following a short introduction concerning the need for air filtration and filtration theory and mechanism, electrospun nanofibers membranes for air filtration have been highlighted, including the preparation (electrospinning process) and the parameters relevant to filtration efficacy. Additionally, various types (function) of the electrospun air filtration membranes have been classified in detail. Furthermore, their potential in the filtration of fine particles and chemical pollutants has been discussed. Finally, the challenges of their practical application and the future prospects have been summarized. Given that some advanced electrospun air filtration nanofibrous membranes exist for treating different contaminants from various types of polluted atmosphere, it is believed that they should make a significant contribution in protection against air pollution.

     

Dual Electric Field Induced Alignment of Electrospun Nanofibers

A dual‐field method is described to produce aligned fibers by electrospinning. By applying a secondary electric field perpendicular to the primary field, control over the orientation of the fibers on the collector is obtained. The dual‐field approach is used in conjunction with dual electrodes and a rotating collector. Both approaches were used to electrospin poly(lactic acid) fibers under conditions intended to produce fibers with a diameter greater then 400 nm to aid observation by optical microscopy and digital photography. Digital photography was used to visualize a large area of aligned fiber and image analysis software was used to quantify the degree of alignment. Fibers aligned with the aid of a dual field showed better alignment than those from a single electric field under otherwise identical conditions.

     

Fabrication and DOE Optimization of Electrospun Chitosan/Gelatin/PVA Nanofibers for Skin Tissue Engineering

Chitosan/gelatin-based nanofibers display excellent biological performance in tissue engineering because of their biocompatible composition and nanofibrous structure with a high surface-to-volume ratio mimicking the native extracellular matrix. In this study, to save time and cost of experiments, a response surface methodology based on Box–Behnken design (BBD) is developed to predict the mean diameter of (chitosan:gelatin)/poly(vinyl alcohol) (PVA) nanofibers in three volume ratios of chitosan:gelatin by considering PVA percentage, applied voltage, and flow rate as input variables. The morphology and chemical composition of nanofibers are investigated through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The optimum conditions to yield the minimum diameter of nanofibers with chitosan:gelatin ratios of 25:75, 50:50, and 75:25 are found and result in 165, 121, and 92 nm, respectively, which show good accordance with BBD estimated results. The tensile testing indicates that nanofibers containing higher ratio of chitosan:gelatin result in higher tensile stress and lower toughness and tensile strain. The water contact angle analysis (WCA) shows the appropriate hydrophilicity of crosslinked nanofibers. The MTT assay shows excellent cell viability and cell attachment of nanofibers for mouse fibroblast (L929) cells. The results indicate that optimum nanofibers are potent candidates for wound healing applications.     

A Precursor Approach to Electrospun Polyaniline Nanofibers for Gas Sensors

Polyaniline (PANI) has served as one of the most promising conducting materials in a variety of fields including sensors, actuators, and electrodes. Fabrication of 1D PANI fibers using electrospinning methods has gained a significant amount of attention. Due to the extremely poor solubility of PANI in common organic solvents, fabrication of electrospun PANI fiber has been carried out either by using corrosive solvents such as H₂SO₄ or by electrospinning in the presence of other matrix polymers. Herein, a new approach to the fabrication of PANI fibers using tert‐butyloxycarbonyl‐protected PANI (t‐Boc PANI) as the conducting polymer precursor is reported. The t‐Boc PANI is soluble in common organic solvents (e.g., chloroform and tetrahydrofuran), and electrospinning of t‐Boc PANI in those solvents affords nano/micrometer‐sized t‐Boc PANI fibers. Treatment of the electrospun t‐Boc PANI fibers with HCl results in the removal of the acid labile t‐Boc group and the generation of conducting (≈20 S cm^?1) PANI fibers. The HCl‐doped PANI fibers are successfully used in the detection of gaseous ammonia with a detection limit of 10 ppm.

