共查询到18条相似文献,搜索用时 130 毫秒
1.
2.
Gk1C型内燃机车冷却水泵,常会因机械密封失效,发生漏水,影响机车正常运转。经分析和实践,表明采用优质的机械密封材料或在水泵上建立多重密封结构,问题能成功解决。 相似文献
3.
通过调整高压氨水泵填料套与机械密封衬套的配合间隙,消除泵体径向振动,提高了水泵的有效利用率,延长了高压氨水泵的使用寿命,提高了消烟除尘装煤效果。 相似文献
4.
5.
阐述了水泵密封的在线修复技术的必要性,介绍了注入式软填料密封的原理及其应用。 相似文献
6.
7.
利用新型密封材料代替传统密封填料,既达到可靠的密封又减少设备维护工作量,同时降低水泵的运行电流,节能效果显。 相似文献
8.
1问题的提出冶金系统离心式水泵主要应用于供排水系统,循环冷却系统、水渣处理系统等。多年来,离心式水泵轴向密封一直采用石墨盘根密封,它是通过盘根与旋转轴(轴套)之间紧密结合形成的一层很薄的环状润滑油膜实现密封,这层油膜来自所用的盘根。盘根密封中设计有水封结构,由水封管,水封环等零件组成水封系统,水封管一端接高压外来水,另一端接填料箱,高压水引入填料环,填料环夹在多圈盘根中间,填料环上有槽和水封孔,它将水封管上引来的水分布到轴套和填料之间,起到冷却和密封作用。以上密封结构经常出现以下问题:1)密封上… 相似文献
9.
集装式机械密封在水泵中的应用 总被引:1,自引:0,他引:1
针对武钢三炼钢水泵泄漏严重并影响生产的问题,着重从盘根密封、分离式机械密封、集装式机械密封3种密封形式的比较入手,结合设备、密封介质及集装式机械密封进行考查、研究、论证,直至集装式机械密封应用于水泵中。可为解决同类设备密封问题提供参考。 相似文献
10.
针对-510 m、-333 m井下临时水泵房IH100-65-315/75KW水泵使用过程中出现的轴承使用寿命短、轴承箱轴承孔同轴度公差尺寸差和轴密封泄漏等问题,采取了相应的改造措施。试验对比研究表明,经过水泵技术改造后,仅在-510 m泵房的应用每年可节约电量5×104 kWh,年节约电费支出3万余元;通过安装DSF动密封填料后,由于水泵泄漏量减少,水泵排水量明显增大;水泵的技术改造,减轻了维修工作量,使备件消耗下降,提高了设备完好率和利用率,降低了故障率,为生产创造了良好的条件,改造效果明显。 相似文献
11.
分析日本酉岛强制循环泵的结构,及在熔炼炉余热锅炉水循环系统中的应用情况,针对发生的机械密封泄漏情况,指出机械密封失效原因,提出检查及修复方法,保证热水循环泵长周期稳定运行,延长机械密封使用周期。 相似文献
12.
13.
介绍了一种新型的铁合金水循环冷却系统中水泵无填料轴封设备,对其结构、密封原理、性能特点、实际使用效果及推广使用中需注意的问题进行阐述。 相似文献
14.
介绍了近年来出现的一种新型专利技术产品,即无填料水泵轴封,并对其结构、密封机理、性能特点及推广使用中应注意的的问题进行阐述。 相似文献
15.
分析了某公司新水系统存在的问题,提出了通过自动跟踪压力变化,自动调整电机转速,来改变水泵的运行扬程,使水泵保持在经济扬程上运行的改造方案。运行后克服了新水系统水泵扬程高于生产扬程造成的运行.损耗,解决了制约新水系统不能恒压供水的问题,降低了供水单耗和人力资源消耗。 相似文献
16.
高压水射流技术综述 总被引:7,自引:0,他引:7
刘忠伟 《湖南冶金职业技术学院学报》2005,5(3):330-333
水射流是一项迅速崛起的新技术、新工艺,同时又是以射流为核心,集泵、阀、密封、液压、自动化控制为一体的综合学科.文章主要介绍了水射流的起源、发展概况及其应用,并对其发展趋势进行了展望. 相似文献
17.
K Yamazaki P Litwak RL Kormos T Mori O Tagusari JF Antaki M Kameneva M Watach L Gordon M Umezu J Tomioka H Koyanagi BP Griffith 《Canadian Metallurgical Quarterly》1997,43(5):M686-M691
A compact centrifugal blood pump was developed as an implantable left ventricular assist system. The impeller diameter is 40 mm and the pump dimensions are 55 x 64 mm. This first prototype was fabricated from titanium alloy, resulting in a pump weight of 400 g including a brushless DC motor. Weight of the second prototype pump was reduced to 280 g. The entire blood contacting surface is coated with diamond like carbon to improve blood compatibility. Flow rates of over 7 L/min against 100 mmHg pressure at 2,500 rpm with 9 W total power consumption have been measured. A newly designed mechanical seal with a recirculating purge system ("Cool-Seal") is used as a shaft seal. In this seal system, seal temperature is kept under 40 degrees C to prevent heat denaturation of blood proteins. Purge fluid also cools the pump motor coil and journal bearing. The purge fluid is continuously purified and sterilized by an ultrafiltration filter incorporated into the paracorporeal drive console. In vitro experiments with bovine blood demonstrated an acceptably low hemolysis rate (normalized index of hemolysis = 0.005 +/- 0.002 g/100 L). In vivo experiments are currently ongoing using calves. Via left thoracotomy, left ventricular apex-descending aorta bypass was performed utilizing a PTFE (Polytetrafluoroethylene) vascular graft, with the pump placed in the left thoracic cavity. In two in vivo experiments, pump flow rate was maintained at 5-8 L/min, and pump power consumption remained stable at 9-10 W. All plasma free hemoglobin levels were measured at < 15 mg/dl. The seal system has demonstrated good seal capability with negligible purge fluid consumption (< 0.5 ml/ day). Both animals remain under observation after 162 and 91 days of continuous pump function. 相似文献