     

静电纺再生丝素纳米纤维的结构与性能

静电纺丝获得的丝素纳米级纤维可作为细胞培养支架,用于纺丝工艺及后处理能改变丝素微细结构,影响其水溶性和力学性能。本文采用XRD、FTIR、固态13CNMR和DSC研究了不同工艺下丝素纳米纤维及经甲醇处理后的微细结构,比较了不同微细结构下的水溶性和力学性能。结果表明,电纺丝的微细结构受纺丝工艺影响,高电压、纺丝液中丝素质量分数大时纺得的电纺丝结晶度高,经甲醇处理后,β化程度提高;w(丝素)=11%、15%时制备的电纺丝断裂强度分别为8.5、11.9 cN/mm;w(丝素)=11%、19%,水溶性由51.2%下降到43.3%;w(丝素)=19%、电压32 kV制得的电纺丝甲醇处理前后水溶性从43.3%下降到6.6%,说明丝素纳米纤维结晶度提高,强度增加、水溶性下降,满足了细胞支架的要求。     

Electrospun Nanofibers for Sensing and Biosensing Applications—A Review

Sensors and biosensors have found applications in many areas, e.g., in medicine and clinical diagnostics, or in environmental monitoring. To expand this field, nanotechnology has been employed in the construction of sensing platforms. Because of their properties, such as high surface area to volume ratio, nanofibers (NFs) have been studied and used to develop sensors with higher loading capacity, better sensitivity, and faster response time. They also allow to miniaturize designed platforms. One of the most commonly used techniques of the fabrication of NFs is electrospinning. Electrospun NFs can be used in different types of sensors and biosensors. This review presents recent studies concerning electrospun nanofiber-based electrochemical and optical sensing platforms for the detection of various medically and environmentally relevant compounds, including glucose, drugs, microorganisms, and toxic metal ions.     

Fabrication of Multifunctional Composite Nanofibers by Green Electrospinning

The present work takes advantage of green electrospinning to create novel composite multifunctional nanofibers (NFs) bearing inorganic nanoparticles (NPs), more specifically quantum dots (QDs), cerium oxide nanoparticles (CeO₂ NPs) and iron oxide nanoparticles (Fe₃O₄ NPs). This is achieved by first encapsulating the desired inorganic NPs into polymer particles by the use of miniemulsion polymerization, and second, spinning the hybrid polymer particles using polyvinyl alcohol (PVA) as template polymer. It is proved that using green electrospinning, it is not only possible to ensure an excellent distribution and encapsulation of the inorganic NPs along the NFs, but also allows to control and change the concentration, size, and type of the inorganic NPs without altering the NFs size, a fact that is not possible by conventional solution electrospinning. As proof of concept, NFs with up to three different types of inorganic NPs have been created in a single electrospinning step, but this technology allows to incorporate as much inorganic NPs as desired without altering the NFs morphology and ensuring a good distribution and encapsulation of the NPs. This paper demonstrates that green electrospinning is a powerful and attractive technology to create multifunctional NFs that are promising materials for sensing and biomedical applications.     

静电纺丝制备复合纳米纤维方法的研究进展

近年来,复合纳米纤维因其具有优异的特性而引起国内外广泛关注.简要阐述了静电纺丝制备纯纳米纤维的方法,重点综述了静电纺丝构建复合纳米纤维方法的研究进展。     

Role of Draw Rate and Molecular Weight when Electrospun Nanofibers are Post-Drawn with Residual Solvent

The postdrawing process is poorly understood for polymer nanofibers due to the difficulty of manipulating nanofiber structures. Here, an angled track system facilitates postdrawing of individual nanofibers with control of parameters including molecular weight, draw rate, draw ratio, and solvent evaporation time. In this study, the effects of molecular weight, draw rate, and relative residual solvent content on final nanofiber properties are investigated. Molecular weight is first investigated to clarify any influence polymer chain length can have on drawing in facilitating or hindering chain extensibility. Polyacrylonitrile nanofibers with 50 and 150 kDa molecular weights behave similarly with postdrawing resulting in reduced diameters and enhanced mechanics. Since solvent quantity during drawing is a time sensitive component it is meaningful to assess the impact of draw rate on the chemical and structural makeup of postdrawn fibers. Chemical bond vibrations and chain orientation are sensitive to draw rate when polycaprolactone nanofibers are dried for 3 minutes prior to postdrawing, but this dependency to draw rate is not observed when fibers are postdrawn immediately upon collection. These findings demonstrate that the amount of retained solvent at collection is relevant to this postprocessing approach, and highlights the dynamics of solvent evaporation during postdrawing.     

Synthesis and Substrate-Aided Alignment of Porphyrinated Poly(ethylene oxide) (PEO) Electrospun Nanofibers

Aligned and unaligned vanadium (IV) oxide meso-tetraphenyl porphine (VMP)/polyethylene oxide (PEO) hybrid nanofibers have been successfully synthesized by electrospinning technique. The nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), atomic force microscopy (AFM), optical microscopy and scanning electron microscopy (SEM). The SEM and AFM analyses of the morphology showed that the nanofibers are cylindrical with diameters ranging from 400–700 nm. The AFM analysis also confirmed that the aligned nanofibers deposited on a small metallic spring are smoother than the unaligned ones deposited on FTO. FTIR analysis showed that the polar environment provided by the phenyl groups of VMP molecules modified the chemical configuration of PEO molecules, and XRD studies indicated that the VMP molecules were homogeneously distributed within the PEO matrix.     

Dual Drug Release Electrospun Core-Shell Nanofibers with Tunable Dose in the Second Phase

This study reports a new type of drug-loaded core-shell nanofibers capable of providing dual controlled release with tunable dose in the second phase. The core-shell nanofibers were fabricated through a modified coaxial electrospinning using a Teflon-coated concentric spinneret. Poly(vinyl pyrrolidone) and ethyl cellulose were used as the shell and core polymer matrices respectively, and the content of active ingredient acetaminophen (APAP) in the core was programmed. The Teflon-coated concentric spinneret may facilitate the efficacious and stable preparation of core-shell nanofibers through the modified coaxial electrospinning, where the core fluids were electrospinnable and the shell fluid had no electrospinnability. The resultant nanofibers had linear morphologies and clear core-shell structures, as observed by the scanning and transmission electron microscopic images. APAP was amorphously distributed in the shell and core polymer matrices due to the favorite second-order interactions, as indicated by the X-ray diffraction and FTIR spectroscopic tests. The results from the in vitro dissolution tests demonstrated that the core-shell nanofibers were able to furnish the desired dual drug controlled-release profiles with a tunable drug release amount in the second phase. The modified coaxial electrospinning is a useful tool to generate nanostructures with a tailored components and compositions in their different parts, and thus to realize the desired functional performances.     

Fabrication of Chitosan/Silk Fibroin Composite Nanofibers for Wound-dressing Applications

Chitosan, a naturally occurring polysaccharide with abundant resources, has been extensively exploited for various biomedical applications, typically as wound dressings owing to its unique biocompatibility, good biodegradability and excellent antibacterial properties. In this work, composite nanofibrous membranes of chitosan (CS) and silk fibroin (SF) were successfully fabricated by electrospinning. The morphology of electrospun blend nanofibers was observed by scanning electron microscopy (SEM) and the fiber diameters decreased with the increasing percentage of chitosan. Further, the mechanical test illustrated that the addition of silk fibroin enhanced the mechanical properties of CS/SF nanofibers. The antibacterial activities against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) were evaluated by the turbidity measurement method; and results suggest that the antibacterial effect of composite nanofibers varied on the type of bacteria. Furthermore, the biocompatibility of murine fibroblast on as-prepared nanofibrous membranes was investigated by hematoxylin and eosin (H&E) staining and MTT assays in vitro, and the membranes were found to promote the cell attachment and proliferation. These results suggest that as-prepared chitosan/silk fibroin (CS/SF) composite nanofibrous membranes could be a promising candidate for wound healing applications.     

Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Electrospun Poly(l‐Lactic Acid) Nanofibers for Nanogenerator and Diagnostic Sensor Applications

This paper presents for the first time that poly(l ‐lactic acid) (PLLA) nanofibers can show the piezoelectricity along the fiber direction (d₃₃) by using an electrospinning method. First, the electrospun fiber bundles are characterized by scanning electron microscope, X‐ray, and piezoelectric coefficient measurements. The data show that the supercritical CO₂ treatment can greatly enhance the piezoelectricity of electrospun PLLA fibers, which can be resulting from the increased crystallinity of the fibers. Later, it is found that the electrospun PLLA fiber can generate a current of 8 pA and a voltage of 20 mV by a simple push–release process. Further, a single PLLA fiber‐based blood pulse sensor is also fabricated and tested and shows around a 2 pA output for blood pulse. Due to easy fabrication and relatively simple structure, this device enables a broad range of promising future applications in the medical sensor area.